How to create swf with transparent backgound

I have a web site project created in Dreamweaver. On the home page I need a swf file that is transparent and will animate over the dreamweaver backgound. Does the wmode need to be coded in actionscript or is there another way of solving this.
KatyDad

The wmode parameter is set in the html code of the web page. Setting it to a value of "transparent" should make the background invisible for most browsers.

Similar Messages

How to create Icon with transparent shape inside

Hi All
I would like to create a vector icon with a transparent shape inside it, like in this image below:
So everything should be transparent except of course the dark grey area...
How Do I do that?
Below is a link to my AI file if you want it:
AI File
Thank you!

With just the book icon selected, release clipping mask. Select both items, Minus Front.
Is that what you did? What Illy version?
this is what I get, green rectangle was placed behind to see the "hole."
Mike

Creating animations with transparent backgrounds?

I'm running into some problems when using After Effects to create animations with transparent backgrounds for Keynote...
I use animated gifs and short quicktime movies with uniform backgrounds as source files, use color keying to take out the backgrounds, preview them to see if they look OK, render the results as RGB+alpha, and... they don't show up as transparent in Keynote. They work in Powerpoint, however. I've tried outputting as .mov, as .gif, as premultiplied vs straight alpha... no joy. Can someone explain (or point me to an explanation) of how Keynote differs from other programs in its handling of transparency? What am I missing?

Using a TYPE_INT_ARGB BufferedImage worked beautifully. I had played around with Image for hours, but it never occurred to me that BufferedImage would be needed. :)
many, many thanks,
Steven

How does one deal with transparency in a placed file in InDesign?

I suppose this may seem elementary, but I'm relatively new to it so here goes:
First off, my print shop says that placed images should be in EPS format. I'm creating my files in Illustrator and some of them use a gradient mask to fade an object away. When saved as an EPS, the gradient mask shows as a white box instead of fading into the background. When I copy/paste my Illustrator image into a new Photoshop file, save it as a PSD, bring that PSD into Illustrator and save it as an EPS, the whole file is in a white box.
Example. I want those aisle markers to not be in white boxes.
http://i.imgur.com/lZjtu.jpg
How does one deal with transparency in a placed image in InDesign?
Thanks.

If possible, one finds a new printer who can handle your files properly and doesn't insist on .eps.
What format are you delivering to the Printer? If it's anything other than PDF (and that's at their request) all the more reason to reread the first sentence. Why on earth are you moving things from Illustrator to Photoshop and back to Illustrator? Either one of those will save as .eps (ugh), though you need to use a clipping path for transparent areas coming out of photoshop (don't really know how Illy handles it when you say to save .eps with transparent background), but you are FAR better off with either native .AI or .PSD, both of which support transparencey, unlike .eps.If yo are delivering PDF, as you should be, it makes no difference to the printer what format the placed content uses (and it shouldn't matter to him even with native files unless he's hopelessly stuck in the 90s).
In any event, when importing from Illustrator, make sure to show the import options and check the transparent background box.

How to create complaints with reference to ECC Billing document (CRM 7.0)

Hi experts!
I use ECC 6.0 and CRM 7.0.
I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
I read the following topics and help:
1. How to create complaints with referenceto ECC Billing document
2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
Made these settings:
1. Define the Business object type
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
2. Assign Business Object Types to Transaction Types
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
but still do not know,
1) if I should pre-replicate billing documents into CRM ?
2) Or, the system uses the RFC to find these documents in ECC to create reference?
Please help me.
Best regards Kostya.
Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PM

not resolved =(
Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM

How to create Rules with Flex Field mapping in the bpm worklist

I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .

Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian

How to create Matrix with Group report layout in xml

Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
          Period-1     Period-2     Period-3     Period-4
COMPONENT
LABOUR - DIRECT
     Actual     1     2     3     4
     Actual Rate     10     10     10     10
     Standard Rate
     Var%
DEPRICIATION-DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
OVERHEAD - DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
LABOUR - IN DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
Thanks in advance

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How to create PDF with Form Builder (T-Code:SPF) and how to use it?

How to create PDF with Form Builder (T-Code:SPF) and how to use it? Is there anyone can show me some doc. or PA material ? << removed >> Thank you very much!!
Edited by: Rob Burbank on Nov 11, 2010 1:04 PM

PDF forms also known as Adobe From or Interactive Forms.
Check this link -
Interactive Forms
REG:ADOBE FORM
Adobe forms
Regards,
Amit

How to create folder with sub folder ?

How to create folder with sub folder ?

