How to create Serach help in SRM?

Hi all,
Can you please guide me how to create a search help in SRM?
I would like to display seach help for the custom field on SRM Portal.
Which are the steps / procedure to display search help in SRM Portal?
Thanks in advance.
Regards,
Hemant

Hi Hemant,
Hope this link may help you Adjusting SRM searchhelp using BBP_F4_READ_ON_ENTRY / BBP_F4_READ_ON_EXIT?
Regards,
Pravin

Similar Messages

  • How to create a help view for a customized error message

    Hi all,
    Can you guide me how to create a help view for a customized error message, we need to put some suggestions in it so that user can can resolve this issue with this guide. ( the short text is too short to describe all situations via TC:SE91)
    Thanks very much!
    Bruce, Wen

    Hi Bruce,
    Could you brief your concerns again.
    Why don't you maintain long text in message class for long description.
    Regards,
    Ranjith N

  • How to create Search Help for a field in Table control !!

    Hello Friends,
                  I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
    Thanks,
    Senthil

    Check the sample code:
    *&  Include           ZSRO_MPRN_SEARCH                                 *
    MODULE PSTLZ_F4 INPUT
    MODULE pstlz_f4 INPUT.
    reading post code
      DATA: stepl TYPE systepl,
            stepl_index TYPE systepl.
      CLEAR: stepl, stepl_index.
      CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
      lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
      lt_dynpfields-stepl     = stepl.
      APPEND lt_dynpfields. CLEAR lt_dynpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = c_x
          determine_loop_index = c_x
        TABLES
          dynpfields           = lt_dynpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields INDEX 1.
      ENDIF.
      ws_outcode  = lt_dynpfields-fieldvalue.
      stepl_index = lt_dynpfields-stepl.
      REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
      IF NOT lt_dynpfields-fieldvalue IS INITIAL.
        MOVE lt_dynpfields-fieldvalue TO ws_outcode.
        ws_len = STRLEN( lt_dynpfields-fieldvalue ).
        IF ws_len GE 7.
          ws_len = ws_len - 3.
         ws_icode = ws_code+ws_len(3).
          lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
          CONCATENATE lt_dynpfields-fieldvalue '%'
              INTO ws_outcode.
          CONDENSE lt_dynpfields-fieldvalue.
       REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
        ELSE.
          CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
            INTO ws_outcode.
        ENDIF.
       ws_ocode = ws_code+0(3).
      ENDIF.
    reading MPRN
      CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
      lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
      lt_dnpfields-stepl     = stepl_index.
      APPEND lt_dnpfields. CLEAR lt_dnpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
        TABLES
          dynpfields           = lt_dnpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dnpfields INDEX 1.
      ENDIF.
    MPRN blank and Post code exist
      IF lt_dnpfields-fieldvalue IS INITIAL.
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode.
        ELSE.
    MPRN blank and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1.
        ENDIF.
      ELSE.
    MPRN exist and Post code exist
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode AND
                       mprn EQ lt_dnpfields-fieldvalue.
        ELSE.
    MPRN exist and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE mprn EQ lt_dnpfields-fieldvalue.
        ENDIF.
      ENDIF.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'MPRN'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          window_title    = 'Select MPRN'
          value_org       = 'S'
        TABLES
          value_tab       = i_mprn1 "lt_mprn
          return_tab      = lt_returntab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc EQ 0.
        READ TABLE lt_returntab INDEX 1.
        READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
        IF sy-subrc EQ 0.
    Updating post code
          CONCATENATE i_mprn1-outcode  i_mprn1-incode
                        INTO ws_postcode
                             SEPARATED BY space.
          MOVE ws_postcode TO i_mprn-post_code.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-POST_CODE'.
          ws_dynpfld-fieldvalue = ws_postcode .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
    Updating MPRN
          MOVE i_mprn1-mprn TO i_mprn-mprn.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-MPRN'.
          ws_dynpfld-fieldvalue = i_mprn1-mprn .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
        ENDIF.
      ELSEIF sy-subrc EQ 2.
