How to create server mgr profile in n95i

Why team not helping me?
Problem is that my set USB
port out of Order. I to update
my nokia n95 v 35.0.002
10/11/2009
RM 159
Nokia N95 (170.1)
not 8gb.
sir I need device Mgr. Profile
for nokia N95i DETAIL
V.35.0.002 10.11.2009
RM-159
Nokia N95 (17.01)
Coz It's USB PORT NOT work
properly so that I need a
server profile like Server name( )
Server id ( )
Server ( )
Session internet
Host address ( )
Port ( ) User name ( )
Password ( )
Please help
Posting 21/12/2012

Hi,
what do you mean by the USB ports are not working properly? how can you say that it is not working properly? Are you having problems connecting your phone to your PC using USB cable? how did you try to update your phone? is it via Nokia Suite or over the air? Please elaborate your concern so that we can further assist you.
Thanks,

Similar Messages

How to create a content profile and Why this need

how to create a content profile and Why this need

Hi,
You will need profiles to control the following behavior:
- Which metadata to be shown in the checkin form and search form
- Define default values to certain metadata
- Make metadata editable, hidden, info only etc
- Allow the user to see only relevant metadata, for example you could have 50 metadata defined, but all you need for the user to input is 10 for say HR documents, you can show only these 10 metadata for the user to contribute
HTH
Regards,
- Anand

HOW TO CREATE PRODUCTION SCHEDULING PROFILE

PLEASE
TELL ME HOW TO CREATE PRODUCTION SCHEDULING PROFILE
EXPLAIN IN STEPS
THANKS

Hi,
Check the below link and the screen shot:
http://wiki.sdn.sap.com/wiki/display/ERPLO/Production+Order+Type+Selection
Hope it will help you.
Regards,
Alok Tiwari

I want to be the only one who can access my profile, so how to create passwords for profiles (NOT for websites) ?

I want to be the only one who can access my profile, so how to create passwords for profiles (NOT for websites) ?
thanks

Maybe use the portable Firefox version on a USB stick if you want to prevent access to your profile.<br />
Solutions that use an extension can easily be bypassed by starting in [[Safe mode]].<br />
Otherwise you need to locate the Firefox profile folder on an encrypted drive.
See http://portableapps.com/apps/internet/browsers/portable_firefox

HOW TO CREATE LOCAL USER PROFILE

SIR,
OS - WINDOWS SERVER 2008 R2
SYSTEM - IBM MACHINE X3400 SERIES
1. HOW TO CREATE A USER IN WINDOWS SERVER 2008 R2 WITHOUT ACTIVE DIRECTORY
2. AFTER CREATE USER IN WINDOWS SERVER 2008 R2 BUT USER PROFILE NOT CREATE .

Hi,
>>1. HOW TO CREATE A USER IN WINDOWS SERVER 2008 R2 WITHOUT ACTIVE DIRECTORY
>>2. AFTER CREATE USER IN WINDOWS SERVER 2008 R2 BUT USER PROFILE NOT CREATE
Creating an user account on the computer doesn't create a profile for that user. The profile is created the first time the user interactively logs on at the computer. After the user logs onto the computer for the first time, the user's local profile
will be created in a folder with the name of the user under the systemroot/Users folder.
Best regards,
Frank Shen

How to create custom color profile in OSX?

I started thinking about this after downloading the program "f.lux", which changes the color temperature of your screen depending on the time of day. It seems the program accomplishes this by adjusting your display calibration. Some controls for this already exist (you can tinker with them in preferences>display>color) but they can't be calibrated beyond minor changes to gamma and color tempterature. In f.lux they have a "darkroom mode", which is this amazing red-on-black high-contrast effect perfectly suited for use in a darkroom. I feel like a high-contrast monochrome display could come in handy, but I want more control over the brightness and color than what this app offers. I don't see anything like that in the usual preferences, but I do see a host of various color profiles (apple rgb, adobe rgb, PAL, Pantone, and whatever else...). How do I create a completely custom profile, or edit one that exists? Where are these files stored on my computer? Are there workarounds, or any third-party apps for changing my display settings?
All help is greatly appreciated.

