How to create textpool by using standard function module?

hi,
gurus.
I have find two function modules ( RS_TEXTPOOL_READ / BX_AGR_READ_TEXTPOOL ) which is used to read but i want to write into the textpool is there any standard function module

REPORT ZTEST1.
WRITE : / 'ddddddd'.
WRITE : / 'ddddddd'.
WRITE: / 'hhhhhhh'.
WRITE: / 'ddddddd'.
WRITE: / 'ddddddd' , 'uuuuuuuu'.
WRITE: / 'ddddddd', 'sssssssss'.
for example i am this report i want to convert it into text elements like
REPORT ZTEST1.
WRITE : / 'text-001'.
WRITE : / 'text-001'.
WRITE: / 'text-002''.
WRITE: / 'text-001''.
WRITE: / 'text-001'' , 'text-003''.
WRITE: / 'text-001'', 'text-004'.
this elements also store into the textpool so how can we achieve this functionality by using standard function module.
can any body give some idea .
shabeer ahmed

Similar Messages

How to create textsymbols by using satndard function module?

Hi.
Guru's.
There is a report in which at first i can read textpool of a another program through standard function module ( RS_TEXTPOOL_READ / BX_AGR_READ_TEXTPOOL ) and i don't know how to insert textsymbols into the textpool after reading through standard function module.
shabeer ahmed.

Hi,
Please check this link..
http://help.sap.com/saphelp_nw04/helpdata/en/d6/0db9bf494511d182b70000e829fbfe/frameset.htm
Hope this would help you.
Good luck
Narin

How to create customer By using SD_CUSTOMER_MAINTAIN_ALL function module

Hello all,
I want to create customer By passing( T_CUST_HIER_IP - customer no, account group, company code, distribution channel, division, name1, search team, city, country).
using BAPI or function module I am using SD_CUSTOMER_MAINTAIN_ALL
LOOP AT T_CUST_HIER_IP INTO W_CUST_HIER_IP.
    MOVE-CORRESPONDING W_CUST_HIER_IP TO W_KNA1.
    MOVE-CORRESPONDING W_CUST_HIER_IP TO W_KNB1.
    MOVE-CORRESPONDING W_CUST_HIER_IP TO W_KNVV.
CALL FUNCTION 'SD_CUSTOMER_MAINTAIN_ALL'
   EXPORTING
     I_KNA1                              = W_KNA1
     I_KNB1                              = W_KNB1
     I_KNVV                              = W_KNVV.
ENDLOOP
But it gives error SALES_AREA_NOT_VALID.

Hi,
   Check in TVKO and TVTA master tables, for Sales Area (Sales OrganizationDistribution ChannelDivision) is vaild or not..
   If no entreis availble , it will raise the exception SALES_AREA_NOT_VALID.
-somesh
reward points if it is helpful

How to capture error message from standard function module

Dear friends
when i execute standard function module in finance , i am getting error message , pls check the below screen shot,
how to capture the below error message so that i have display in my webdynpro component
Thanks
Vijaya

Hello Vijaya,
Incase of BAPI's they have a return table parameter T_RETURN. Just read that return table to get the error message.
Incase of normal function modules, there will be exceptions raised for the message used inside the function module. Just read the sy-subrc after the FM and based on the sy-subrc value find the respective exception raised.
May be you can try like this, whenever the message is raised it will be stored in the system variable.
CALL FM.
check for the system variables.
sy-msgid = Message ID of the latest message raised.
sy-msgno = message number of the latest message raised.
sy-msgty = message type of the latest message raised.
sy-msgv1 = variable1 of the latest message raised.
sy-msgv2 = variable2 of the latest message raised.
sy-msgv3 = variable3 of the latest message raised.
sy-msgv4 = variable4 of the latest message raised.
Regards,
TP

How to create a generic datasource from function module?

