How to create stock option

Hi all
I am looking for steps for creating stock options
Any info. will be very appreciated
Thanks in advance

Hi,
You can either use ICD (Individual compensation distribution) or CWB for this. Do you have any licensing issues for either choice ?

Similar Messages

How to create select-options in module pool program

Hi
i am structed at this point could you please tell me
how to create select-options in module pool program

Steps to get SELECT-OPTIONS in module pool programs.
<li>. Start one dialog program with SAPZ_TEST.
<li>. Place the below code in the TOP include of the dialog program.
PROGRAM SAPMZ_TEST.
TABLES mara.
SELECTION-SCREEN BEGIN OF SCREEN 2100 AS SUBSCREEN.
SELECT-OPTIONS: matnr FOR mara-matnr.
SELECTION-SCREEN END OF SCREEN 2100.
<li>. Create one screen 2000 .
<li>. Go to Layout of the screen and Define subscreen area on the screen and Name it as g_subscreen.
<li>. Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN g_subscreen INCLUDING 'SAPMZ_TEST' '2100'.
PROCESS AFTER INPUT.
CALL SUBSCREEN g_subscreen.
<li>. Activate all.
<li>. Create Transaction code for the dialog program SAPZ_TEST.
<li>. Execute the transaction code. You will see the select-option like we see on Selection-screen.
I hope that it gets u clear idea.
Thanks
Venkat.O

How to creat select-option on module pool screen???

Hi All,
please tell me how to creat select-option on module pool screen???
Regards
Deepak

Hi Deepak Kumar Sharma,
There are Two ways to achieve it...
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Also have a look on below threads
how to make select option in module pool
select option in module pool program
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

How to create stock in Make to order and make to stock segments?

Hi,
Could u please tell me how How to create stock in Make to order and make to stock segments?
Regards,
AS

Hi,
If you are processing production order, use tcode MB31with mvt type 101, system will create stock. This method is same for both make to order and make to stock scenarios.
For initial stock upload you can use 501 or 561 mvt for make to stock and for Make to order use same mvt typt with special indicator E.
Regards,
Dharma

How to create select-options in my own screen?

Hi
I create my screen and i wish to place select-options on screen. how to do that?

There is no SAP standard way of creating select options on screen.However you can create your own select options by providing two fields on screen in which maximum and minimum values can be entered.
screen fields :
input1 : <minimum value>
input2 : <maximum value>
data :
range for <some field>
then you can fill a range with these values.For eg.
range-low = <low value input field>.
range-sign = 'I'.
range-option = 'BT'.
range-high = <high value input field>.
append range.
*Now write your select statement.
select * from <some table> where <field> in <range>

How to create select-options for 3 fields out of 5 by FREE_SELECTIONS_INIT

Hi Experts,
I am using the Function Modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG to create the select-options dynamically on the selection screen.
My problem is that I am passing a field list of 10 fields in the FIELDS_TAB of the function.
Now it creates the select-options for all 10 fields. I want to create select-options for only 5 fields initially and let the user select out of the remaining 5 fields to create the select-options.
How to achieve this.?
I tried by passing the 5 fields in FIELDS_NOT_SELECTED table but they get hidden and once hidden I am not able to get them back in my field list.
Please help me out.
Useful answers will be suitably rewarded.
Thanks in advance.
Regards,
Himanshu

Hi Experts,
I am using the Function Modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG to create the select-options dynamically on the selection screen.
My problem is that I am passing a field list of 10 fields in the FIELDS_TAB of the function.
Now it creates the select-options for all 10 fields. I want to create select-options for only 5 fields initially and let the user select out of the remaining 5 fields to create the select-options.
How to achieve this.?
I tried by passing the 5 fields in FIELDS_NOT_SELECTED table but they get hidden and once hidden I am not able to get them back in my field list.
Please help me out.
Useful answers will be suitably rewarded.
Thanks in advance.
Regards,
Himanshu

