How to create same button on two page in a tab control?

Hello !
Now we are here again :-) We have a tabcontrol and want to be able to press the same button (a button that stops the program) on both pages of the tabcontrol. How can we do this?
Best regards!

It's not the function isn't developed. It's just that every object on the front panel has a corresponding object on the block diagram. Attached is an example of how to do it with two buttons.
By the way, if you've run out of room on your panel, it probably means your interface is too crowded. If that is so, I suggest you add more pages to the tab to make your interface more clear.
Try to take over the world!
Attachments:
stop.vi ‏19 KB

Similar Messages

How to create radio button between two slection screen

hello all.
could you please guide me how to create radio button between two SELECTION-SCREEN in screen painter.
Thank you,
srinivas

hi
SEE THIS CODE
REPORT ZNNR_REPORT NO STANDARD PAGE HEADING MESSAGE-ID ZNNR LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
        MATNR LIKE MARA-MATNR,
        WERKS LIKE MARC-WERKS,
        PSTAT LIKE MARC-PSTAT,
        EKGRP LIKE MARC-EKGRP,
       END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
        EBELN LIKE EKKO-EBELN,
        EBELP LIKE EKPO-EBELP,
        MATNR LIKE EKPO-MATNR,
        WERKS LIKE EKPO-WERKS,
        LGORT LIKE EKPO-LGORT,
       END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R3 RADIOBUTTON GROUP G2 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R3.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R4 RADIOBUTTON GROUP G2.
SELECTION-SCREEN COMMENT 5(20) TEXT-004 FOR FIELD R4.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
<b>rEWARD IF USEFULL</b>

How to progammatically show a specific page of a tab control

Hei,
i have a tab control, from which i want to display a specific page if a specific event occured.
must be simple, but i just cant find the control property for it.
... And here's where I keep assorted lengths of wires...

of course!!
thanks for showing me the obvious... i have been trying to get to more specific classes...
thanks a bunch
... And here's where I keep assorted lengths of wires...

How to create a button in pdf to jump to a specific location and highlight it....?

I have a problem in making a pdf-file interactive which I suspect will have to be solved by Javascript, but I don't know the exact solution. What I want to do is to be able to create a button on a page. Clicking this button will cause the pdf reader to go highlight a specific area (stored in the button information), either on the same page or another page. The functionality could also be achieved by the button searching for a specific and unique string in the document, and subsequently highlighting it. I have looked for this functionality in pdf's, but not been able to find it. Does it already exist?. If not, can anyone come up with a hint how it can be implemented? (Javascript, anyone?) Appreciate your feedback very much.

You will need to create custom web part editor. Look at the following example. It also have added button and its events. I am sure you can use this sample as base and code your logic.
http://msdn.microsoft.com/en-us/library/hh228018(v=office.14).aspx
Amit

How to create SAVE button in Workbook using BI IP Functionality

Hi All,
I have Real-time Infocube (ZCUBSDID) with me. Planning has been done on the cube using BI-IP (like Aggregation level, filter, planning function and planning sequence are present there).
As an Input i have everything in Quality system like I can access query in Bex Anlyzer (Input Ready Query) and also i have workbook associated with the query. SAVE button is also present on workbook which is giving result based on fiscal year and version.
Now my task is to create workbook on Development system with the same functionality as Quality System.
I have same Query available on DEV system also. I created new Workbook but SAVE button is not available in my workbook.
Can anyone suggest how to create SAVE button in my new workbook.
I am new in IP side so please let me know if i can get any help from workbook which is already present in Quality system.
Which type of analysis i should do to come out with solution.....otherwise let me know step by step procedure to create SAVE button on workbook using BI-IP functionality.
It will be great help. My advance thanks goes to you people.
Thanks,
Rupali Singh

Check points 19 & 20 on this link http://help.sap.com/saphelp_nw2004s/helpdata/en/43/a033e0f56e21b5e10000000a1553f6/frameset.htm.
Command to be called on SAVE button is SAVE_AREA as explained in the point 20.
Regards,
Deepti

How to create a calendar for two years in GL

how to create a calendar for two years in GL

Hi,
- Login into Oracle EBS and select a responsiblity with GL Superuser drants (e.g. General Ledger Super User)
- Navigate to Setup + Financials + Calendars and open the GUI Accounting (Navigation for R12)
- Query the used calendard (used from jour Set of Books/ Ledger via the GUI
- Enter for each Period (= Period Type 13, 16, 18,...) one Record, have a look to the existing data, used the same logic.
In the GUI, defined the calendar for 2 Years
Dirk

Create Item button on personalization page.

