How to create the Contribution region with Native document

HI,
I have the below scenario to have the Contribution region in my custom page.
1) I am displaying all Campaign records in primary page.
2) When I click on each Campaign record, this will take me to secondary page to display the Editable Contribution region assigned with Native document.
My requirement :
3) I have 4 more Contribution Regions which will have to relate to the same above said Campaign in secondary page. To achieve this, I have only one contribution region with multiple elements within that region in my secondary page.
Please let me know how I can add different native documents to 4 different Contribution Regions. Now if I add different document to the region, same document will be assigned to the each region having different elements. Also if I add multiple regions in secondary page, primary page will only point to first region available in that secondary page.
Please let me know how I can add 4 different native documents to 4 different Contribution Regions available in secondary page. It would be great if any one give idea as soon as possible.
Thanks in advance.
Anyone did not come across this type of scenario?
Thanks,
Ramesh
Edited by: Ramesh_Est on Aug 10, 2010 9:35 PM

The secondary page is used to display a specified content item. One content item, specified on demand. Only one. Period.
If you want to assign multiple content items to multiple regions, well you're talking about primary pages.

Similar Messages

How to create the funtion module with step by step

friends can u help me regarding how to create the function module very urgent,
regards
bhavani

To create a function module, you first need to create a Function Group which will keep all the function module of same functionality.
To create a Function Group, go to SE80->Click on Workbench-Edit Object->Function Group Tab->Enter Function Group name-> Click Create.
To create a Function Module:
Go to T.Code SE37->Enter the Function name->Enter Function Group name n Short Des.-> Here you need to define Import, Export parameters with the condition. Also you can write your code in source code tab.
check this link
Converting seconds values
check the FM code. if you don't have this FM code, create it in SE37 and make use of it.
FM MONI_TIME_CONVERT
FUNCTION MONI_TIME_CONVERT.
""Lokale Schnittstelle:
*" IMPORTING
*" REFERENCE(LD_DURATION) TYPE SY-TABIX
*" EXPORTING
*" REFERENCE(LT_OUTPUT_DURATION) TYPE SWL_PM_CVH-DURATION
DATA: LD_HOUR(4) TYPE N. "
DATA: LD_MIN(4) TYPE N. "
DATA: LD_SEC(4) TYPE N. "
DATA: LD_VALUE2(2) TYPE N.
DATA: LD_VALUE3(3) TYPE N.
DATA: LD_VALUE4(4) TYPE N.
DATA: SAVE_DURATION LIKE SY-TABIX.
data: ld_minus(1).
SAVE_DURATION = LD_DURATION.
if ld_duration < 0.
save_duration = save_duration * ( -1 ).
ld_minus = true.
endif.
CLEAR LT_OUTPUT_DURATION.
IF SAVE_DURATION NE 0.
LD_HOUR = SAVE_DURATION DIV 3600.
save_duration = save_duration - ld_hour * 3600.
LD_MIN = SAVE_DURATION DIV 60.
save_duration = save_duration - ld_min * 60.
LD_SEC = SAVE_DURATION.
IF LD_HOUR LE 100.
LD_VALUE2 = LD_HOUR.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+3(2).
ELSEIF LD_HOUR LE 1000.
LD_VALUE3 = LD_HOUR.
WRITE LD_VALUE3 TO LT_OUTPUT_DURATION+2(3).
ELSE.
LD_VALUE4 = LD_HOUR.
WRITE LD_VALUE4 TO LT_OUTPUT_DURATION(4).
ENDIF.
WRITE ':' TO LT_OUTPUT_DURATION+5.
LD_VALUE2 = LD_MIN.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+6(2).
WRITE ':' TO LT_OUTPUT_DURATION+8.
LD_VALUE2 = LD_SEC.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+9(2).
LT_OUTPUT_DURATION = LT_OUTPUT_DURATION+1.
if ld_minus = true.
write '-' to lt_output_duration+1(1).
endif.
ELSE.
job running or aborted
ENDIF.
ENDFUNCTION.
Eg:2
Use the following procedure to create a function module
1.From the ABAP/4 Development Workbench screen, press the Function Library button on the Application toolbar.
2.Type the name of your function module in the Function Module field. The name must begin with Y_ or Z_.
3.Press the Create button. The Function Module Create: Administration screen is shown
4.Type the name of a function group in the Function Group field. The function group name must be four characters long and must begin with Y or Z.
5.Type an S in the Application field. This field is used to indicate which function area uses the function module. Our functionality is not used by any functional area, it is simply an example, so any choice will do. (S indicates that the function module contains functionality needed by Basis.)
6.Type a description of the function module in the Short Text field. The contents of this field are seen when displaying a list of function modules.
Press the Save button on the Application toolbar.
7.If the function group does not already exist, a pop-up informs you of that fact and asks you if you want to create it. Press the Yes button to create the function group. The Create Function Group dialog box appears. Type a description in the Short Text field and press the Save button. The Create Object Catalog Entry screen appears. Press the Local Object button. You are returned to the Function Module Change: Administration screen.
8.Press the Source Code button on the Application toolbar. The Function Module Edit screen is displayed.
9.Type the source code for your function module. Do not change the system-generated comment lines under any circumstances! Your function module might fail to operate if you do.
10.Press the Save button on the Application toolbar. The message Program xxxxx saved appears in the status bar at the bottom of the window.
11.Press the Back button on the Application toolbar. You are returned to the Function Library Initial screen.
12.If you want to define import or export parameters, select the Import/Export Parameter Interface radio button. Press the Change pushbutton. You are shown the Import/Export Parameters screen (refer to Figure 19.6). Type the names of your parameters in the first column and enter any other desired characteristics for each parameter. When you are finished, press the Save button and then the Back button.
13.Finally, to activate your function module, press the Activate button on the Application toolbar of the Function Library Initial Screen.
http://www.erpgenie.com/abap/bapi/example.htm