How to create SELECT-OPTION in search help (search) field

Hi All,
We have created a search help using Help view as selection method.
But, we want to have a SELECT-OPTION for one of the search parameters. How do we implement the same ?
Regards,
Ashish

hi
try this
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
    TABNAME                   = 'YRJEMPDETAIL'
    FIELDNAME                 = 'L_NAME_LOW'
*   SEARCHHELP                = ' '
*   SHLPPARAM                 = ' '
   DYNPPROG                  = 'SAPMZRJ_HELP'
   DYNPNR                    = '9000'
   DYNPROFIELD               = 'LAST_NAME_LOW'
*   STEPL                     = 0
*   VALUE                     = ' '
*   MULTIPLE_CHOICE           = ' '
*   DISPLAY                   = ' '
*   SUPPRESS_RECORDLIST       = ' '
*   CALLBACK_PROGRAM          = ' '
*   CALLBACK_FORM             = ' '
*   SELECTION_SCREEN          = ' '
* IMPORTING
*   USER_RESET                =
* TABLES
*   RETURN_TAB                =
* EXCEPTIONS
*   FIELD_NOT_FOUND           = 1
*   NO_HELP_FOR_FIELD         = 2
*   INCONSISTENT_HELP         = 3
*   NO_VALUES_FOUND           = 4
*   OTHERS                    = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
    TABNAME                   = 'YRJEMPDETAIL'
    FIELDNAME                 = 'L_NAME_HIGH'
*   SEARCHHELP                = ' '
*   SHLPPARAM                 = ' '
   DYNPPROG                  = 'SAPMZRJ_HELP'
   DYNPNR                    = '9000'
   DYNPROFIELD               = 'LAST_NAME_HIGH'
*   STEPL                     = 0
*   VALUE                     = ' '
*   MULTIPLE_CHOICE           = ' '
*   DISPLAY                   = ' '
*   SUPPRESS_RECORDLIST       = ' '
*   CALLBACK_PROGRAM          = ' '
*   CALLBACK_FORM             = ' '
*   SELECTION_SCREEN          = ' '
* IMPORTING
*   USER_RESET                =
* TABLES
*   RETURN_TAB                =
* EXCEPTIONS
*   FIELD_NOT_FOUND           = 1
*   NO_HELP_FOR_FIELD         = 2
*   INCONSISTENT_HELP         = 3
*   NO_VALUES_FOUND           = 4
*   OTHERS                    = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
hope this helps
Regards
Ritesh J

How to create an optional parameter in ssrs report

I have a report where I want to give the report user the option of entering a phone number as a filter if they want to pull data only for a particular phone number or pull the report without entering a phone number as a parameter, thus disregarding
the use of the filter. I have parameter for the phone number that shows as a text box where the report user can enter the number then click to run the report. A filter on the data set that uses the phone number parameter as the
value. It works fine when I enter a phone number (it returns the row associated with the phone number entered. However when I do not enter a phone number, no rows are returned. How can I get all rows to be retuned when
I do not enter a value for the parameter?
M Collier

Hello,
Did you specify the DefaultValue or ValidValue of the parameter 'parameter name1' by get values from another parameter or itself?
If there is another parameter or
cascading parameters , the error may caused by the order of parameters. When preview report, the order of the parameters in the Report Data pane determines the order in which the parameter queries appear in the report. Please verify the order
of the cascading parameters.
Whats's more, please also check the parameters name and the acceptable values of the parameters.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

How to create a optional filter condition in Universe

Dear All
I am using BI 4.1 ( .Unv ) , we need to add a optional condition in Universe. I tried different ways to do it, but unable to do it correctly.
In one of my approach, I created a report and put a optional prompt there then edited the SQL and copied that prompt condition and pasted that into a Universe condition. Then I used this filter into a report when i ran the report without selecting any value into the prompt it was throwing an error.
Please suggest if there is any way by which we can do this.
BO should have this functionality for better end user experience.
Thanks,
Mayur

