How to create SNMP Agent

Hi,
Good Morning every body, i am new person to this group. plz help me,
i want to create a simple SNMP agent , Which API should i need to use.
Regards
Dev Reddy

UDP, on the SNMP port. You should also read up on MIB.

Similar Messages

How to configure SNMP agent for Oracle 10g

Hello,
I've installed oracle 10g in a Windows 2000 SP4 and I want to monitor database using SNMP.
I've already installed Windows SNMP agent but I haven't any idea how to configure Oracle in order to grant SNMP monitoring.
What should I do?
Is Oracle database ready to be monitored via SNMP by default?
Thanks in advance for your help.
Regards,
Carles

Hello,
Thanks for your message.
In fact, I already found this doc in oracle, but it just show executables I have to install and my question can I install these executables.
I've already installed Windows SNMP agent, configured and testedwith disk space checkings, but it doesn't work fine with Oracle.
I launched Oracle Universal Installer and I checked Installed Products, but I haven't found how to install SNMP agents for oracle.
How can I add Oracle Peer Master Agent and Encapsulator to my oracle installation?
Thanks again for your help.
Regards,
Carles

How to use SNMP Agent

Hi All,
Can anybody tell me how to use SNMP Agent to monitor the Access and Identity Servers

Hi Ramesh,
I cannot comment on WebLogic & SNMP - this kind of questions would
probably need to be asked on a WebLogic forum.
If you're looking for an SNMP Manager API though, you may want to have a
look at the Java Dynamic Management Kit (commercial product,
free evaluation):
http://java.sun.com/products/jdmk/index.jsp
Hope this helps,
-- daniel
JMX, SNMP, Java, etc...
http://blogs.sun.com/jmxetc
null

How to create new agent types in transaction CBIH92.

Hi guru's,
Can anybody tell me how i can create new agent types .
thanks and regards,
Pronoy.

Hi Pronoy
Agent types are not created in CBIH92, those have to be created in IMG setting as per following path
SPRO --> Environment, Health and Safety --> Industrial Hygiene and Safety --> Risk Assessment --> Specify Agent types
Hope it will help you.
Regards
Vikram

How to create Forwarding Agent?

Hi Gurus,
Can anybody throw some light regarding Forwarding Agent,Personnel and contact persons.....
1.How to create them(In detail)?
2.How to mention them in CMR of sold to party?
3.Who are they?
Thanks in advance.
Points will be awarded for sure.
Venkat

Contact persons are natural persons whom you must contact at the customers for business processing (for example, purchasers) It is not necessary for you to be a customer employee, you could, for example, be an independent advisor.
You can create contact persons directly in the customer master record. You are then assigned to this customer. The contact persons can however be assigned to other customers.
Forwarding agent
A forwarding agent is an example of a business partner on the credit side, who is included in a sales process. If you commission a particular forwarding agent for deliveries to a specific customer, you can define the forwarding agent in the customer master record as the partner.
Possible partner functions on the credit side in the sales process are for example,interpreters, auditors.
Personnel
Employee responsible
Sales personnel
You can enter an employee from your firm as the person responsible:
In the customer master: if the employee is normally responsible for processing transactions with this customer
In the sales document: if the employee is responsible for processing the business transaction.
sales and distribution under Basic functions--> Partner Determination -
>Define and assign partner determination procedures.

How to create snmp trap signal

hello friends,
I am going to create NMS tool for my wireless devices.
We are using java for front end monitoring.
For my project work, how can I create SNMP Trap signal.?
Any examples is there.
thank you.
Rgds,
ram

There are many ways to modify the array to do what you want. One of my favorites is to use the "Insert Into Array" function. Just build an array of each waveform you wish to generate and arrays of 0 or NaN (depending on what you agilent device will accept) for the no signal gaps. Append them all together and you will have your arbitrary waveform for your generator.
Kyle K.
Product Manager for Product Data
National Instruments

How to create an agent like a task

Hi EH&S Gurus
In the EH&S documentation it's said that we can create an agent like a task from the Organizational Management (PA-OS) component.
I 'm new to EH&S and in don't find the way to do it.
In the customizing we have a TASK agent type but we can't create a it with transaction CBIH92.
From the help.sap.com :
"An agent can, for example, be a specification, a material, or a task from the Organizational Management (PA-OS) component."
Thanks a lot for your help
Samuel

Hi Samuel,
You can get create an Agent as a Task by using the following steps:
1. Go to Customizing --> EHS --> Industrial Hygiene & safety --> Risk Assessment --> Specify Agent Types
2. Click on "TASK' Agent type and click on Details icon (CtrlShiftF2)
3. In the "Only EHS-IHS" drop down, Select "No"
4. Save the entry
5. Now try creating an Agent [CBIH92] and you can create an Agent as a Task.
Hope it Helps,
Raghu

How to use report agent to accelerate report processing?

hi
i have a report that runs 11 seconds. i have create aggregation for the cube, but it seems doesn't help much. i think may be report agent would helps. can anyone tell me how to create report agent to accelerate report processing step by step ?