Dear experts,
I have created a generic datasource from function module. For this extrator, I created a function module and a structure.
I have now some difficulties to continue:
In this function module, i get data from different transparent tables. Then i put these data into an internal table.
I just don't know what is the relatioin between the structure i defined and this internal table.
I should make "iTab structure AA" in the source code?
Thanks

Hi..
check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
1. Create s structure with the fields that you need from the 4 tables . Activate.
2. Goto SE 80 Select The Function Group , Copy , Select the Function module
" RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
Y or Z .
3. SE37 ->Your Function module name -> Change , In table tab give your structure
name by deleting the associated type given in " XXXX " .
4. Now select source code and Do the coding . Give Data source name in Coding .
In your case you have to take data from more that 1 table .
5. Activate the Function Group .
6. In RSO2 Create the Data source , Give the Function Module Name , And Save.
7. RSA3 -> Give data source name and Check for the Records .
Creation of custom datasource. (Using function module)
.Create a function group .
. Structure ZTXXXX
Create function module (i.e. ZTESTXXX) .
. Create the data source using transaction (RSO2).
. If structure exists for the table parameter of your function module then ok else create a structure for the table parameter .
Test the datasource in R/3 using transaction RSA3.
Transfer the data source to BW System and replicate it in the BW-System.
Message was edited by:
shiv

How to find Job relationship using the Function Module RH_STRUC_GET

Hi Experts,
I am getting O-S-P relation ship using for an org unit using the function module RH_STRUC_GET.
Further If I want the job relation ship, how it can be found out.
Thanks in Advance,
Irfan

Hello Irfan,
Have a look at the table T778A for evaluation path you require and pass this to the function module.
Regards,
Manoj.

How to create a generic data extractor using standard function module

Hi,
I have to generate report based on Function module(standard FM),client know only Fm Name n they have given FM Name n asked reports based on that, so can any one give me steps to create DS based on that.
Thanks,
Swapna

check this blog
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
and this pdf:
Generik extraction: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
Generic delta:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Edited by: Aduri on Dec 17, 2007 4:04 PM

How to create depedent lov using groovy functionality

Hi,
My requirement is need to create dependent LOV on form like, when ever user selects merchant_number, remaining merchant details should default, till now i am doing with valuechange listener. now i wanted to do on vo itself using groovy functionality. i have created merchant VO which is returning 4 values, merchant_number,name,phone,address. i have created view criteria with a bind variable.
In my main vo i have created LOV for merchant_number. added the merchant vo as view accessor and set the bind variable value as merchant number. and with the merchant_name i am trying to setting as XxwfsMerchantDetailsLOV1.getMerchantName(). i am getting error like
Exception in thread "AWT-EventQueue-0" oracle.jbo.JboException: JBO-29000: Unexpected exception caught: groovy.lang.MissingMethodException, msg=No signature of method: oracle.jbo.server.ViewRowSetImpl.getMerchantName() is applicable for argument types: () values: []

hi,
for creating LOV i don't have any issue, problem with defaulting the remaining fields. i am getting error like
Exception in thread "AWT-EventQueue-0" oracle.jbo.JboException: JBO-29000: Unexpected exception caught: groovy.lang.MissingMethodException, msg=No signature of method: oracle.jbo.server.ViewRowSetImpl.getAttribute() is applicable for argument types: (java.lang.String) values: [MerchantName]
at oracle.jbo.ExprEval.internalEvaluateGroovyScript(ExprEval.java:833)
at oracle.jbo.ExprEval.doEvaluate(ExprEval.java:868)
at oracle.jbo.ExprEval.evaluateForRow(ExprEval.java:762)
at oracle.jbo.server.AttributeDefImpl.evaluateTransientExpression(AttributeDefImpl.java:2029)
at oracle.jbo.server.ViewRowStorage.initDefaultExpressionAttributes(ViewRowStorage.java:930)
at oracle.jbo.server.ViewRowStorage.create(ViewRowStorage.java:1154)
at oracle.jbo.server.ViewRowImpl.create(ViewRowImpl.java:428)
at oracle.jbo.server.ViewRowImpl.callCreate(ViewRowImpl.java:445)
at oracle.jbo.server.ViewObjectImpl.createInstance(ViewObjectImpl.java:4915)
at oracle.jbo.server.QueryCollection.createRowWithEntities(QueryCollection.java:1843)
at oracle.jbo.server.ViewRowSetImpl.createRowWithEntities(ViewRowSetImpl.java:2368)
at oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:2409)
at oracle.jbo.server.ViewRowSetImpl.createAndInitRow(ViewRowSetImpl.java:2374)
at oracle.jbo.server.ViewObjectImpl.createAndInitRow(ViewObjectImpl.java:9684)
at oracle.jbo.jbotester.NavigationBar.doInsertAction(NavigationBar.java:136)
at oracle.jbo.jbotester.NavigationBar.doAction(NavigationBar.java:109)
at oracle.jbo.uicli.controls.JUNavigationBar$NavButton.actionPerformed(JUNavigationBar.java:117)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.Component.processMouseEvent(Component.java:6263)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6028)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2475)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)

