How to create Search Engine for a site

I have to create a search engine to search a 900 page web site. Most of the pages are JSPs. Is there any standard approach for doing this.
Thanks
sreenidhi

There are various open source search engines (notably HT://Dig) if you look for them. There are also quite a few people who offer search services on your site with their engine (such as google and Atomz.) It is probably easier to do this than to work on the epic job of writing your own.

Similar Messages

How to create Search Help for a field in Table control !!

Hello Friends,
 I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
Senthil

Check the sample code:
*& Include ZSRO_MPRN_SEARCH *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
 stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = c_x
 determine_loop_index = c_x
 TABLES
 dynpfields = lt_dynpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 MOVE lt_dynpfields-fieldvalue TO ws_outcode.
 ws_len = STRLEN( lt_dynpfields-fieldvalue ).
 IF ws_len GE 7.
 ws_len = ws_len - 3.
 ws_icode = ws_code+ws_len(3).
 lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
 CONCATENATE lt_dynpfields-fieldvalue '%'
 INTO ws_outcode.
 CONDENSE lt_dynpfields-fieldvalue.
 REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
 ELSE.
 CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
 INTO ws_outcode.
 ENDIF.
 ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 TABLES
 dynpfields = lt_dnpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode.
 ELSE.
MPRN blank and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1.
 ENDIF.
ELSE.
MPRN exist and Post code exist
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode AND
 mprn EQ lt_dnpfields-fieldvalue.
 ELSE.
MPRN exist and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE mprn EQ lt_dnpfields-fieldvalue.
 ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'MPRN'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select MPRN'
 value_org = 'S'
 TABLES
 value_tab = i_mprn1 "lt_mprn
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
 IF sy-subrc EQ 0.
Updating post code
 CONCATENATE i_mprn1-outcode i_mprn1-incode
 INTO ws_postcode
 SEPARATED BY space.
 MOVE ws_postcode TO i_mprn-post_code.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld-fieldvalue = ws_postcode .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
Updating MPRN
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld-fieldvalue = i_mprn1-mprn .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
 ENDIF.
ELSEIF sy-subrc EQ 2.
 MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE. "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
 stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = c_x
 determine_loop_index = c_x
 TABLES
 dynpfields = lt_dynpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 MOVE lt_dynpfields-fieldvalue TO ws_outcode.
 ws_len = STRLEN( lt_dynpfields-fieldvalue ).
 IF ws_len GE 7.
 ws_len = ws_len - 3.
 ws_icode = ws_code+ws_len(3).
 lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
 CONCATENATE lt_dynpfields-fieldvalue '%'
 INTO ws_outcode.
 CONDENSE lt_dynpfields-fieldvalue.
 REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
 ELSE.
 CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
 INTO ws_outcode.
 ENDIF.
 ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 TABLES
 dynpfields = lt_dnpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode.
 ELSE.
MPRN blank and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1.
 ENDIF.
ELSE.
MPRN exist and Post code exist
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode AND
 mprn EQ lt_dnpfields-fieldvalue.
 ELSE.
MPRN exist and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE mprn EQ lt_dnpfields-fieldvalue.
 ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'MPRN'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select MPRN'
 value_org = 'S'
 TABLES
 value_tab = i_mprn1 "lt_mprn
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
 IF sy-subrc EQ 0.
Updating MPRN
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld-fieldvalue = i_mprn1-mprn .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
 ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
Updating post code
 CONCATENATE i_mprn1-outcode i_mprn1-incode
 INTO ws_postcode
 SEPARATED BY space.
 MOVE ws_postcode TO i_mprn-post_code.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld-fieldvalue = ws_postcode .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
 break gblap0.
 ws_dynpfld-stepl = mprn-current_line.
 LOOP AT i_mprn.
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 MOVE ws_postcode TO i_mprn-post_code.
 MODIFY i_mprn INDEX
 mprn-current_line." transporting MPRN POST_CODE.
 ENDLOOP.
**code changed by laxman 10.08.2005
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
 ENDIF.
ELSEIF sy-subrc EQ 2.
 MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE. "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
 gntc LIKE iflot-zzgntc,
 END OF lt_gntc.
CLEAR: lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'ZZGNTC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select Gas Nomination Type Code'
 value_org = 'S'
 TABLES
 value_tab = lt_gntc
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE. "GNTC_F4 INPUT
*& Module mprn1_f4 INPUT
 text
MODULE mprn1_f4 INPUT.
DATA: lt_f4 TYPE ddshretval OCCURS 0 WITH HEADER LINE,
 lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
 lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
 lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
 stepl_index1 TYPE systepl.
DATA : i_dnpfld1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
 ws_dyname1 LIKE d020s-prog,
 ws_dynumb1 LIKE d020s-dnum,
 ws_dynpfld1 LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
 lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
 stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 determine_loop_index = 'X'
 TABLES
 dynpfields = lt_dynpfields1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'IFLOT'
 fieldname = 'I_MPRN-MPRN'
 searchhelp = 'ZS_MPRN_PC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 TABLES
 return_tab = lt_f4
 EXCEPTIONS
 field_not_found = 1
 no_help_for_field = 2
 inconsistent_help = 3
 no_values_found = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-mprn.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld1-fieldvalue = i_mprn-mprn.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-post_code.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld1-fieldvalue = i_mprn-post_code.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
ENDMODULE. " mprn1_f4 INPUT
*& Module pstlz1_f4 INPUT
 text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
 lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
 stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 determine_loop_index = 'X'
 TABLES
 dynpfields = lt_dynpfields1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'IFLOT'
 fieldname = 'I_MPRN-POST_CODE'
 searchhelp = 'ZS_MPRN_PC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 TABLES
 return_tab = lt_f4
 EXCEPTIONS
 field_not_found = 1
 no_help_for_field = 2
 inconsistent_help = 3
 no_values_found = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-post_code.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld1-fieldvalue = i_mprn-post_code.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-mprn.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld1-fieldvalue = i_mprn-mprn.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
ENDMODULE. " pstlz1_f4 INPUT
Regards,
Prakash.

