How to create shape on same layer

since photosho adds another layer every time i create shape is there a way to create shape on same layer?

What version of PS? Depending upon the version, there should be a dropdown menu or some sort of selection in the main menu bar to either add to a shape, subtract, exclude, or intersect. Look around in the main menu bar for your version of PS.

Similar Messages

How do I use "Trim Paths" after "Create Shapes from Vector Layer" on a strokes only layer?

Hello,
Adobe After Effects CC
2014.0.2
Version 13.0.2.3
I have imported an illustrator file that was created in Illustrator CC 18.0.0. The file contains the outline of a logo. It is the logo with the fill set to none and the stroke set to 1px.
I drag the logo_strokes.ai file onto the composition, right click, and click Create Shapes from Vector Layer.
A new layer is created and in the Contents "drop down", a Fill 1 layer is created.
When I select the Contents "drop down" and click Add / Trim Paths, a Trim Paths 1 layer is created.
When I animate Trim Paths 1, it appears to animate the Fill layer, not the stroke.
How do I get it to animate just the stroke, and not show a fill at all?
Thank you.

Thanks,
I am reading and watching tutorials. Still stuck on that one point.
Here are the images of the After Effects layers. The illustrator layer is the top layer.

How to create shape layer in Adobe After Effects Cs2 ?

How to create shape layer in Adobe After Effects Cs2 ?

THere is no such thing. Shape layers were introduced in CS3.
MYlenium

How to create an incentive same as LPC and PPI in ISU. Any help from the experts as it is an urgent requirement of the client.

How to create an incentive same as LPC and PPI in ISU. Any help from the experts as it is an urgent requirement of the client.

Hi,
It depends on fact that when you want to create the incentive.
If you want to create at the time of invoicing, then you have to enhance event R402.
If you want to create at the time of payment, the you have to enhance event 0032.
Hope it helps
Thanks,
Amlan

How to copy a shape into same layer as original

In Elements 11 each time I copy a shape the pasted copy appears in a new layer. I would like to have the pasted copy stay in the same layer as the original shape. How do?

When you paste, it's always going to come in on a new layer, just merge them back together again afterwards, or use the shape selection tool to alt/option drag a shape with the add to shape button turned on. The shape selection tool is the gray arrow in the list of shape tools in the tool options.

How can create other user same as oracle user

Hi,
I want create one user on linux same as oracle user how can create it?
I have create monitoring purpose one user created same as oracle user name is user01 but how can create it?

creating an user in linux
useradd user01 -g dba
i am considering the oracle administrator group is dba ( which is asked during the installation of oracle )

How to create directories with same name in different schemas

I have two schemas on the same database.
I am trying to create directories with same name, but different paths in both the schemas.
When i created the directories in second schema, the directory paths of the first schema are automatically changed to the second path.
Is there any solution to create directories with same name, but different path in two different schemas on the same database.
Thanks,
Sridhar.

Hi,
>>When i created the directories in second schema, the directory paths of the first schema are automatically changed to the second path.
If you have removed the REPLACE clause of your create statement, then you would see that is not possible.
SYSTEM> connect scott/tiger
Connected.
SCOTT> create directory mydir as '/tmp';
Directory created.
SCOTT> connect legatti/pwd
Connected.
LEGATTI> create directory mydir as '/tmp';
create directory mydir as '/tmp'
ERROR at line 1:
ORA-00955: name is already used by an existing object
LEGATTI> select owner,object_name,object_type,created
2 from dba_objects where object_name='MYDIR';
OWNER OBJECT_NAME OBJECT_TYPE CREATED
SYS MYDIR DIRECTORY 19/12/2007Cheers
Legatti

How to create web page same as Struts tiles in OPA?

Hi,
How to create web page containing consistent Header,Fotter,left right pannel which embed OPA screen?