        MESSAGE s005(zspa) WITH ws_postcode .
      ENDIF.
    ENDMODULE.                    "PSTLZ_F4 INPUT
    MODULE MPRN_F4 INPUT
    MODULE mprn_f4 INPUT.
    reading post code
    DATA: stepl TYPE systepl,
           stepl_index TYPE systepl.
      CLEAR: stepl, stepl_index.
      CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
      lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
      lt_dynpfields-stepl     = stepl.
      APPEND lt_dynpfields. CLEAR lt_dynpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = c_x
          determine_loop_index = c_x
        TABLES
          dynpfields           = lt_dynpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields INDEX 1.
      ENDIF.
      ws_outcode = lt_dynpfields-fieldvalue.
      stepl_index = lt_dynpfields-stepl.
      REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
      IF NOT lt_dynpfields-fieldvalue IS INITIAL.
        MOVE lt_dynpfields-fieldvalue TO ws_outcode.
        ws_len = STRLEN( lt_dynpfields-fieldvalue ).
        IF ws_len GE 7.
          ws_len = ws_len - 3.
         ws_icode = ws_code+ws_len(3).
          lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
          CONCATENATE lt_dynpfields-fieldvalue '%'
              INTO ws_outcode.
          CONDENSE lt_dynpfields-fieldvalue.
       REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
        ELSE.
          CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
            INTO ws_outcode.
        ENDIF.
       ws_ocode = ws_code+0(3).
      ENDIF.
    reading MPRN
      CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
      lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
      lt_dnpfields-stepl     = stepl_index.
      APPEND lt_dnpfields. CLEAR lt_dnpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
        TABLES
          dynpfields           = lt_dnpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dnpfields INDEX 1.
      ENDIF.
    MPRN blank and Post code exist
      IF lt_dnpfields-fieldvalue IS INITIAL.
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode.
        ELSE.
    MPRN blank and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1.
        ENDIF.
      ELSE.
    MPRN exist and Post code exist
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode AND
                       mprn EQ lt_dnpfields-fieldvalue.
        ELSE.
    MPRN exist and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE mprn EQ lt_dnpfields-fieldvalue.
        ENDIF.
      ENDIF.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'MPRN'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          window_title    = 'Select MPRN'
          value_org       = 'S'
        TABLES
          value_tab       = i_mprn1 "lt_mprn
          return_tab      = lt_returntab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc EQ 0.
        READ TABLE lt_returntab INDEX 1.
        READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
        IF sy-subrc EQ 0.
    Updating MPRN
          MOVE i_mprn1-mprn TO i_mprn-mprn.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-MPRN'.
          ws_dynpfld-fieldvalue = i_mprn1-mprn .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
    **code changed by laxman 10.08.2005
         ws_dynpfld-stepl  = mprn-current_line.
    **code changed by laxman 10.08.2005
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
    Updating post code
          CONCATENATE i_mprn1-outcode  i_mprn1-incode
                        INTO ws_postcode
                             SEPARATED BY space.
          MOVE ws_postcode TO i_mprn-post_code.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-POST_CODE'.
          ws_dynpfld-fieldvalue = ws_postcode .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
    **code changed by laxman 10.08.2005
         break gblap0.
         ws_dynpfld-stepl  = mprn-current_line.
         LOOP AT i_mprn.
           MOVE i_mprn1-mprn TO i_mprn-mprn.
           MOVE ws_postcode TO i_mprn-post_code.
           MODIFY i_mprn INDEX
                    mprn-current_line." transporting MPRN POST_CODE.
         ENDLOOP.
    **code changed by laxman 10.08.2005
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
        ENDIF.
      ELSEIF sy-subrc EQ 2.
        MESSAGE s006(zspa) WITH i_mprn1-mprn .
      ENDIF.
    ENDMODULE.                    "MPRN_F4 INPUT
    MODULE GNTC_F4 INPUT
    MODULE gntc_f4 INPUT.
      DATA: BEGIN OF lt_gntc OCCURS 0,
              gntc LIKE iflot-zzgntc,
            END OF lt_gntc.
      CLEAR:   lt_returntab, lt_gntc.
      REFRESH: lt_returntab, lt_gntc.
      lt_gntc-gntc = 'DM'.
      APPEND lt_gntc. CLEAR lt_gntc.
      lt_gntc-gntc = 'NDM'.
