How to create stop/start effect for tilt/shift

Hi I was wondering how to get the animated look I have seen with tilt/shift videos. I want to record my scenes using my Canon 5D Mk2 in video mode rather than use time lapse and increase my shutter count. So after I have shot my video with my Tilt/shift lens I want to create the jittered video effect in FCP, any help would be appreciated. Many thanks in advance.
Steve

you can maybe have a play with the Video Filters > Video > Strobe effect, see if that gets you where you want to go

Similar Messages

How to create new starting conditions for a workflow of shopping cart

Hi all,
How to create new starting conditions for a workflow of shopping cart
SATYA

Excecute SWB_COND
Creating New:
Click on Create button. If you cannot see that it could be a authorization issue
then Business Object: BUS2121
Double Click the event linkage for one step workflow
Define the expressions, Check Consistency and click on Traansfer
Start Condition is created. If it is not Active click on the Red Button to make it Active
Editing Already existing:
Click on Edit Button If you cannot see that it could be a authorization issue
then select Business Object: BUS2121
Click on the condition part (White area) of the start condtion needing editing
Change the expressions, Check Consistency) and click on Traansfer.If it is not Active click on the Red Button to make it Active

How to create a special effect for 'wipe' and 'wheel'

New to Captivate. Recently purchased Captivate 7. I'm trying to obtain an object 'add effect' similar to the "wipe" (from left) and the "wheel" animation effects found in PowerPoint. I want to simulate hand-drawing an emphasis line under text. I have a .png graphic of a hand-drawn red line (transparent background) that I'd like to appear by "wiping" from left to right. The "stretch" effect (from left to right) found in Captivate's "Add Effect" doesn't look right; it's obviously a 'stretch' instead of a 'wipe'. Likewise, I would like to hand-draw a circle or oval around certain text or other objects to draw attention to these items. The "wheel" animation in PowerPoint works perfectly for this.
Is there a way to do this in Captivate? Maybe some variation of one of the built-in effects that I've missed? Camtasia Studio has "sketch motion graphics" built in - which also does this nicely.

Thanks for the info on Infosemantics and their widgets. As a Newbie I wasn't aware of them and their cool, useful products. However, after going through all the tutorials I couldn't figure out how the 'slider' widget would serve my need to simulate a hand-drawn line, from left to right, under text on a Captivate 7 slide. Yes, it can be used to animate (or move) any object, but not to "reveal" an object like the "wipe" animation in other programs.
I'm thinking now that it would be easier to just build an animated GIF or a small flash file to show a hand-drawn red line moving from left to right. I have Flash CS4 but have never used it. Something else new to learn.
Thanks again.

How to create a "Pressed" effect for WPF Button?

Hi,
I've been searching for quite sometime but I'm not able to find a way to give a "Pressed" effect to a button when it is clicked, a la "Popup" style in C#.
Could someone help me in this regard?
Currently I'm using the following code for setting up a circular button.
<Button x:Name="btnNew" Content="Delivery Note" HorizontalAlignment="Left" Margin="512,147,0,0" VerticalAlignment="Top" Width="63" Height="63" BorderThickness="0" Click="Button_Click_1"
Cursor="Hand" Padding="1,1,1,1" UseLayoutRounding="True" >
<Button.Effect>
<DropShadowEffect ShadowDepth="2" />
</Button.Effect>
<Button.Template>
<ControlTemplate TargetType="Button">
<Grid>
<Ellipse Stroke="Black">
<Ellipse.Fill>
<ImageBrush ImageSource="Images/Delivery.png">
</ImageBrush>
</Ellipse.Fill>
</Ellipse>
</Grid>
</ControlTemplate>
</Button.Template>
</Button>
Thanks

Not a popup control.
In Visual Studio 2008, in Button properties there is a property called "FlatStyle" in which there is an option "Popup". The button gives a click effect when an user clicks on it. Currently that button effect is not there in the Wpf button
that I am trying to create.
Thanks.
This isn't explicit enough.
In windows forms there is a popup effect on the flatstyle enumeration.
https://msdn.microsoft.com/en-us/library/system.windows.forms.flatstyle(v=vs.110).aspx
Is that what you mean?
It says
A control appears flat until the mouse pointer moves over it, at which point it appears three-dimensional.
But that is mouse over rather than clicked,
Could you please describe what you mean?
You want it to look like what before it;s clicked and what after it's clicked?
And is mouse over involved or not?
In WPF there is something called a toggle button.
You click and it sets IsChecked = true.
Click again and it sets IsChecked = False.
You could use that to drive a trigger and that trigger could do something to the look of the button.
There is also visual states you could use.
https://msdn.microsoft.com/en-us/library/cc296245(v=vs.95).aspx
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to create the Access sequence for the Vendor+material+plant combination

Hi all
Please let me know How to create the Access sequence for the Vendormaterialplant combination..
Whats the use? What its effect in purhcase and taxe..
brief me please

