How to create text names within a number or shape

I would like to learn how to create a print design for college hoodies. I get asked all the time but it takes me a very long time to do it. I am sure there is a quicker way in illustrator.
I want to create a design like this image. Can Anyone Help me please?
I am using Illustrator CS 5.1 right now.

Just use the big numerals as text boxes and pour text into them.
Be aware thought that text boxes can not be compound paths so you will have to make some special arrangements for 4, 6, 8, 9 and 0.
Either Text Wrap or slice the numerals into smaller abutting text boxes. I suggest that the latter will be easier.
Once you’ve done the job the first time it will be easy to do a repaet with new text.

Similar Messages

How to create a table with varied number of columns?

I am trying to create a balance table. The colunms should include years between the start year and end year the user will input at run time. The rows will be the customers with outstanding balance in those years.
If the user input years 2000 and 2002, the table should have columns 2000, 2001, 2002. But if the user input 2000 and 2001, the table will only have columns 2000 and 2001.
Can I do it? How? Thanka a lot.

Why did you create a new thread for this?
How to create a table with varied number of columns?

How to Create Business Partner with fix number in t-code :BP

Dear SIr,
Normally I will set number range for auto to create Business Partner. In case , If we would like to crea How to Create Business Partner with fix number in t-code :BP , howe to do?
Please kindly advise.
THnak you and best regards,
Vimol

Dear Shobhit,
How to put the thread as you mentioned.
Best regards,

How to create text table

can anyone tell, how to create text table in abap.

Hi,
Follow this procedure
To create a text table for a table ZABC,
1. you have to create a ZABCT table with the field = all the primary fields of table ZABC + SPRSL type SPRAS + Text field.
2. Every other field except the text field should be primary key fields.
3. Maintain a foreign key relationship between ZABC and ZABCT over the field required field (in TSTCT the required field is TCODE).
4. Activate the table.
5. Now you should be able to traverse to the text table ZABCT from ZABC (menu path: Goto->Text Table)
Hope this will help.
Regards,
Nishit

How to create text fields & assign values form sql in ADF

Hi all,
I am new to oracle ADF,
i want know how to create text fileds and how to assign the values to those fields from plsql.
Regards
Prakash

http://technology.amis.nl/blog/3315/creating-an-adf-application-based-on-plsql-api-part-one-reading-data-as-a-collection-of-sql-type-objects
Hope this will help.
~Krithika

How to create folder names based on Excel values or Txt files?

Hi there,
I often need to create large numbers of folders based on names I have saved in an Excel spreadsheet. I know in windows there is a way to create a macro within excel that automatically generates folder names based on cell values.
I was therefore wondering how to do the same on a Mac operating system. The main thing is to find a way to automate the process. I understand this may involve copying the values to a text file.
Below is an example of the names I need to create folders for (copied from the excel spreadsheet):
Wash Bowl Small 600
Deck Mounted Wash Bowl 500
Wash Basin - 866 - 2 Shelves
Wash Bowl Large 800
Built-In Wash Basin With 1-Taphole
Deck Mounted Wash Bowl 625
Would really appreciate a simple step by step approach to an explanation. As my understanding of using Automator, Apple Script, Terminal, etc, is extremely basic.
Thanks and Best Wishes,
Graham

Hi Niel,
Thanks again for another superb response. I have another question. Is it possible to automatically generate sub-folders along with the folder.
For example:
Folder                                                Subfolder
Wash Bowl Small 600          >            2D CAD
                                                           3D CAD
                                                           BIM
                                                           Images
                                                           Brochures
                                                           Specifications
                                                           Technical
                                                           Case Studies
                                                           Operations
Deck Mounted Wash Bowl 500    >   2D CAD
                                                          3D CAD
                                                          BIM
                                                          Images
                                                          Brochures
                                                          Specifications
                                                          Technical
                                                          Case Studies
                                                          Operations
Above shows the 9 generic sub-folders I need to create within each folder that is generated.
Best Wishes,
Graham

How to create an object within the same class???

hi im just a newbie
i v been always creating an object from the main class..
but how to create an object inside the same class??
i got main and students class
the main got an array
Students[] stu = new Students[]
and i got
stu[i] = new Students(id,name);
i++;
but i wanna do these things inside the Students class..
i tried ..but i got errors.....
how to do this
.

javaexpert, :)
I really have no idea what you are trying to do since you say you've always been creating an object from the main class, yet you always want to create an object inside the same class.
I'll assume that you have an object in the main class that you are trying to access from the Students class.
If you are trying to access objects that are contained within the main class FROM the Students class, then know that there are two ways of doing so, one being static, and the other dynamic (look up definitions if unclear):
1.) make the objects in the main class both static and public and access the the objects using a convention similiar to: Main.object; It's important to note that Main is the name of your main class, and object is a static object. There are better ways of doing this by using gettter/setter methods, but I'll omit that tutorial.
2.) Create a new instance of the main class and access the objects using a similiar fashion: Main myInstance = new Main(); myInstance.myObject;
You should really use getter and setter methods but I'll omit the code. In terms of which approach is better, step one is by far.
I don't mean to be condecending, but you should really brush up on your programming skills before posting to this forum. This is a fundamenetal concept that you will encounter time and time again.