Hi,
I have Personailze Self Service Defn profile option enabled at site level. (User also set to YES).
However I don't see create item button on many pages personalization screen, (like HomePage, or some other page).
And on functional administrator responsibility's any page (like profile page in core, create Item is there).
Its been checked on other instances that the create item button appears there for the same pages in problem.
What can be the reason?
Abdul Wahid

Hi,
Talked to Anil enabled "FND: Personalization Seeding Mode / FND_PERSONALIZATION_SEEDING_MODE" personalization link. It worked (even though the documentation says that its only for oracle's internal usage).
Also related diagnostic story got via other cooleague with deeper cause of the problem and solution.
Need to set system profiles to change old personalizations - expected?
Abdul Wahid

How to create custom button by amending template in sc and change po screen

Hi,
Can anybody tell the steps that How to create custom button by amending the template in shopping cart or change purchase order screen.
Full points for the answer.
Edited by: shraman saha on Aug 17, 2008 6:44 PM

Hi,
I dont have any idea what you mean by Template for "Change Purchase Order" functionality. As far as i know there is a change button on the screen using which we go to the change mode and edit the PO.
About your other query: you do not require to download any HTML pages. To see the templates for PO go through the following path:
Transaction SE80 --> Internet options --> in the drop-down enter BBP_POC (for PO) --> Topic 99 --> HTML templates.
Then look for the following templates :
SAPLBBP_PO_UI_ITS 3000 --> for header basic data
SAPLBBP_PO_UI_ITS 4000 --> for item overview
SAPLBBP_PO_UI_ITS 4100 --> for item basic data
SAPLBBP_PO_UI_ITS 2200 --> for buttons.
Make appropriate changes to the screen and then publish it before using it. It is just like activating objects.
Hope this helps.
Thanks,
Pradeep

How to create a new tag in page properties in the sidekick of geometrrix page

how to create a new tag in page properties in the sidekick of geometrrix pagesame as basic, advanced, blue print??

Hi prachi,
Is it tag OR Tab ? Seems like you are looking for Tab. Look at [1] & overlay to custamize per your need. Or define at your page component.
[1] /libs/foundation/components/page/dialog/items/tabs/items
Thanks,
Sham

How can I view more than two pages at a time?

How can I view more man two pages at a time?
As a muscian reading digital sheets on Reader, being able to veiw as many as 3 to 5 pages at a time would be more helpful. Also, if it was possible to view any number of pages at time such as pages 1 and 2, 2 and 3, 3 and 4, or 5,6,7,and 8 instead of just 1 and 2 or 3 and 4 etc. my experience would be even better. thanks.

The only way I could make Reader show 4 pages was to
set View to 2 pages scrolling
zoom out to display four pages:
But for me that it to small to read anything...

How to create progress bar in web page!!!

Dear,
I do not know how to create progress bar in web page?
Please show me the way to solve it.
Best regards,
Huy

God your lucky/lazy
import java.awt.*;
import java.awt.event.*;
import java.applet.*;
import javax.swing.*;
import java.util.*;
import java.io.*;
public class ProgressBar extends Applet
private boolean isStandalone = false;
private int width;
private int height;
private double percentComplete;
private double fundsTarget;
private double fundsRaised;
private Properties values;
private String propertiesFile;
private JPanel jPanel1 = new JPanel();
private JProgressBar PB_FUNDS_PROGRESS = new JProgressBar();
private GridLayout gridLayout1 = new GridLayout();
private BorderLayout borderLayout1 = new BorderLayout();
private JPanel jPanel2 = new JPanel();
private JLabel jLabel1 = new JLabel();
private JLabel jLabel2 = new JLabel();
private JLabel jLabel3 = new JLabel();
private GridBagLayout gridBagLayout1 = new GridBagLayout();
private JPanel jPanel3 = new JPanel();
private JLabel jLabel4 = new JLabel();
//Construct the applet
public ProgressBar()
//Initialize the applet
public void init()
    try
      jbInit();
    catch(Exception e)
      e.printStackTrace();
//Component initialization
private void jbInit()
throws Exception
    fundsTarget = new Double( 100 ).doubleValue();
    fundsRaised = new Double( 50 ).doubleValue();
    PB_FUNDS_PROGRESS.setBackground(Color.green);
    PB_FUNDS_PROGRESS.setForeground(Color.red);
    this.setLayout(gridLayout1);
    jPanel1.setLayout(borderLayout1);
    jPanel2.setLayout(gridBagLayout1);
    jPanel1.setBackground(Color.white);
    jPanel2.setBackground(Color.white);
    jPanel3.setBackground(Color.white);
    jLabel2.setBackground(Color.white);
    jLabel1.setBackground(Color.white);
    jLabel3.setBackground(Color.white);
    jLabel4.setText(" ");
    jLabel1.setText(" ");
    jLabel2.setText(" ");
    jLabel3.setText(" ");
    this.setBackground(Color.white);
    this.add(jPanel1, null);
    jPanel1.add(PB_FUNDS_PROGRESS, BorderLayout.CENTER);
    jPanel1.add(jPanel2, BorderLayout.SOUTH);
    jPanel2.add(jLabel2, new GridBagConstraints(1, 0, 1, 1, 0.0, 0.0,
     GridBagConstraints.WEST, GridBagConstraints.NONE, new Insets(5, 0, 5, 0), 0, 0));
    jPanel2.add(jLabel1, new GridBagConstraints(2, 0, 1, 1, 0.0, 0.0,
     GridBagConstraints.CENTER, GridBagConstraints.NONE, new Insets(5, 150, 5, 5), 0, 0));
    jPanel2.add(jLabel3, new GridBagConstraints(0, 0, 1, 1, 0.0, 0.0,
     GridBagConstraints.WEST, GridBagConstraints.NONE, new Insets(6, 5, 4, 150), 0, 0));
    jPanel1.add(jPanel3, BorderLayout.NORTH);
    jPanel3.add(jLabel4, null);
    propertiesFile = this.getCodeBase().getFile().replaceAll("%20", " ")+"funds.properties";
    System.out.println("Properties file at " + propertiesFile);
    values = new Properties();
    try
      values.load(new FileInputStream(propertiesFile));
      fundsTarget = new Double( values.getProperty("TARGET", "100").toString() ).doubleValue();
      fundsRaised = new Double( values.getProperty("RAISED", "50").toString() ).doubleValue();
      System.out.println("target: " + fundsTarget + " raised: " + fundsRaised);
    catch (IOException ioe)
      System.err.println(ioe.getMessage());
    percentComplete = (fundsRaised/fundsTarget)*100;
    System.out.println(percentComplete);
//Start the applet
public void start()
    PB_FUNDS_PROGRESS.setMaximum(new Double(fundsTarget).intValue());
    PB_FUNDS_PROGRESS.setMinimum(0);
    repaint();
//Stop the applet
public void stop()
public void paint(Graphics g)
    Graphics2D g2 = (Graphics2D)g;
    PB_FUNDS_PROGRESS.setValue(new Double(fundsRaised).intValue());
    String percent = Double.toString(percentComplete).substring(0, 4);
    jLabel4.setText("Currently At " + percent + "%");
    jLabel1.setText("100%");
    jLabel2.setText("50%");
    jLabel3.setText("0%");
//Destroy the applet
public void destroy()
public String getAppletInfo()
    return "Funds progress applet by A really nice person";
}