Hi Bill,
Yes we are still using .unv as the universe we have is created in 2008 and since then we been migrating this through different versions.
What I meant is a Filter which is created in the Universe and which has ability to act like a report level optional filter ..means if you select any value then it will fetch data for that selection else it will give data for all LOVs
Yes BO has optional prompt functionality only for report level filter .. I mean when you pull a dimension into filter panel and select its value equal to prompt and in prompt properties you check mark the Optional Prompt option.
The requirement is to create a Universe level filter which when used into a report then it should should have this optional prompt functionality. either users can run report with setting some value or without selecting anything.
Thanks

How to create select options

Hi,
Please guide me to implement select options in webdynpro.
Regards,
Ratheesh BS

Hi Ratheesh,
Sorry for the late reply. The m_handler is just a normal reference variable of type if_wd_select_options. Within the WDDOINIT methos you would be calling the interface controller method init_selection_screen to get the helper class. You just need to use this reference for calling the method set_global_options with your desired criteria. Just try go through the sample code fragment below:
METHOD wddoinit .
DATA: lr_select_options TYPE REF TO iwci_wdr_select_options.
DATA lr_helper TYPE REF TO if_wd_select_options.
DATA: lt_range TYPE REF TO data.
DATA: lr_comp_usage TYPE REF TO if_wd_component_usage.
" This code is to instantiate the component WDR_SELECT_OPTIONS
lr_comp_usage = wd_this->wd_cpuse_select_options( ).
IF lr_comp_usage->has_active_component( ) IS INITIAL.
    lr_comp_usage->create_component( ).
ENDIF.
" call the interface controller method init_selection_screen to get the helper class
lr_select_options = wd_this->wd_cpifc_select_options( ).
" You are getting the necessary reference to the component into lr_helper here
lr_helper = lr_select_options->init_selection_screen( ).
" Use the helper class to create a range table for the data element S_CARR_ID
lt_range = lr_helper->create_range_table( i_typename = 'S_CARR_ID' ).
" Add a Selection Screen Field
lr_helper->add_selection_field( i_id   = 'S_CARR_ID'
                               it_result = lt_range ).
" Removing the Cancel button from the toolbar displayed
lr_helper->set_global_options( i_display_btn_cancel = abap_false
                                  i_display_btn_check   = abap_true
                                  i_display_btn_reset   = abap_true
                                  i_display_btn_execute = abap_true ).
ENDMETHOD.
Hope this helps resolve your problem.
Regards,
Uday

How to create an optional indexed prompt?

Hi,
We are using WEBI 3.1. We are trying to create the following pre-defined filter prompt in the universe but does not work. Has anyone successfully built a WEBI report leveraging an indexed optional object used as a prompt?
For example:
@Select(Employee Class\Employee ID) in @Prompt('Select Employee:','A','Employee Class\Employee Name',Multi,primary_key,Persistent,,User:0,optional)
If I create at the report level, the indexed Primary_Key is not pulling in for some reason. It does not pull in the ID. It ends up doing a Employee ID IN ('Name of Employee1', 'Name of Employee2') instead??
Thanks in advance!

Hi,
Should work, though I never used the user:0 thing in universe definitions, just extra comma's
Did you check the index in the employee name object, is it defined, parses, enabled?
If you do a simple condition on the employee name object, does it translate to this index?
Easy to check by checking the SQL before running the query.
Making it optional in the query panel, does it still work?
If you do a multiple without optional, does it still work?
Making this optional in the query panel, does it still work?
Look at the SQL generated, is it different from what you use?
(I currently get
Outlet_Lookup.Shop_id =
@prompt('Enter Store name:','A','Store\Store name',Mono,Constrained_key,Persistent,,User:0,KEY_'N',optional)
in WebI where I also used to have primary_key.
It may be a version difference, or the fact that it is side by side with BI40,
but it may also hold a clue as to why it doesn't work.)
Hope you can find what is wrong...
Good luck,
Marianne

How to create select-options on module pool screen

Hi all
I want get a range of values from the user from the module pool screen.
Is there any element available on module pool screen like select options on the selection screen of reports.
reply me ASAS.
Thanks.

hi krishna
actually I want to display the details of PO numbers from 45000100 to 45000150. user will enter this range on the module pool screen just as we enter on the selection screen of report. My question is do we have a button like select-option on the module pool screen.
Plz . reply me ASAP.
Thanks.

