How to create Subscreens more than 2.

Hi All,
My requirement is to create more than 2 subscreens .
By default we can create two subscreens in Screen Painter.
I need to create 10 subscreens in screen, will anybody help me how to create
subscreens
Regards,
Madhavi

Hi,
We can create any number of subscreens.First define number of tabs for each subscreens.We can create any number of tabs using tabstrips.Under each tab provide subscreen area and later design subscreen and call that subscreen in flowlogic.
Reward if useful.
Regards,
Swetha.

Similar Messages

How do I use more than 1 song in a slideshow

Now that iPhoto is back and running, thanks to Terence Devlin, how do I put more than one song to a slide show? So far, I can only figure out how to put one in (from iTunes). Ideally, I would like to phase out in the middle of one song and splice into another...I know the answer is out there Thanks

You can choose a playlist, rather than one song. You may need to look for the little dimple in order to see your playlists in the window. Have a look at this thread and click on lori's helpful screenshots for detailed instructions.
To have one song fade out in the middle and transition into another song you can create your compilation in Garageband. Launch Garageband and drag the first song into the track area of the main window. You can keep dragging songs in, placing them in the same track. You can shorten a song, fade it out where you want it to fade, and fade in to the next song. Save it to iTunes, where it will be a new "song". Select that for your slideshow.

How can I select more than one song from the search results?

I want to create playlists based on certain words in the song title. For example, I may want to create a playlist of all my songs with LOVE in the title.
Doing the search is easy, but I can't select more than one song at a time. Is there any way in iTunes 12 for Windows to do this? I found an answer in iTunes for Mac, and it basically says to "un-check "Search Entire Library." " but I don't see that option in iTunes for Windows.
Here is the link to that question: how can i select more than one song from drop down search bar
I hope some Windows user can help me out.

Found the "Search Entire Library" option - click on the small (VERY small for my eyesight) down arrow next to the magnifying glass. Also need to select "Filter by: Songs", and then the songs in the main window show the results.
I'm going to leave this up on the board because 1) in case someone else has this question, and 2) I don't know how to delete it anyway.

How can I maintain more than one contact person for a supplier

Hi
As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
we are in SRM 7, and currently we are creating contact person throug customised BDC.
please advice.
Thanks & Regards
NITIN
Edited by: nitinkk on Sep 9, 2011 10:22 AM

Dear Yaniv,
Thanks for your information,
I am able to create users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
Thanks & Regard
NITIN

How can I define more than one baseline in a line chart??

How can I add more than one straight line across a graph to indicate a target value? The values are percentages.
Thanks a lot!!!

When I have needed to indicate a target line on a chart, I have written a formula that would return a negative or positive number for each group. Then when I chart on the formula, it creates a baseline, with those groups beating the target above the baseline, and those failing to meat the target below the baseline. Percentage calculations work well on these types of charts.

How can we assign more than one request group to a responsibility?

Hi
Can anyone tell me how we can assign more than one request group to a responsibility?
Thanks
SS

Hi SS,
Its not possible, rather you should create a combination of Requests/RequestSets and create a new Request Group.
Regards,
Kiran

How I can view more than 1 page at once on my screen with "PAGES" 5.5.2?

Hello, I have a iMac 27" and would like to know how I can view more than 1 page at once on my screen with "PAGES" 5.5.2?
In the past one could do this by clicking in the "zoom" field on "PAGES", but ever since Apple have seemed to "simplify" PAGES.... well, I'm spending more time searching than working...
Can anyone help? I'm going nuts with this issue.
Thanks.

Hi viking.
Just to keep you informed, it's the least I can do after the time you spent helping me.
The best solution I have found and it works excellently is the following:
- I installed VMWare on my iMac.
- Created a virtual machine and installed OS X7.0 on it.
- I "imported" or reformatted this virtual machine with an image disc (a DMG) of my entire système installed on my previous Mac (which was running OS X7.5 and had iWorks installed on it)
The result is fantastic.
I now have a virtual machine running Mac OS X.7.5 on my iMac (which is running Yosemite). As, I also managed to import into this virtual machine my image disk (DMG) of my entire MacBook Air (which had MacOS X7.5 and had all apps including iWorks) I can use Iwork just like in the "good old days" !!!
So I now simply jump from one to the other, its perfect!
Thank you very much for the time you spent helping.
Have a great day.

How do I order more than one book at a time?

I created 10 photo books I would like to order, but when I go to place my order I can only place one book at a time. I do not want to place 10 different orders. How do I order more than one book at a time?

You can't. Only multiples of the same book can be ordered at a time. Each individiual book must be ordered separately.
OT

How do I edit more than 1 photo at a time?

How do I edit more than 1 photo at a time using the same editing actions. For example: selecting 50 photos and pushing the fix red-eye button to fix all 50. Specifically I usually enhance, fix red eye and then vinette my pictures then create a slideshow. With thousands of pictures this is becoming impossible to do 1 at a time....

http://www.feroxsoft.com/ibe/index.php.en
- though I don't know that you can fix redeye like that...

How do I share more than one file at once in Adobe Creative Cloud?

How do I share more than one file at once in Adobe Creative Cloud?

Hi Ken,
Thank you for your quick response. Have a good weekend.
With best regards,
Hans Rengelink
De Eelinkes 29 - 7101 PZ Winterswijk - The Netherlands - Tel: +31 543 461818 - E-mail: [email protected]
This e-mail message and any accompanying documentation is intended for addressee only and may contain privileged and confidential information. If you are not the addressee any use of this information is strictly prohibited. If you have received this e-mail in error please notify us immediately by reply e.mail or telephone call on +31 543 461818 and delete this e-mail from your systems.
Op 26 okt. 2012, om 17:33 heeft Ken G. Rice <[email protected]> het volgende geschreven:
Re: How do I share more than one file at once in Adobe Creative Cloud?
created by Ken G. Rice in Adobe Creative Cloud - View the full discussion
Currently you cannot share a folder, only individual files. Sharing of folders is a feature that is coming in the future.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4802876#4802876
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4802876#4802876
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4802876#4802876. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do I add more than one video per track/layer?

