HOW TO CREATE SAP BW DATA SOURCES FOR TDS REPORT?

Hi All,
How to create generic data source for these fields?
I have TDS report these names and field.
Pls anyone guide me..
PAN NUMBER
J_1IPANNO
VENDOR NAME (accont type - k)
LIFNR
POSTING DATE
BUDAT
WITHHOLDING TAX BASE
WT_QSSHH
WITHHOLDING TAX AMOUNT
WT_QBSHH
NAME OF WITHHOLD TAX TYPE
WITHT

Hi ,
Thanks for giving info.
How to add different tables in generic data source?
PAN NUMBER
J_1IPANNO
J_1IMOVEND
VENDOR NAME (accont type - k)
LIFNR
J_1IMOVEND
POSTING DATE
BUDAT
RBKP
WITHHOLDING TAX BASE
WT_QSSHH
WITH_ITEM
WITHHOLDING TAX AMOUNT
WT_QBSHH
WITH_ITEM
NAME OF WITHHOLD TAX TYPE
WITHT
WITH_ITEM

Similar Messages

How to create the generic data source for Labour costs report in BI (actual& plan costs)?

Hello Guru's
My requirement is to get the total labour costs in BEx analyzer.So i need to create custom DS for that. But i am not sure about the FICO tables which are having the Labour info..
I'm having the GR10 report from R/3 sidepls look at the document. But i am not sure about the report, how that built,and giude me on the report.
Please help on this to going forward.

Hi,
There are COOM data source which may suits your needs.
please check data source
0CO_OM_WBS_6
0CO_OM_WBS_3
Base tables are COSP and COSS.
Check about coom data source, if not suitable then go for custom data source.
About table cross verify with your source team.
Thanks

How to create 3.x data source in bi 7

Hi Guys,
can anyone tell me<b> how to create 3.x data source(emulated) in bi 7.0 </b>
pls reply me this is urgent
ravi

Ravi,
Please do not multiply the same question several times. The answer is given in the other replica:
how to create 3.x filesystem data source(emulated) in bi 7.0

Creating the text data source for 0OI_LIFNR(TD: Carrier (Number of vendor a

Hi
Have to create the text data source for this characteristic. Basically it is the same as 0Vendor here.
I want to make it delta enabled.
Am creating it on the view BIW_LFA1T(same as 0vendor)
Can anyone advise what can I use to make it delta enabled without any code.
Can I use numeric pointer like the 0Vendor_text.
Many Thanks and regards,
Kate.

when defining a data source through the admin web page, don't add '!' in front of the password.
! is needed only when configuring a data source in the mapViewerConfig.xml file.

CRM 7.0 - Enhancement of Data Sources for interactive Reporting

Hallo All,
I would like to know whether anybody has positive experience with the enhancement of CRM Data Sources for interactive Reporting. I read that the enhancement of Customer fields should be possible (Those Data Sources below the Hierarchy node /CRMBW/ROOT).
I have seen that the extract structure can be enhanced via RSA6 (as for other data sources).
Questions:
1. Which USEREXIT / BADI has to be used to fill the added fields?
2. Does it work?
Best regards

Hi!
Those DS are not meant to be enhanced manually but only by one of the following two ways:
1. Adding custom fields with the Application Enhancement Tool (AET) in the CRM UI.
2. Adding SAP fields with the Interactive Reporting Enhancement Workbench (IREW).
The AET is available since CRM 7.0. Please find more details in the SAP Help Portal:
<http://help.sap.com>
    SAP Business Suite
        SAP Customer Relationship Mgmt.
             SAP EHP1 for CRM 7.0
                 Application Help
                     WebClient UI Framework
                         Application Enhancement Tool
The IREW is available since CRM 7.0 EhP1. More details can be found inside TX CRMD_IREW or in the SAP Help Portal:
<http://help.sap.com>
    SAP Business Suite
        SAP Customer Relationship Mgmt.
             SAP EHP1 for CRM 7.0
                 Application Help
                     SAP Customer Relationship Management
                         Analytics
Best regards

How to create a linked data source with document libraries based on the same template?