Web Determinations uses Velocity templates to configure the appearance of a paritcular page. You can configure these tempaltes to get the look and feel that you like.
For more information search for "Oracle Web Determinations Template Reference Guide" in the Oracle Policy Automation Developer's Guide (http://docs.oracle.com/html/E38272_01/toc.htm)

How to create shape that follows camera movement

Hi
I am trying to create a little axis representation on the bottom of the canvas that would be fixed in position relative to the camera and the axis. (i.e. if camera moves or rotate, the axis representation will stay at the same place and rotate accordingly). What is the best way to do this ? Do I extend the Camera/Mouse class and tell it to update the transform group of the axis shapes whenever it moves ? Does anyone have a example of how they did it ?
Thanks, Dave

Julie,
To get something that resembles a straight pill (or a capsule) as the one you describe, you may:
1) Create the outer rounded shape and split it into two: one on top with the stroke, one below with the solid fill corresponding to the colour adjacent to the stroke;
2) Select the filled path and Object>Path>Offset Path, using a negative value that is half the width less a suitable small amount (1pt or something);
3) Change the fill of the small inner path to a paler grey or white;
4) Select both the filled paths and Object>Blend>Make (with Smooth or a suitable number of steps in the Object>Blend Options).
To easily get something that is more like a round pill, you may apply horizontal gradients to the paths in the blend, along with a suitable number of steps.
With a new version, you may also use the new 3D features.

How to create a via from layer 1 to 3 on a 8 layer PCB?

I'm working on a design for a 8 layer PCB with Multisim/Ultiboard v10. In Multisim under sheet properties i selected the PCB to contain 8 layers, which makes Ultiboard to create this board with 4 layer pairs and 0 top/bottom build-ups. In the PCB properties of Ultiboard i enabled micro vias and buried/blind vias but i noticed that i'm not able to allow vias between some combinations of layers.
For example i can enable vias from top to the second layer (1st inner) and from top to the fourth layer (3rd inner), but not from top to the third layer (2nd inner).
When placing a via, i can select top for the start and the 3rd layer
for the end, but it will be created as via between top and the 4th
layer, which will -of course- shorten several traces on the 4th layer.
So my questions is: Why am i not allowed to create a via, that goes from the top layer to the third layer and how to enable all possible combinations of start and ending layers for the via?
Thanks for your help
fhn
PS: sorry for my bad english :/
Message Edited by fhn on 08-22-2008 04:39 AM

I am not 100% sure about this, but what I see happening here is that you can only select certain combinations of pairs. Once that selection is made it will gey out other selections as not valid. You might want to carefully look at the options in the via selection and make sure of which layers you want vias to be on. I don't know about enabling all layers in this selection. I would assume this would not be legal from a design rules standpoint, but since most of my boards are either single or double sided I do not have the necessary experience with multi-layers to give a proper answer to that.
This is the only thing I can advise as when I went through the process I was able tio select the vias for the layers you outlined in your post.
I hope this helps somewhat as this is all can tell you.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

How to create sublayer of a layer programmatic-ally ?

hi,
I want to know whether we can create a sublayer of a layer programmatically or not .If it is possible then how?
I unable to find the any function regarding this in sdk. plz suggest me.
thanks.

Have you tried something like:
AILayerHandle newLayer = 0;
sLayer->InsertLayer(parentLayerHandle, kPlaceInsideOnTop, &newLayer);
They don't mention kPlaceInsideOnTop in the documentatino for InsertLayer(), but I imagine that's how you would do it. If not, I have no idea.

Creating shapes from Vector layers (.ai files)

I am trying to make extrusions to an image. I am new to Illustrator and have read that .ai files are the only ones that you can extrude in AE. However when I bring in an .ai file and select create shape from vector layer, a grey square covers the shape. I am assuming that it is a transparancy issue and it is just filling in the size of the .ai project. I could be wrong though. How can I fix this?

You need a plain shape in AI. If you're using gradients, masks, clipping paths or other stuff it won't work. Please give us more info and possibly a screenshot of your ai file.
Try this. Open up Illustrator. Take the pen tool and create a simple shape with a closed path. Import that single layer single path file into AE and see if it works. If it does, then show us a screenshot of your AI file and show all layers and expand out any groups. We'll try and help.

How to create LOV not based on a View Object attribute?

Hi,
I am creating a handed-made search form and I want to create an af:inputListOfValues.
I have :
- a read-only-view-object to get the LOV values from BD.
- af:inputListOfValues tag (droped from Component Palette).
How can I create the listOfValuesModel in Bindings layer? (the inputListOfValues is not based on a View Object attribute).

