How to create the Change Advisory Board business partner?

Dear SolMan Gurus.
How can I create a business partner Change Advisory Board and add a members to it?
Thank you.
Petr

Hi Petr,
just to make it a bit more clear, the Change Advisory Board (CAB) is not a type of a business partner, but a partner function. So you just need to create a standard business partner, e.g. an organizational unit as Prakhar suggested. Later on in your change document you can assign this org unit to the CAB-function. In another document the same org unit can be another partner function.
If you want to enter a fix CAB-partner for a system you can do this in IBASE, transaction IB52. There are a lot of customizing possibilites for the determination of business partners.
Kind regards,
André
Edited by: André Urban on Jun 2, 2009 11:54 AM
Edited by: André Urban on Jun 2, 2009 11:55 AM

Similar Messages

How to create the change document functionality for a dependent objects?

May I please know how to create the change document functionality for a dependent objects?
I have done it follow the same process as for business process objects. But when i try to test it in BOBT, there is no records under "FIELD_CHANGE_WITH_FILTER". It seems the change hasn't been recorded.
If the way I did to create change document for dependent object is correct, please also kindly advise the possibilities for why there is no record during testing.
thanks in advance.

I also have some doubts about the business object.In this case,one abstract BO hase a subnode wihich is root extended.I added the change document for this node under the category "root_extended" and then tested the function in BOBT.I got some error message "can't find the root key".Shall i redefine the method /BOFU/IF_CDO_CREATION~IS_CDO_CREATION_ACTIVE so as to solve the problem?
Thx.

How to maintain the contact person in Business Partner ?

Hi Experts,
Could you help to resolving the below Requirement.
__ +Requirement:+__
How to maintain the contact person in Business Partner ?
How to get the Contact person in Is-Media Documents?
Thanks& Regards
Venkat

Dear Venkat,
In SD Customer Master data, we can maintain Contact Person in General Data tab page.
For my knowledge, we can not find u201CContact Personu201D field in ISM Business Partner u2013 General Data. Correct me if I am wrong.
Mostly user enters the contact person details in u201CSearch Term 1/ 2 fieldu201D in Address tab page in ISM Business Partner u2013 General Data tab page. While creating ISM Billing Document for this Business Partner, system prints this contact person details in ISM Invoices.
(Or)
While creating ISM Order, user can maintain Contact Person name in Header Details(Click on u201CGo to >Header>Details>Purchase Order Data>Cont.Person)
If you maintain Contact Person name in Header Details also, system print this contact person details in ISM Invoices.
Check from your end.
Best Regards,
Chandramohan

How to Create an activity based on business partner

hi guys,
Can any body help regarding the below scenario.
1) Creation an business partner.
2) create an acitvity based on business partner.
3) Create an lead and opputunity based on business parter.
What are the function modules should we used to create the above three steps consequently.
I need the function module for creation of BP , ACTIVITY,
LEAD,OPPURTUNITY.
Regards
Viswa Guntha

Hi,
For creating a business partner, use the FM
BAPI_BUPA_CREATE_FROM_DATA.
For creating lead, opportunities and activities, use the FM CRM_ORDER_MAINTAIN. You need to handle the tables of this FM accordingly to create different kinds of orders.
You can do it so by handling the PROCESS_TYPE of CT_ORDERADM_H in the changing tables.
Regards,
Karthik.

How to Enter the Mobile number for Business Partner

Dear CRM ABAPers,
I am creating the Business Partner Using the BAPI "BAPI_BUPA_CREATE_FROM_DATA".
But I am not able to Enter the Mobile number for the Business Partner.Please help me how to Do this
It is very Urgent Requirement.
Thanks & Regards,
Ashok.

Hello Ashok,
Using the same BAPI , set the field R_3_USER of the tables parameter TELEFONDATA to 3 to save the mobile number.
Hope it helps.
Thanks,
Sriram S

Documetations about the complex interface for business partner

Hi Folks,
did anyone knows, were I can find some documentations about "how to use the complex interface for business partner"?
Kind regards
Thomas

The above problems through Notes: 810634 has been resolved!
The return message is "Instance BJXE001005 belonging to object type BusinessPartnerFS was created".
But the BP "BJXE001005" has not been established in CRM.
How to i?
When i use parameters "roles", the return message is "No update is defined for BP role"?
How to i?
Thanks you!
Do you have any examples I reference to the code?
Thanks a lot.
Edited by: Ken.Li on Apr 13, 2008 9:05 AM
Edited by: Ken.Li on Apr 13, 2008 10:17 AM
Edited by: Ken.Li on Apr 13, 2008 10:33 AM

How to create the Business System both sender and receiver in SAP XI / PI

Dear All
kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
Regards
Blue

Hi,
If by any chance you are not able to find these....
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
Regds,
Pinangshuk.