SAP Cloud SDK : How to create the Note Field with Char 1000 length

Hi Experts,
I have a requirement to create Note type fields in the standard business object. and that note field should be 1000 char length.
Also I need to check whether that Note field we can add under the standard report or not with report enhancement?
1) How to make a Note type field using SDK with length 1000 char? Is it possible? If yes How ?
2) If using SDK Note type field possible then how to display that field in report ?
Many Thanks,
Mithun

Hi Frank and Horst,
I have followed the steps you have mentioned in the post.
1) Create Business Object Extension.
2) Add the Custom Field with Type " LANGUAGEINDEPENDENT_EXTENDED_Text".
3) Enhance the Screen and Add into the Header section of the COD_TI screen.
I have successfully entered the unrestricted character into that field.
But I want to add that custom field into the Standard Data Source or Standard Report.
1) Is it possible to add custom field under the Standard Data Source or Report Using SDK?
2) Is it Possible to display the 1000 character length on the Report field?
3) Is it possible to display the created extension field under the report / data source using SDK?
Many Thanks,
Mithun

How to create the deployment descriptor with the sun application server

I have packaged my .war and ejb-jar files. I go to autodeploy and it says i need a deployment descriptor?

this is actually an example .ear file that i am trying to run. When i create the client with the deploytool that comes with suns application server i get
C:\appclient>appclient -client swe645-appClient.jar
Caught an unexpected exception!
javax.naming.NameNotFoundException: EditEmpBean not found
        at com.sun.enterprise.naming.TransientContext.doLookup(TransientContext.
java:185)
        at com.sun.enterprise.naming.TransientContext.lookup(TransientContext.ja
va:157)
        at com.sun.enterprise.naming.SerialContextProviderImpl.lookup(SerialCont
extProviderImpl.java:101)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(Reflecti
veTie.java:123)
        at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispa
tchToServant(CorbaServerRequestDispatcherImpl.java:648)
        at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispa
tch(CorbaServerRequestDispatcherImpl.java:192)
        at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest
Request(CorbaMessageMediatorImpl.java:1709)
        at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest
(CorbaMessageMediatorImpl.java:1569)
        at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(C
orbaMessageMediatorImpl.java:951)
        at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.call
back(RequestMessage_1_2.java:181)
        at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest
(CorbaMessageMediatorImpl.java:721)
        at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatc
h(SocketOrChannelConnectionImpl.java:473)
        at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.doWork(
SocketOrChannelConnectionImpl.java:1262)
        at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.
run(ThreadPoolImpl.java:409)