Please refer -
http://docs.oracle.com/cd/E21764_01/doc.1111/e15867/reporting.htm
http://jvzoggel.wordpress.com/2012/01/18/osb_tracing_report_action/
Regards,
Anuj

How do I restart the SNMP agents with the original command line options?

I'm creating an application that changes the SNMP trap target configuration files and then restarts the SNMP agent. I'm currently working with the mibiisa agent. I want to make sure that I restart the service with the new trap targets but with the original command line options. How can I restart the mibiisa service with the same command line options that it originally loaded with?

It is not "Network Time" that is the problem, but actually "SystemStarter." SystemStarter is an interim kludge to enable the work or the old StartupItems until they can be converted to LaunchDaemons or LaunchAgents controlled by launchd. Launcd calls SystemStarter to launch all the unconverted StartupItems. ntpd is now under the control of launchd directly.
Launchctl is the command to load and unload the plist files, but I don't think it has a mechanism to restart a daemon.
There are start and stop commands in launchctl, but the man page indicates that they are for debugging purposes.
I also imagine you could just kill the ntp daemon and let it restart with new settings. It is most likely set to "keepAlive" so that it will automatically restart.

How to Create a Unix Agent and data stage adapter

Hi Gurus,
I am new to this tool. We have installed trail version of tidal scheduler tool. Kindly let me know how to create a unix agent and data stage adapter using some screen shots. Also please let me know is it possible to create agents on trail version
Thanks,
Saravanan Viswanathan

edburns wrote:
Can someone please tell me how to create a Unix Group on Leopard and how to add myself to that group?
Ed
man dseditgroupshould help. Look particularly at the examples.

How to create and configure proxies in ADF mobile using OWSM client agent?

Hi
Can anyone please tell me how to create and configure proxies in ADF mobile application using Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent. I read it in mobile document that,
For secured web services, the user credentials are dynamically injected using ADF Mobile uses Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent to create and configure proxies, as well as to request services through the proxies. The user credentials are injected into the OWSM enforcement context when proxies are configured.
I am new with this OWSM, can anyone please give me some hints like how to proceed further for implementing authentication using OWSM lite mobile ADF Application Agent??
Thanks in advance
Raj

Hi Juan
The demo is very useful, and in that Shay describes about the remote login using a regular ADF webapplication as a secured one and deploying it into the server. But I would like to know how to create a local login using OWSM client agent? .
Without creating a regular ADF webapplication, how can i call secured webservices(i.e., by using OWSM client agent how to create and configure proxies to call secured webservice, where the user credentials are injected into webservice request by OWSM client as mentioned in ADF mobile document)??
Regards
Raj

How to create reports servers with the same name in two nodes in Reports

Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.

Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas?

How to create an encrypted key for a user table

I have an airshow website where volunteers and vendors can apply online (www.hollisterairshow.com) . The city attorney requires that we have a wet signature on a printed application form so the volunteer/ vendor currently has to print their application at the time they apply online, then sign it and mail it in and this works fine. Unfortunately, we have had a lot of instances where volunteers/ vendors needed to print their application again and the only way we could do this was for an administrator to print their application to a pdf file and e-mail the file to them. So, I'd like to improve this process by automatically sending an e-mail to the applicant when they apply online with a link to a printable page and containing a key pointing to their application. This way, volunteers/ vendors could print and sign their application whenever they want and as many times as they need to. Each volunteer is a single row in a volunteer table and each vendor is a single row in a vendor table.
The key I use in the tables is a sequential key automatically incremented by MySQL so I would end up sending them a link looking something like www.hollisterairshow.com/printvolunteerapp.php?volunteernumber=27 . This would work, but it wouldn't be hard for a volunteer to change it to a different volunteernumber and so get access to someone else's personal information, which would not be acceptable. So, I'm thinking I need a secondary key that is somehow scrambled and used as an secondary index in the table so I'd be sending a link that mght look like www.hollisterairshow.com/printvolunteerapp.php?volunteerkey=sygew . So I'd really appreciate some advice on how to create a scrambled secondary index for each volunteer or vendor and plug it into the link I send them in the e-mail.
Thanks for any advice.
Tony

Your question is not clear whether you want to create account or you want to create agent.
For creating local agent you can refer
http://bhabaniranjan.com/configure-odi-11g-local-agent/
For creating EE Agent you can refer
http://bhabaniranjan.com/configure-odi-java-ee-agent-on-windows-server-2008-64-bit/
For creating account, login to supervisor and then go to security tab. There you can create different user to login to odi Studio. Let me know If i understand you correctly or not.
Thanks.