How to creat web service for a function module?

who can provide me some resource on the topic.
thanks
Johnney.

Hi John,
http://help.sap.com/saphelp_nw04/helpdata/en/e9/ae1b9a5d2cef4ea4b579f19d902871/content.htm
Reward Points if Useful
All the Best
Gokul

Is it necessary to use the standard function modules always?

Hi All,
Suppose i can retrieve the BUSINEES PARTNER ID from the table BUT000 with the help of 'BP_GUID' field through a select query statement.
Now is it necessary to use a standard function module to retrieve the same data. what about the performance? which is the better solution. to implement our own code or to use the function module available.
Please someone clarify me about this issue.
Regards,
Sharry.

If you'd ask the question in general it's obvious that there is no good answer as it always would depend on the circumstance. However, as you've posted your question in the performance tuning forum, let's look at your question in this context first. I think it's fairly safe to say, that in almost 100% of the cases a standard function module will not be as fast as any well implemented and custom tailored code. If in doubt, just try reading the code of the function module you want to read; most likely you will find lots of unnecessary fluff in there, often they read data that you don't even need.
And as far as buffering is concerned, that can also be an issue. E.g. let's say you do a massive read of distinct business partners and you only need the data once for each partner. Obviously buffering is silly in this case and it might even slow down your program, because the implemented buffering is not necessarily well implemented. I've come across a few cases, where the buffer tables where standard tables with no efficient read access (so no sorted table or hash table) and once tons of data were buffered, it actually took a moment to look up if the record already was buffered (just to find it wasn't there yet).
Now most of the times this slowdown is not an issue as the lookup is still fast compared to the (usually) prevalent database accesses with their slower IO timing. But another factor to consider is memory consumption and why buffer data in memory (and waste it), if you can't use the buffer anyway? So when I do use standard function modules, I usually try to see what they retain in global memory, to better understand if I need to call some initialization/clearing/refresh function...
Note also that often you need to process lots of data, but don't find a standard function module for "mass access", so you need to read your object one by one. Obviously that's another good candidate for implementing your own queries, where you can process the data in packages.
So what might be the reason to use a standard function module? Well, often it's required because the logic is so complex that it would take you too much time to implement it (not to mention that we often simply don't know all the logic that's coded in there). Another advantage is that you might get independent of the data model. E.g. for IDoc interfaces SAP switched in some release the tables where the data is stored. So if you had coded your own queries to get IDoc data, they wouldn't have worked after this particular release upgrade. The standard function on the other hand, checks both the old and new tables, so by using it you would have been fine.
The one major caveat I'd give though is to always check whether the function module is released or at least documented to some degree. I.e. if it's not released, SAP won't support it and does not guarantee that the interface or logic stays the same. In my experience lots of functions I do want to use are not released (or documented), but I will still use them because they seem to be the best alternative in certain scenarios.
Cheers, harald

How to insert WorkBench Request to a domain using a function Module...

Dear ALL,
                    I am creating a program where I have created a domain using a Function Module and assigned the same domain to a package using a Function Module. Now I want to assign the domain to a WorkBench Request...Can anyone tell me of a Function Module to achieve the same??? Please note that the WorkBench Request is entered by the user on the Selection-Screen.
Moderator message: please do not open multiple threads for the same issue, rather follow up (or bump up) on existing ones.
Edited by: Thomas Zloch on Dec 15, 2010 1:18 PM