Hi,
To create document library, please look at the below links which may help you to resolve your problem.
Create document library programmatically in SharePoint
How to Create SharePoint List or Library Programmatically
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to create server named sets in Essbase 9.3.1

Hi there,
I'm writing software against Essbase 9.3.1 Analytic Services right now and am trying to find out whether or not Essbase supports server named sets (not the session/query-scoped named sets that are created from CREATE SET or WITH respectively). I am able to execute the MDSCHEMA_SETS request against my Essbase server with the following response:
<?xml version="1.0"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-ENV:Body><m:DiscoverResponse xmlns:m="urn:schemas-microsoft-com:xml-analysis"><m:return xsi:type="xsd:string" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><root xmlns="urn:schemas-microsoft-com:xml-analysis:rowset" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><xsd:schema xmlns="urn:schemas-microsoft-com:xml-analysis:rowset" targetNamespace="urn:schemas-microsoft-com:xml-analysis:rowset" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sql="urn:schemas-microsoft-com:xml-sql" elementFormDefault="qualified"><xsd:element name="root"><xsd:complexType><xsd:sequence minOccurs="0" maxOccurs="unbounded"><xsd:element name="row" type="row"/></xsd:sequence></xsd:complexType></xsd:element><xsd:complexType name="row"><xsd:sequence maxOccurs="unbounded" minOccurs="0"><xsd:element name="CATALOG_NAME" type="xsd:string" sql:field="CATALOG_NAME"/>
<xsd:element name="CUBE_NAME" type="xsd:string" sql:field="CUBE_NAME"/>
<xsd:element name="SET_NAME" type="xsd:string" sql:field="SET_NAME"/>
<xsd:element name="SCOPE" type="xsd:int" sql:field="SCOPE"/>
<xsd:element name="DESCRIPTION" type="xsd:string" sql:field="DESCRIPTION" minOccurs="0"/>
<xsd:element name="EXPRESSION" type="xsd:string" sql:field="EXPRESSION" minOccurs="0"/>
<xsd:element name="DIMENSIONS" type="xsd:string" sql:field="DIMENSIONS" minOccurs="0"/>
<xsd:element name="SET_CAPTION" type="xsd:string" sql:field="SET_CAPTION" minOccurs="0"/>
<xsd:element name="SET_DISPLAY_FOLDER" type="xsd:string" sql:field="SET_DISPLAY_FOLDER" minOccurs="0"/>
</xsd:sequence></xsd:complexType></xsd:schema>
</root></m:return></m:DiscoverResponse></SOAP-ENV:Body></SOAP-ENV:Envelope>
Anyone know how to create/access this? If so, what tool (essmsh.exe, Administration Services?) is needed to do this?
Thanks,
J

Yes you need to create one DSN connection and you have to use DSN name and login details at the time of building/loading of the outline.
Create DSN
Goto Administrative tools -> DataSources (ODBC) and add the DSN name and specify the Server name of SQL and login details and database.
goto data prep editor and click on File Menu and Click on Open SQL option Next window opens.
There you have to enter the details of the DSN connection and SQL query to build/load.
Thanks,
Prathap

How to create n/w profile

Hi Experts,
I want to know about how to create network profile and how to manage it.

Hi,
The network profile contains default values and parameters for controlling the processing of networks,
such as control keys for activities.
The data which you enter here in the network profile is copied into the header, activities, and activity
elements when you create a network. You can overwrite these values in each new network.
Examples
o To be able to call up the network structure graphic, you must have entered a graphic profile in the
network profile.
o To be able to create a project version for the network, you must have entered a version profile in the
network profile.
You enter the different values you need for the network profile in different Customizing areas. For
example, in Customizing for the Project System, you enter the control keys, but you make the settings for
graphics in the Basis IMG by choosing Frontend Services -> Bar Chart and Network/Hierarchy.
Notes
o These control or profile parameters determine the functionality of certain areas and cannot be
changed without effecting existing objects.
o If you want to work with entry help, you must enter a sequence key for activities.
You should maintain the following sections in the network profile:
o Network parameters
o Activity parameters
Standard settings
The standard R/3 System contains network profiles preset with the most important parameters.
Activities
1. Enter the organizational and control data for your networks.
2. Create the corresponding network profiles.
T Code is OPUU.
Regards,
Amit

