How to create standby

Hi ,
i am new to oracle,installed oracle11g on linux,planning to create/practice oracle standby database.
can plz suggest any link which is having step by step config.
thanks,
Mike.

1000611 wrote:
Hi ,
i am new to oracle,installed oracle11g on linux,planning to create/practice oracle standby database.
can plz suggest any link which is having step by step config.
thanks,
Mike.welcome to oracle DG forum.
please refer below link.
http://www.oracle-base.com/articles/11g/data-guard-setup-11gr2.php
http://docs.oracle.com/cd/B28359_01/server.111/b28282/configbp006.htm

Similar Messages

How to create standby database by using duplicate

Dear all,
How to create standby database by using duplicate,is there some doc to read?

Hi;
You can use
Step-By-Step Guide To Create Physical Standby On Normal File System For ASM Primary using RMAN [ID 838828.1]
Creating Physical Standby using RMAN Duplicate Without Shutting down The Primary [ID 789370.1]
Also use goole, there are many blog-site-dogs mention that topic. From googling:
Creating a Standby Database with Recovery Manager
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmdupdb.htm
http://www.pythian.com/news/248/recipes-for-creating-a-managed-standby-with-rman/
http://docs.oracle.com/cd/B19306_01/server.102/b14239/rcmbackp.htm
Regard
Helios

How to create standby database

Hi,
How to create standby database, in other server.

Mariappan wrote:
Hi,
How to create standby database, in other server.There are lots of docs available on net.
Try the below link...
http://neeraj-dba.blogspot.com/2011/06/standby-database-in-oracle-11g.html
--neeraj

How to create Standby database in Oracle 9i

Is anybody guide,
How to create a standby database in Oracle 9i(9.2.0.1) ?
Where we get the proper documentation about this article ?

http://www.oraclebase.com/articles/9i/DataGuard.php
or
tahiti.oracle.com

How to create standby controlfile from restored backup

Hi Techies,
I am re-building one of my DR server, Source and target DB is oracle 10g.
I have taken the source backup which is going to be restored on target, But I forgot to take a standby controlfile from source DB at the time (Pre/Post) backup.
Now the issue is I can create a standby controlfile on primary and copy the same to target, But so many datafiles are added after the backup which I have taken to restore and medias are already shipped.
I can send the other set of backup to DR site, but it takes a week time and I don't want to do that If I can regenerate it.
So any clue to create standby controlfile on target with restored datafiles?
Regards,
Nick Loy

Hmm... sounds like you perform this in a rather manual fashion...
Do you use RMAN for taking the backups?
Or maybe the BR*TOOLS?
With these tools you are usually safe from such mistakes - I can only recommend to use them!
However, since you don't have a control file at all on the target side, the only thing left to do would be to
ALTER DATABASE BACKUP CONTROLFILE TO TRACE NORESETLOGS;
on the primary side and manually remove the files that have been added since you took the backup from the control file script,
Afterwards you use the script on the standby side to create the control files.
regards,
Lars

How to create a standby database?

I am running Oracle 8.1.5 on Sun Solaris. How to create a standby database? Can somebody tell me the step-by-step procedure?

Can you tell what version of Oracle you are running, because the steps can vary depending on your version.

How to create physical standby database without dataguard

Hi,
Can anyone please help me how to create Physical Standby Database without dataguard. As i am using Oracle 10.2.0.1 Standard Edition for production databases.
Please find the specifications of my server :
Database : Oracle 10.2.0.1(Standard Edition)
Server : Linux 4.0(32 bit machine)
As we know that Dataguard cannot be created in Standard Edition as we dont have that option in this edition. So please help me how to create the physical standby database.
Thanks in advance.
Regards,
Farooq

Hello,
I hope this link helps you out...
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rcmbackp.htm
http://www.dbasupport.com/oracle/ora10g/manual_standby.shtml
Thanks & Regards
Pratik Lakhpatwala
Jr Oracle DBA
Edited by: Pratik.L on Dec 31, 2009 12:03 PM

How to create a standby redolog from rac to non rac ??

Hi,
How to create a standby redolog from rac to non rac DR setup..???
in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??
pls help

854393 wrote:
Thanks Shivanandha,
(maximum number of logfiles for each thread + 1) * maximum number of threads
Using this equation reduces the likelihood that the primary instance's log writer (LGWR) process will be blocked because a standby redo log file cannot be allocated on the standby database. For example, if the primary database has 2 log files for each thread and 2 threads, then 6 standby redo log file groups are needed on the standby database.In maximum performance mode you can keep same number of redo logs but having one more redo log member for each thread is recommended and mandtory for other protection modes.
How to create a standby redolog from rac to non rac DR setup..???
in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??pls help
Yes, even your DR is RAC or non-RAC, you must have both threads, because each instance information exist on own thread, So to perform redo transition from both the instances, you must have both standby redo log threads even though if it is non an RAC DR.
Hope This helps.

