How to create Talent Group in Talent Management System (Infotype 7420)

Hello All,
Can anybody let me know how to create talent Group entries in SAP HR TMS module (infotype 7420).
And one more thing if somebody know how to link application area for a user in TMS.
Mani

we have to do it through EP interface through BP TMS.
1. connect EP to SAP system
2. Configure all the iviews of TMS business package so it can communicate with SAP system (change only SAP system name for all iviews)
3. Assign the roles to user of EP
4. run application using TMS

Similar Messages

  • How to create a backend administrator content management system?

    How to create a backend administrator content management system using SQLyog515 and JSP only.
    Can give suggestions?
    Thanks,
    JSPnewbie*
    Message was edited by:
    Liting_JSPnewbie

    Have a look at Perch
    Perch - The really little content management system (CMS) - Perch
    It requires a php/mysql database to run but the tables and set up are all automated through the Perch set up files - you just need a server that runs php/mysql. It works on the same principals as the one Ben suggested but its a lot cheaper for a one off site - however if you intend to build more CMS driven sites the one Ben suggested might be more financially viable in the long run.
    The nice thing about Perch CMS is it fits in with your workflow unlike Wordpress/Joomla where you have to jump through hoops to change anything.
    Plus I think you can take Perch for a spin before buying (or at least you could when I was exploring CMSs) - you can't with Power CMS. I never investigated Power CMS beacuse I would not buy something before trying it. It looks good but it might be a bit dated as it doesnt seem to be in continuous develoment. Perch is in a constant state of development and the guys are working to make it better on a daily basis.

  • How to create "valuation group code" in ECC system

    Hi,
    How to create" valuation group code" in ecc system and what is the path to create valuation grp code
    Thanks&regards
    kishore kumar

    Use the following IMG path.
    MM -> Valuation and Account Assignment -> Account Determination -> Account Determination without wizard -> Group together valuation areas (T Code OMWD).  The Val.Grpg Code in this customizing is a freely definable 4-character code.  You can then use this as valuation modifier in MM-FI account determination (OBYC).
    Assign pts. if this answers your question!

  • How to create a built in Content Management System

    Hey guys, I've found myself in a spot of trouble.
    My client commissioned me to create for him a website for his new restaurant (Paul's Place). I built him a responsive site using another website I found online (www.megnarestaurant.com) as a guideline. The problem is though that the client plans on changing the menu about every month and wants to be able to change it himself. I could teach him how to edit the files and add new ocntent himself (It's not even that hard after all) but that just doesn't seem like the right option.
    Instead, I want to create a built in content management system that doesn't require a third party website or software like Wordpress or Joomla. I was thinking about having a page called "www.paulsdiner.com/login" where the client can log in using a username and password and can then change the content of the website.
    My menu page is pretty much the same as the one found on "www.megnarestaurant.com/starters.html". I'm also using gloriafoods as an ordering system meaning that the client will have to change it on both the website itself and on the actual gloriafoods website (Not really an issue).
    I want the client to be able to edit the menu boxes and add new boxes along with being able to add a new menu section (Like in the Jump Menu) which follows the template of the existing Jump Menu.
    I'm making this website as a favour to my friend so I'm not being paid. As a point of reference (And future bragging and maybe some innocent blackmail ) how much do you guys think the creator of "www.megnarestaurant.com" charged his client?

    Have a look at Perch
    Perch - The really little content management system (CMS) - Perch
    It requires a php/mysql database to run but the tables and set up are all automated through the Perch set up files - you just need a server that runs php/mysql. It works on the same principals as the one Ben suggested but its a lot cheaper for a one off site - however if you intend to build more CMS driven sites the one Ben suggested might be more financially viable in the long run.
    The nice thing about Perch CMS is it fits in with your workflow unlike Wordpress/Joomla where you have to jump through hoops to change anything.
    Plus I think you can take Perch for a spin before buying (or at least you could when I was exploring CMSs) - you can't with Power CMS. I never investigated Power CMS beacuse I would not buy something before trying it. It looks good but it might be a bit dated as it doesnt seem to be in continuous develoment. Perch is in a constant state of development and the guys are working to make it better on a daily basis.

  • How to create a group including several  roles?

    Hi experts,
    Hereby a simple question but urgent, that is, how to create a group in portal which includes several roles. For exemple a group for manager contented the roles for managers and another group for employees. Thus it simplifies the role assignment for any user.
    Thanks and with great appreciations

    Hi! wuyia,
      to create a group and assigining the roles to the group, you will need the userAdministrator role in the portal.
    1.Go to userAdministrator role.
    2.click on group workset and create a new Group
    3.click on Role workset and search the role which you want to assign to the group.
    4.edit the role and add your group to this role.
    5.click on save button.
    regards,
    Mithilehwar

  • How to create a group contact list on iphone4?

    how to create a group contact list on iphone4?

    You can create your groups on your computer and sync them on your iPhone. Or you can use an application. I developped Easy Group, to manage group of contacts, and send group texts and group emails.
    http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
    Rémi
    Note: I may receive some form of compensation, financial or otherwise,from my recommendation or link.

  • How to create master group in Portal - Segment Builder?