Sorry, I think I am not very clear in my posts.
My requirement is to create a LOV but I have no ViewObject. I just want an input (not based on a view object attribute), alone, but with a LOV (where lov's datas are get from a view object).
In a "normal" LOV I would have something like this :
in jsff :
<af:inputListOfValues id="departmentIdId"
                            popupTitle="Search and Select: #{bindings.DepartmentId.hints.label}"
                            value="#{bindings.DepartmentId.inputValue}"
                            label="#{bindings.DepartmentId.hints.label}"
                            model="#{bindings.DepartmentId.listOfValuesModel}"
                            required="#{bindings.DepartmentId.hints.mandatory}"
                            columns="#{bindings.DepartmentId.hints.displayWidth}"
                            shortDesc="#{bindings.DepartmentId.hints.tooltip}">
        <f:validator binding="#{bindings.DepartmentId.validator}"/>
        <af:convertNumber groupingUsed="false"
                          pattern="#{bindings.DepartmentId.format}"/>
      </af:inputListOfValues>in pageDef :
<listOfValues StaticList="false" IterBinding="EmployeesView1Iterator"
                  Uses="LOV_DepartmentId" id="DepartmentId"/>in model layer : a view object (EmployeeView) with view accessor and LOV based attribute, and a read only view object (DepartmentRVO) to get datas for the LOV.
But in my case I have no ViewObject, so I don't know how to create the listOfValuesModel in fragment pageDef.
I have :
<af:inputListOfValues label="Label 1"
                                popupTitle="Search and Result Dialog"
                                id="ilov1" model="here I want to point to a listOfValuesModel but I don't know how to create it"/>in pageDef : the listOfValuesModel but I don't know how to create it.
in model layer : just a read only view object (like DepartmentRVO), to get the datas for the LOV.
Edited by: h0s on 29 févr. 2012 00:31

How to create Count field

Hi All,
I need to create Count(*) one of the fileld from Fact Table. How to create it in presentation layer?

Hi Welcom99,
You can apply the 'Count' Aggregation for any column.
right click on column from the table in BMM Layer which you want to apply 'count' and select properties. In the third tab called 'Aggregation' is available. from there you can select 'Count' from default aggregation rule.
There is another way also.
In the presentation services we can write the formula count(column name) for the column which you want make count.
Regards,
Bose

How do I copy parts of layers from one AI doc into a new AI doc and keep/create same layer names?

How do I copy PARTS of layers containing many objects from one CS5 AI (v.15.0.2) doc into a new CS5 AI doc and keep/create the same layer names?
To start with, I have one fairly complex AI document with 100 layers, with several hundred items in each layer. For example, one layer named "Stars" contains 400 separate stars (not grouped), another layer named "Crosses" contains 300 separate crosses, and a 3rd layer named "Text" contains 200 separate words (not outlined).
If I select, by marqueeing a section of the image/artboard, some (but not all) of the individual items contained in the several layers, then paste that selection into a new CS5 AI doc, I cannot get them to create new layers of the same name. Instead they go into one general layer (e.g. "Layer 101") as a jumble of discrete, but unorganized objects (no layers or sublayers). In other words, I have lost the 3 main layers from which I selected a bunch of objects.
Checking "Paste Remembers Layers" has no effect on this result. In fact "Paste Remembers Layers" does not remember layers at all. Only if I select ALL the items in the several layers will it paste those layers by those names into the new doc (or create new layers of the same names).
Of course it is a COLOSSAL waste of time copying the ENTIRE document, then pasting the WHOLE thing into the new doc (with layers retained), then deleting the parts I DON'T need, so please don't suggest that as the solution.

No Monica, nothing in Plug-ins other than the standard installed items (extensions, filters, formats, etc.). No 3rd-part clipboard extension on my computer that I'm aware of, either. All frustratingly basic. And my other CS5 Adobe programs appear to work well, at least to the extent that I am familiar with them.
So, from what I can tell of the various comments (thanks to all of you), am I correct in thinking that it seems I can't, in fact, do what all of you can do (that is, copy some objects from some layers in one doc and paste into another doc preserving those same layers by name and organization, and each containing the correct objects from each original layer)?
If so, that solves half my issue - "is it supposed to be possible to do it"; leaving just the other half - "why can't I do it too".
I'll get those screenshots made and posted later just in case I haven't adequately described the issue, or y'all haven't understood it.

How to create shape on same layer

Similar Messages

Maybe you are looking for