How to create advance table region with columns by code

hello friends
i need to create advance table region and columns dynamically ... for that i want to know any code snippet do you have
please share with me that would be really great help

Hi ,
It is not possible through code but
1.) U can create a new custom OAAdvanced table under a custom region using JDeveloper.
2.) Create stack layout bean using personalization on the page ,and in extend property of StackLayoutBean mention the complete path of above custom region .
Thank
Pratap

How to create the new row with existing values

Hi all,
first of all i create a row,
i opened that in edit mode,
suppose i want to edit any one of the value in that recordd,
that time compulsory create a new row with those valuess.
how can i create a new row with those valuess.

Hi Anusha,
This code correct for your requirement, only thing is you are not able to modify it as per your requirement.
What you have to do is:
1. Copy queried row into into new row, change primary key values(but don't commit your changes here).
2. Now you have two rows in your VO(OLD as well as New)
3. Make any changes if you want using User Interface.
4. At the save button first compare OLD and NEW row, if any value is differing then commit the chnages(it will insert new row in corresponding database table), if no changes are there I mean to say OLD value and NEW rows are same then rollback(it will remove copied row from VO and no row will be inserted in database.)
While comparing rows please note that Primary keys will not be same so don't compare Primary keys while comparing rows.
I hope it will help you.
Regards,
Reetesh Sharma

How to create the composite control with textinput,button and grid.

I have created the application having two Textinput and three button and a DataGrid.
1. on click of first button next to "select a value" , a DataGrid will be open.
and i am using all the functionality of DataGrid.
2. now by using all of these control i have required to create single composite control.
plz help me how to create this composite control.

Right click the graph and select Create>Property Node. On the diagram, find the property node, right click it and first select Change All to Write. Right click again and if you select Properties, you will see a list of all the available properties for the graph. The properties you want are XScale.Minimum, XScale.Maximum, XScale.Increment, YScale.Minimum, YScaleMaximum, and YScale.Increment. You can grow the single property node to have as many properties that you want. Once you have all the properties created, create front panel controls and wire them to the property node. See the attached picture.
Attachments:
graph_properties.jpg ‏16 KB

How to create the Frame object with API in 6i?

do i create an item using d2fitmcr_Create, and then set the type or style to frame? or is it a graphics item that i have to create using a different function? ive tried various combinations with no luck.
ive looked at the frame object in the GUI, and cant figure out how to duplicate it using the API (the frame object is the thin line box with a label used to groups items visually on a form)
thanks!
[email protected]

Frame is a type of graphic d2fgracr_Create() (d2fgra.h) then set the type as required using d2fgras_graphics_typ():
Definition of Graphics types is in d2fdef.h
** Graphics Type (D2FP_GRAPHICS_TYP)
** [BPT]
#define D2FC_GRTY_ARC              0                                 /* Arc */
#define D2FC_GRTY_IMAGE            1                               /* Image */
#define D2FC_GRTY_LINE             2                                /* Line */
#define D2FC_GRTY_POLY             3                             /* Polygon */
#define D2FC_GRTY_RECT             4                           /* Rectangle */
#define D2FC_GRTY_RREC             5                   /* Rounded Rectangle */
#define D2FC_GRTY_TEXT             6                                /* Text */
#define D2FC_GRTY_GROUP            7                               /* Group */
#define D2FC_GRTY_FRAME            8                               /* Frame */All the various properties for setting up the associated block etc (if required) can be set through macros in d2fgra.h