How to get text name text object and text id for long text

Hi,
I am trying to fetch Long text for a given order number from transaction CO04 in SAPScript. I know that I have to use Include X (OBJECT) XX ID XXX.
How do I get the text name, text object and text id for the order header long text from Transaction CO04.
Points will be awarded..
Tushar

Tushar,
When you are in CO02, and are at the Long Text Tab,click on the Icon that is next to the Order Number at the top of the screen (this icon looks like a Pencil and a Pad of Paper and is called "Change Long Text"). When you click on this it will take you to the SAPscript Editor. Now hit Goto->Header and you will get the data you require.
Hope this helps.
Cheers,
Pat.
PS. Kindly award Reward Points as appropriate.

How to create Text Variables in BEx Query Designer

How can i create Text Variables in Bex Q.D.
I am able to create characteristic variables
but i can't find option to create text variables.
What's the requirement to create Text variables in Bex Q.D.
When i try to create Text variable for 0calDay.. the variable type is characteristic by Default and disabled.
How can i create text variables related to 0CalDay with which i need to work in Customer Exit.

Hi,
You have to create characteristic variable processing by Customer Exit by considering 0CalDay as a Reference Characteristic
After creation of the above variable, you restrict your KF with the above created variable.
Now you can create a Text variable for the description of your KF. This way it works...........
Regards,
Suman

How to create text buttons that link to video?

I've finally gotten around to trying DVD SP, and even though I read the whole manual, it's not at all clear if, or how, you can create text buttons that link to the video you want to play, without displaying a clip of that video in the button itself.
I have no problem creating a text button, but I can't change the font, and editing is counter-intuitive, unlike iDVD. I'd use iDVD, but it doesn't accept .m2v files, and it seems to think that my 6 videos of about 43 minutes each are too large for a DVD+DL disc, so it won't let me burn it or save it as a disc image.
Does anyone have a way out of this conundrum, or am I SOL?
Mulder

It really isn't that hard!
As Drew said, go into your menu and click and drag to create a button rectangle. With the button highlighted, look in the property inspector at the bottom and type in the text that you want to use. Ensure that you 'include in button highlight' and then set the colour choice for selected and activated.
What you get is a simple line of text which illuminates when you roll over it, and changes colour when you click on it.
Once that is done, click on the button area again and set the target to go to the piece of video that you want to have play back.
You should also set the menu call and end jump on that track to make sure your viewer can get back to the menu.
Once that is done the menu will show as a simple piece of text (more buttons means more bits of text, and the first button will be highlighted by default) and no video will play until the button is activated.
DVDSP is definitely a steeper learning curve than iDVD but for very good reasons. You get far greater control and access to far more advanced features in DVDSP. This means that some things will seem harder, whereas in fact they are just different and the process for achieving the result you want is different. Much of what you want to know is in the manual and also in the tutorials which came with the app. Failing that there are several good online spaces where you can find a lot more information... not least of which is right here, of course!

How to create multiple objects within a class

I have a item.lvclass which has an item.ctl (contains a cluster of class private data). I need to add another object (item2.ctl) within that same class so that I can reuse the code for that class.
So how do you create additional objects within the same class?

Well... right now... I've cornered myself going down this path: http://forums.ni.com/t5/LabVIEW-Idea-Exchange/LVOOP-Interfaces/idc-p/1314637#M8918
Seems like the solution in the idea was not implemented yet....
Okay. I will try to describe the situation differently...
Let's say I have a Car.lvclass
I want to have two objects: sedan & roadster
both have similar properties, but also have different properties:
4 doors vs 2 doors
hardtop vs convertible
silver vs white (color)
I want the two objects to be of the same class so that they can share the same private and public VI's. As a matter of fact, I want to have both objects in the VI's within the Car.lvclass.

How to create text vertically in ADOBE FORMS?

Hi all,
I need to create text in vertical position in ADOBE FORMS? How to do this..
<< Removed >>
Thanks
Devinder
Edited by: Rob Burbank on Mar 3, 2010 1:40 PM

I will recommend you to use smart forms ...
the link below has the said topic discussed for smart forms ...
Printing vertical text in Smartform
Also there is a New tool called Adobe Flex whose integration with SAP is being discussed and worked upon in experimental stage .. the said tool has vertical text capability
but its not recommended because of lack of extensive testing with regards to Association with SAP
BR
Manthan.
PS it can be done in sapscript too but i will not recommend the same bcoz of the obvious trouble in doing the same.
also if u still want to stick to sapscript
Simple way is to use layout format like "X_65_80" or "X_90_120"
Edited by: Manthan_R on Mar 4, 2010 6:24 AM

How to write text name of parameters / select options in ABAP list??