      APPEND lt_gntc. CLEAR lt_gntc.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'ZZGNTC'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          window_title    = 'Select Gas Nomination Type Code'
          value_org       = 'S'
        TABLES
          value_tab       = lt_gntc
          return_tab      = lt_returntab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc EQ 0.
        READ TABLE lt_returntab INDEX 1.
        i_mprn-dm_ndm = lt_returntab-fieldval.
      ENDIF.
    ENDMODULE.                    "GNTC_F4 INPUT
    *&      Module  mprn1_f4  INPUT
          text
    MODULE mprn1_f4 INPUT.
      DATA: lt_f4          TYPE ddshretval OCCURS 0 WITH HEADER LINE,
            lt_returntab1  LIKE ddshretval OCCURS 0 WITH HEADER LINE,
            lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
            lt_dnpfields1  LIKE dynpread OCCURS 0 WITH HEADER LINE.
      DATA: stepl1 TYPE systepl,
            stepl_index1 TYPE systepl.
      DATA : i_dnpfld1      LIKE dynpread OCCURS 0 WITH HEADER LINE,
             ws_dyname1     LIKE d020s-prog,
             ws_dynumb1     LIKE d020s-dnum,
             ws_dynpfld1    LIKE dynpread.
      CLEAR: i_dnpfld1,  ws_dyname1, ws_dynumb1, ws_dynpfld1,
             lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
             stepl1, stepl_index1.
      REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
    To Determine Steploop Index
      lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
      lt_dynpfields1-stepl     = stepl1.
      APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
          determine_loop_index = 'X'
        TABLES
          dynpfields           = lt_dynpfields1
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields1 INDEX 1.
      ENDIF.
      stepl_index1 = lt_dynpfields1-stepl.
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
        EXPORTING
          tabname           = 'IFLOT'
          fieldname         = 'I_MPRN-MPRN'
          searchhelp        = 'ZS_MPRN_PC'
          dynpprog          = sy-repid
          dynpnr            = sy-dynnr
        TABLES
          return_tab        = lt_f4
        EXCEPTIONS
          field_not_found   = 1
          no_help_for_field = 2
          inconsistent_help = 3
          no_values_found   = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Update tablecontrol
      READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-mprn.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-MPRN'.
        ws_dynpfld1-fieldvalue = i_mprn-mprn.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
      CLEAR  : i_dnpfld1, ws_dynpfld1.
      REFRESH: i_dnpfld1.
      READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-post_code.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-POST_CODE'.
        ws_dynpfld1-fieldvalue = i_mprn-post_code.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    ENDMODULE.                 " mprn1_f4  INPUT
    *&      Module  pstlz1_f4  INPUT
          text
    MODULE pstlz1_f4 INPUT.
      CLEAR: i_dnpfld1,  ws_dyname1, ws_dynumb1, ws_dynpfld1,
              lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
              stepl1, stepl_index1.
      REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
    To Determine Steploop Index
      lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
      lt_dynpfields1-stepl     = stepl1.
      APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
          determine_loop_index = 'X'
        TABLES
          dynpfields           = lt_dynpfields1
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields1 INDEX 1.
      ENDIF.
      stepl_index1 = lt_dynpfields1-stepl.
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
        EXPORTING
          tabname           = 'IFLOT'
          fieldname         = 'I_MPRN-POST_CODE'
          searchhelp        = 'ZS_MPRN_PC'
          dynpprog          = sy-repid
          dynpnr            = sy-dynnr
        TABLES
          return_tab        = lt_f4
        EXCEPTIONS
          field_not_found   = 1
          no_help_for_field = 2
          inconsistent_help = 3
          no_values_found   = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Update tablecontrol
      READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-post_code.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-POST_CODE'.
        ws_dynpfld1-fieldvalue = i_mprn-post_code.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
      CLEAR  : i_dnpfld1, ws_dynpfld1.
      REFRESH: i_dnpfld1.
      READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-mprn.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-MPRN'.
        ws_dynpfld1-fieldvalue = i_mprn-mprn.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    ENDMODULE.                 " pstlz1_f4  INPUT
    Regards,
    Prakash.