How to create search path for the file on the desktop..

hello experts..
      I have used gui_upload module to upload the data from flatfile to the internal table, in that how can i create search path for the file selection in the selection screen, also please help me the code to update the ztable.
thanks

HI
If iam not wrong you want to select a file from a location that you don't know so if this is ur problem then use the function module
F4_FILENAME
this FM helps to locate and select the desired file from the system.
Sample code that you can check is
How to get windows filename
PARAMETERS: lv_file LIKE rlgrap-filename.
Method 1
    CALL FUNCTION u2019KD_GET_FILENAME_ON_F4u2019
    EXPORTING
    MASK = u2019,.txt,.*u2019
    STATIC = u2019Xu2019
    CHANGING
    FILE_NAME = LV_FILE.
Method 2
CALL FUNCTION u2019F4_FILENAMEu2019
EXPORTING
         program_name = syst-cprog
         dynpro_number = syst-dynnr
         field_name = u2019 u2019
     IMPORTING
         file_name   = LV_FILE.
Regards
Pavan

How to create Search Help For Ztable fields

Hi all,
Please let me know How to create Search Help in SE11(what are the parameter i should pass)
and How to maintain search help for Ztable fields at DIctionary level (in SE11) and programming level.

hello .
there are two types of search helps .
1. elementary search help .
2. collective serch help
Below are the steps to create elementary search helps :
1 In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
2.then youget a option elementary or collective search as per you r need .
3.select Elementary search help and choose
4.write explanatory text in the field Short text.
5. in the selection method give the name of the table or a view .
6 . Select the fields that should be used for value selection or in a hit list .
7. then define the attributes of the search help .
8 Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
9 .define the dialog type of the search help.
The dialog type tells how the hit list will be displayed in the input help.
10 . save and activate .
plz reward if usefull
Thanks ,
Abhishek .

How to create search help for field in interactive adobe form

HI
I want to create search help for PERNR field in adobe form.
how i can do it.
Can any one giud me.
Regards,
Laxman Sankhla

Hi Laxman,
Please search SDN, there are lots of queries posted and solved earlier on this.
especially there are step by step blogs.
Cheers,
Sai

How to implement search engine for pdf file.

