How to create smart device application and dialog control using Visual C++ (Visual Studio 2005)
Hai all,
Good day. I am new to Visual C++. I tried and done some simple programs and dialog based programs in MFC application using Visual C++. But when i am trying to do
VC++ smart device win32 smart device project application project, not getting how to add event handler function for button. I tried serial communication in smart device application. i have inserted dialog and in that
no event handler. Can you please guide me to make a project for embedded board in VC++ smart device application.
Thanks & Regards Sasi ................. Go Green
Hi kvg,
Thanks for posting in MSDN forum.
From your post, it seem that this issue is better ask to the
Visual Studio Smart Device Development - Native C++ Project forum. I will move your thread to that forum for a better support. Thanks for your understanding.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
How to create table.maint.generator and enduser should use using ztcode
Hi,
can any one guide me how to create table maintanence generator and after creating,enduser must use using ztcode.
any help can be appreciated.
Thanks & Regards,
Sandeep.Hi,
Table Maintenance generator is required to do Manual entries in the Table. If the requirement is to update the table only programmatically and not manually then table maint. generator is not required.
Manual entries in table can be maintained ( New record can be inserted / existing can be modified ) using transaction SM 30, if the table maintenance for the table is generated.
How to activate Table maint.
Goto SE11 and open the table.
Click UTILITIES -> Table Maint. Generator, Enter the details and click on Save. Then activate the table.
chk a sample 1.
refer.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
some more helps
Check out this thread:
table maintenance
http://help.sap.com/saphelp_erp2005/helpdata/en/a7/513520407a11d1893b0000e8323c4f/frameset.htm - a link for basics on Table Maintenance.
Also, Check out this weblog on table maintenance:
/people/sudheer.cheedella/blog/2006/02/20/extracting-data-in-table-maintenance
<b>how to create a a T-code of that</b>
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
WRITE
viewname = give ur table name.
show = X
save and check it once...
now u can able to call ur table through ur new t.code...
rgds
anver
if hlped pls mark points -
How to create the Export Data and Import Data using flat file interface
Hi,
Request to let me know based on the requirement below on how to export and import data using flat file interface.....
Please provide the steps involved for the same.......
BW/BI - Recovery Process for SNP data.
For each SNP InfoProvider,
create:
1) Export Data:
1.a) Create an export data source, InfoPackage, comm structure, etc. necessary to create an ASCII fixed length flat file on the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
1.b) All fields in each InfoProvider should be exported and included in the flat file.
1.c) A process chain should be created for each InfoProvider with a start event.
1.d) If the file exists on the target drive it should be overwritten.
1.e) The exported data file name should include the InfoProvider technical name.
1.f) Include APO Planning Version, Date of Planning Run, APO Location, Calendar Year/Month, Material and BW Plant as selection criteria.
2) Import Data:
2.a) Create a flat file source system InfoPackage, comm structure, etc. necessary to import ASCII fixed length flat files from the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
2.b) All fields for each InfoProvider should be mapped and imported from the flat file.
2.c) A process chain should be created for each InfoProvider with a start event.
2.d) The file should be archived in the
ctnhsappdata\iface\SCPI063\Archive directory. Each file name should have the date appended in YYYYMMDD format. Each file should be deleted from the \Out directory after it is archived.
Thanks in advance.
TysonHere's some info on working with plists:
http://developer.apple.com/documentation/Cocoa/Conceptual/PropertyLists/Introduc tion/chapter1_section1.html
They can be edited with any text editor. Xcode provides a graphical editor for them - make sure to use the .plist extension so Xcode will recognize it. -
How to create a sub total and grand total using my query.