How to create db refresh using standby

Hi all,
Please any one tell me how to create clone using standby database .We have a stand by in some other state say x. The test instance which running in stand by place (i.e x) should create with stand by. Usually we copying the PROD backup to stand by server . so it takes some long time. So we would like to create refresh from standby database.So please provide how to do.
Regards
Gobinath.R

Welcome to Forum
When ever you post your question mention your database version number
Why don't you search simply in Google for this
http://www.lmgtfy.com/?q=clone+the+database+using+standby+database
Anyhow here i give some sites for you
http://gavinsoorma.com/2012/04/performing-a-database-clone-using-a-data-guard-physical-standby-database/

How to create a physical RAC standby from a RAC primary on Std Edition 11g

Hi All,
I need to create a physical RAC standby with ASM (2 nodes - Linux) from a RAC primary(2 nodes - linux) with Standard Edition 11g. But I don´t want to use dataguard.
I know that to use dataguard is possible only Enterprise Edition.
Does anybody knows about any documents ID on metalink or any article about this ?
I appreciate if may help me.
Thanks.
Wander(Brazil)

Wander(Brazil) wrote:
Ok, but i need to RAC physical standby with 2 nodes.Yes you can create standby RAC as well and you also can look option of dbvisit which provides high availability even in standard edition with low licensing prices
in detail you can go through with this link http://www.dbvisit.com/products/dbvisit_standby_database_for_oracle_disaster_recovery
>
Wander(Brazil)
     Newbie
Handle:      Wander(Brazil)
Status Level:      Newbie
Registered:      Sep 23, 2005
Total Posts:      116
Total Questions:      21 (20 unresolved)
Name      Wander(BH-Brazil)
Location      BH (Brazil)
Occupation      Database Administrator
>
Please consider closing your old thread as answered.
Edited by: CKPT on May 21, 2013 10:11 AM

How to configure standby database in a single machine

I am in Windows XP professional and oracle 9i . I want to configure a standby database for a database called proddb in the same machine. For doing this, I created a standby controlfile. But this work for the same name standby database?. How this happen ? two database with same name possible? How to create the second database (Standby) Please help?
Shiju

The Oracle Solaris Cluster concepts guide has some information on which zone model to choose:
http://docs.oracle.com/cd/E18728_01/html/821-2682/gcbkf.html#scrolltoc
When managing a Solaris zone with the HA Zones agent, the cluster basically regards the non-global zone as a blackbox.
As such you can either start the Oracle database as part of the runlevel/SMF startup of the non-global zone, or you can use the sczsh or sczsmf component and use your own scripts to start, probe and stop the Oracle database.
Usage of the standard HA Oracle data service is not supported in combination with the HA Zones agent.
If you require a more fine grained control of services running in non-global zones, why not setup a zone cluster and then having HA Oracle failover the Oracle database between non-global zones?
Regards
Thorsten

How to create temp files in temp tablespace

Dear all,
Due to outage of our SAN, we our out of production for the
last 3 days. By the grace of Almighty we have restored production by
database recovery from our standby backup. Since temp tablespace and
temp data files do not taken as backup for standby, now after recovery
we are getting abap dumps asking for temp_1 and temp_2 datafiles.
Please guide us how to create temp files. v$tablespace is showing tablespace PSAPTEMP but datafile are not there
Abap dumps are giving these errors as mentioned below
====================================================
The exception must either be prevented, caught within the procedure
"DATA_SELECTION"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-01157: cannot identify/lock data file 256 -
see DBWR trace file#ORA-01110: data file 256:
'/oracle/SD1/sapdata4/temp_2/temp.data2'"
Internal call code.........: "[RSQL/FTCH/MARA ]"
===================================================
another one asking for
'/oracle/SD1/sapdata3/temp_1/temp.data1'"
Best Regards
Waqas

if you want to add a new tempfile to your TEMP Tablespace,you can do like that.
ALTER TABLESPACE <name of TEMP Tablespace> ADD TEMPFILE <pfad to the file_and_file name> SIZE <size>;
You can use also the options REUSE autoextend off or on .
e.g:
alter tablespace PSAPTEMP add tempfile '/oracle/SD1/sapdata4/temp_2/temp.data2' SIZE 1000K REUSE;
The directory temp_2 should exist.
Or you can use the BR*Tools to create a new datafile. Enter brtools and follow the instructions or menu.
More to TEMP Tablespaces see please following SAP notes:
659946 - FAQ: Temporary tablespaces
600513 - ORA-25153 after recovery due to missing tempfiles
and the Oracle Note:
160426.1: TEMPORARY Tablespaces : Tempfiles or Datafiles ?
I hope it helps.

