How to create search help for field in interactive adobe form

HI
I want to create search help for PERNR field in adobe form.
how i can do it.
Can any one giud me.
Regards,
Laxman Sankhla

Hi Laxman,
Please search SDN, there are lots of queries posted and solved earlier on this.
especially there are step by step blogs.
Cheers,
Sai

Similar Messages

How to create Search Help for a field in Table control !!

Hello Friends,
 I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
Senthil

Check the sample code:
*& Include ZSRO_MPRN_SEARCH *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
 stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = c_x
 determine_loop_index = c_x
 TABLES
 dynpfields = lt_dynpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 MOVE lt_dynpfields-fieldvalue TO ws_outcode.
 ws_len = STRLEN( lt_dynpfields-fieldvalue ).
 IF ws_len GE 7.
 ws_len = ws_len - 3.
 ws_icode = ws_code+ws_len(3).
 lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
 CONCATENATE lt_dynpfields-fieldvalue '%'
 INTO ws_outcode.
 CONDENSE lt_dynpfields-fieldvalue.
 REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
 ELSE.
 CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
 INTO ws_outcode.
 ENDIF.
 ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 TABLES
 dynpfields = lt_dnpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode.
 ELSE.
MPRN blank and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1.
 ENDIF.
ELSE.
MPRN exist and Post code exist
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode AND
 mprn EQ lt_dnpfields-fieldvalue.
 ELSE.
MPRN exist and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE mprn EQ lt_dnpfields-fieldvalue.
 ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'MPRN'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select MPRN'
 value_org = 'S'
 TABLES
 value_tab = i_mprn1 "lt_mprn
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
 IF sy-subrc EQ 0.
Updating post code
 CONCATENATE i_mprn1-outcode i_mprn1-incode
 INTO ws_postcode
 SEPARATED BY space.
 MOVE ws_postcode TO i_mprn-post_code.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld-fieldvalue = ws_postcode .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
Updating MPRN
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld-fieldvalue = i_mprn1-mprn .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
 ENDIF.
ELSEIF sy-subrc EQ 2.
 MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE. "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
 stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = c_x
 determine_loop_index = c_x
 TABLES
 dynpfields = lt_dynpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 MOVE lt_dynpfields-fieldvalue TO ws_outcode.
 ws_len = STRLEN( lt_dynpfields-fieldvalue ).
 IF ws_len GE 7.
 ws_len = ws_len - 3.
 ws_icode = ws_code+ws_len(3).
 lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
 CONCATENATE lt_dynpfields-fieldvalue '%'
 INTO ws_outcode.
 CONDENSE lt_dynpfields-fieldvalue.
 REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
 ELSE.
 CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
 INTO ws_outcode.
 ENDIF.
 ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 TABLES
 dynpfields = lt_dnpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode.
 ELSE.
MPRN blank and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1.
 ENDIF.
ELSE.
MPRN exist and Post code exist
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode AND
 mprn EQ lt_dnpfields-fieldvalue.
 ELSE.
MPRN exist and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE mprn EQ lt_dnpfields-fieldvalue.
 ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'MPRN'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select MPRN'
 value_org = 'S'
 TABLES
 value_tab = i_mprn1 "lt_mprn
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
 IF sy-subrc EQ 0.
Updating MPRN
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld-fieldvalue = i_mprn1-mprn .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
 ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
Updating post code
 CONCATENATE i_mprn1-outcode i_mprn1-incode
 INTO ws_postcode
 SEPARATED BY space.
 MOVE ws_postcode TO i_mprn-post_code.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld-fieldvalue = ws_postcode .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
 break gblap0.
 ws_dynpfld-stepl = mprn-current_line.
 LOOP AT i_mprn.
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 MOVE ws_postcode TO i_mprn-post_code.
 MODIFY i_mprn INDEX
 mprn-current_line." transporting MPRN POST_CODE.
 ENDLOOP.
**code changed by laxman 10.08.2005
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
 ENDIF.
ELSEIF sy-subrc EQ 2.
 MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE. "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
 gntc LIKE iflot-zzgntc,
 END OF lt_gntc.
CLEAR: lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'ZZGNTC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select Gas Nomination Type Code'
 value_org = 'S'
 TABLES
 value_tab = lt_gntc
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE. "GNTC_F4 INPUT
*& Module mprn1_f4 INPUT
 text
MODULE mprn1_f4 INPUT.
DATA: lt_f4 TYPE ddshretval OCCURS 0 WITH HEADER LINE,
 lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
 lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
 lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
 stepl_index1 TYPE systepl.
DATA : i_dnpfld1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
 ws_dyname1 LIKE d020s-prog,
 ws_dynumb1 LIKE d020s-dnum,
 ws_dynpfld1 LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
 lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
 stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 determine_loop_index = 'X'
 TABLES
 dynpfields = lt_dynpfields1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'IFLOT'
 fieldname = 'I_MPRN-MPRN'
 searchhelp = 'ZS_MPRN_PC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 TABLES
 return_tab = lt_f4
 EXCEPTIONS
 field_not_found = 1
 no_help_for_field = 2
 inconsistent_help = 3
 no_values_found = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-mprn.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld1-fieldvalue = i_mprn-mprn.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-post_code.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld1-fieldvalue = i_mprn-post_code.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
ENDMODULE. " mprn1_f4 INPUT
*& Module pstlz1_f4 INPUT
 text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
 lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
 stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 determine_loop_index = 'X'
 TABLES
 dynpfields = lt_dynpfields1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'IFLOT'
 fieldname = 'I_MPRN-POST_CODE'
 searchhelp = 'ZS_MPRN_PC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 TABLES
 return_tab = lt_f4
 EXCEPTIONS
 field_not_found = 1
 no_help_for_field = 2
 inconsistent_help = 3
 no_values_found = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-post_code.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld1-fieldvalue = i_mprn-post_code.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-mprn.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld1-fieldvalue = i_mprn-mprn.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
ENDMODULE. " pstlz1_f4 INPUT
Regards,
Prakash.

