How to create small icon on my screen

i have bb curve 9300 i just bought last week..but i have mistake i have deleted small icon,, you tube..look like logo you tube..i don;t know how to put the back on..i trying to download from you tube but dissapointed logo too small not nice..not like the original>>anyone please can tell me ..or you can email me thk you

Favicons (favorites icons)
http://alt-web.com/favicons.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Similar Messages

Fwd: how to design small icons

Hi,
That's right, but a difference remains in comparison with small icons from original LabVIEW components: when you manipulate such a custom small icon on your block diagram, its "transparent" area remains "selection sensitive".
Does anybody have a hint ?
oz
-------- Original Message --------
Objet: Re: how do i small icon
Date: Mon, 25 Mar 2002 06:50:30 -0800 (PST)
De: Dennis Knutson
Forums: comp.lang.labview
The terminals have nothing to do with the size of the icon - they are defined by the connector pattern you use. If you want an icon about the same size as a numeric, select the pattern with 2 connectors on the left and 2 on the right. Assuming you have a single input and a single output, connect them to the uppermo
st left and uppermost right.
Now, when you go into into the icon editor, select "show terminals".
Draw a box the same size as the connector pattern you're wired to.
Make sure you have the same icon for the b&w, 16, and 256 color.

I don't think there is anyway around it. You have to remember the native LabVIEW components are not VIs and weren't created with LabVIEW. Maybe NI could work on a way to do it for LV7?

TS3274 How do I move icons from one screen to another?

How do I move icons from one screen to another.

Hold down on one icon until they start shaking, then drag the icon to the edge of the screen, and the screen should slide to the next one, you can then drop it on that screen or drag it again to the edge to move to the next screen.
Page 21 of the user guide explains this under Arranging Apps:
http://manuals.info.apple.com/en/ipad_user_guide.pdf

How to create a parameter id on screen element

How to create a parameter id on screen element
reply urgent

Hi Madan,
Check this info.
Parametere Id is the one which holds the memory for the particular field. when we need to pass the the field from one screen to another use the parameter Id.
The SAP Memory is a user-specific memory area of the application server, which is accessed by all main sessions of a user session at once. ABAP programs have access to SPA/GPA parameters stored in the SAP Memory (also called SET/GET parameters).
Eg. Of how to use Set parameter
you can give value of variable (dobj) to parameter ID 'pid'. This will store value in SAP memory
SET PARAMETER ID pid FIELD dobj.
When you want to use that value stored in SAP memory
you can use GET parameter.
GET PARAMETER ID pid FIELD dobj.
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
Check this link.
http://help.sap.com/saphelp_47x200/helpdata/en/f5/6a853c61c5140ee10000000a11405a/frameset.htm
Hope this resolves your query.
Reward all the helpful answers.
Regards

How to create shortcut icons for settings

how to create shortcut icons for settings

I also have this issue. Apple has indicated they want to have a larger presence in businesses. VPN is a huge part of any business network. Frustrations are hightened by the VPN disconnecting whenever the device Auto-locks. We have a definite need to make VPN's on iPads less tedious...

How to create the ICONS and SYMBOLS

how to create the ICONS and SYMBOLS
Title was edited by:
        Alvaro Tejada Galindo

HI,
Check this sample code....Not mine...
REPORT SHOW_ICONS.
TABLES: ICON.
INCLUDE <ICON>.
FIELD-SYMBOLS: <F>.
SELECT * FROM ICON.
   ASSIGN (ICON-NAME) TO <F>.
   WRITE:   /(5) <F>, 20 '@',21 ICON-ID+1(2),23 '@',ICON-OLENG,
            ICON-BUTTON,ICON-STATUS,ICON-MESSAGE,ICON-FUNCTION,
            ICON-NAME.
ENDSELECT.
Also Try this,
INCLUDE <symbol>.
INCLUDE <icon>.
Write:/ 'Phone Symbol:', SYM_PHONE AS SYMBOL.
SKIP.
WRITE: / 'Alarm Icon: ', icon_alarm AS ICON.
For more information check out the following link it will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9e4a35c111d1829f0000e829fbfe/content.htm
Regards,
Padmam.

How can i move icons from one screen to the other?

How do i move icons from one page to another?

Tap and hold any icon for a couple of seconds. They'll all start to wobble. Tap and drag the one you want to move to the side of the screen and the next screen will appear; drop the icon on whatever screen you want it on.
You can also do it quicker in iTunes - connect the phone and click the Apps tab in the main window. You'll see a picture of your phone with the apps laid out. Just click and drag

Module-pool: how to create different blocks at same screen

hi experts,
can i create different blocks at same selection-screen in module-pool? if yes,how?and can i use 'loop at screen' in dat case?
thanks.