I use SharePoint Foundation 2013, SP Designer and Visual Studio 2013 to my needs. But there are several things which i don't get.
I have a number of libraries which use the same template. I want to create a linked data source, that would contain them all, and if I add a library based on this template, the library would be added to the data sorce. Is it possible?
I tried creating linked data souces, but the view that it brings by default is limited(no sorting, etc.). How can it be modified?

I am planning to do my project on Linux with J2EE,Oracle technologies.You don't need to set up a DSN. Just use a JDBC connect string such as jdbc:oracle:thin:@localhost:1521:xe
~Jer

Error creating a new Data Source for Oracle connection

I'm trying to create a new data source connection to our
Oracle 10gR2 server using ColdFusion Administrator 6.1 Standard on
a Windows 2003 server.
I created a System DSN ODBC connection for Oracle. I can use
the ODBC connection when connecting an Access db to Oracle but when
I try to use it w/ ColdFusion Admin it generates the following
error message:
Connection verification failed for data source: sitest2
[]java.sql.SQLException: [Macromedia][SequeLink JDBC
Driver][ODBC Socket]internal error:
Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
The root cause was that: java.sql.SQLException:
[Macromedia][SequeLink JDBC Driver][ODBC Socket]internal error:
Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
Any help or recommendations would be greatly appreciated.
Tina

The schema/user is system and the password is alpha-numeric, upper/lower case, no special char ...
As a workaround I was able to add the password to the entry in the datasources.xml file and restarted BI Pub.
The JDBC is working ... I can test the connection successfully ... just wont save the entry
Edited by: tread on Oct 17, 2011 11:55 AM

How do I select a data source for my webapp?

Wel, I'm obviously not looking in the right manual because this ought to be like falling off a log!
I have developed a web application in JDeveloper 10.1.3 and I'm deploying it (using a WAR file) to an OC4J container in OAS 10.1.3.
I have created a JDBC data source (JNDI location jdbc/bmra89) to connect to a 9.2.0.7 Oracle database and testing this through the interface is successful. The data source is associated with a new Connection Pool.
I ensure that a default data-sources.xml file is NOT bundled into my WAR file from JDeveloper (because the database I want to connect to from the OAS is different to the database I want to connect to from the deployed web app) so it should be looking for one it builds itself. In fact, data-sources.xml exists in the j2ee/<webapp_name>/config directory that contains the details of the data source and connection pool I created.
During deployment of the generated WAR file, I have chosen to Edit the Deployment Plan and in here I have entered the name of the data source (jdbc/bmra89) into the box labelled "defaultDataSource" and the boxes labelled "connectorsPath" and "dataSourcesPath" I've left empty.
It all deploys OK, but when I try to access a page I get the following error:
500 Internal Server Error
JBO-30003: The application pool (model.AppModuleLocal) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1954)
So, any ideas where I'm going wrong? (I have to admit to being pretty lost with all this!)
Thanks,
Andy

Let's try to do this as easy as I'm capable of explaining.
Deploy the EAR to the Application server/OC4J standalone that you're trying to configure without modifying or removing any of the files in the EAR or WAR file and using all of the defaults.
Now start up the Application server control in you choice of web browser, my URL is http://localhost:8888/em.
After logging into the console select the "Adminstration" Link, and there will be List of Administration Tasks, one of which being the JDBC Resources under, Services.
After selecting the JDBC Resources "Go to Task" you will see 2 areas, Data Sources and Connection Pools. Somewhere in all of this you should see the jdev-connection-pool-bmra89, jdev-connection-managed-bmra89, and jdev-connection-native-bmra89.
I normally modify the jdev-connection-pool-xxxxx first to use the correct URL connection. IE- jdbc:oracle:thin:@localhost:1521:bmra89 to jdbc:oracle:thin:@138.51.128.100:1521:bmra89, changing localhost to a specific database IP address.
Then I'll click the Apply, and then go back and do the same to the jdev-connection-native-bmra89.
At this point you should be able to test the connections successfully, and get the Web Service to connect.
I hope I've covered it and that this helps, and you're not being thick. The data sources part of this stuff can be confusing.
Darren

