How to create table controls

hi experts,
I have used table controls using wizard.is that correct .and when i am using that i cannot set filters.all the records in tha table are displayed.how to use filters here ?
what about the ordinary table controls how to create it .pls send some links and tips for it...
thanks
mani

check..
DEMO_DYNPRO_TABLE_CONTROL_1
DEMO_DYNPRO_TABLE_CONTROL_2
even check below code...
BDC Example: Using Table Control in BDC
Among beginners, using table control in BDC is always a puzzle.
Following is a sample code of handling table control in BDC.
REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
       DUMMY(100) TYPE C,
       END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
       LIFNR(10) TYPE C,
       BUKRS(4) TYPE C,
       EKORG(4) TYPE C,
       KTOKK(4) TYPE C,
       NAME1(30) TYPE C,
       SORTL(10) TYPE C,
       LAND1(3) TYPE C,
       SPRAS(2) TYPE C,
       AKONT(6) TYPE C,
       FDGRV(2) TYPE C,
       WAERS(3) TYPE C,
       END OF IT_XK01,
       BEGIN OF IT_BANK OCCURS 0,
       BANKS(3) TYPE C,
       BANKL(10) TYPE C,
       BANKN(10) TYPE C,
       KOINH(30) TYPE C,
       LIFNR(10) TYPE C,
       END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
       IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = 'C:\VENDOR.TXT'
   FILETYPE                      = 'ASC'
TABLES
   DATA_TAB                      = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
    IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
    IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
    IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
    IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
    IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
    IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
    IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
    IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
    IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
    IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
    IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
    APPEND IT_XK01.
ELSE.
    IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
    IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
    IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
    IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
    IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
    APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro      using 'SAPMF02K' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-REF_LIFNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-LIFNR'
                              IT_XK01-LIFNR.
perform bdc_field       using 'RF02K-BUKRS'
                              IT_XK01-BUKRS.
perform bdc_field       using 'RF02K-EKORG'
                              IT_XK01-EKORG.
perform bdc_field       using 'RF02K-KTOKK'
                              IT_XK01-KTOKK.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-TELX1'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFA1-NAME1'
                              IT_XK01-NAME1.
perform bdc_field       using 'LFA1-SORTL'
                              IT_XK01-SORTL.
perform bdc_field       using 'LFA1-LAND1'
                              IT_XK01-LAND1.
perform bdc_field       using 'LFA1-SPRAS'
                              IT_XK01-SPRAS.
perform bdc_dynpro      using 'SAPMF02K' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-KOINH(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
DATA : FNAM(20) TYPE C,
       IDX      TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPMF02K' '0210'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-FDGRV'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFB1-AKONT'
                              IT_XK01-AKONT.
perform bdc_field       using 'LFB1-FDGRV'
                              IT_XK01-FDGRV.
perform bdc_dynpro      using 'SAPMF02K' '0215'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-ZTERM'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0220'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB5-MAHNA'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0310'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFM1-WAERS'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFM1-WAERS'
                              IT_XK01-WAERS.
perform bdc_dynpro      using 'SAPMF02K' '0320'.
perform bdc_field       using 'BDC_CURSOR'
                              'WYT3-PARVW(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
                        MODE 'A'
                       UPDATE 'S'
                     MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.

Similar Messages

How to create table control and link in screen exit

Hi Friends,
                 I want to create table control in enhancement CONFPP07. The values entered in table control should be stored in ztable along with some other information.
But I want to know how to create table control in screen-exit and how and where to write code and how to link all.
               Kindly send me step-by-step documentation or real time examble prg.
               Kindly give ur answers for this problem only.
Thanks in Advance,
S.Senthil kumar

If u have a screen exit..then u will have a option to create a sub screen..in that sub screen u activate the pai and pbo events..it will show u where to write the code..

How to create table control without wizard....???

