How to create stock in Make to order and make to stock segments?

Hi,
Could u please tell me how How to create stock in Make to order and make to stock segments?
Regards,
AS

Hi,
If you are processing production order, use tcode MB31with mvt type 101, system will create stock. This method is same for both make to order and make to stock scenarios.
For initial stock upload you can use 501 or 561 mvt for make to stock and for Make to order use same mvt typt with special indicator E.
Regards,
Dharma

Similar Messages

  • How to create or process make to order

    Hi
    How to create or process make to order using transaction va01
    thanks

    Hello,
    The material which is used in MTO process will be a confirgurable material and item category group will be 0002.
    In MTO th stock will be raised as a sales order stock. So once you create a sales order, the stock will be raised in MB1C with moevemtn 561 and special stock indicator E.
    Prase

  • How to create a WMI filter in order to apply to machines that have Skype already installed with deploying a newer version of Skype

    Hi there,
    I was wondering whether anybody could tell me how to create a WMI filter in order to apply to machines that have Skype already installed with deploying a newer version of Skype.
    Your help would be much appreciated.
    Many thanks,
    Timbuctoo

    Hi,
    To create a WMI filter
    1.In the Group Policy Management Console (GPMC) console tree, right-click
    WMI Filters in the forest and domain in which you want to create a WMI filter.
    2.Click
    New .
    3.In the
    New WMI Filter dialog box, type a name for the new WMI Filter in the
    Name box, and type a description of the filter in the Description box.
    4.Click
    Add .
    5.In the
    WMI Query dialog box, either leave the default namespace (root\CIMv2) or enter another namespace by doing one of the following:
    ◦ In the
    Namespace box, type the name of the namespace that you want to use for the WMI query.
    ◦ Click
    Browse , select a namespace from the list, and then click
    OK .
    6.Type a WMI query in the
    Query box, and then click OK .
    7.To add more queries, repeat Steps 4 through 6 to add each query.
    8.After adding all queries, click
    Save .
    In the Query box, type the following WMI query:
    Select * from Win32_Product where Name LIKE “%Skype%”
    Best Regards,
    Erin

  • How to create Billing Plan in sales order using Function module /BAPI

    hi,
    How to create Billing Plan in sales order using Function module /BAPI
    i hv check few FM such
    BILLING_SCHEDULE_READ
    BILLING_SCHEDULE_GET_NUMBER
    BILLING_SCHEDULE_SAVE
    But unable to create billing plan for a sales order.....any other method to create???

    Hi,
    Use this link.
    Create sales order with billing plan via LSMW and BAPI BUS2032
    BAPI or Function to update Billing Plan in Sales Order Items
    Hope this will help you.
    Regards,
    Vijay

  • How to creat deadlock for the purchase order in SAP Workflow

    How to creat deadlock for the purchase order in SAP Workflow

    Hi Ben,
    Are you using FM "CONVERT_DATE_TO_EXTERNAL" before passing delivery date?  If not, use FM like this, before passing the date to BAPI_PO_CREATE1 and it might work
      DATA: vf_doc_date(10),
                 internal_date TYPE d.
         vf_doc_date = sy-datum.              "Document date.
         internal_date = vf_doc_date.
      CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
        EXPORTING
          date_internal            = internal_date
        IMPORTING
          date_external            = vf_doc_date
        EXCEPTIONS
          date_internal_is_invalid = 1
          OTHERS                   = 2.
    Regards,
    Vivek

  • How to create Handling Unit using Process Order no. & Packing Instruction

    Hi experts,
    Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
    ANY FUNCTION MODULE OR BAPI TO DO THIS.
    if any solution please explain with proper example..
    Thanks In advance
    Thanks,
    Yogesh

    Hi experts,
    Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
    ANY FUNCTION MODULE OR BAPI TO DO THIS.
    if any solution please explain with proper example..
    Thanks In advance
    Thanks,
    Yogesh

  • How to  create PR automatically by sales order?