Hi,
you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
find the tax condition type. see in it which access sequence is attached.
if there is none then use JTAX used for taxes in India.
or you can create the similar one for your.
to create the same goto OBQ2.
new entry or copy JTAX.
and assign the access sequence to condition type.
this will resolve your problem if you just need to assign the access sequence.
regards,
Adwait Bachuwar

How to create a transaction code for a function group with screen 100 as st

Hello ,
I have requirement where I need to create a function group and create screen 100, 200, 300 and include the function in the screens.
Customer asked me to create a transaction with the screen 100 as the starting screen.
Can you please let me know how to create a transaction code for a function group with screen 100 as starting screen.
[ It is not a module pool program ].
Thanks
Prashanth.
Moderator message - Please ask a specific question and do not ask the forum to do your work for you - post locked
Edited by: Rob Burbank on Jun 2, 2009 11:49 AM

Go to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
Name of screen field:                               Value
D_SREPOVARI-REPORTTYPE                RW
D_SREPOVARI-REPORT                        ZPCA
Save and transport accordingly.

Need document on how to create write back template for 11g

Can anybody provide documentation on how to create write back template for OBIEE 11g?
Thanks

Can anybody provide documentation on how to create write back template for OBIEE 11g?Yes! Oracle does. How about you start by reading it? I will give a hint, it's on the System's Administration guide.

How do I Stop 'Start up Chime' on OSx 10.8.5

How do I Stop 'Start up Chime' on OSx 10.8.5
I used to have it disabled on previous mac systems fine.
I want system sounds to still hear email alerts and facetime calls, but stop the annoying loud startup chime.
Any suggestions please. (startninka app didnt work!!)
Andy
OSX 10.8.5

CHIME CRIME update
no luck as yet! Working at home office and early starts are awful with the Chime so loud!!!!
I tired the adding programme to Terminal...did not work.
Also 'Chime Stopper'- (yet to test) https://www.macupdate.com/app/mac/13170/startup-chime-stopper
But...
I found last night the 'Startup Pref Pane' in System Prefs... this should stop the 'Chime Crime'
so i can only test this and see what happens
This could be the answer for OSX 10.8.5....
Will update you all if it works

How can I stop being harrased for keychain passwords

How can I stop being harassed for keychain passwords? All my key chain passwords and my login are the same. I am asked for address book, calendar, safari, mail, iMessage, just to name a few.

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ First Aid
There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

How to create a new template for pages in iPad?

How to create a new template for pages in iPad?

In spite of the latest updates Pages for iPad does not support:
1) User templates
2) Headers
3) Footers
4) Page numbers
and it is not compatible with Pages for OSX, a document cannot be edited alternatively on Mac and iPad without destroying headers and footers.
- The Word export is far from perfect
- Does not really support Page Layout mode (you cannot duplicate a page at least)
- Does not have a multi-page overview
- The spelling support of iOS and OSX is at the level of Apple Maps except 4-5 languages.
- It takes a long time until it starts
INSTEAD, according to the latest updates:
- It can do change tracking
- Lock and unlock objects
- Add reflections to shapes
Dear Apple, please understand:
- We like iPad and we wish to use it for real work.
- We wish to have user templates, headers, footers and page numbers.
- We do not expect all the features of Pages for OSX, but we do expect real compatibility.
- We do not wish to switch back to Word for Windows unless you force us.
Please try to concentrate on real development not on unimportant changes like in the latest dissapointing update.

How to create a private network for OCFS2 in OVS 2.2.1

Does anyone know how to create a separate netwok for ocfs2 and leave the regular vm traffic on the main network.
I have done the following
- configured 3 vm servers connected fia fibre channel to a SAN
- Bonded 2 network cards on each server to provide 1 bridge on each. (172 network)
- Installed a 3rd network card in each server and configured on a 10 network with a separate switch.
so my servers are called bart, lisa, flanders
I can communicate between them effectively and the VM manager on a different server can talk to them all.
I have also configured entries for bart2, lisa2, flanders2
which are on the 10 network. I can ping and talk between these successfully.
I can't however configure the cluster.conf to use the bart2, lisa2, flanders2 as it has a problem with the names not matching the local name of the machine.
Im not sure if changing the server name will affect the VM agent.

Basically, Oracle VM uses the IP address you specify when adding the Oracle VM server to configure OCFS2 and Live
Migration. So you should use the private ip when adding the server.
Then, the "regular" VM guests network traffic will be on the network/bridge/bond the guest itself belongs to.
Maybe this old thread would be interesting for you to read:
Live Migration and private network
HTH

How to create a RFC destination for extracting data to HANA

Hello All,
Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

Hi Venkatesh,
In SM59 t.code we create RFC destinations.
Go thru the video link for creating RFC destinations step by step
How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

How to create a daily report for sales order

hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji

How to create an address code for PO delivery address?

Hi Guys,
How to create an address code for the delivery address in the purchase order? Please explain me with details.....
Thanks
Raja

delivery adress records can be created with transaction MEAN.
the number is purely internal.
In ME21N you can then search by name (you will certainly not know the number)

How to create stop/start effect for tilt/shift

Similar Messages

Maybe you are looking for