Create search helps for fields of custom tables

Hi,
Could any one please provide me the step by step process to create search helps for fields in custom tables?
Thanks in advance,
Nobin.

Hello Nobin
There is basically no difference between a search help for standard vs. customer tables.
An important choise is the selection method for your search help:
Either you use your custom table, a view or a search help user-exit if you need to implement very specific requirements.
Assuming that you can use your DB table as selection method the further implementation of the search help is quite straightforward:
(1) Define the parameters you would like to have a selection criteria (SPos = SPos) and which should appear on the result list (= LPos).
(2) Define the parameters that can be used as input for the selection (flag IMP) and are returned by the search help (flag EXP)
Regards
Uwe

How to create Search Help For Ztable fields

Hi all,
Please let me know How to create Search Help in SE11(what are the parameter i should pass)
and How to maintain search help for Ztable fields at DIctionary level (in SE11) and programming level.

hello .
there are two types of search helps .
1. elementary search help .
2. collective serch help
Below are the steps to create elementary search helps :
1 In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
2.then youget a option elementary or collective search as per you r need .
3.select Elementary search help and choose
4.write explanatory text in the field Short text.
5. in the selection method give the name of the table or a view .
6 . Select the fields that should be used for value selection or in a hit list .
7. then define the attributes of the search help .
8 Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
9 .define the dialog type of the search help.
The dialog type tells how the hit list will be displayed in the input help.
10 . save and activate .
plz reward if usefull
Thanks ,
Abhishek .

How to create search help for Web Dynpro?

Hi all,
I have troubles when creating search help for web dynpro. I have visited this link /people/dirk.rehberg/blog/2006/12/27/generic-search-help-for-web-dynpro-for-java but I can't find this generic search help plug-in for download. If u have this plug-in can u share it for me or upload somewhere for download. Or anyone has already done this search help please help me solve this problem! Thanks in advance!

Hi Dinh Thieu Thien,
please place such a request to the appropriate forum "[Web Dynpro for Java|Web Dynpro Java;".
Thanks and regards,
Boris

How to create Search help for the field /SAPSLL/PRGEN-ATTR20V

Hi ,
I need to add a search help for the field /SAPSLL/PRGEN-ATTR20V and their is a chk table used for this field is /SAPSLL/TCOATV20.
In this table /SAPSLL/TCOATV20-ATTRV20V is a Primary key field.
How can I add search help for this field?
Any suggestions will be appreciated!
Regards,
Kittu

HI,
Fixed on my own..
I am closing this thread!
Thank you!
Kittu

How to add search help for field in ALV object

Hello,
In a program, we use ALV object ( container) to create a liste like : field1, field2 .. but when display we do not have search help for this . Could you please help me how to add match code in this case for field 1 and field2, We use set_table_for_first_display
Thanks,