Hi
I am newbie to AIR technolgy .how to implement search engine . when i enter the name of file in search box , it should fetch correspoding the pdf file .
Please help me out
Thanks
Mohan

Hi sekhar,
Your Requirement can be implemented by OVS(Object Value selector) This is the custom search help .So that you can define on what basis the value has to be fetched.
Look at the below link
http://wiki.sdn.sap.com/wiki/display/WDABAP/ABAPWDObjectValueSelector(OVS)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/606288d6-04c6-2c10-b5ae-a240304c88ea?quicklink=index&overridelayout=true
You need to use the component WDR_OVS.
It has 3 phases
In phase 1
     You will fetch the value from input field to F4 help dialog box.
In phase 2
     You will generate the search results , in this phase look for the input value given in field 2 and accordingly generate search result for the field 3.
In phase 3
     The selected value will be returned to the original screen.
Regards
Karthiheyan M

How to create search help for Web Dynpro?

Hi all,
I have troubles when creating search help for web dynpro. I have visited this link /people/dirk.rehberg/blog/2006/12/27/generic-search-help-for-web-dynpro-for-java but I can't find this generic search help plug-in for download. If u have this plug-in can u share it for me or upload somewhere for download. Or anyone has already done this search help please help me solve this problem! Thanks in advance!

Hi Dinh Thieu Thien,
please place such a request to the appropriate forum "[Web Dynpro for Java|Web Dynpro Java;".
Thanks and regards,
Boris

How to create search help for Maintanence View

Hi,
I want to create a Search Help for a Maintanence View and bring Conditions
in this Search Help. Condition can be as e.q. Show me only the Records with Status 2.
How can I achieve this?
Thanks.
Best Regards
Beserithan Malabakan

HI,
You can create this in SE11, there create a search help, and in the Minatain Search HElp screen, give the Maintanance view name and give the field anmes as you want, and right side you will find 'Default Values', there you can give the default values, so here in the Field name give as STATUS and in the Defaule Value will be 2.
Regards
Sudheer

How to create search engine in JSF page with AJAX

I want to create Java Server Faces page with search engine using AJAX. I'm interested can I do this with PL/SQL statement which searches strings into all Oracle tables at database level? What are the best practices in this case?

user10484841 wrote:
I want to create Java Server Faces page with search engine using AJAX.
I'm interested can I do this with PL/SQL statement which searches strings into all Oracle tables at database level? I give up.
Can you?
What are the best practices in this case?Best practice is to know where data is stored to avoid search of all Oracle tables.

How to create Search help for the field /SAPSLL/PRGEN-ATTR20V

Hi ,
I need to add a search help for the field /SAPSLL/PRGEN-ATTR20V and their is a chk table used for this field is /SAPSLL/TCOATV20.
In this table /SAPSLL/TCOATV20-ATTRV20V is a Primary key field.
How can I add search help for this field?
Any suggestions will be appreciated!
Regards,
Kittu

HI,
Fixed on my own..
I am closing this thread!
Thank you!
Kittu

How to customize search engines for the seach engine bar?

I updated my firefox recently. It used to be that when I used the search bar with google as a search engine, it would take me directly to the local google, i.e. google UK or Denkmark etc.. However, now it is firmly set on only directing me to google.com search results. - How do I get it back to use other googles and if that is not happening how can I manually search the google I want the search bar to look results up from?
== This happened ==
Every time Firefox opened
== I updated to 3.6.3

{Ctrl + K} which works in previous versions of Firefox, too.

How to create send connectors for multiple sites in the same domain?