How can I create a sub total for each section and grand total for using my query like this. your help is appreciated. I am working with 9g
WITH BidItemsInformation AS
( SELECT DISTINCT q.iplineno "Line Number", q.section "Section Number",
i.item "Item Number",
initcap(i.idescr) "Description" ,
i.iunits "Unit",
q.qty "Quantity" ,q.price "Engineers Unit Price",
(q.price * q.qty) "Engineers Estimate"
FROM letprop l,
proposal p,
propitem q,
bidlet b,
bidtabs c,
itemlist i,
vendor v,
bidders d
WHERE(l.letting = b.letting
And b.letting = c.letting
And p.cspecyr = i.ispecyr)
AND q.prpitem = i.item
AND p.contid = l.lcontid
AND q.contid = p.contid
AND c.vendor = l.avendor
AND l.CALL = c.CALL
AND q.lineflag = c.lineflag
AND q.iplineno = c.iplineno
AND l.letting = d.letting
AND c.letting = l.letting
AND c.CALL = d.CALL
AND v.vendor = d.vendor
-- AND AND l.letstat = 'A'
AND c.lineflag = 'L'
AND l.letting ='&letting'
AND l.CALL = '&call'
), BiddersInformation AS
-- This is where you make your changes for vendor name and vendor number Do not touch the above code
-- It is always the same for any call number and letting date
( SELECT IPLINENO "BLine Number",
MAX(CASE WHEN VENDOR='K020' THEN bidprice ELSE NULL END) "K020:: Unit Price",
MAX(CASE WHEN VENDOR='K020' THEN bidprice ELSE NULL END) K,
MAX(CASE WHEN VENDOR='H438' THEN bidprice ELSE NULL END) "H438:: Unit Price",
MAX(CASE WHEN VENDOR='H438' THEN bidprice ELSE NULL END) H,
MAX(CASE WHEN VENDOR='U010' THEN bidprice ELSE NULL END) "U010:: Unit Price",
MAX(CASE WHEN VENDOR='U010' THEN bidprice ELSE NULL END) U,
MAX(CASE WHEN VENDOR='G110' THEN bidprice ELSE NULL END) "G110:: Unit Price",
MAX(CASE WHEN VENDOR='G110' THEN bidprice ELSE NULL END) G,
MAX(CASE WHEN VENDOR='H530' THEN bidprice ELSE NULL END) "H530:: Unit Price",
MAX(CASE WHEN VENDOR='H530' THEN bidprice ELSE NULL END) H1
FROM BIDTABS
WHERE LETTING='&letting'
AND CALL='&call'
AND BIDPRICE <> 0
GROUP BY IPLINENO
SELECT BidItemsInformation."Line Number",
BidItemsInformation."Section Number",
BidItemsInformation."Item Number",
BidItemsInformation."Description",
BidItemsInformation."Unit",
BidItemsInformation."Quantity",
BidItemsInformation."Engineers Unit Price",
BidItemsInformation."Engineers Estimate",
BiddersInformation."K020:: Unit Price",
(BidItemsInformation."Quantity" * K) "KGM CONTRACTORS INC",
BiddersInformation."H438:: Unit Price",
(BidItemsInformation."Quantity" * H) "HOFFMAN CONSTRUCTION COMPAN",
BiddersInformation."U010:: Unit Price",
(BidItemsInformation."Quantity" * U) "ULLAND BROTHERS INC",
BiddersInformation."G110:: Unit Price",
(BidItemsInformation."Quantity" * G) "GLADEN CONSTRUCTION INC",
BiddersInformation."H530:: Unit Price",
(BidItemsInformation."Quantity" * H1) "HOOVER CONSTRUCTION CO"
FROM BidItemsInformation,BiddersInformation
WHERE BidItemsInformation."Line Number" = BiddersInformation."BLine Number";
Line Number Section Number Item Number Description Unit Quantity Engineers Unit Price Engineers Estimate K020:: Unit Price
0010 0001 2011601/00003 Construction Surveying LS 1 143,000 143,000 75,000 75,000 67,080 67,080
0013 0001 2013601/00010 Survey Equipment LS 1 25,000 25,000 25,000 25,000 30,000 30,000
0020 0001 2015601/00030 Blast Monitor/Survey LS 1 50,000 50,000 30,000 30,000 35,000 35,000