How to change the jta-data-source for projects in EJB 3

Hi all,
Sorry my english! :)
I'm learning the EJB 3.0 and I'd like to change jta-data-source for projects in JDeveloper 10.1.3.1.
I explain:
In the same Application, I have a project with all Entitys and Session Beans. At the moment, the persistence.xml file is there with the jta-data-source tag.
I make a new project with JUnit (Cactus) for test the EJB's that I'd like jta-data-source reference the test database.
I make another project, with Servlet/JSP/JSF that use EJB's with interface and I'd like jta-data-source reference another database.
What kind of changes (workaround) I could make to solve this problem?
Thanks a lot!
Luciano

Hi,
There are COOM data source which may suits your needs.
please check data source
0CO_OM_WBS_6
0CO_OM_WBS_3
Base tables are COSP and COSS.
Check about coom data source, if not suitable then go for custom data source.
About table cross verify with your source team.
Thanks

SAP standard data sources for 0SD_C03 sales over view cube

Hi All,
Please any body can be give info on what are the SAP SD data sources connected to 0SD_C03 infocube
Regards
prasad

Hi,
Chekc in SAP hlep site...
Using the datasources are depends on your business.
rahuleaswar.pbworks.com/f/DesignSpec-+0SD_C03.doc
www.sembps.com/documentation/BW/SD/8_sales_analysis.doc
http://help.sap.com/saphelp_nw70/helpdata/en/90/d4f33b949b6b31e10000000a11402f/frameset.htm
Thanks
Reddy

Data source for SQR reporting

Is it possible to use the Brio Query or Report Results as a data source for an SQR report? Instead of accessing a database for an SQR, can I use the Results section instead?

N0 you need to create ur own generic datasource for line items - it is not delivered.
0FI_GL_4 reads BSEG and BKPF
where as the new Gl line items is based on table FAGLFLEXA

Universe as data source for Crystal Reports

Are there any issues in using a Universe as the data source for a crystal reports? We are using Business Objects Enterprise XI R2 and Crystal Reports XI R2.
Thanks in advance for your response,
Garet Wicker

Hi,
We can have a parameter from a Universe, following are the steps which will create the report which is based a Universe with a parameter.
-connect to the universe and you will a Query Panel.
-drag some objects in the Result Objects field. Ex. Country, Revenue.
-then drag an object in the Query Filter. Ex. Country.
-then a new window will appear as Filter Editor.
-Select the prompt option and also select the check box as u201CSelect only from listu201D.
-Click on Ok.
When you refresh the report then there will be a parameter prompting for the Country field. Also you will see a parameter created automatically in the parameter list.
However if you try to create a new parameter (without modifying anything from the query panel) by with the following workflow then there is no option to select the field for the parameter.
-Right click on Parameter fieldsu2014New parameter.
-When you click on the drop down list in the u201CValue Fieldu201D list there are no available fields/objects.
Hence we can create a parameter in CR which is connected to the Universe with the steps mentioned above.
I hope this helps you.
Regards,
Prashant.