How to create a button Widget

Hi,
Can any one tell me how to create a button widget,
I've created one & it can be seen in my plugin, but it doesn't work,
in .fr file i created the widget as,
ButtonWidget
           kEXTCODGoButtonWidgetID,
           kSysButtonPMRsrcId,
            kBindNone,                        // Binding ,kBindRight | kBindBottom,
            Frame(50,70,140,90)                    // Frame (l,t,r,b)
            kTrue, kTrue,                     // Visible, Enabled
            "Run", // PNGIconAttributes, new for InDesign 3.0
in DialogObserver.cpp
for AutoAttach & AutoDetach,,
AttachToWidget(kEXTCODGoButtonWidgetID, IID_ITRISTATECONTROLDATA, panelControlData)
DetachFromWidget(kEXTCODGoButtonWidgetID, IID_ITRISTATECONTROLDATA, panelControlData);
in ::update
WidgetID theSelectedWidget = controlView->GetWidgetID();
if (theChange == kTrueStateMessage)
//if (theSelectedWidget == kEXTCODGoButtonWidgetID
switch(theSelectedWidget.Get())
         case kEXTCODGoButtonWidgetID:
this->ViewOutput();
break;
please tell me what may be the wrong...

Hi,
Do you have any idea about how to get the class name (ex: kSplineItemBoss) from a ClassID.
I know how to get the class id;
                                                  ClassID unknownClassID = ::GetClass(unknown);
I found it from an example..
now i want to know which class name related to that ClassID..
Thanks.

How to create a button which unloads an iFrame and puts in its position another iFrame?

How to create a button which unloads an iFrame and puts in its position another iFrame?
It is very important for me if anyone could answer...
Thank you all in advance,
Frank

Ok I found it!!

How to create Dependent lov in OAF Page

Hi,
How to create Dependent lov in OAF Page. pls can any body help.
Regards,
Hanimi.

Hi,
Not sure whether you need dependent LOV or dependent poplist. But anyways, you can refer the below link for Dependent LOV
http://oraclearea51.com/component/content/article/98-oa-framework/372-dependent-lov-in-oaf.html
and for Dependent Poplist refer the below link:
http://oraclearea51.com/component/content/article/98-oa-framework/370-dependent-poplist-in-an-advanced-table-in-oaf.html
Regards,
Sudhakar Mani
http://oraclearea51.com/sudhakarmani

How to create radio button in reports

Hi Friends,
Can any body please tell how to create radio button in reports.
Thanks,
Nagendra

Hi Nagendra,
    But why do u need a single radio button, any specific reason...
try this
REPORT ZCHA1.
PARAMETERS : P_RAD1 RADIOBUTTON GROUP RAD,
             P_RAD2 RADIOBUTTON GROUP RAD.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'P_RAD2'.
      SCREEN-INVISIBLE = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.

How to create same button on two page in a tab control?

Similar Messages

Maybe you are looking for