you can do that...
you have create subscreen areas in the screen painter and call the selection screen on those areas..
Just see the stpes..and follow the sample code..
REPORT ztest_mod.
DATA: kunnr TYPE kunnr.
"if you want to create blocks same like selection screen the
"you have to create them as subscreen,
"place them in subscreen area.
* Custom Selection Screen a
SELECTION-SCREEN BEGIN OF SCREEN 0200 AS SUBSCREEN.
SELECT-OPTIONS: s_kunnr FOR kunnr.
SELECTION-SCREEN END OF SCREEN 0200.
START-OF-SELECTION.
"in this screen i have a button with function code 'SEARCH'
" and a subscreen area with name sub
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS'.
ENDMODULE.                    "status_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
"for reading the selection screen fields
DATA:
      i_dyn_fields LIKE TABLE
                     OF dynpread
                   WITH HEADER LINE.
MOVE:
    'S_KUNNR-LOW' TO i_dyn_fields-fieldname.
APPEND i_dyn_fields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = '0200'
    TABLES
      dynpfields           = i_dyn_fields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc eq 0.
   read table i_dyn_fields index 1.
    s_kunnr-low = i_dynp_fields-VALUE
    s_kunnr-sign = 'I'.
    s_kunnr-option = 'EQ'.
    append s_kunnr.
ENDIF.
DATA: it_kunnr TYPE TABLE OF kna1.
CASE sy-ucomm.
    WHEN 'SEARCH'.
      SELECT * FROM kna1
      INTO TABLE it_kunnr
      WHERE kunnr IN s_kunnr.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                    "user_command_0100 INPUT
Flow Logic
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN sub INCLUDING sy-repid '0200'.
PROCESS AFTER INPUT.
MODULE user_command_0100.
Regards
Vijay Babu Dudla

How do I delete icons in Home Screen?

Hey guys,
My sister used my curve and when I got it back, I saw that there was a Myspace icon for the Myspace app on my home screen. The app isn't downloaded yet, but I can't seem to delete the icon from my screen (I don't want it there). For now I just have it hidden.

Hi and welcome to the forums!
Go to options, advanced options, applications.
Let the table build and then check to see if you have an application for Myspace.
If you do highlight the entry and menu key, delete.
Do a battery pull and this will delete the icon.
Some apps are pre set by your carrier. On my Curve I have facebook, part of the
Verizon setup. I can delete it, but whenever I get service books it is pushed to the
phone by the carrier and the icon returns. I have created a folder for these apps and
all others I do not use. By keeping the useless apps in a folder I reduce clutter and
do not accidentally activate them.
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How to create smaller .exe file use JBuilder7

I am currently using JB7(EE), which can create native executable file for me. But I found it so foolish that add so many unneed classes to .exe(As I can use WinRar open it, but cannot change it).
Does anyone know how to reduce the .exe?
ps: As I use castor, so I had to include castor class in it, but I really don't want to add all of these to it.

In the Wizar you employ to make the native executable,
in the second step the Wizard ask you what to do with
the libraries you have employed in the proyect,
include all them include only the classes and
resources nedded, or not include. This way you'll be
able to control what is in you .exe file.
AbrahamYes, I had tried it, and tried every possible combination/permutation of the four choice.
But still bigger than it can be.
For example: I used castor.xml library, but JBuilder include all castor include xml parser, html parser, xhtml parser, etc.
As castor.xml --> castor.xxx(I cannot remember its name) --> castor.html-->...
So JB7 maybe confused by the complex deps.
So JB7 include ALL in my exe fiel.
It may be impossible to create smaller .exe file with normal way.
So anyone know any other way to create .exe file with the .jar file?
As I can change the content of .jar, but cannot to .exe.
thx for continous reply

How do you group icons on your screen

How do you group icons, like making a games folder for your screen?

From the iPad User Manual:

How do create new icons (shortcuts) in iPhone 3g?

Anyone creating new icons for the home screen? tips?

Good reading before posting:
http://support.apple.com/manuals/#iphone

How to: Create a custom search result screen?

Hello,
Is it possible to create a custom search result screen?
I need it because the users must be able to directly e-mail
the items or a selection of the items returned by the search.
For this modification of the standard result page isn't sufficient.
Thanks,
Steven.

Steven, please see:
http://technet.oracle.com/products/iportal/files/pdk/plsql/doc/sdk23pkg.htm

How to create a iPod/Iphone Home Screen icon

My icon file is a 512*512 pixels PNG file. It works fine on my devices
during development.
And when I try to load to iTune, it seems like iTune can not display this
since it requires a 57*57 PNG file.
Could anyone show me how to convert this 512*512 PNG file to 57*57 PNG file?
I am a new Mac user and it will be appreciated if you can show me how to do it?
Thanks.

Are you talking about when you upload your app to iTunes Connect?
Your app needs to contain a 57x57 pixel icon in PNG format. It should be referenced in the Info.plist file - there's a property called "Icon file" in it. Drop the icon into your project in Xcode, and enter the name of the file, e.g. myappicon.png into the "Icon file" entry in Info.plist.
When you build your app for distribution, it will be included and iTunes Connect will check your zipped package for the correct icon.
If, however, you want to know how to make it a 57x57 pixel icon, simply use Photoshop or GraphicConverter or any of the other myriad paint apps to resize it.
Don't add the shine and rounded corners effect that you see on icons on the device, the iPhone/iPod touch will do that for you.

How to create an icon in start menu at bottom of iMac screen which links to address book in Mavericks OSX 10.9

How do I do this?

Choose Applications from the Finder's Go menu and drag the desired application there.
(92952)

How to create small icon on my screen

Similar Messages

Maybe you are looking for