Hi Anjali,
Thanks for the response.
I have passed the PSGNUM and HLEVEL values while populating the data records. Then I sent the data records and control record information to the function module IDOC_INBOUND_WRITE_TO_DB. Inside this function module there is code to clear the PSGNUM values and HLEVEL values.
for compatibility: clear administration data of data records
           perform data_records_wipe
                                  tables
                                      t_data_records.
FORM DATA_RECORDS_WIPE
                  TABLES
                      T_DATA_RECORDS_IN STRUCTURE EDIDD.
LOOP AT T_DATA_RECORDS_IN.
    CLEAR: T_DATA_RECORDS_IN-MANDT,
           T_DATA_RECORDS_IN-DOCNUM,
           T_DATA_RECORDS_IN-SEGNUM,
           T_DATA_RECORDS_IN-PSGNUM,
           T_DATA_RECORDS_IN-HLEVEL.
    modify t_data_records_in.
ENDLOOP.
ENDFORM.                               " DATA_RECORDS_WIPE
This is the code which is clearing all the PSGNUM and HLEVEL values. After coming out of this function module we are getting the error idocs created with disturbed hierarchy.
I need to create INBOUND Idocs with the data in ABAP program.
Please let me know if any inputs? Is there any function module existing to create Inbound Idocs inside an ABAP program?
Regards

How to pass BI Query parameters from Function Module

Hi,
We are executing the BI queries using the Function Module "RS_VC_GET_QUERY_VIEW_DATA_FLAT" by passing the query name and the provider information.
Is there a way, to pass the filter parameter values also to the query by using this function module? I am not sure how the VC tool is using this Function Module to call the BI queries and passing the filter values.
Your help is appreciated.
Thanks
Suri

Suryanarayana,
Are you trying to execute a query in batch?. If you want to execute try to look at WRITEQUERY - which is a standard SAP program. You can execute this program directly or you can customize it completely and produce the output in .CSV file.
Hope this helps. Award points if useful.
Goodluck,
Alex (Arthur Samson)

How to use standard function keys as custom keys

how to use standard function keys as custom keys.
i have encountered that problem while developing a screen, there i'm supposed to use standard function key F2 ( which actually meant for choose) for clearing the screen fields where the cursor is present and f1 for saving data that entered in screen fields, etc...
kindly help me out.

Hi ,
Solution to use SAP reserve function keys F1 .. F4 (mostly this requirement comes up for RF screens) can be acheived by assigning your new Function code using the Menu path Utilities --> F key Consistency in the Menu Painter (SE41) . Once you assign your cutom function code to the standard Fn keys the only remaining step is to make sure that you set a curson on any of the field on sceen by using the Key Word "SET CURSOR" .
If you dont use the key word SET CURSOR in the PBO of the screen then you might not see any response for F4.
Thanks

How to create transport request for standard text created using SO10.

Hi,
How to create transport request for standard text created using SO10?
Regards
Ramakrishna L

Hi,
For the Standard text created in SO10,
please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
Double click on ADRS or ST or what ever your type of text->
Enter your standard text name
Click on transport button->SHIFT+f6-> It will ask you for a transport request.
Best regards,
Siva

How to create purchase order using VA01 for BAPI?

how to create purchase order using VA01 for BAPI?