How to create resolution(High, medium, low) options?

I have no clue how to create resolution options for a partially finished game, so what do you guys suggest i do?

Constant
Defined By
BEST : String = "best"[static] Specifies very high rendering quality: graphics are anti-aliased using a 4 x 4 pixel grid and bitmaps are always smoothed.
StageQuality
HIGH : String = "high"[static] Specifies high rendering quality: graphics are anti-aliased using a 4 x 4 pixel grid, and bitmaps are smoothed if the movie is static.
StageQuality
LOW : String = "low"[static] Specifies low rendering quality: graphics are not anti-aliased, and bitmaps are not smoothed.
StageQuality
MEDIUM : String = "medium"[static] Specifies medium rendering quality: graphics are anti-aliased using a 2 x 2 pixel grid, but bitmaps are not smoothed.
StageQuality

BAPI's for Transaction Manager: Is there any BAPI for Stock Options

Hi gurus,
We are using almost every BAPI for Transaction Manager module at FSCM-Treasury & Risk Management (ECC 6.0).
We have forex swaps, forex forwards, forex spot deals, interest rate swaps, cross currency swaps, equity swaps, and we also have a stock options plan.
We need to use a BAPI to automatically create stock options, importing data from other stock options alreaedy created (manually, by the user) in the system.
Do you know if there is any specific functionality for this?
Thanks in advance and kind regards.
Borja

Hi Borja,
if I understand you correct then you want to create a stock option like you can do it manually with the transaction FWZZ. Try the BAPI BAPI_FP_CREATEFROMDATA. With this function module it is possible to create different types of securities like listed options or futures too.
Regards
Robert

How to create STPR(Stock Trasnsfer Pruchase Req) in MRP Run

Hello PP Guru ,
I am running MRP in various branch-plant .I maintained Special Procurement Key 40 for all the material in branch-plant .Here we have one supply plant .We run MRP at Supply plant once all our other branches(plant) completes their MRP run .My requirement is
1.How to create STPR/STPO while running MRP at branches ? I did not find any option in MD01 to create STPR/STPO while executing MRP at plant level.Is there any configuration seting required?
2.How to create PR/PO in Supplying plant (Central plant) so that it will consider all the branches STPR/STPO and show List of PR in MD04 ?
Thanks and regards
Jia

Hi Jia,
Yes, there is some special setup for Stock Transport orders. There are some business decisions you must make first. Pls refer to [Stock transport orders|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm] for basic functionality in helping you to make your decisions.
For configuration settings, refer to
[Purchasing IMG|http://help.sap.com/saphelp_46c/helpdata/en/32/72369adc56d11195100060b03c6b76/frameset.htm] then Purchase Order>Set up Stock Transport order.
and
[Purchasing IMG|http://help.sap.com/saphelp_46c/helpdata/en/32/72369adc56d11195100060b03c6b76/frameset.htm] then Purchase Requisition>Set up Stock transport Requisition.
These steps can be reached in IMG>MM>Purchasing>Purchase order>Set up Stock transport order, and
IMG>MM>Purchasing>Purchase Req>set up Stock transport requisition.
For question 2, there is no special setup. Once your STOs/STRs are properly set up, you will see new requirements in your central plant, which represent the un-fulfilled requirements from the branch plants. Assuming that you already have set up MRP in the central plant, MRP will create new proposals (pureqs or plndords) just as if all of these new requirements were new sales orders.
Rgds,
DB49

How to create stock option

Similar Messages

Maybe you are looking for