Current Scenario:
We have 2 offices, 1 in London and 1 in India. Both are in the same domain and are connected via VPN. Both have their own separate Exchange 2003 server. Each location sends out their mail via the Default SMTP Virtual Server on their exchange server through
their local ISP. There are no Send connectors created currently.
We have now installed an additional Exchange 2010 server with Hub, CAS and Mailbox roles at the London site. Internal mail flow between the sites seems to be working fine.
I believe the Exchange 2010 needs a Send connector to send out mail to the internet. However as soon as we create a Send connector on Exchange 2010, mail from the older 2003 servers at both sites start to flow out from the exchange 2010 server. This is not
optimal for our India site since their outgoing mail now has to flow via the VPN to London and out via the new server.
How can we configure it so that each server sends outgoing mail independently?
Thanks

Hi,
In India site, you can create a SMTP connector which point to the local ISP.
Thanks.
Niko Cheng
TechNet Community Support

How to create search engine (with UIX and BC4J) across nested VOs?

Suppose I have N:N relationship beetween the DB tables so the intermediary table is created (PK is Primary Key, FK is foreign key):
table1 (PK_ID1, ATTR11, ATTR12...)
table2 (FK_ID1, FK_ID3) //where both FKs are Primary Key this is intermediary table
table3 (PK_ID3, ATTR31, ATTR32...)
The goal is to create a data model (ie EOs, VOs and AM) so that I can create a search page in UIX that would have search fields from tables 1 and 3 ! However, the search result display should return only table 1.
for example:
table1=INDIVIDUALS (IID, FIRST_NAME, LAST_NAME...)
table2=EMP_PHO(IID, PID)
table3=PHONES(PID, PHONE)
so an individual may have more than one phone and one phone may belong to more then one individual (ie family home phone)
and say, I want to search by phone number (PHONE) and to return individuals in a table?
Please help

Hai Nikhil,
Please find below sample code for your report logic.
REPORT ZJAK1.
tables:makt.
select * from makt where maktx like 'test%'.
write:/10 makt-maktx.
endselect.
output of this program
tested
test
test forcast
if useful please provide points.
Jaheer

How to create pretty url for webcentre sites generated url

Hi,
I want to make my url pretty .For this i am using my own assembler class which extends AbstractAssembler.
I register this assembler class with my webcentre sites.
Can any one suggest which method of AbstractAssembler class should i use to modify uri in browser.
What is the significance of AssemblyContext and DisassemblyContext classes and getpath and getQuery method .
Thanks,

Hello Ajay,
Instead of using that blog code, try to call the FM 'INM_UI_NAV_GET_OIF_URL'.
This FM takes import parameter, Object Type 'RIH' and the Object GUID (this is the 'GUID' field from /rpm/item_d and not the portfl_item_guid field) for specific item and gives you the item URL.
Let me know if you still face any issues.
Thanks,
Gaurav

HOW TO CREATE SEARCH HELP FOR A FIELD

HI EXPERTS,
 I NEED TO GET THE SEARCH HELP NAME FOR A FIELD.WHAT SHALL I DO ??MATNR HAS MAT1 AS SERACH HELP NAME BUT VBELN DOES'NT HAVE .IF I NEED TO ASSIGN SERACH HELP FOR A SELECTION SCREEN WHICH WILL GET VBELN AS INPUT WHAT I NEED TO DO ????
THANKS
MANI

Hi,
Please find the following code for your help.
Change the according to your table and field name.
& - SOC FOR F4 HELP ON SELECTION SCREEN 15.05.07 - &
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_UNIQUE.
SELECT UNIQ_RES_NO
 FROM zproject_res INTO CORRESPONDING FIELDS OF TABLE ITAB_HELP
 where flag = 'Z'.
SORT ITAB_HELP BY UNIQ_RES_NO .
DELETE ADJACENT DUPLICATES FROM ITAB_HELP.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
 retfield = 'UNIQ_RES_NO'
PVALKEY = ' '
 DYNPPROG = 'ZRPSTRESVSLIP'
 DYNPNR = '1000'
 DYNPROFIELD = 'P_UNIQUE'
STEPL = 0
WINDOW_TITLE = ' '
VALUE = ' '
 VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
tables
 value_tab = itab_help
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
& - EOC FOR F4 HELP ON SELECTION SCREEN 16.05.07 - &
Reward points for helpful answer
Debjani

How to create Search Engine for a site

Similar Messages

Maybe you are looking for