BOM is changed after creating subcontracting PO,how to adopt the changes

Hi All,
BOM is changed after creating subcontarcting PO,how to adopt the changes in the BOM attached to the PO.
Thank you.

hi
try changing the po
go to me22n and in material item tab clcik on explode BOM
or just remove the item cat L ,enter and again put it
regards
kunal

How to create the request for change of selection text into other language.

Hi,
In my object requirement is that when login through Japanese language, then on selection screen selection text should appear in Japanese language. For that I have maintained the text in Japanese language the program where we define the selection text there from translation I have maintained the text in Japanese but while maintain the text it didn't ask me for REQUEST, because of that I am not able to transport the changes to next system, so I want know how to create the request for this case.
Thanks

Hello Chetan,
You could goto the selection screen texts by goto-> selection texts,
Then you could again goto -> Translation
or
Other-> Translation(Not sure )
Then double click on the Program you should be able to see the Texts that need translation, now change something save and come back and try to activate, now it should propose for a new Transport Request.
Either create a new transaport request or give one that you have given for the program.
Hope the issue is resolved.

How to restrict the change access in CRM for OLTP orders

Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
Suneel

Hi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards.

How to create the web template

Hi BW Experts,
how to create the web template.....!
I just want to know what is the use of Web template. i want to display the report
in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
Thanks
shahina..!

Hiu2026
Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
Go to All programs and select your web application designer
Select the button to create a new page in WAD
Select the chart and place in the layout
Next goto Data provider Target and select your query
Give your report name in the given data provider screen
Select your query in History/find/Favourites/Infoareas button
Select your query in this screen and click OPEN
Now we can see the data provider is assigned to the chart.
To edit the chart you have to right click on the chart
After right click on it we will find another screen where we can edit all the settings
In this screen we can find NEXT click button to change our settings
In this screen we can state the tasks (Title, units, values, range)
In this screen we can change our background /validity/color
In this screen we can add values to the chart
In this screen we can add validity/positions/order/axis types to the chart
In this screen we can change the global settings/and overview of the chart.
This screen shows that we have customized the chart successfully
After successful creation of the chart we have to save the chart
Save your chart in your favorites by giving the description and technical name in the given block.
Now execute your WAD by selecting the execute button
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

How to create the custom infotypes in Campus Management

Hi,
Please help me how to create the custom infotypes in campus management.
Thanks,
Lakshmi.

Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Cheers,
vasavi.
kindly reward if helpful.

How to create the folder in presentation server through pop-up(

Hi Experts,
Can u give me the solution , how to create the folder in presentation server through pop-up(means dynamically, after executing the program , pop-up has to come to create the folderand path)
regards
ram.

Use the methods -> DIRECTORY_BROWSE & DIRECTORY_CREATE of the class CL_GUI_FRONTEND_SERVICES
DATA: path TYPE string,
      rc TYPE i,
dir_name TYPE string value 'HI'.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_BROWSE
    CHANGING
      SELECTED_FOLDER      = path
IF SY-SUBRC <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
concatenate path '\' dir_name into path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_CREATE
    EXPORTING
      DIRECTORY                = path
    CHANGING
      RC                       = rc
IF SY-SUBRC <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Edited by: Kartik Tarla on Sep 23, 2009 5:54 PM

How to create the sub type field in hr abap infotype

hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.

Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan

How to create the OSB artifacts in JDeveloper

The docs I've seen get me a little closer in being able to test the DB and AQ Adapters on the OSB, but it really does not help me understand how to do it through JDeveloper.
In the past we have done all of the OSB development in Eclipse and then imported it into the OSB.
Again, the docs I've seen shows how to do the Adapter configuration in JDeveloper and then how to create the Business Services and Proxy Services directly in the OSB console.
But I need to know how to create the OSB artifacts in JDeveloper then import them into the OSB or if this is even possible. I know there is an optional Eclipse component that you can install with OSB. Will we have to use both tools? (e.g. Eclipse for the OSB components and then JDev for the Adapters.)
Anyone have clarification?

Again, the docs I've seen shows how to do the Adapter configuration in JDeveloper and then how to create the Business Services and Proxy Services directly in the OSB console.WSDL/Binding generation is required to be done in JDEV. OEPE/Workshop doesn't have these adapter plugins to generate WSDL and Bindings. Once the WSDL/Binding are generated you can either use sbconsole or OEPE/workshop for your usual development.
But I need to know how to create the OSB artifacts in JDeveloper then import them into the OSB or if this is even possible. There are no OSB artifacts that need development in JDEV. As you are aware the oracle adapters exposes back-end functionality in XML interface. This XML interface is modeled by WSDL. For adapters to work we need the WSDL and corresponding binding. Since OSB JCA transport uses adapters, we are required to provide these components.
Will we have to use both tools?For any services that are using JCA adapters, we need to use both (JDEV and (sbconsole or OEPE) ).
IF your services doesn't have to use JCA adapters then JDEV is not required.
Let me know if you have any questions.
Manoj

How to create the Change Advisory Board business partner?

Similar Messages

Maybe you are looking for