How to create a material master with referrence to exsisting material maste

hi experts
how to create the material master with reference to an existing material master ?
please explain in steps
regards
jai

Dear,
It is very simple.
Enter MM01 t-code.
Enter your existing material code in field of reference material code.
If your material number range is external number range then enter number of material otherwise direct enter industry sector and material type.
After enter basic detail system ask you plant/storage location detail and view detail.
Select reference plant and storage location in left sight of diglog and enter plant and storage location in right sight of diglog screen for which you want to maintain material master.
Then click on all view, If you want to change some detail change it.
Due to reference material all detail is come from reference material.
Then click on save.
NOTE: - You can create new material with reference of old material but it is prerequest material type should be same of both material old and new.
Regards,
Mahesh Wagh

How to create a dropdown menu with sub buttons that link back to the labels on click.

im trying to create a dropdown menu buttons that when you rollover to the top central button the button it opens up like a drop down menu would containg two other subsectional buttons. This makes the sub sectional buttons seperate from the main stage making it difficult to simply give them a on click, sym.play("label") function.
the buttons work like this in symbols or sections stage/panel/homebutton inside home button is group dev containg another group dev containg the button which I need to link back to a "label" in the /panel/ symbol or section. Thank you very much.

pdp_1 wrote:
Hi!
I would like to create a DVD menu that offers two languages. So the first page gives two options: Language 1 and Language 2. Then depending on which language you choose, you go to a menu that proposes different videos and a photo slideshow.
Regardless on which language button you click on initially, you get the same content but in different languages.
I've been looking at Premiere's templates, which I can certainly customize, but I really don't see how to create the double menu. Does anybody have an idea?
Put the video with the first language on the timeline followed by the video with the second language. Use chapter markers so you can have each video as a chapter in the menu.
I use Premiere Pro, so I can't give more specific directions. Perhaps somebody like ATR will chime in.
Also, I have another question: can I put videos from different projects in the same DVD with Premiere or must all of the videos that go into the DVD be in the same project?
Thank you very much!!!
pdp1
They must be in the same project.

How to create an install cd with the final cut pro x app if the app comes from App.Store?

How to create an install cd with the final cut pro x app if the app comes from App.Store?

Just copy the Application FCPX to your CD. When you want to install drag the FCPX to the Application folder and you are done.

How to creat the Varient for 1099MISC With Holding Tax

How to create the Variant for 1099MISC With Holding Tax ?

HI,
please follow the below steps to create variant at report.
tcode se38
report RFIDYYWT
pass all the parameters
press save icon
give variant name
retrive the variant in report
tcode se38
report name RFIDYYWT
press : shift + F5
or get varinat icon.
I hope above will resolve your issue.
Regards
Madhu M

How to create the BC4J Package in JDev 10g (with OAF)?

Hi everbody.
in JDeveloper 10.1.3.1.0
How to create the BC4J Package for Client Object or Server Object?
In JDeveloper 9i Ext,
1. select the Project in Navigator
2. right-click and select "New Business Components Package... " from the context menu
3. "Business Component Package Wizard" page appears.
In JDeveloper 10, I cannot find "New Business Components Package..." from the context menu on the Project.

Do you have the OA extension installed ?
If not then please follow the thread Oracle JDev 10g with OAExt for Release 12 now on Metalink
for more information in this regard.
--Saroj

How was created the cluster with keys in example: Sim Phone.vi

Hello all
I have LV 7.1.1
I have found the example: Sim Phone.vi
And I don't know how was created the cluster with keys?
Best regards
Iskander

It's just like any other cluster you create. Put a cluster container on the front panel and insert some Booleans. the actual Booleans are on the classic controls palette. The border of the cluster is also colored transparent with the paintbrush on the Tools palette.

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the Contribution region with Native document

Similar Messages

Maybe you are looking for