    Hi All,
    May i know how to create master group by using existing target group in segment builder PCUI in portal?
    I manage to do it in sapgui:
    tc: crmd_mktseg_mgr -> create new master group -> assign existing target group -> execute button -> master group is created.
    I tried in portal: click on segment builder tab -> search existing profile set -> open existing profile set -> click on target group tab -> mark one of target groups -> click on Master group button -> save changes -> go back to sapgui crmd_mktseg_mgr -> search for all the master groups -> i dun see result that i did in portal.
    Can guide me on this?
    Appreciated your guide. Thanks.
    Regards,
    wyee

    Hi All,
    May i know how to create master group by using existing target group in segment builder PCUI in portal?
    I manage to do it in sapgui:
    tc: crmd_mktseg_mgr -> create new master group -> assign existing target group -> execute button -> master group is created.
    I tried in portal: click on segment builder tab -> search existing profile set -> open existing profile set -> click on target group tab -> mark one of target groups -> click on Master group button -> save changes -> go back to sapgui crmd_mktseg_mgr -> search for all the master groups -> i dun see result that i did in portal.
    Can guide me on this?
    Appreciated your guide. Thanks.
    Regards,
    wyee

  • How to create  user groups in portal

    Hi
    I am new to portal..can any one explain how to create a group and add the users to that group.
    Thanks
    Rahul

    Hi
    Go to  "user administration"-> Identitiy management place "Groups" in the Search Criteria then you will see the options for creating NEw Group
    at the time of Group creation there is a tab for Assigned users from there you can add users.
    Or you select the user name and click on modify and select Assigned groups and assign your group.
    Regards,
    Mahesh

  • How to create a group calendar?

    Hello,
    i am sorry but this is one more question on wiki-group-calendars.
    *In short:*
    I am not able to create a group calendar with the wiki frontend. the calendar that is created with a wiki is owned by the admin of the wiki. So it is always a personal calendar that cannot be shared in iCal.
    LONG:
    I want to create a group calendar that is viewed and edited through iCal.app and the web service. Apple´s "wiki deployment" guide says on page 57:
    +"The web calendar allows you to easily schedule events for yourself or your group. ...+
    +There are *two types of web calendars: personal and group*. You can send and receive event invitations through the personal calendar but not through the group calendar. Also, *while anyone in a group can create or edit events in a group calendar*, you can edit only events in your own personal calendar or event invitations you send to other people.+
    +The web calendar uses iCal Server to store events and invitations. ..."+
    But there is not mentioned how to create a group calendar. The calendar created with the wiki web-frontend belongs to the admin of that particular wiki. This is why the calendar data ist stored in folder named with the UUID of the wiki admin. Also the alias "http://server.fqdn:8008/principals/groups/mygroupname/" which i provided in iCal turns into ..._uids_UUID-of-the-wiki-admin and only the wiki-admin can access this calendar in iCal.app.
    My research on this topic reveals that there were in issue that should be resolved in 10.6.4 (that is running on our Server). So, again, how to create a group calendar?
    Thanks, Philipp.
    10.6.4 OSX Server
    10.6.x Clients

    farmer tan wrote:
    you need to go to the wiki page and add the wiki's there and then in the setting of the wiki is where you set permissions and services such as calendar, blog, and podcast you can also set all permissions for the wiki in the settings tab
    fyi none of my groups were available unless i logged into the wiki as the Directory Admin not Server Admin
    migrated from 10.5.7 to 10.6
    Message was edited by: farmer tan
    Could you be more specific farmer tan, please?
    You said "you need to go to the wiki page and add the wiki's there...." What is the "wiki page" you mention? Is that some place I go to via the browser or the Server Admin tool?
    I went to http://ical.mysite.com/ical/ and logged in as the Directory Administrator but didn't see anything resembling what you described.
    Thanks in advance for any help you can provide.

  • How to create a group mailing list in JavaMail?

    Hello,
    I've been searching through the entire API, specifically the InternetAddress class and I can't seem to find out how to create a group/mailing list. Does anyone know how to do this?
    That is, I would like to be able to group a bunch of e-mail addresses together and give that group a name "my friends". Then send it off using this 'group mail address' as opposed to an array of InternetAddress[]. Then when the recipients receive the e-mail, they see "my friends" in the To: field, instead of everyone's e-mail address...
    Is this possible in JavaMail? I've tried many things like creating an InternetAddress object passing in a comma-delimited list of e-mail addresses but it doesn't like it.
    Thanks in advance!

    Hi:
    I have the same problem. I've read JavaMail implements RFC 822 which allow mailing lists. But, �how can I implement it with JavaMail?
    Best regards,
    Fabio Galarraga.

  • How to create a group address for emails?

    I don't know how to create a group address to be used in emails?

    http://www.dummies.com/how-to/content/how-to-organize-contacts-into-groups-in-mo untain-l.html
    http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
    Hope this helps.

  • How to create a group.

    Hello All,
    how to create a group in web dynpro for Abap.
    Thanks and regards,
    Lisa.
    Message was edited by:
            Lisa Roy

    If so,  you can simply right click on the ROOTUILELEMENTCONTAINER node of the UI elements tree in the top right hand corner of the  Layout Tab, and choose Insert Element.  From the dialog, give the name and then choose Group from the listbox.  That's it.
    Regards,
    Rich Heilman

  • How to create a group on the iPhone 4S?

    How to create a group on the iPhone 4S?

    yes  By using this group will it use the cell phone numbers?

  • How to create a group of contact from a multi-selection of mails in a mailbox to answer to all senders?

    How to create a group of contact from a multi-selection of mails in a mailbox to answer to all senders?

    Use Mail Scripts. Its Add Addresses function will collect all the addresses from all selected messages and allow you to select the ones you want to add and allow you to create groups as you go.

  • How to create a group mailing list?

    how to create agroup mailing list?

    i have followed instructions on "how to create a group mailing list" & get a total blank when i hit return after entering the group name in addressee column.   this is after i created a new group under address book, & then drug over individual names into the group.   what am i doing wrong?

Maybe you are looking for