2.5 GB CSV file as data source for Crystal report

Hi Experts,
I was asked to create a crystal report using crystal report as datasource(CSV file that is pretty huge (2.4Gb)). Could you help with me any doc that expalins the steps mainly with data connectivity.
Objective is to create Crystal Report using that csv file as data source, save the report as .rpt with the data and send the results to customer to be read with Crystal Reports Viewer or save the results to PDF.
Please help and suggest me steps as I am new to crystal reports and CSV as source.
BR, Nanda Kishore

Nanda,
The issue of having some records with comma and some with a semi colon will need to be resolved before you can do an import. Assuming that there are no semi colons in any of the text values of the report, you could do a "Find & Replace" to convert the semi colons to commas.
If find & replace isn't an option, you'll need to get the files separately.
I've never used the Import Export Wizzard myself. I've always used the BULK INSERT command
It would look something like this...
BULK INSERT SQLServerTableName
FROM 'c:\My_CSV_File.csv'
WITH (FIELDTERMINATOR = ',')
This of course implies that your table has the same columns, in the same order as the csv files and that each column is the correct data type to accept the incoming data.
If you continue to have issues getting your data into SQL Server Express, please post in one of these two forums
[Transact-SQL|http://social.msdn.microsoft.com/Forums/en-US/transactsql/threads]
[SQL Server Express|http://social.msdn.microsoft.com/Forums/en-US/sqlexpress/threads]
The Transact-SQL forum has some VERY knowledgeable people (including MVPs and book authors) posing answers.
I've never posed to the SQL Server Express but I'm sure they can trouble shoot your issues with the Import Export Wizard.
If you post in one of them, please copy the post link back to this thread you I can continue to to help.
Jason

How to create new JNDI Data source in Tomcat 5.0 server

hi ...
I have created new datasource but its giving an error like
ERROR: org.apache.commons.dbcp.SQLNestedException: Cannot create JDBC driver of class '' for connect URL 'null', cause: null
Nested Exception: java.lang.NullPointerException
please can anybody help me out to solve this bug ?
regards
djshivu

This problem is due to your files server.xml and web.xml. Have you modified them???
I ve the same problem, can you compare these files to mine (you can find my files here: http://forum.java.sun.com/thread.jspa?threadID=635640&tstart=0)

Switching Data Source for a report with stored procedure

Post Author: ysbn
CA Forum: Data Connectivity and SQL
I've created a report and deployed it on a Crystal Server. The report is based on a certain stored procedure which also exists on other DB machines in my environment (Oracle machines). When I try to switch my report object to work with other machines (not the one originally used when the report was designed) the activation of the report fails. The error I see in the preview window is:
Error in File <my rpt file name>: Failed to retrieve data from the database. Details: [Database Vendor Code: 6550 ]
When I try the same thing with a report which is based on a view and not a stored procedure the switching of Data Source works perfectly.
Is there a problem switching between data sources from the server when the report is based on stored procedure? Are there any configurations I need to do in order to support this scenario?
Thanks!

Hi everyone~
i am now facing the same problem
i am using CR2008 and Visual Studio 2008 c# to write a window program
because we have 2 db environment (one is production , the other one is development) so i have set a prarameter to switch db connection in c# code.
the database is Oracle, and the the report will connect to Oracle procedure (which it is stored in package) this procedure will return reference cursor, so the report will loop up this cursor to generate report.
at first time, it work fine when i open the report in CR2008 designer and point to dev database (ie datasource point to oracle procedure) . but when i want to deploy this win application to client and point to prod database, it show (vendor error 6550)
i found that i cannot change the datasource during runtime in c# code...
am i miss something in code? here attached a part of this code...
private void setDBLogonForReport(ConnectionInfo info, ReportDocument doc)
            Tables myTables = doc.Database.Tables;
            foreach (Table myTable in myTables)
                TableLogOnInfo logOnInfo = myTable.LogOnInfo;
                logOnInfo.ConnectionInfo = info;
                logOnInfo.TableName = myTable.Name;
                myTable.ApplyLogOnInfo(logOnInfo);
                //myTable.Location = info.UserID + "." + "pkg_crystal_report." + myTable.Name;
                //someone suggest i have to set the 'Location' for change the datasource, but i am not sure how to construct a
                //string for point to oracle prcedure
i will check it freq ... hope any expert can give me some advice ~
thank you very much!!!

HOW TO CREATE SAP BW DATA SOURCES FOR TDS REPORT?

Similar Messages

Maybe you are looking for