Hello experts !!
Plz tell me how to create table control without wizard.
for sflight table.
Scenario 1
I have one screen like 1000.
There i have taken carrid, connid, fldate as criteria.
Now i want to display Planetype, Price, Seatsmax in the table control.
Scenario 2
i have two screens 1001, 1002.
in the screen 1001 i have taken carrid, connid, fldate as criteria and there is a Button.
when i will click the button it will show the price, planetype and seatsmax in the table control in the next screen, i.e 1002
plz help me out...
and how to save new record in the dictionary table from that table control....

Hi
see the sample programs and design accordingly
syntax:
CONTROLS .
if you only want to determine the row of the table control. SY´-SUBRC allows you to check if the cursor is placed in a row of a table control.
u need to comment the performs of table control fields and write ur own perform statements. And u have to declare the table control fields as separate internal tables.
Go through this urls.
www.****************
www.sap-img.com
Check the below links.
just refer to the link below
http://www.sapmaterial.com/tablecontrol_sap.html
step by step procedure with screen shots
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://sap.niraj.tripod.com/id25.html
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
Regards
Anji

How to create table control in script

hi expects,
how can i create table control in script?

Hi,
It is not possible to create Table Control in Sap-Scripts n u can create it by using se51 that is screen painter only...
if useful reward with points,
regards,
Madhuri.

How to create Table Control in Infotype

I want to create the table control in infotype (e.g. like table control in infotype 0008 basic pay ).

Hi
you can declare an internal table from infotype, with something like this
DATA: BEGIN OF t_p0008 OCCURS 0.
INCLUDE STRUCTURE pa0008.
DATA: END OF t_p0008.
the transparent table for infotype 0008 is PA0008, there is an structure P0008.
the transparent table for infotype 0001 is PA0001,
the transparent table for infotype 0002 is PA0002,
and so on..

How to create tables for control data

HI
How to create tables for controls of types of data (screen control)? what is the process for this
Regards,
Anil

Well, do you want to do it the easy way? If so, then just create a table maintenance program. You can do this via SE11, utilites, table maintenance generator. The table maintenance will be generated and you can then maintain the table via SM30.
If you want to go the more challenging way, you can write your own table maintenance program using a table control on your screen. You can use the table control wizard to help you along.
Regards,
Rich Heilman

How to Create a Control In Notepad

Hello:
I am need help creating a control file. I have never done this before. I have to load the following script into notepad:
load data
infile 'names.txt'
badfile 'names.bad'
truncate
into table names
fields terminated by ','
trailing nullcols
(first,last)
I then went to Command Prompt to begin the SQL Loader command and recieved the following message.
SQL*Loader-500: Unable to open file (names.ctl)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system

DUPLICATE post
How to Create a Control In Notepad

How to handle Table control in BDC

How to handle Table control in BDC

HI,
Table Control in BDC
HI,
Refer the link:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
The concept is easy: it has to indicate the index of the table control in the field name, so if you have to populate the first record of table control:
BDC-FIELDNAME = <FIELDNAME>(01).
If you fill the second row:
BDC-FIELDNAME = <FIELDNAME>(02).
and so....
Now the problem is usually on how many records you have to load, because u can fill only the rows of table control available in the screen, If you have more records than it can be displayed yuo have to simulate the command to go next page.
The number of recod can be displayed can depend on pc resolution and many program haven't command to go to next page (in this case it could be impossible create a BDC program9.
A way to create a bdc program resolution indipendent is to work on the first and second row.
- Place the first hit in the first row of bdc;
- Place the second insert in the second row of bdc;
- Place the last hit to the top of table control;
- Place the next hit in the second row;
- Place the last hit to the top of table control;
- Place the next hit in the second row;
- .... and so
For more info: Search in SDN with TABLE CONTROL IN BDC.
Will get a lot of related links.
<b>Reward points if this Helps.
Manish</b>

How to use table control in LSMW

Hello All,
I have requirement to use LSMW , in my using transaction have table control ,I need to pass values in table control . how to use table control in LSMW .Can any one give me the solution for this.
Best regards,
Satya.

