How to create tables in adobe muse

I really needed to have a table with borders in my site and tried putting text boxes on top of and beside text boxes, but then when the content changed, they would get all crazy messed up and look really sloppy.  I tried copying my html table and I lost the borders and styles around everything and it looked kind of messy too.  Finally-- I tried inline styles on each cell and each row and it did exactly what I wanted it to.  I tested it in adobe Dreamweaver first and then copied and pasted into html where I wanted it. Oh.. yes.. in my first line of my code, I put the table width in pixels.  that was the only line I had to change for the tablet and mobile versions.  I also put the first column width in my fist column cell.  In line styles is the way to get exactly what you want.

Do you have a URL you can share showing your tables?

Similar Messages

  • How to create table and digital signature ?

    Hello,
    I would like to ask two questions regarding SAP interactive forms by adobe.
    1st question:
    How to create table in interactive form?
    Table that i can add rows and column and will show it in the form.
    Example the rows and columns that i want:
    <u><b>ID:</b></u>                <b><u>Name:  </u>  </b>               <u><b>DOB:</b></u>
    1                  Jack                      01/02/80
    2                  Ivy                         10/12/82
    2nd question:
    How to create digital signature ?
    I'm creating a adobe forms which need employee to sign on the form. I use signature field at my form. However, i don't know how to create a new signature and insert in the signature field.
    Can any one provide the answer with step by step guide?
    Thanks a lot

    Hi Pradeepa,
    you said you have your digital signature in
    BMP format? That means Bitmap and would mean you are actually talking about a picture! THIS IS NOT A DIGITAL SIGNATURE!
    A digital signature is a cryptographic key (aka public key cryptography) that is used to digitally sign a document, or at least a hash value derived from the document. Digitally signing means, applying the key in a well defined way (this is the algorithm used) to the document or hash value. You do this with your private key and the receiver of the document can then use your public key (which you can distribute in any way you want, even unsecure) to unencrypt the hash value. If this succeeds the receiver knows that the document was signed by you.
    This is because both keys are mathematically related in such a way, that what one key encrypted can only be decrypted by the corresponding other key and by no other key. You even can´t decrypt a document with the same key it was encrypted with, this is the difference to symmetric encryption - please have a look at help.sap.com and search for digital signatures.
    The named formats (afs, pfx and p12) are ways of coding the key, together with information about your person, such as email address and information about validity of the key into a
    certificate. This type of certificate is then called a x.509 certificate and is the same you might have seen when connecting to a secure webserver such as the one of your bank website. 
    Signing a form with such a certificate provides for mathematically and therefore business related proove of a users identity.
    In case you are really using a bitmap, this cannot work and would not serve you any good.
    Ask yourself this question: I want to make sure that the form was signed by a specific person. How can I make sure that the signing can only be done by the person pretending to have done so?
    A bitmap contains a picture, probably of the persons handwritten signature. How can I make sure that this picture was NOT recreated in MS Paint or Photoshop by someone else?
    The answer is:
    you can't! Therefore this way of prooving identity is useless. 
    You need to provide your users with digital signatures, put these in the certificate cache of your IE.  If a user then clicks on the signing field, the private key is used to digitally sign the form - create a hash value of the form and encrypt it with the private key. After the form is send back to the server or you, you use the corresponding public key to decrypt the hash value and, as said above, if this succeeds, identity of the signer is proven.
    THIS IS AN OVERSIMPLIFICATION! You might want to take a look at Adobe Reader Credentials.
    Regards,
       Christian

  • How to create table in java

    i need help on this topic
    how to create table in java

    lucky786 wrote:
    help urgentlyI am too late?

  • How to create table in bisystem

    hi,
    how to create table in bi system.
    My requirement is such like that i want to store data which is used in the routine.
    i want to maintain the data dynamically so that i want to create the table.