Hi Arun,
Please check this link
Example Program for BAPI_PO_CREATE1
Re: BAPI_PO_CREATE1
Questions in BAPI_PO_CREATE1
Problem with BAPI_PO_CREATE1
*& Report BAPI_PO_CREATE *
REPORT bapi_po_create.
Input File Declaration
TYPES: BEGIN OF ty_input_file,
column1 TYPE char50,
column2 TYPE char50,
column3 TYPE char50,
column4 TYPE char50,
column5 TYPE char50,
column6 TYPE char50,
column7 TYPE char50,
column8 TYPE char50,
column9 TYPE char50,
column10 TYPE char50,
column11 TYPE char50,
column12 TYPE char50,
column13 TYPE char50,
column14 TYPE char50,
column15 TYPE char50,
column16 TYPE char50,
column17 TYPE char50,
column18 TYPE char50,
END OF ty_input_file.
DATA: i_input_file TYPE STANDARD TABLE OF ty_input_file,
wa_input_file TYPE ty_input_file.
CONSTANTS: c_path TYPE char20 VALUE 'C:\',
c_mask TYPE char9 VALUE ',.,..',
c_mode TYPE char1 VALUE 'O',
c_filetype TYPE char10 VALUE 'ASC',
c_x TYPE char01 VALUE 'X'.
PARAMETERS : p_fname LIKE rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
Browse Presentation Server
PERFORM f4_presentation_file.
START-OF-SELECTION..
Read presentation server file
PERFORM f1003_upload_file.
IF NOT i_input_file[] IS INITIAL.
PERFORM split_data.
ENDIF.
*& Form f4_presentation_file
*& F4 Help for presentation server
FORM f4_presentation_file .
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_path = c_path
mask = c_mask
mode = c_mode
title = text-001
IMPORTING
filename = p_fname
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_presentation_file
*& Form f1003_upload_file
*& Upload File
FORM f1003_upload_file .
DATA: lcl_filename TYPE string.
lcl_filename = p_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = lcl_filename
filetype = c_filetype
has_field_separator = c_x
TABLES
data_tab = i_input_file
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
ENDFORM. " f1003_upload_file
*& Form split_data
Collect data for creating Purchase Order
FORM split_data .
DATA: i_poitem TYPE STANDARD TABLE OF bapimepoitem,
i_poitemx TYPE STANDARD TABLE OF bapimepoitemx,
i_poitem_sch TYPE STANDARD TABLE OF bapimeposchedule,
i_poitem_schx TYPE STANDARD TABLE OF bapimeposchedulx,
i_acct_*** TYPE STANDARD TABLE OF bapimepoaccount,
i_acct_assx TYPE STANDARD TABLE OF bapimepoaccountx,
i_services TYPE STANDARD TABLE OF bapiesllc ,
i_srvacc TYPE STANDARD TABLE OF bapiesklc,
i_return TYPE STANDARD TABLE OF bapiret2,
wa_header TYPE bapimepoheader,
wa_headerx TYPE bapimepoheaderx,
wa_poitem TYPE bapimepoitem,
wa_poitemx TYPE bapimepoitemx,
wa_poitem_sch TYPE bapimeposchedule,
wa_poitem_schx TYPE bapimeposchedulx,
wa_acct_*** TYPE bapimepoaccount,
wa_acct_assx TYPE bapimepoaccountx,
wa_services TYPE bapiesllc,
wa_srvacc TYPE bapiesklc,
wa_return TYPE bapiret2,
ws_po TYPE bapimepoheader-po_number.
break gbpra8.
wa_services-pckg_no = 10.
wa_services-line_no = 1.
wa_services-outl_no = '0'.
wa_services-outl_ind = c_x.
wa_services-subpckg_no = 20.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = 10.
wa_srvacc-line_no = 1.
wa_srvacc-serno_line = 01.
wa_srvacc-serial_no = 01.
wa_srvacc-percentage = 100.
APPEND wa_srvacc TO i_srvacc.
LOOP AT i_input_file INTO wa_input_file.
IF wa_input_file-column2 EQ 'HD'.
wa_header-doc_type = wa_input_file-column3.
wa_header-creat_date = sy-datum.
wa_header-created_by = sy-uname.
wa_header-vendor = wa_input_file-column4.
PERFORM conversion_output USING wa_header-vendor
CHANGING wa_header-vendor.
wa_header-comp_code = 'DE03'.
wa_header-purch_org = 'DE03'.
wa_header-pur_group = 'DE1'.
wa_header-vper_start = wa_input_file-column9.
wa_header-vper_end = wa_input_file-column10.