0030 0001 2021501/00010 Mobilization LS 1 382,250 382,250 809,000 809,000 704,000 704,000
0040 0001 2021602/00010 Well Survey EACH 60 500 30,000 2,150 129,000 1,600 96,000
0050 0001 2031501/00040 Field Office Type D EACH 1 6,367 6,367 4,000 4,000 25,000 25,000
sub total:
1610 0002 2401501/01143 Structural Concrete (1a43) C Y 46 350 16,100 408 18,768 400 18,400
1620 0002 2401501/01362 Structural Concrete (1c62) C Y 68 200 13,600 204 13,872 200 13,600
1630 0002 2401501/03643 Structural Concrete (3y43) C Y 60 600 36,000 592 35,520 580 34,800
1640 0002 2401512/03633 Bridge Slab Concrete (3y33) S F 1,876 24 45,024 28 51,778 27 50,652
1650 0002 2401521/00030 Structure Excavation Class R C Y 17 125 2,125 1,000 17,000 500 8,500
1660 0002 2401541/00010 Reinforcement Bars LB 2,490 2 3,735 1 3,312 1 3,237
1670 0002 2401541/00011 Reinforcement Bars (Epoxy Coated) LB 12,380 2 18,570 1 17,703 1 17,332
1680 0002 2401601/00010 Structure Excavation LS 1 2,500 2,500 2,000 2,000 5,000 5,000
1690 0002 2402583/00020 Ornamental Metal Railing Type Special L F 284 150 42,600 194 55,096 190 53,960
sub total
1820 0003 2401513/00346 Type Curb Railing Concrete (3y46) L F 135 25 3,375 16 2,093 15 2,025
1830 0003 2401513/07447 Type Mod P-4 (Tl-4) Railing Conc (3y46) L F 302 85 25,670 72 21,593 70 21,140
1840 0003 2401541/00010 Reinforcement Bars LB 14,780 1 18,475 1 13,598 1 13,302
1850 0003 2401541/00011 Reinforcement Bars (Epoxy Coated) LB 76,720 1 103,572 1 85,926 1 84,392
1860 0003 2401601/00010 Structure Excavation LS 1 10,000 10,000 116,000 116,000 115,000 115,000
1870 0003 2402583/00020 Ornamental Metal Railing Type Special L F 132 150 19,800 184 24,288 180 23,760
sub total
totalYou can accomplish that using decode with the grouping function. It returns 1 when that column passed as argument was grouped (or is in some total) and 0 otherwise.
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> with t as
2 (select 'New York' city, 'US' country, 1 num from dual
3 union all select 'Los Angeles' city, 'US' country, 2 num from dual
4 union all select 'London' city, 'GB' country, 2 num from dual
5 union all select 'London' city, 'GB' country, 2 num from dual
6 union all select 'London' city, 'GB' country, 7 num from dual)
7 select decode(grouping(country), 0, country, 'GRAND TOTAL') country,
8 decode(grouping(city), 0, city, decode(grouping(country), 0, 'SUBTOTAL')) city,
9 sum(num) num_total
10 from t
11 group by rollup(country, city)
12 /
COUNTRY CITY NUM_TOTAL
GB London 11
GB SUBTOTAL 11
US New York 1
US Los Angeles 2
US SUBTOTAL 3
GRAND TOTAL 14
6 linhas selecionadas.
SQL> -
I did'nt created an apple id and someother is using my fake id how do i remove it from my device?
Sorry. You need to rephrase the question or post in your native language. This doesn't make any sense at all.
-
How to create file on application server?
how to create file on application server?
Hi,
The following program illustrates the creation of ifle in app server and reading the file from appli server:
DATA: ITAB LIKE vbakOCCURS 0 WITH HEADER LINE.
PARAMETERS: P_VBELN LIKE VBAP-VBELN.
START-OF-SELECTION.
SELECT *
FROM VBAP
INTO TABLE ITAB
WHERE VBELN = P_VBELN
PERFORM WRITE_DATA.
PERFORM READ_DATA.
*& Form WRITE_DATA
text
--> p1 text
<-- p2 text
FORM WRITE_DATA.