    Hi.........
    Same as ABAP only...........using SE11........
    Steps for creating table:.
    There are two approach in creating a table.
    1. Bottom-up approach
    2. Top-down approach. 
    Both are valid and you can choose which approach is suitable for you.  I always use the bottom-up approach. Here are the steps to create the tables with this approach.
    1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
    2. Enter the short discription of the table and enter the field of the table.  If it is primary key and you have to check the box. 
    3. Enter the data element  and double click it, you will be asked to save and will take you to data element discription page.  Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
    4. If you wanted to use the existing domain then its fine, or else, you have to create one.  Enter the domain name in the data element page and double click it.  Page will ask to save and jump to domain creation page.
    5. In the domain page, you have to save the information which you have already given in the data elements page and check it.  Before going to data element page, you have to activate the domain.
    6. Go to data element page and save, check and activate.
    7. Go to main table page and save, check, and activate.  
    8. Also, you have to save the technical settings of the table.
    The table is now ready for operation. You can use it in your program or you can use it to enter information.
    Check table:  It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
    It can be created by creating the foreign key from the main table.  Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
    SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.  
    Hope this helps......
    Regards,
    Debjani..........

  • How to create table in interactive form via Java Web Dynpro

    Hi,
    How to create table in interactive form via Java Web Dynpro ?
    Any online tutorial / example ?
    Thank you.
    Regards,
    Eric

    Hi Eric,
    Just choose the UI element Table from Form Library and drag and drop it on the form. now choose the no. of rows and columns and other settings you want about table from the wizard initiated through this process. This all is what you have to do to create the table. Now to bind it to the fields of the data source bind the individual colums to individual attributes of the node in the datasource.
    Hope it will solve your query.
    Regards,
    Vaibhav Tiwari.

  • Sap script '' how to create table frame in sap script"""

    i have some problem in sap script''  how to create table frame in sap script"""

    Hi,
    you can use BOX command..
    Syntax
    /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
    Effect: draws a box of the specified size at the specified position.
    Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
    1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
    Default: Values specified in the POSITION command.
    The following calculation is performed internally to determine the absolute output position of a box on the page:
    X(abs) = XORIGIN + XPOS
    Y(abs) = YORIGIN + YPOS
    2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
    3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
    4. FRAME: Thickness of frame.
    Default: 0 (no frame).
    5. INTENSITY: Grayscale of box contents as % .
    Default: 100 (full black)
    Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
    Units of measurement: The following units of measurement may be used:
    • TW (twip)
    • PT (point)
    • IN (inch)
    • MM (millimeter)
    • CM (centimeter)
    • LN (line)
    • CH (character).
    The following conversion factors apply:
    • 1 TW = 1/20 PT
    • 1 PT = 1/72 IN
    • 1 IN = 2.54 CM
    • 1 CM = 10 MM
    • 1 CH = height of a character relative to the CPI specification in the layout set header
    • 1 LN = height of a line relative to the LPI specification in the layout set header
    /: BOX FRAME 10 TW
    Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
    /: BOX INTENSITY 10
    Fills the window background with shadowing having a gray scale of 10 %.
    /: BOX HEIGHT 0 TW FRAME 10 TW
    Draws a horizontal line across the complete top edge of the window.
    /: BOX WIDTH 0 TW FRAME 10 TW
    Draws a vertical line along the complete height of the left hand edge of the window.
    /: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
    /: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
    check the fallowing link also
    http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
    Mark the points if u find it useful...
    Regards,
    Omkar.

  • How to paste text in Adobe Muse with same color where i copied this text?

    How to paste text in Adobe Muse with same color where i copied this text?

    Copy&paste is a function of your browser, not the forum software. Ctrl+V will work just fine.
    Mylenium

  • How to create tables in Database when webdynpro project is deployed

    Hi
    I Created a project.in that i created stuctures using simpletypes.Based on structure  i created the Context,then created screens.Now how to create tables in database using this structures .Because i want to store the values in the database.Please help.this is very urgent.i will give good points
    thanks
    prasad

    Hi Prasad,
    You can write normal JDBC code in your controller.
    Check this Web Dynpro Java
    You can use the tool for generating the classes from your DB.Check this too
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dfad6017-0301-0010-bdb8-a8b7d2006f36
    Best Regards, Anilkumar

  • How to create table.maint.generator and enduser should use using ztcode

    Hi,
           can any one guide me how to create table maintanence generator and after creating,enduser must use using ztcode.
             any help can be appreciated.
    Thanks & Regards,
    Sandeep.