Hi gurus, i must read the text name of parameterd / select options in ABAP program and write it in a list of the same program for log.......how can i do it??
Thanks in advance!
Best regards!
Ferdinando
Message was edited by:
Ferdinando Sellitto

Hello Ferdinandino
Useful function modules are:
RS_PRINT_SELECTIONS
RS_LIST_SELECTION_TABLE (Generates list according to values in selection table(RSPARAMS))
RS_REFRESH_FROM_SELECTOPTIONS (Current contents of selection screen)
Function module RS_REFRESH_FROM_SELECTOPTIONS can provide the input for function module RS_LIST_SELECTION_TABLE.
Regards
Uwe

How to create text file of report in 10g

Hi,
I want to create text file of report in character mode and print that text file, without view it on screen.
i want to do this in Oracle developer 10g and run this report on web.
what coading i required to do for this pls. help me.

Hello,
Execute the Reports with the parameters MODE=CHARACTER DESTYPE=PRINTER DESNAME=<printer name>
Regards

How to create tick marks within an arched area

I need to recreate this dial and I've learned how to create evenly spaced tick marks within a circle, but this is an ellipse. Here, I attempted to draw two ellipse then used the scissors to cut them to size. Then I used the line tool and drew each of the tick marks. Then I adjusted the weights of each tick. This is not a good method because the end ticks are not meeting the ends of the ellipse perfectly, leaving a tiny bit of tick mark outside the ellipse. There must be a better way to do this. Here is what I ended up with:
But this is what I need to create:
(I only need to create the arched part with tick marks of this dial)
Any help is appreciated, but please note that I am familiar with only the very basics of illustrator, I simply don't do this type of work often enough to completely understand the software.
Thanks!!!!

Jber,
And this is an attempt to give a (hopefully sufficiently) more complete description of the ellipse way, as an amendment of post #4 (overdoing silly things like this makes it difficult to remember to mention all the crucial steps that seem to hide somewhere in the fingers):
One way that results in constant thickness tick marks might be to (using Stroke>Round Cap/Join or Stroke>Projecting Cap/Miter Join or Stroke>Butt Cap and Miter Join depending on the desired end shape and length, see below, with the layer expanded in the Layers palette, and Smart Guides are your friends, telling you when you when you are in the right spots):
If you wish to have the tick marks follow an ellipse and at the same time have constant widths (two different widths), you may (see below):
0) Lock the image of the dial (shown as a grey area below), you may place it at X = 0 to facilitate symmetric building;
1) Create the thickest tick mark and move a copy to the right, then create a one step blend (Object>Blend Options>Specified Steps = 1, then Object>Blend>Make);
2) Create the thinnest tick mark and move a copy to the right, then create a five steps blend (Object>Blend Options>Specified Steps = 5, then Object>Blend>Make);
3) Either of two ways (in both cases make sure to make it as symmetrical as possible):
3a) Create the midway ellipse, adjusting the top of it to be midway between the two arcs (this is the first way I thought of and the way shown below), or
3b) Create two ellipses corresponding to the two arcs, then create a one step blend and Object>Blend>Expand to get the midway ellipse and delete the other two;
4) Drag horizontally with the Line Tool (hold Shift) to make a path between the two spots where the midway ellipse crosses the ends of the dial image (Smarts Guides say intersect), or just create a horizontal path and place it so it crosses the ellipse in the right spots (you can see the symmetry here);
5) With the horizontal path still selected Object>Path>Divide Objects Below;
6) Delete the lower superfluous part of the ellipse, then with the Direct Seletion Tool click the horizontal segment and delete it (only click delete once);
7) Select the remaining midway ellipse part and Object>Path>Offset Path, using half the height of the dial image (at the middle), you may retry until you have it right, this will recreate the top and bottom of the dial and also make ends;
8) Select the midway ellipse part and Object>Path>Add Anchor Points a few times (see below), and copy the midway ellipse, now you have two on top of each other, one for each of the blends;
9) Select one of the midway ellipses along with the thin blend from 2) (hold Shift to have them both selected) and Object>Blend>Replace Spine, this will make that ellipse part disappear;
10) Select the other midway ellipse and the thick blend from 1) (hold Shift to have them both selected) and Object>Blend>Replace Spine;
11) Hide/Delete the image dial.
Now you should have the whole dial with both sets of tick marks on top of the elliptic arch set. In 9) and 10) you may select on the Artboard or through the Layers palette (you can see what you are selecting in both places), and the order (and stacking order) in 1)/2) and 9)/10) can be changed.
If you wish to move/extend the thick tick marks upwards or both up and down, you may:
12) Select the thick ticks blend and Object>Blend>Expand, and then Select each of the thick tick marks and tick the appropriate Reference Point in the Transform palette (if you want to extend upwards use the bottom ones (Right for left, Center for centre, Left for right), if you want to extend both up and down use the Center one), then multiply the H value by the desired amount and click Ctrl/Cmd+Enter to make them a bit longer up/outwardly.
The Object>Path>Add Anchor Points in 8) is to get a even distribution of the thin tick mark blend (not necessary for the thick tick marks blend because it only has one step).

How to create text names within a number or shape

Similar Messages

Maybe you are looking for