OPEN DATASET 'VBAP_DATA' FOR OUTPUT IN TEXT MODE.
LOOP AT ITAB.
TRANSFER ITAB TO 'VBAP_DATA'.
ENDLOOP.
CLOSE DATASET 'VBAP_DATA'.
CLEAR: ITAB, ITAB[].
ENDFORM. " WRITE_DATA
*& Form READ_DATA
text
--> p1 text
<-- p2 text
FORM READ_DATA.
OPEN DATASET 'VBAP_DATA' FOR INPUT IN TEXT MODE.
DO.
READ DATASET 'VBAP_DATA' INTO ITAB.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
APPEND ITAB.
ENDDO.
CLOSE DATASET 'VBAP_DATA'.
LOOP AT ITAB.
WRITE:/ ITAB-VBELN,
ITAB-POSNR.
ENDLOOP.
ENDFORM. " READ_DATA
If it is helpful rewards points
Regards
Pratap.M -
Hi All,
How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
Assume Material is Pen.
While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
Kindly help me out.
Thanks,
Renjith JoseA good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded" -
How to create a Custom UIView and How to instantiate that ?
How to create a Custom UIView and How to instantiate that ?
In Flash, all we need to do is create a MovieClip and assign it a class name in the library.
Instantiation is a simple matter of:
var newclass:CustomClass = new CustomClass({initialization_data:1652});
addChild(newclass);
At this current point in time, my understanding of creating custom UIView in xcode is limited to the understanding that you have to:
1: Forward declare the class in the header.
2:
]newclass *CustomClass in @interface's {}
and THEN
@property (nonatomic, retain) newclass *CustomClass;
in the header file also.
3: Nib initialization in the implementation file in viewDidLoad and do "addSubview".
==============================
Based on my limited understanding at this point, I find the need to
@property (nonatomic, retain) newclass *CustomClass;
at the header somewhat limiting...as it denotes you must know how many instance you will create in the application before hand.
I believe I am wrong here, hence, my question is, how do I add custom UIViews with initialization codes in real time ?hi,
one workaround i could think of is using the CM views to search for content that belongs to a category and display it in a custom way.
http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc904/wwsbr_api_view.html
this only allows you to search for the meta-data available in the CM views but not the content of an item that is available when doing a search.
in the next major portal release we will have a publich search API that can be used for these type of requirements. you can execute your search and format the results in the way you want.
regards,
christian -
How to create Remote Desktop Application in C# or port it from HTML5/JS project ?
Hi
How can create Remote Desktop Application in C# template ? I were searching on google but not found example or API for this.
If can, please suggest for me some solution, example and document.
And I have JavaScript project template Remote Desktop Application. Can i port it to c# ? Or use Webview to show it ?
I were create demo use webview to show it but it not run. Maybe i do some mistake or can't be do it.
Thanks.I have no other options. We already provide the RDP plug-in for JavaScript. I'm not sure what else is needed for this.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with
undefined objects and unknown namespaces.
My project needs work with C# Windows Store. So I need RDP on C#, not JS. If we don't support C#, do we have a RDP spec on Windows 8.1 so that we can follow that spec to implement with native code to support RDP? -
How to create a new variant and a job sheduled to use it for the exisisting programs
Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
<b>The commonly used ALV functions used for this purpose are;</b>
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
<b>
How you call this function in your report?</b>
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan -
How to create delivery device for all users ?
hi
help needed ...
i activated delivery tool
but i dont know how to create email devices for all users
is there any api / manual action
obiee version : Oracle Business Intelligence 10.1.3.4.1
thanks
yuvalYuval..u need to setup SA System in RPD..
refer http://oraclebizint.wordpress.com/2008/04/25/oracle-bi-ee-101332-sa-system-subject-area-autoloading-profiles-and-bursting/ -
I have two iPhones and synchronize with the same macbook. How do I segregate both applications and all the data?
Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy -
I have MBP retina 15". My track pad is not working well. It moves by itself, create folders, opens applications and I have to go against to it.