    Hi,
    Table Maintenance generator is required to do Manual entries in the Table. If the requirement is to update the table only programmatically and not manually then table maint. generator is not required.
    Manual entries in table can be maintained ( New record can be inserted / existing can be modified ) using transaction SM 30, if the table maintenance for the table is generated.
    How to activate Table maint.
    Goto SE11 and open the table.
    Click UTILITIES -> Table Maint. Generator, Enter the details and click on Save. Then activate the table.
    chk a sample 1.
    refer.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
    some more helps
    Check out this thread:
    table maintenance
    http://help.sap.com/saphelp_erp2005/helpdata/en/a7/513520407a11d1893b0000e8323c4f/frameset.htm - a link for basics on Table Maintenance.
    Also, Check out this weblog on table maintenance:
    /people/sudheer.cheedella/blog/2006/02/20/extracting-data-in-table-maintenance
    <b>how to create a a T-code of that</b>
    Go to se93.
    Then create the new T.code.
    Under that select parameter Transaction.
    Then give the sm30 in the t.code in default values tab.
    check the checkbox skip initial screen.
    in classification tab.
    click checkbox inherit gui attributes..
    Now below..
    In the default values..
    WRITE
    viewname = give ur table name.
    show = X
    save and check it once...
    now u can able to call ur table through ur new t.code...
    rgds
    anver
    if hlped pls mark points

  • How to create table view with reference table

    Hi experts,
    How to create table view with reference table in SE11, plz gve me stp by stp procedure.
    pints grnded for hlp.

    Hi
    Go to Tcode se11 choose view and enter the name and create a popup opens up choose database view option
    enter the description
    On the left hand side choose the table name.
    Click on view fields tab and choose your table fields.Here you can choose which fields you want in your view.
    Save and then activate.
    Hope this helps.
    Regards,
    Harish

  • How to create table view

    Dear Experts,
    how to create table view for single table? and once I create table view I have to create Generic data source so plz provide me the step to create it.
    Please search the forum before posting a thread
    Edited by: Pravender on May 6, 2011 11:18 AM

    Hi,
                         There is big advantage of creating a view for single table rather than RSO2.
                My scenario is like this  : My table VBAK has 113 fields i want only 9 fields from them.
                         RSO2: By doing generic extraction with RSO2 it will fetch all 113 fields from the table VBAK.So,it'll definitely degrades the performance . For transferring 9 fields why we have to fetch all 113 fields.
                         VIEW: By using view we can specify some fields in view fields.So, only those 9 fields will be fetched from table.  In this extract structure contains 9 field transferring 9 fields.Then we can create generic extraction using this view.
    Regards
    satya.

  • How to optimize SEO in Adobe Muse?

    I am new to Adobe Muse. Could someone please provide me where I can find detailed info regarding how to optimize SEO in Adobe Muse?
    Thank you,
    AdobeExplorer

    Hello,
    Please refer to below mentioned link. This will surely answer your Question.
    http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-metadata-to-the-page/
    http://muse.adobe.com/strategies-for-seo.html
    Regards
    Vivek

  • How to import video into adobe muse?

    how to import video into adobe muse?

    If you want to embed videos in your muse site, without using a service like youtube or vimeo, then you will need to manually upload the video files on the server and use them via the video tag available in html5, HTML5 Video
    To insert the video tags in your muse pages, you will need to use the 'Object -> Insert HTML' option.
    Since this option is not available in Muse, out of the box, I will recommend that you post this on our ideas section over here, https://forums.adobe.com/community/muse/ideas, and let our devs team know of this requirement.
    - Abhishek Maurya

  • How to Create Icon Get Adobe Reader

    How to create Icon "get Adobe reader" at my free website [link removed] for visitor downloading the price list brochure with adobe.
    Please help.
    Thanks

    You don't need to create an icon, you can get it and linking instructions at http://www.adobe.com/misc/linking.html#linking

  • How to create crossword using Adobe captivate

    how to create crossword using Adobe captivate

    OK.  Again I am not needing clarification here.  Did you INSERT the SWF as an animation into the Captivate project? Or, did you keep the SWF as an external file?  If the SWF is external to the main Cp SWF then perhaps it's not working when you publish because the content cannot find the SWF.  If you have made sure that the SWF is definitely in the publish location, check whether or not you have that location set as a trusted location in your Flash Global Security settings.

Maybe you are looking for