wa_headerx-comp_code = c_x.
wa_headerx-doc_type = c_x.
wa_headerx-creat_date = c_x.
wa_headerx-created_by = c_x.
wa_headerx-vendor = c_x.
wa_headerx-purch_org = c_x.
wa_headerx-pur_group = c_x.
wa_headerx-vper_start = c_x.
wa_headerx-vper_end = c_x.
ENDIF.
IF wa_input_file-column2 EQ 'IT'.
wa_poitem-po_item = wa_input_file-column3.
wa_poitem-short_text = wa_input_file-column6.
wa_poitem-plant = wa_input_file-column8.
wa_poitem-quantity = '1'.
wa_poitem-tax_code = 'V0'.
wa_poitem-item_cat = 'D'.
wa_poitem-acctasscat = 'K'.
wa_poitem-matl_group = wa_input_file-column7.
wa_poitem-pckg_no = '10'.
APPEND wa_poitem TO i_poitem .
wa_poitemx-po_item = wa_input_file-column3.
wa_poitemx-po_itemx = c_x.
wa_poitemx-short_text = c_x.
wa_poitemx-plant = c_x.
wa_poitemx-quantity = c_x.
wa_poitemx-tax_code = c_x.
wa_poitemx-item_cat = c_x.
wa_poitemx-acctasscat = c_x.
wa_poitemx-matl_group = c_x.
wa_poitemx-pckg_no = c_x.
APPEND wa_poitemx TO i_poitemx.
wa_poitem_sch-po_item = wa_input_file-column3.
wa_poitem_sch-delivery_date = sy-datum.
APPEND wa_poitem_sch TO i_poitem_sch.
wa_poitem_schx-po_item = wa_input_file-column3.
wa_poitem_schx-po_itemx = c_x.
wa_poitem_schx-delivery_date = c_x.
APPEND wa_poitem_schx TO i_poitem_schx.
wa_acct_***-po_item = 10.
wa_acct_***-serial_no = 01.
wa_acct_***-gl_account = '0006360100'.
wa_acct_***-co_area = '1000'.
wa_acct_***-costcenter = 'KC010000'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_***-po_item = 10.
wa_acct_***-serial_no = 02.
wa_acct_***-gl_account = '0006360100'.
wa_acct_***-co_area = '1000'.
wa_acct_***-costcenter = 'KC010000'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_assx-po_item = 10.
wa_acct_assx-serial_no = 01.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
APPEND wa_acct_assx TO i_acct_assx.
wa_acct_assx-po_item = 10.
wa_acct_assx-serial_no = 02.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
APPEND wa_acct_assx TO i_acct_assx.
wa_services-pckg_no = 20.
wa_services-line_no = 2.
wa_services-service = wa_input_file-column9.
wa_services-quantity = '100'.
wa_services-gr_price = '100'.
wa_services-userf1_txt = wa_input_file-column13.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = 20.
wa_srvacc-line_no = 1.
wa_srvacc-serno_line = 02.
wa_srvacc-serial_no = 02.
wa_srvacc-percentage = 100.
APPEND wa_srvacc TO i_srvacc.
ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = wa_header
poheaderx = wa_headerx
POADDRVENDOR =
TESTRUN =
MEMORY_UNCOMPLETE =
MEMORY_COMPLETE =
POEXPIMPHEADER =
POEXPIMPHEADERX =
VERSIONS =
NO_MESSAGING =
NO_MESSAGE_REQ =
NO_AUTHORITY =
NO_PRICE_FROM_PO =
IMPORTING
exppurchaseorder = ws_po
EXPHEADER =
EXPPOEXPIMPHEADER =
TABLES
return = i_return
poitem = i_poitem
poitemx = i_poitemx
POADDRDELIVERY =
poschedule = i_poitem_sch
poschedulex = i_poitem_schx
poaccount = i_acct_***
POACCOUNTPROFITSEGMENT =
poaccountx = i_acct_assx
POCONDHEADER =
POCONDHEADERX =
POCOND =
POCONDX =
POLIMITS =
POCONTRACTLIMITS =
poservices = i_services
posrvaccessvalues = i_srvacc
POSERVICESTEXT =
EXTENSIONIN =
EXTENSIONOUT =
POEXPIMPITEM =
POEXPIMPITEMX =
POTEXTHEADER =
POTEXTITEM =
ALLVERSIONS =
POPARTNER =
break gbpra8.
LOOP AT i_return INTO wa_return.
ENDLOOP.
ENDFORM. " split_data
*& Form conversion_output
Conversion exit input
FORM conversion_output USING p_ip
CHANGING p_op.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = p_ip
IMPORTING
output = p_op.
ENDFORM. " conversion_output
Best regards,
raam

How to create textpool by using standard function module?

Similar Messages

Maybe you are looking for