Note: The recording function records a fixed screen sequence. It cannot be used for migrating data containing a variable number of items or for transactions with dynamic screen sequences!
Tip: It is possible to create a recording via SHDB, generate a program out of this recording, and adopt the program to your needs and registrate the program to be able to use it in LSMW.
Thats means, for creation of project and WBS Elements is not possible through
1. LSMW-BDC (For both CJ01 and CJ20n)
2. LSMW-BAPI (Method: Maintain is not listed )
3. LSME-Standard Batch Direct Input.
Its possible through programmatically(SE38.) either using BAPI Or BDC.
Thanks,

Getting Error when createing Table control in Module Pool.

Hi expert ,
i am creating a module pool program . i want to crate line item value for that i have created table control on screen 200 .
but when i am activation to that giving error below mention.
The field "ZFBDCHALLAN-EBELN" is not assigned to a loop. "LOOP ...ENDLOOP" must appear in "PBO" and "PAI".
thanks
chandra

Its mandatory to have loop endloop in both events
PBO and PAI
loop your internal table similarly.
Please check it should be below format
PROCESS BEFORE OUTPUT.
* Set PF Status for screen 100.
MODULE status_0200.
* This module will initialize the field
MODULE init_0100.
LOOP AT t_custmat_asg INTO w_custmat_asg
      WITH CONTROL tc_1
      CURSOR tc_1-current_line.
* It will count the record in internal table
    MODULE set_linecount.
* Screen Modifications
    MODULE status_check.
ENDLOOP.
PROCESS AFTER INPUT.
* Module AT EXIT-COMMAND
MODULE exit_0200 AT EXIT-COMMAND.
LOOP AT t_custmat_asg .
    CHAIN.
      FIELD :
      w_custmat_asg-check,
              w_custmat_asg-kunnr,
              w_custmat_asg-name1,
              w_custmat_asg-asgtyp,
              w_custmat_asg-productcls,
              w_custmat_asg-sctegry,
              w_custmat_asg-ctegry,
              w_custmat_asg-parent,
              w_custmat_asg-frmdate,
              w_custmat_asg-todate,
              w_custmat_asg-frecster,
              w_custmat_asg-salesrep,
              w_custmat_asg-flag,
              w_custmat_asg-username,
              w_custmat_asg-udate.
* Validation For Forecaster.
      MODULE validate_forecaster.
* Validation For Salesrep.
      MODULE valiate_salesrep.
* Validation for Customer
      module validate_customer.
* Validate null value
      module validate_null_vals.
* Validation For Data Changed On The Screen
      MODULE data_changed_0200 ON CHAIN-REQUEST.
    ENDCHAIN.
ENDLOOP.
Regards
Satish Boguda

How to create table in java

i need help on this topic
how to create table in java

lucky786 wrote:
help urgentlyI am too late?

How to create table in bisystem

hi,
how to create table in bi system.
My requirement is such like that i want to store data which is used in the routine.
i want to maintain the data dynamically so that i want to create the table.

Hi.........
Same as ABAP only...........using SE11........
Steps for creating table:.
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
Hope this helps......
Regards,
Debjani..........

How to create table in interactive form via Java Web Dynpro

Hi,
How to create table in interactive form via Java Web Dynpro ?
Any online tutorial / example ?
Thank you.
Regards,
Eric

Hi Eric,
Just choose the UI element Table from Form Library and drag and drop it on the form. now choose the no. of rows and columns and other settings you want about table from the wizard initiated through this process. This all is what you have to do to create the table. Now to bind it to the fields of the data source bind the individual colums to individual attributes of the node in the datasource.
Hope it will solve your query.
Regards,
Vaibhav Tiwari.

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

How to handle table control in BDC while uploading item details for anorder

How to handle table control in BDC while uploading item details for an order?
What is the use of CTU_PARAMS structure in BDC?
In Finance I have done some changes to the layout set by coping to a zscript(duning letter) and how can assign the print program?
What is the process to test the finance script?
How can I see the print preview whether it is coming correctly or not?
Thanks in advance.
Regards.
Abhilash.

hi,
for the bdc control refer the following link:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
ctu_params:
refer to the link
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/dataTransfers-LSMW%2CALE%2C+BDC
reward if useful,
thanks and regards

How to create table controls

Similar Messages

Maybe you are looking for