  • Can we create serach help for a selection screen field

    Can we create serach help for a selection screen field with out creating searchhelp object.
    I mean is it possible to create serchelp in the program itself with some specific values i want to give.
    E.g say we can define any internal table and fill it with values and using that into selection screen fields
    Regards
    Mave

    AT SELECTION-SCREEN ON VALUE-REQUEST FOR paymeth.
      PERFORM PAYMENT_HELP.
    FORM PAYMENT_HELP.
      DATA: begin of DESCR_TAB occurs 0,
            DESCR LIKE BKPF-BKTXT,
            END OF DESCR_TAB.
      DATA: gd_repid like sy-repid.
      gd_repid = sy-repid.
      DESCR_TAB-DESCR = 'aaaaa'.
      append DESCR_TAB.
      DESCR_TAB-DESCR = 'bbbbb'.
      append DESCR_TAB.
      DESCR_TAB-DESCR = 'ccccc'.
      append DESCR_TAB.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
           EXPORTING
                retfield    = 'DESCR'
                DYNPPROG    = gd_repid
                DYNPNR      = '1000'
                DYNPROFIELD = 'paymeth'
                VALUE_ORG   = 'S'
                DISPLAY     = ' '
           TABLES
                value_tab   = DESCR_TAB.
    endform.
    Svetlin

  • How to create Search Help For Ztable fields

    Hi all,
    Please let me know How to create Search Help in SE11(what are the parameter i should pass)
    and How to maintain search help for Ztable fields at DIctionary level (in SE11) and programming level.

    hello .
    there are two types of search helps .
    1. elementary search help .
    2. collective serch help
    Below are the steps to create elementary search helps :
    1 In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose  Create.
    2.then youget a option elementary or collective search as per you r need .
    3.select Elementary search help and choose
    4.write explanatory text in the field Short text.
    5. in the selection method give the name of the table or  a view .
    6 . Select the fields that should be used for value selection  or in a hit list .
    7. then define the attributes of the search help .
    8 Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
    9 .define the  dialog type of the search help.
    The dialog type tells  how the hit list will be displayed in the input help.
    10 . save and activate .
    plz reward if usefull
    Thanks ,
    Abhishek .

  • How to create search help on a parameter

    Hi all,
              How to create search help on a parameter .Please tell me process .
    Regards,

    Hi,
    If you want to create search help in parameter check that search help is available
    by going to se11 or
    create search help there ..
    Please check the following links to create a search helps. They guide you step by ste.
    Link:[http://www.sap-img.com/abap/attach-a-search-help-to-the-screen-field.htm]
    Regards
    Vinu.r