Hi,
when you define your field catalogue you can create data elements with search help in se11 and use them for field 1 and field 2.
But maybe it is enough to use data elements belonging to a domain with a value help and to set field F$AVAILABL in the field catalogue or to fill the name of the field CHECKTABLE.
Regards,
Klaus

How to create search help for Maintanence View

Hi,
I want to create a Search Help for a Maintanence View and bring Conditions
in this Search Help. Condition can be as e.q. Show me only the Records with Status 2.
How can I achieve this?
Thanks.
Best Regards
Beserithan Malabakan

HI,
You can create this in SE11, there create a search help, and in the Minatain Search HElp screen, give the Maintanance view name and give the field anmes as you want, and right side you will find 'Default Values', there you can give the default values, so here in the Field name give as STATUS and in the Defaule Value will be 2.
Regards
Sudheer

HOW TO CREATE SEARCH HELP FOR A FIELD

HI EXPERTS,
 I NEED TO GET THE SEARCH HELP NAME FOR A FIELD.WHAT SHALL I DO ??MATNR HAS MAT1 AS SERACH HELP NAME BUT VBELN DOES'NT HAVE .IF I NEED TO ASSIGN SERACH HELP FOR A SELECTION SCREEN WHICH WILL GET VBELN AS INPUT WHAT I NEED TO DO ????
THANKS
MANI

Hi,
Please find the following code for your help.
Change the according to your table and field name.
& - SOC FOR F4 HELP ON SELECTION SCREEN 15.05.07 - &
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_UNIQUE.
SELECT UNIQ_RES_NO
 FROM zproject_res INTO CORRESPONDING FIELDS OF TABLE ITAB_HELP
 where flag = 'Z'.
SORT ITAB_HELP BY UNIQ_RES_NO .
DELETE ADJACENT DUPLICATES FROM ITAB_HELP.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
 retfield = 'UNIQ_RES_NO'
PVALKEY = ' '
 DYNPPROG = 'ZRPSTRESVSLIP'
 DYNPNR = '1000'
 DYNPROFIELD = 'P_UNIQUE'
STEPL = 0
WINDOW_TITLE = ' '
VALUE = ' '
 VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
tables
 value_tab = itab_help
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
& - EOC FOR F4 HELP ON SELECTION SCREEN 16.05.07 - &
Reward points for helpful answer
Debjani

How to create F1 help for fields of a table in SM30

I have a z-table which is being maintained using SM30. while creating new entries for the z-table using this SM30 i want to create F1 help which will be useful for the user to create new entries. can anyone pls help we this requirement?

Hi Lalitha,
To have F1 help documentation, you need to create Documentation by pressing Documentation button in the Change Data Element screen (SE11)
If you need certain values for the field through F4 help then you need to specify the values in the Domain of this Data element (SE11)
Jogeswara Rao K

Creating Search Help for Web Dynpro ABAP (FPM) Forms

Dear All ,
I am very new with SAP HCM P&F with FPM form. I am stuck with field search help functionality in FPM form. I have created on search help using
Web dynpro component to get all travel requests for all employees and linked it to FPM form field and its working fine....
But.... my requirement is how to filter travel request based on the PERNR (employee number) field in FPM form.
I think it can be achieved by using importing parameter LISTENER of interface IF_WD_VALUE_HELP_LISTENER but I am clueless how to pass PERNR to this interface to get travel requests for only employee number in field PERNR.
Kindly help me out in this issue.
Chohan

Use this code in set_value_help_listener
for e.g to read effective date.
wd_this->help_listener->f4_context_element->get_attribute( EXPORTING name = 'EFFECTIVE_DATE' IMPORTING value = wd_this->gv_eff_date ).

Creating search help for a field in AdHoc Query

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

CLM How to add search-help for extension field(New Company Field) in MA.

Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyCheng

Hello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma

How to add search help for standard field LIKP-TRAID

Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
Abhi

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

Search help for fields in custom table..

hi,
in my custom table i have two fields - table name and field name. when user selects table name as VBAP , for field names i need all the fields in VBAP to be displayed and for that I set the check table as DD03L and I am able to see all the fields. But i am not able to see the description of the fields rather seeing field name , other key fields of DD03L.
How do i get to display something like
field name - description - length (length of the field as defined in DDIC)
If search help will help then can u pl tell me how to create one ? or any standard can be used ?
thanks

Yes, you need to create search help and assign it to the field 'field name'
Please search SDN for how to create search help. There are 100's of threads with this
By the way the texts can be found in table DD03T for tables as well as for fields

How to create search help for field in interactive adobe form

Similar Messages

Maybe you are looking for