Do you have BlueTooth device with depleted battery nearby?
If that is not the case, you have to take the computer to the nearest
Apple store to have it checked out.
Best. -
Hello there,
I created a DPS application and I want that when you click on an image, it opens a pdf. But this one is on the ipad.
This is in case there is no internet connection.
Thank you.How to make the zip: http://helpx.adobe.com/digital-publishing-suite/help/import-htmlresources.html
How to link to the asset: Digital Publishing Suite Help | Hyperlink and button overlays
Neil -
Can anybody suggest me how to creat match code id and object
hi Gurus,
can any body suggest me how to create match code object and match code id..
in my program i need specific values in search help..
to avoid confusion in selecting the values.
i need only selcted values..
thanks in advance.
vijay chavanHi
In Older SAP versions Match codes are used, now they are replaced by SEARCH HELPs
there 2 types of search helps
Elementary and Collective
see the doc and create accordingly
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=2176485
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=3601619
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
https://forums.sdn.sap.com/click.jspa?searchID=4390517&messageID=1712818
Collective search help Combine several elementary search helps. A collective search help thus can offer several alternative search paths.
A Collective search help provides alternative search
Paths by combining elementary search helps.
Only one search help can be attached to a field, table or data element. Several search paths are therefore attached with a collective search help.
A collective search help also has interface parameters like
an elementary search help.
Like an elementary search help, a collective search help has an interface of IMPORT and EXPORT parameters with which the search help exchanges data. Using this interface, the collective search help can be attached to fields, tables and data elements exactly like an elementary search help.
Parameter assignment needs to be done for each of the
Included search helps.
When you define a collective search help, there are no components for describing the dialog behavior and data selection; instead the included search helps are listed here. You must assign the parameters of the collective search help to the interface parameters of the included search help for each inclusion.
User may choose the tab and thus the elementary
search maethod.
When we execute the search help SCUSTOM, we are confronted with a dialog which gives us an option of either restricting
By 1)Search for customer according to booking
2)Search for customer according to name.
These are effectively the elementary search helps (SCUSTOM_BOOK and SCUSTOM_NAME) which have been included in the collective search help SCUSTOM.
HOT KEY
The hot key is used to select the elementary search help from the collective search help and to enter the restrictions in the dialog box for restricting values directly from the entry field. If the user often searches for values using the same search help, this procedure can save time.
Steps to create a Collective Search Help
1)Enter the search help name and click on create.
2)Choose Collective search help radio button option as the search help type.
3)Enter the search help parameters.
4)Instead of the selection method, we enter the included
search helps for the collective search help.
5)We need to assign parameters for each of the included
search helps.
6)Complete the parameter assignment by clicking on the push button
7)Collective search help offers the user to obtain F4 help
using any of the included search helps.
Regards
Anji
Maybe you are looking for
-
Where are the Dual Microphones on 15" MacBook Pro Retina Late 2013?
I have just bought a 15inch macbook pro retina late 2013. on the site it mentiones that on the side there are dual microphones but no matter how hard and close i look at the side where the two thunderbolts, headphone jack, USB and Magsafe are i can n
-
Adobe Flash Player 17 installer stuck on 25%
I am trying to update my flash player from version 16 to 17, but on 17's installer it just keeps getting stuck at 25%. I have tried uninstalling 16 and then installing 17, but that didn't work. Any suggestions on what I can do? Macbook Air (13 inch,
-
Hello, Thanks for the help on the forum. We have been looking into open source software for data management and we would be interested in a similar field. We are wanting to implement SOA. It would be to complete our existing software. What would you
-
I had issues with upgrading Firefox. Teh error message said that Firefox was unable to install certain upgrades. I uninstalled firefox completely, then started up IE, went to the Firefox website and clicked on the "Download Firefox" button. Then IE c
-
Our application is in C++ which interfaces with Oracle 10g database using OCCI. The mapping objects are created using OTT. The type of these mappisng objects in PersistentObject. Our development machine(Solaris 8) and database machine are different.