  • How to create POV help

    Hi all,
    Please tell me how to create POV help for module pool.
    Regards,

    hi,
    Try this
    PROCESS ON VALUE-REQUEST.
    * Module to fetch the branch value
    * from the screen
      FIELD zval_discount-zbranch
      MODULE value_branch.
    * field Discount type WRT Branch
      FIELD zval_discount-zdisctyp
      MODULE f4_help_discount_type .
    MODULE value_branch INPUT.
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
        EXPORTING
          tabname           = 'ZVAL_DISCOUNT'
          fieldname         = 'ZBRANCH'
          dynpprog          = sy-repid
          dynpnr            = sy-dynnr
          dynprofield       = 'ZBRANCH'
        EXCEPTIONS
          field_not_found   = 1
          no_help_for_field = 2
          inconsistent_help = 3
          no_values_found   = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDMODULE.                 " value_branch  INPUT
    MODULE f4_help_discount_type INPUT.
      REFRESH :
        i_dynpread,
        r_branch,
        i_disctyp.
      CLEAR   wa_dynpread.
      IF sy-dynnr = '0120'.
        wa_dynpread-fieldname = 'ZVAL_DISCOUNT-ZBRANCH'.
        APPEND wa_dynpread TO i_dynpread .
    * Function module to read the value of ZBRANCH on the screen 120.
        CALL FUNCTION 'DYNP_VALUES_READ'
          EXPORTING
            dyname               = sy-repid
            dynumb               = sy-dynnr
            translate_to_upper   = 'X'
          TABLES
            dynpfields           = i_dynpread
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            invalid_parameter    = 7
            undefind_error       = 8
            double_conversion    = 9
            stepl_not_found      = 10
            OTHERS               = 11.
        IF sy-subrc EQ 0.
          READ TABLE i_dynpread INDEX 1 INTO wa_dynpread.
          IF sy-subrc EQ 0.
            MOVE wa_dynpread-fieldvalue TO zval_discount-zbranch.
          ENDIF.
        ELSE.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ELSE.
        CLEAR v_stepl.
        CALL FUNCTION 'DYNP_GET_STEPL'
          IMPORTING
            povstepl        = v_stepl
          EXCEPTIONS
            stepl_not_found = 1
            OTHERS          = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        READ TABLE g_val_disc_maint_itab INTO g_val_disc_maint_wa
        INDEX v_stepl.
        IF sy-subrc EQ 0.
          zval_discount-zbranch = g_val_disc_maint_wa-zbranch.
        ENDIF.
      ENDIF.
      IF NOT zval_discount-zbranch IS INITIAL.
        r_branch-sign = 'I'.
        r_branch-option = 'EQ'.
        r_branch-low = zval_discount-zbranch.
        APPEND r_branch.
      ENDIF.
    * Fetch the recods of purchase type for the
    *  branch selected on the screen
      SELECT *
        FROM zval_disctyp
        INTO TABLE i_disctyp
       WHERE zbranch IN r_branch.
    * Function module for F4 help for the field Purchase Type
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          ddic_structure  = 'ZVAL_DISCTYP'
          retfield        = 'ZDISCTYP'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          dynprofield     = 'ZVAL_DISCOUNT-ZDISCTYP'
          window_title    = 'Discount Type'(016)
          value_org       = 'S'
        TABLES
          value_tab       = i_disctyp
          return_tab      = i_ddshretval
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc EQ 0.
        READ TABLE i_ddshretval INDEX 1.
        IF sy-subrc EQ 0.
          MOVE i_ddshretval-fieldval TO zval_discount-zdisctyp.
        ENDIF.
      ELSE.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDMODULE.                 " f4_help_discount_type  INPUT
    Edited by: avinash kodarapu on Jan 5, 2009 12:34 PM

  • How to create personal templates in SRM 4.0

    Dear all
    We are upgrading from EBP 3.0 to SRM 4.0 and we don't see in SRM 4.0 how to create personal templates.
    The transaction BBPSC05 Create template create central/public templates and not personal ones (also if given to a basic user).
    1) In the Shopping Cart we can go to Old Purchase Order and Tempaltes and there we can select on status Personal Template but were can we create them?
    2) Additional question, how can we limit the availability of a public/central template to a certain users from some company or plant or ...
    Thanks

    Hi RD,
    1) for detailed explanations read my answer in this thread:
    SRM 4.0 Shopping cart templates
    2) such limitation does not exist in SRM, even if often asked by customers: the possibility to maintain templates centraly at a level between the public (every user can see them) and the private template (only the user can see them). So you would have to change the standard search logic on templates, and implement an additional serach criteria.
    Rgds
    Christophe
    PS: please reward points for helpful answers

  • How to create a help button for downloading a help file in OA Framework

    Hi all
    I want to create a help button for downloading a help document.Plz suggest me how to do it.
    Thanks
    Bhupendra

    Create a button of type "button",set the destination url property to the place u have kept the file.But ur file should be anywhere in Common_top.If this file is stored as blob u can use messagedownload bean.
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to create a help file for a VI

    I want to create a help file describing my VI. How do i do that by clicking a control. How do I store the help file.