Hi,
Questions. 17 / 17 unresolved -> very bad reputation
but ok - let's help anyway ...
1. create everything in Screen Painter
2. set FromPane and ToPane property correct.
example:
Items in MainFolder: FromPane & ToPane: 1 to 3
Items in SubFolderA (From 2 To 2) - SubFolderB (From 3 To 3)
shouldn't be that difficult
in your Code set oForm.PaneLevel when the user clicks on the Folder
lg David

How to create file with APDU

Hello everybody,
It's my first time using Java Card ^_^,I want to create a file and fill the fill with binary data.but i don't know how to create file with APDU commands,so I need help here.
I think that there must be a Manual of the JavaCard's OS in this world,can someone tell me where to download it??
Thanks.
the fllowing is my card:
Samsung S1
Model:TiEx-32J
EEPROM size:32k
Platform Version:OP 2.0.1
Card Manager Status:OP_READY
KMC:40~4F/No derivation
Message was edited by:
AllenHuang

If you look around the forum for a bit, you will see that there is no notion of file systems on JavaCards (lexdabear posted this information less than two hours ago :-)). To store files, you will have to write an applet to hold byte arrays of the required size and handle receiving and sending of these.
As for documentation, you should have a look at the GP (General Platform) specification at http://www.globalplatform.org/, which defines communication between smart cards and other devices, as well as Sun's own JavaCard pages (http://java.sun.com/products/javacard/), which contain several useful resources on JavaCards.
Message was edited by:
Lillesand

How to create Vector with reference to Collection

hello experts,
can someone let me know how to create vector with reference to Collection interface.
Collection is an interface. and we cant create an instance of it. i'm not clear of what to pass in that constructor.
Vector v = new Vector (Collection c);
what are the possible objects of 'c'
post some example code please.
thanks

Ever heard of reading the javadocs?
"Collection is an interface. and we cant create an instance of it." - you don't understand interfaces, then.
// I certainly can create a Collection - here's one
Collection c = new ArrayList();
// Now I'll add some Strings to my Collection.
c.add("foo");
c.add("bar");
c.add("baz");
// Now I'll make a Vector out of it.
Vector v = new Vector(c);%

How to create parameter with multiple selection in a query (SQ02) ?

Hi Exports
Do you know how to create parameter with multiple selection in a query (transaction SQ02)?
thanks.

Hi
i know how to create user parameter at SQ02,
the question is how to create multiple selection parameter?

How to create database with ASM

HI
How to create database with ASM?
I install vmware workstation on window XP .On virtual machine install Linux 5 enterprise (Oracle) install.
I install oracle DB software only. Also make 3 disk for ASM .
1 -- When I want to install oracle DB with ASM . In this process candidate disks not show . Why?
How I can see disks ..
so I simple install oracle DB software only.
2 -- Now I want to create database with ASM by DBCA .
What process I will follow ?
Please guide me
Thanks

Hi
Steps to create database with ASM.
1.Install oracle binary with active CRS(For single node installation CRS is activated when you run root.sh) .
2.Create disk without file ssytem.
3.Assign disk to raw .
4.Change owner and permission to raw devices.
5.Configure ASM manually or USing DBCA.
Manually ASM Configuration.
a.Create initialization parameter file and password file.
b.Mandatory parameter is "instance_type=asm" as per your need configure rest of parameter like db_cache_size,large_pool_size,processes,remote_login_passwordfile,shared_pool_size etc..
c.To discover disk configure "asm_diskstring=/dev/raw/raw*"
Using DBCA to configure ASM.
1.In storage type section choose ASM.It will ask for password of sysdba in 10g.
2.ASM configuration window will open -> here it create disk group -> it shows all available ASM candidate disk automatical -> choose normal redundancy,external redundancy or high redundancy.
ASM disk also can be conbfigured with ASMLIB .
If ASM disk is configured you can start asm instance in nomount state and query to v$asm_disk to see all candidate disk.V$asm_disk only shows disk which is configured in asm_diskstrings.
Hope this will help U,
Tinku

How to create CATALOG with MS SQL Server?

Connection class has getCatalog(strCatalog) method. In order to use it, we must create CATALOG in Database?
How to create CATALOG with MS SQL Server?
Help me, please!!!

You do not create these for any database, this is part of the Connection metadata.
The Catalog is the third level of table-like database object qualification as in "Catalog.Schema.Table". For SQLServer the qualification scheme is "Database.Owner.Table" and I would be surprised if they reported anything for the current connections getCatalog() method call.
What many people do is avoid table qualification altogether by setting the connection's context in a database proprietary manner and then keeping the SQL as clean as possible. For many ODBC and JDBC drivers this can be set in the configuration. For MS SQLServer you can also execute a "USE dbname" statement on the connection to avoid table qualification.

How to Create IView with the HTML Content

Hi Friends,
Give me steps how to create IView with the static html file.
Regards,
Lakshmi Prasad.

Hello thr...
follow the below link for the required steps.
[KM Document iView|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/cf14bcd42911d5994400508b6b8b11/frameset.htm]
You need to upload the document onto KM. Then you will be able to create the KM Document iView.
Cheers!!!
Biroj Patro.

How to create swf with transparent backgound

Similar Messages

Maybe you are looking for