10.5.6 windows cannot create server based profiles

Hi @ all,
at time i plan to migrate my 10.4.11 tiger to 10.5.6 leopard, this fileserver stores the user home and profiles for 40 Windows Users.
I installed a new server with leopard 10.5.6 and tested the server if the user who are loggin into my OD gets his porfile and home from this server.
Yes right, it won't work.
Following is the setup
Windows XP sp2 joined in the domain MYDOMAIN and gets his profile and home from filesrv1 (this setup works)
filesrv3 with AFP/NFS/SMB
smb standalone, identifiedy by NTLMv2 & Kerberos/NTLM/LAN-Manager, Latin 1(850), Use wins sever xxx.yyy.zzz.
sharing a folder /Volumes/System/Users as Users with SMB guest access allowed and owner rights read&write
sharing a folder /Volumes/System/Users/Profiles as Profiles wit SMB guest access allowed, strict locking, owner rights read&write
Now setting in the WGM the home directory and the windows Profile to filesrv3 following appears
By Logging in in Windows, windows says cannot load profile check you directory ... bla bla...
The logs on my server says the following
....snip....
==> /Library/Logs/WindowsServices/log.smbd <==
[2008/12/30 14:28:36, 1, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/service.c:close_cnum(1284)
brcheck1 (172.17.35.52) closed connection to service profiles
[2008/12/30 14:28:36, 1, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/service.c:close_cnum(1284)
brcheck1 (172.17.35.52) closed connection to service vroni
[2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:setupnew_vcsession(1260)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:setupnew_vcsession(1260)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/auth/auth.c:checkntlmpassword(319)
checkntlmpassword: Authentication for user [] -> [] FAILED with error NTSTATUS_NO_SUCHUSER
[2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:setupnew_vcsession(1260)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:setupnew_vcsession(1260)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/auth/auth.c:checkntlmpassword(309)
checkntlmpassword: authentication for user [vroni] -> [vroni] -> [vroni] succeeded
[2008/12/30 14:28:36, 1, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/service.c:makeconnectionsnum(1087)
brcheck1 (172.17.35.52) connect to service profiles initially as user vroni (uid=1033, gid=20) (pid 5310)
[2008/12/30 14:28:36, 1, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/service.c:close_cnum(1284)
brcheck1 (172.17.35.52) closed connection to service profiles
....snip....
In the profile folder the directory for this user is created but nothing more.
The Home is mapped to V: after login but no profile is created or loaded.
It seems the the samba cannot speack correctly with the LDAP.
anyone knows somthing about this?

This doesnt work for me either, I ended up setting the profile path to C:\Documents and Settings\shortname which is OK for me but I only have a few users and a handful of PC's.
This results in proper authentication using OD, and a roaming profile that exists on the local XP computer. I map H: to my home directory and store everything there and I am done.
When Roaming Profiles work properly Id like to implement them. But even then, because Id like to implement 'group policies' I need more and it seems hard to avoid a Windows server for profiles and policy management. I would prefer not to have any Windows admin machines.
Angus

How to create a default profile for all users in Firefox 9.

I run a computer lab, and am looking for a way to create a default profile in Firefox 9 that new users can use. I want them to be able to launch Firefox for the first time, and see my homepage. I want to disable any check for default browsers, firstrun pages, or any other prompts.
The old .adm files for group policy don't seen to be working any longer.

See http://www.frontmotion.com/Firefox/howtodeploy.htm
You can create a defaults\profile folder in the Firefox program folder and place files in it to be used to create and initialize a new profile.