Hi.
Could someone please advise me how I can add more than one video to a track/layer?
I'm cutting and pasting parts and each time I paste, a new track/layer is added.
The final video is going to be approximately 5 minutes long.
I am 17 seconds in and have 54 tracks already!
How do I stop this?
Thank you very much
J

More video tracks. This is actually what you want.
Unless you're just making a still image (like Photoshop), multiple layers give you control to animate each individually. (If it's just a Photoshop comp you're after, you may want to create it in Photoshop)
If you want to move ALL OF THE VIDEO TRACKS TOGETHER, you can use
parenting or
precompose those individual layers into a single composition.
livedocs

How do I add more than 4 virtual disks to a client

Playing around with OVS 3.3.1, just trying to learn.
When I create a new Virtual host with OVM I can create up to 4 disks. (using the create new not clone or template)
How do I add more than those 4 presented in the gui?
- Roland

It depends… if you're creating a HVM guest than there're only 4 slots available for virtual drives. However, if you are creating a PVM guest, than there're 100+ slots available.
In case you're creating a HVM guest, you could also mess with the vm.cfg, but I'd stringly advise against that as any change that you do to the guest trhough OVMM is likely to overwrite you manually inserted settings.
Cheers,
budy

How do I combine more than 12 files into one PDF file?

How do I combine more than 12 files into a single PDF? That's why I upgraded to Adobe XI Pro.

Hi Marshall32,
If you have Acrobat Pro, you can combine more than 12 files by choosing File > Create > Combine Files into a Single PDF. The 12 file limitation is only imposed by Adobe PDF Pack online service. Acrobat itself doesn't have such a limit.
(If you haven't already, you can download Acrobat from here: https://cloud.acrobat.com/acrobat.)
Best,
Sara

How do you have more than 1 ipod in your family and only 1 computer to be able to each have a separate account?

HOw do you have more than 1 ipod int he family and be able to have your own itunes on 1 computer?

Did you read the support document at the other end of the link? What additional information do you desire?
The Apple support document How to use multiple iPods with one computer (n.b. same link as above!) suggests a number of ways for managing the media content. I use method two (Sync with selected playlists) with a slight twist. Rather than regular playlists I set the grouping field to indicate which users should receive which tracks and create smart playlists based on the content of this field.
e.g.
"Alice's Tracks" is "Grouping contains Alice" + "Kind contains audio"
"Bob's Videos" is "Grouping contains Bob" + "Kind does not contain audio"
Tracks that both Alice & Bob want on their iPods have the grouping set to "Alice/Bob"
etc.
I currently manage our family's five iDevices using this system, each getting a different selection to suit their tastes and the capacity of their device. An advantage of using the grouping field is that it is stored in file tags (for non-wav audio files anyway) so that it is relatively easy to recreate the playlists should the iTunes library get trashed and need rebuilding. Also useful if you move files about manually as playlist membership is preserved when you delete & re-import the tracks.
tt2

Intercompany sale - how can i assign , more than 1 sales org of diff compan

Hi,
I have
comp1 - Sales org 1 - plant 1
comp2 - Sales org 2 - plant 2
comp3 - Sales org 3 - plant 3.
Now i want to do Intercompany sale of Sales org2 with plant 1 & Intercompany sale of sales org3 with plant 1.
For that how can i assign , more than 1 sales org of diff company codes to Plant1 ??
Does SAP allow to do intercompany sale for more than 1 diff sales orgs ??
Thanks for immediate response.
Nitin

Hi nitin,
as per your scenario,
Company code 1 orders goods through its sales organization 1 from Plant 2 belonging to Company code 2.
It is imperative that both Plants 1 & 2 should have the material. In other words, the material is created for both the Plants 1 & 2 + their respective storage locations.
Sales Organizations and Plants are uniquely assigned to Company codes. It is not possible to assign either a plant or a sales organization to more than one company code.
Sales organizations and plants assigned to each other need not belong to the same company code.
In other terms,
a plant belonging to Company code 1 & assigned to Sales Organization 1 can also be assigned to Sales Organization 2 of Company Code 2.
CONFIGURATION SETTINGS
Assign Delivery Plant of the supplying company code to Sales Org + Distribution channel of the Ordering company code in the Enterprise Structure.
DEFINE ORDER TYPES FOR INTERCOMPNY BILLING:
Menu path: IMG/ SD/Billing/Intercompany Billing/Define Order Types for Intercompany billing
Assign Organizational units by Plant:
Menu Path: IMG/ SD/Billing/Intercompany Billing/Assign Organizational units by Plant.
Define Internal Customer Number By Sales Organization:
Menu Path: IMG/ SD / Billing/ Intercompany Billing/ Define Internal Customer Number By Sales Organization:
Creating / Showing Ordering Sales Organization as Internal Customer for Supplying Company code:
Transaction Code: XD01
The ordering sales organization is represented as Internal customer of Supplying company code.
We need to create customer master in Account Group - Sold to Party and maintain minimum required financial & Sales Area data.
This internal customer number has to be assigned to the ordering sales organization. Hence, the system automatically picks up this Internal customer number whenever there is Intercompany billing.
Thanks,
Raja

How to create Subscreens more than 2.

Similar Messages

Maybe you are looking for