How to recover standby by rman

Hello every one
Oracle 11g2 on window server 2008
For testing i have created standby server and shutdow it.
I have also schedule the increamental backup daily in the morning at 5:00 am.
Suppose if primary server has crashed at day time at 11:00 am as whole and standby database has lag of two days with respect to primary server
I have all archive log till 11:00 am, rman backup and control at 5:00 am.
Process that followed to recover the standby server .
1) restore the control file to standby database
2) copy the rman backup to standby server and catalog it.
3) restore the database successfully
4) recover database but it give error
RMAN-03002: failure of recover command at 10/31/2013 14:55:40
ORA-19693: backup piece C:\BACKUP\STD_5TONPQ57_1_1 already included
5) i have issued alter database open but gives following error
ORA-10458: standby database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'C:\ORACLE\ORADATA\SLATE\SYSTEM01.DBF'
any help how to recover the standby server by rman incremental backup

yasirdba wrote:
Hello every one
Oracle 11g2 on window server 2008
For testing i have created standby server and shutdow it.
I have also schedule the increamental backup daily in the morning at 5:00 am.
Suppose if primary server has crashed at day time at 11:00 am as whole and standby database has lag of two days with respect to primary server
I have all archive log till 11:00 am, rman backup and control at 5:00 am.
Process that followed to recover the standby server .
1) restore the control file to standby database
2) copy the rman backup to standby server and catalog it.
3) restore the database successfully
4) recover database but it give error
RMAN-03002: failure of recover command at 10/31/2013 14:55:40
ORA-19693: backup piece C:\BACKUP\STD_5TONPQ57_1_1 already included
5) i have issued alter database open but gives following error
ORA-10458: standby database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'C:\ORACLE\ORADATA\SLATE\SYSTEM01.DBF'
any help how to recover the standby server by rman incremental backup
Hi Yasir!
If you have all archived log, and control file backups.
Then you must follow this steps
1. Restore Standby control file;
2. Copy archived logs to a folder (/tmp/arch) or FRA
3. RMAN>alter database mount;
RMAN> catalog start with '/tmp/arch'; (or FRA)
RMAN must be cataloged all archived logs;
4. Start redo apply process for apply archived log;
5. If All archived logs applied, then you can perform failover to standby database.
It means Standby database role will change to Primary.
Do you want this?
Regards
Mahir M. Quluzade

Creating standby database

Hi
I want create standby database in Oracle 10g.
I can create standart database by using database configuration assistant.
How can I create standby database in Oracle 10g?

Hi,
Standby databases, in a nutshell, acts as a failover for our mission critical production databases. When production database crashes, applications can quickly switchover to the stand by databases.
What type of Standy you are willing to go for ??
Physical Standby Database
Standby database is called “physical” if the physical structure of stand by exactly matches with stand by structure. Archived redo log transferred from primary database will be directly applied to the stand by database.
Logical Standby Database
Stand by database is called “logical”, the physical structure of both
databases do not match and from the archived redo log we create SQL statements then these statements will be applied to stand by database.
Follow this link for creating standby database
http://www.oracle-base.com/articles/8i/StandbyDatabase.php
http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/create_ps.htm
Thanks
Pavan Kumar N

Problem when create standby database

hello,
I have two server(NT4.0,SP6) installed Oracle 8i(8.1.6 Enterprise) at the same directory.I want one as the primary database,another one as the standby database.
The two database have the same SID,use SQL*Plus it can access each other.
My operating steps as below:
1.on primary server:
1)connect internal;
2)shutdown immediate;
3)copy all datafiles(*.DBF) to a backup directory;
4)startup
5)alter database create standby controlfile as 'd:\oracle\ora81\ILLDB\standby.ctl'
6)alter system archive log current
2.on standby server:
1)copy all backuped datafile,standby.ctl,all redo log files from primary server to standby server,overwrite all same name files;
2)modify the init.ora,add this parameter:
"standby_archive_dest = "location=D:\Oracle\oradata\ILLDB\archive" ";
3)statup oracle service in Service control manel;
4)run svrmgrl.exe;
5)startup nomount;
6)alter database mount standby database;
then a error message appear:
"ORA-01665 controlfile is not a standby controlfile".
I don't know which step is mistake.Please tell me correct steps.
Thanks

I did face the similar problem while trying to create and startup a clone database for Point in Time Recovery (PITR). The error message is
ORA-01696 controlfile is not a clone controlfile
Are you folks have any idea how do I resolve this problem?? Is there any way to create clone control file??

How to create standby

Similar Messages

Maybe you are looking for