    Dear experts,
    I want to create PR automatically with sales order, and then create delivery from this sales order, and goods issue. I know third party order, however it can't create delivery.
    thanks
    Lance

    Hi,
    Go to VOV7 T code,
    You will find one check box Create PO automatic. Check that.
    It will create automatically PO.
    Hope this will help.
    Reward Point if helpful.
    Thanks,
    Raja

  • How to create the relationship between ESSBASE 11 and DM in OBIEE11

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok.
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create the relationship between ESSBASE 11 and DM  in OBIEE 11G?

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create a table with datatype blob and insert a pdf file (ravi)

    how to create a table with datatype blob and insert a pdf file,
    give me the explain asap
    1.create the table?
    2.insert the pdffiles into tables?
    3.how to view the files?
    Thanks & Regards
    ravikumar.k
    Edited by: 895044 on Dec 5, 2011 2:55 AM

    895044 wrote:
    how to create a table with datatype blob and insert a pdf file,
    give me the explain asapPerhaps you should read...
    {message:id=9360002}
    especially point 2.
    We're not just sitting here waiting to answer your question as quickly as possible for you.

  • How to create the Business System both sender and receiver in SAP XI / PI

    Dear All
    kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
    Regards
    Blue

    Hi,
      If by any chance you are not able to find these....
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
    http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
    Regds,
    Pinangshuk.

  • How to create a transport request with query and only with its structure.

    HI guru,
                how to create a transport request with query and only with its structure.transport request should not  include any other query items like ( variables, conditions...etc)
    thanks in advance.
    venkata

    Hi,
    Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
    Regards,
    anil

  • How to create a matrix with constant values and multiply it with the output of adc

    How to create a matrix with constant values and multiply it with the output of adc 

    nitinkajay wrote:
    How to create a matrix with constant values and multiply it with the output of adc 
    Place array constant on diagram, drag a double to it, r-click "add dimension". There, a constant 2D double array, a matrix.
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • How to create a hierarchy in Regional Structure and how to use it

    Hi,
    Please guide me how to create a Political Region Structure hierarchy and how to use it.
    Thanks and Regards

    Hi,
    Thanks for reply please.
    I request you to please copy paste all the possible information here. It will be a great help.
    I hope you understand why we can not provide our id on this forum.
    Please guide.
    Thanks and Regards
    Edited by: MP Vashishth on May 18, 2009 7:14 AM

  • How to create 2D array with 3 rows and unlimit column?

    how to create 2D array with 3 rows and unlimit column?

    Here are images of what I described in my previous post
    Message Edited by JoeLabView on 11-14-2007 07:56 AM
    Attachments:
    2D-array_code.PNG ‏7 KB
    2D-array_values.PNG ‏13 KB

Maybe you are looking for

  • I need help with event structure. I am trying to feed the index of the array, the index can vary from 0 to 7. Based on the logic ouput of a comparison, the index buffer should increment ?

    I need help with event structure. I am trying to feed the index of the array, the index number can vary from 0 to 7. Based on the logic ouput of a comparison, the index buffer should increment or decrement every time the output of comparsion changes(

  • Customer Statement - Page Numbers

    Has anyone been able to solve the page numbering problem on the statement report? For example: If you have page numbers visible, the report runs each page 1,2,3,4 etc, where we need to have 1st customer page 1, 2nd customer page 1 and page 2, 3rd cus

  • Correct Use of Boot Command

    I was wondering what is the correct way to use the boot command. If an image is installed on every switch in the stack, should each switch load it's own image or just the Masters image? Or, does it really matter if they are really the same image. But

  • MacBook Pro Spontaneous Shut Down

    I have a macbook pro 7.1 and I have recently started to notice that the battery does not last as much as it used to (I could stay like 6-7 hours without recharging and recently only last for less than 2). I couldn't really tell how sudden was this ch

  • 2.1 Download

    I keep on trying to download it, and it is going slow as usual, but every time I try to download it an error message pops up saying "The network connection was timed out." It is telling me to make sure my network settings are correct and so forth...