    Hi Mudda;
    Assuming you are using Windows, with LabVIEW, you can create the necessary files to create a help file, but you can't create the help file. In order to create your help file, you need a WinHelp compiler.
    Also, what LabVIEW allows you to do is to create a file that correspond to the documentation of you VI, so you need to fully document you VIs first.
    To document you VI, go to File -> VI Properties and select "Documentation" from the menu. You can access the VI Properties also by Right-clicking the VI icon in the top-right corner of the Window. To document the controls and indicators in your VI, Right-click the control or indicator and select "Description and Tip...".
    To create the documentation files, go to File -> Print. At some point
    , you will have the option to select a Destination. Select "RTF File" to generate the files a WinHelp compiler understand.
    As you will see too, you can also create html files for your VIs. It can be a good alternative for WinHelp files.
    There are some nice Help editors outhere. I use HelpScribble. You can see a very simple help file I created with HelpScribble in my small projects VI Background Check and VIs for DeployMaster.
    Regards;
    Enrique Vargas
    www.visecurity.com
    www.vartortech.com

  • How to create  search help for field in interactive adobe form

    HI
    I want to create search help for PERNR field in adobe form.
    how i can do it.
    Can any one giud me.
    Regards,
    Laxman Sankhla

    Hi Laxman,
    Please search SDN, there are lots of queries posted and solved earlier on this.
    especially there are step by step blogs.
    Cheers,
    Sai

  • How to create Vendor list in SRM

    Hi GURU's,
    I am new to SRM. I have worked on other modules but no idea qbout SRM.
    I have been a requirement to create vendor list in SRM - need to find BAPI for it.
    Can any one please help me.

    SAP Help can be a good friend:
    http://help.sap.com/saphelp_srm50/helpdata/en/d5/849b3cc34ca10ee10000000a11405a/content.htm
    Cheers,
    Claudia

  • Math code, how to create search help

    how will you call match code in your program

    Hi shaik shadulla  ,
         Search Help Creation:
            Using the T-Code SE11 you can create search help, first you should create one search help name in that screen then it will ask two options in that option you should select first one(Elementary search help), then third window will open, in the third window you should give table name and field names for that table and Lpos, Spos values then activate it. After finish this process you should move to SE11 screen then give table name afterwards you click the regarding fields for your search help.
    IF USEFULL GIVE REWARD POINTS

  • How to create contract in SAP-SRM via a bespoke?

    Hi All,
    I got one requirement to create contract in SAP-SRM via a bespoke interface from the sourcing workbench.
    How to create contract in SRM via a bespoke?
    Even I don't know what is a bespoke. I belong to SAP bw platform
    kindly give me the solution.
    Thanx in advance,
    Ravi.

    Hi
    <b>Bespoke</b> <u>means</u> <b><u>Customer development</u></b>.
    So you can create Shopping carts, either automatically via logging to SRM portal or programmatically using Bespoke developments / programs.
    <b>BAPI Function module -  'BBP_PD_SC_CREATE_EXTERNAL' is used to create shopping cart from portal with other function modules.</b>
    <u>Also you can use RFC BBP_PD_SC_CREATE function module for Creating Shopping Cart.</u>
    <b>Create Shopping cart (or PO) in SRM/EBP from a flat file</b>  
    /message/3529548#3529548 [original link is broken]
    Create Shopping cart (or PO) in SRM/EBP from a flat file
    Function Module's for Shopping Cart.
    Do let me know.
    Regards
    - Atul

  • How to create a help page in my application like the one in HTMLDB ?

    Hi,
    What's the best way to create a help file for my application and link it like the help link at the top right of HTMLDB ?
    Thank you.

    That's what I did, but I have a lot of screen captures. Where would be the best place to save those gif, server or in the database by loading them via the images tab in HTMLDB ?
    Thank you.

Maybe you are looking for