How to Create Server BC4J Package in OAF 10.1.3.3.0.3

Hi all,
Can any one help me out in getting clear about creating Server BC4J package in OAF 10.1.3.3.0.3,
as in 9i we right click onproject.jpr file & click on new business componant package.but in 10.1.3.3.0.3 version there no option kindly help me out

Hi,
Seems you are new to forums. Pls close the thread if your question is answered by mentioning which reply is helpful or correct.
Refer http://forums.oracle.com/forums/ann.jspa?annID=914
-Anand

How to create a Mail profile using C#

Hi,
Need to create a mail profile using C# code. Kind of a replacement of CreateProfile() in MAPI.
Trying to create mail profile for exchange using Exchange Web service, is that the rite way to do that.
Should i use any other reference to create mail profile.
Thanks,
Dinesh

Hello,
Crystal Reports are supported on
http://scn.sap.com/community/crystal-reports.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to create an Action Profile for a Survey

Hi
Can you please help me with the steps to create an Action Profile for a Survey. Eg. If the user creates a like Lead / Service, Action profile assigned to the Transaction type has to trigger the Survey.
Thx

Hi Kalees,
Survey is nothing but a Questioner that is Represent the Feedback for a Particular Transaction.
Controlling Survey by a Action Profile is possible to some Extent indirectly.
One way of Controlling the Survey Execution based on System Status
Go To:Customer Relationship Management>Transactions>Settings for Activities>Questionnaires>Define Determination Criteria for Questionnaires Define a Criteria Set for a Particular Status,Here what ever Status Assigned are Responsible for the Survey Form to Appear in that Transaction Type at that Particular Status.
In Define Determination for Questionnaires: Business Activity:assign the Criteria Set that you have Created to your Survey Form
Go To:Customer Relationship Management>Transactions>Basic Settings>Status Management>Change Status Profile for User Status The Status Profile that you are using Ensure that the System Statuses are Assigned to a User Status on which you want the Survey Determination to Happen.
Direct Action Trigger for Survy Form is not Possible
This is one way to Control the Transaction Type Status and in mean you shall indirectly get Control over the Survey Form
Hope it Answers your Queries..
Thanks and Regards,
RK.

How to create a divert "profile" in E65?

Hi,
Does anyone know how to program a profile into an E65 so that when you want to divert your phone you don't have to go theough the whole process each time?
thanks,
Aoife

I don't think you can create a profile that can do this.
You need to purchase an extra progam.
I've seen a program called "best advanced call manager" that can do what you want it to do but I don't thinks it's compatible with newer phones.
Have a google and see what you can find.

How to create server 2012 R2 image to be used as template for cloud?

Hi,
I need help to create windows server 2012R2 image that can be used as template for AWS or Azure or any other cloud provider.
VM created from that template must
1) be syspreped
2) answer all setup questions
3) must change computer name to unique name
4) must automatically join VM to on-premise domain.
I need Microsoft supported way to do that. Does creating unattended answer file will help? But, I don't want to provide domain joining credentials in plain text. Where should I keep that answer file so that it can be used during setup process.
Is there any other ways to achieve that.
Thank you.

Hi ninenince,
You can refer the following KB to hide the sensitive data in answer file, this is more about the MDT issue there have a specific forum to support the MDT question, more further
about the MDT question please post to the MDT support forum.
MDT support
forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=mdt
The related KB:
Hide Sensitive Data in an Answer File
https://technet.microsoft.com/en-us/library/cc722019%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
How To encrypt a password in unattendend.xml
https://social.technet.microsoft.com/Forums/windows/en-US/5e6a97b5-186c-40dd-a165-2cc3e7eb2682/how-to-encrypt-a-password-in-unattendendxml
Additional, we can use a low permission account for the domain join action.
The related third party article:
Minimum Permissions Required for Account to Join Workstations to the Domain During Deployment
https://jonconwayuk.wordpress.com/2011/10/20/minimum-permissions-required-for-account-to-join-workstations-to-the-domain-during-deployment/
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these
sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use
of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to create server mgr profile in n95i

Similar Messages

Maybe you are looking for