Error is in example "How to Create Online and Offline Forms in Web Dynpro"

Hi,
I am developing " How to Create Online and Offline Forms in Web Dynpro " in nwds 7.0. This is standard example which is available at sdn. but when i run it gives me error like "
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.travelrequestapp.TravelRequestComView.wdDoInit(TravelRequestComView.java:97)
    at com.travelrequestapp.wdp.InternalTravelRequestComView.wdDoInit(InternalTravelRequestComView.java:133)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
    at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
    ... 34 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0009.20060804145649.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:41:58[UTC], changelist=413534, host=pwdfm101), build date: Thu Feb 15 10:23:57 IST 2007
J2EE Engine 7.00 patchlevel
Java VM Java HotSpot(TM) Server VM, version:1.4.2_13-b06, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Session & Other
Session Locale en_US
Time of Failure Mon Oct 29 12:13:24 IST 2007 (Java Time: 1193640204484)
Web Dynpro Code Generation Infos
local/TravelRequest
SapDictionaryGenerationCore 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-14:14:59:42[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates (unknown)
SapGenerationFrameworkCore 7.0006.20050713144242.0000 (release=645_VAL_REL, buildtime=2006-01-14:14:48:59[UTC], changelist=357697, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-14:15:05:10[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-14:14:49:45[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-14:14:49:38[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0006.20051128142655.0000 (release=645_VAL_REL, buildtime=2006-01-14:14:57:39[UTC], changelist=378069, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0006.20051128151854.0000 (release=645_VAL_REL, buildtime=2006-01-14:15:02:09[UTC], changelist=378109, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0006.20060111154644.0000 (release=645_VAL_REL, buildtime=2006-01-14:15:18:33[UTC], changelist=384368, host=pwdfm101)
SapWebDynproGenerationCore 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-14:15:05:21[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0006.20060111154644.0000 (release=645_VAL_REL, buildtime=2006-01-14:15:18:33[UTC], changelist=384368, host=pwdfm101)
sap.com/tcwddispwda
No information available null
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
java.lang.NullPointerException
     at com.travelrequestapp.TravelRequestComView.wdDoInit(TravelRequestComView.java:97)
     at com.travelrequestapp.wdp.InternalTravelRequestComView.wdDoInit(InternalTravelRequestComView.java:133)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:793)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:296)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:767)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
So please help me to correct this error .....
Help will be rewarded.
Regards,
Gurprit Bhatia

Hi Gurprit,
A null value is being passed at runtime. Make sure that you enter values when filling in the form.
Also check for the cardinality of the nodes being used. You can also initiliaze your value attributes as follows:
In wdDoInit() method:
wdContext.currentNodeAElement.setValueA("");
Context is as follows:
RootNode
|____NodeA
        |_____ValueA
Hope it helps.

How to create an Excel file from XML in the Receiver File Adapter Comm Ch

How do I create an Excel file from XML in the Receiver File Adapter Communication Channel? I have my mapping done and I am outputting the file as a comma delimited csv file. However, the target can only process an Excel file (.xls). How can I generate an Excel in XI?
I saw this blog, but I don't know how to create a XSLT transformation.
/people/michal.krawczyk2/blog/2005/12/10/xi-generating-excel-files-without-the-java-nor-the-conversion-agent-not-possible
Any help would be appreciated. Thanks.

Here are the steps I took to create an XSLT transformation in XI 3.0:
1. I created my source and target XSDs using XMLSpy.
2. I created the XSLT mapping from source to target in XMLSpy (referencing the souce XSD schema).
3. I created another XSLT mapping to format the target into Excel XML.
4. Import the source and target XSDs in the IR's External Definitions
5. Zip each XSLT mapping (.xls) and import it into the IR's Imported Archives
6. Reference the XSL mappings in the Interface Mapping

How to create SNMP Agent

Similar Messages

Maybe you are looking for