How to create the generic data source for Labour costs report in BI (actual& plan costs)?

Hello Guru's
My requirement is to get the total labour costs in BEx analyzer.So i need to create custom DS for that. But i am not sure about the FICO tables which are having the Labour info..
I'm having the GR10 report from R/3 sidepls look at the document. But i am not sure about the report, how that built,and giude me on the report.
Please help on this to going forward.

Hi,
There are COOM data source which may suits your needs.
please check data source
0CO_OM_WBS_6
0CO_OM_WBS_3
Base tables are COSP and COSS.
Check about coom data source, if not suitable then go for custom data source.
About table cross verify with your source team.
Thanks

Similar Messages

Creating the text data source for 0OI_LIFNR(TD: Carrier (Number of vendor a

Hi
Have to create the text data source for this characteristic. Basically it is the same as 0Vendor here.
I want to make it delta enabled.
Am creating it on the view BIW_LFA1T(same as 0vendor)
Can anyone advise what can I use to make it delta enabled without any code.
Can I use numeric pointer like the 0Vendor_text.
Many Thanks and regards,
Kate.

when defining a data source through the admin web page, don't add '!' in front of the password.
! is needed only when configuring a data source in the mapViewerConfig.xml file.

Finding the Generic data source for vendor master.

Hi,
I am trying to find the generic data source for 0VENDOR Infoobject on R3. But I am not able to find the exact match. Can any one help me? I just started on BW!!.
Thank you

Hi Tippireddy,
you want to extract the vendor information through the business content then go through the following navigation...
T.code RSA5 -> MM-IO (Master data Materials Management in general) -> 0VENDOR_ATTR or 0VENDOR_LKLS_HIER or 0VENDOR_TEXT these three are the standard data source for vendor.
Regards,
PRK

Error While Creating The Generic Data Source.

Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field Type
MANDT CLNT
RECNO NUMC
STATUS CHAR
LMODF CHAR
Table2 has Fields
Fields Type
MANDT CLNT
RECNO NUMC
PHCOS QUAN
MATNR CHAR
EQSFS QUAN
MEINS UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santosh

n Table2 under Currency and Quantity Field tab
For Field PHCOS The change Reference table to TABLE2 For Field EQSFS the change the Reference Table to TABLE2
ref field MEINS ...
This works ..
Priya
Edited by: Priya on Dec 31, 2007 1:30 PM

HOW TO CREATE SAP BW DATA SOURCES FOR TDS REPORT?

Hi All,
How to create generic data source for these fields?
I have TDS report these names and field.
Pls anyone guide me..
PAN NUMBER
J_1IPANNO
VENDOR NAME (accont type - k)
LIFNR
POSTING DATE
BUDAT
WITHHOLDING TAX BASE
WT_QSSHH
WITHHOLDING TAX AMOUNT
WT_QBSHH
NAME OF WITHHOLD TAX TYPE
WITHT

Hi ,
Thanks for giving info.
How to add different tables in generic data source?
PAN NUMBER
J_1IPANNO
J_1IMOVEND
VENDOR NAME (accont type - k)
LIFNR
J_1IMOVEND
POSTING DATE
BUDAT
RBKP
WITHHOLDING TAX BASE
WT_QSSHH
WITH_ITEM
WITHHOLDING TAX AMOUNT
WT_QBSHH
WITH_ITEM
NAME OF WITHHOLD TAX TYPE
WITHT
WITH_ITEM

How to change the jta-data-source for projects in EJB 3

Hi all,
Sorry my english! :)
I'm learning the EJB 3.0 and I'd like to change jta-data-source for projects in JDeveloper 10.1.3.1.
I explain:
In the same Application, I have a project with all Entitys and Session Beans. At the moment, the persistence.xml file is there with the jta-data-source tag.
I make a new project with JUnit (Cactus) for test the EJB's that I'd like jta-data-source reference the test database.
I make another project, with Servlet/JSP/JSF that use EJB's with interface and I'd like jta-data-source reference another database.
What kind of changes (workaround) I could make to solve this problem?
Thanks a lot!
Luciano

Hi,
There are COOM data source which may suits your needs.
please check data source
0CO_OM_WBS_6
0CO_OM_WBS_3
Base tables are COSP and COSS.
Check about coom data source, if not suitable then go for custom data source.
About table cross verify with your source team.
Thanks

How to create the multiple spool requests for a single report.

Hi gurus,
I have one requirement to be completed , i need to send the out put of the report via mail in pdf format. for that what i did was, iam executing report in background and creating spool request and converting it to pdf and sending the file.
now the problem is, its a customer ledger report, for each customer i need to create a new spool request and send mail to that particular customer, now my dought is how to create multiple spool requests for a single pro and how i need to go about it.
And one more question is can we create a spool request for a report which is running in online.
waiting for inputs frm gurus.

Hello,
As per my knowledge for creating new spool id you will have to set
output_options-tdnewid = 'X'.
and then using
job_output_info-spoolids
create a pdf using
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Rachana.

Selection in the Generic Data Source does not work

Hi gurus,
I have some problem with the selection in the Generic Data Source.
I have created a view as a base of a Generic Data Source.
This view is based on several table; i.e.: VBUK-VBELN (Sales Order number), VBAP-ERDAT (creation date of Sales Order), VBAP-POSNR (Sales order item), VBAK-BSTNK (Customer Purchase order number).
In the view, some join conditions have been defined: VBUK-VBELN = VBAK-VBELN, VBUK-VBLN = VBAP-VBELN.
I want to extract the Sales Order number, Sales order item and Customer Purchase order number for the Sales order created on the previous year.
On the Generic Data Source, I select VBELN (Sales order number) and ERDAT (creation date of sales order) as selection.
However, when I run the extractor checker (RSA3) on this Generic Data Source, the selection does not work at all, i.e.:
eventhough I restricted the Sales order number and/or the creation date of sales order, the generic data source ignores the selection criteria and extract ALL data.
Does anyone ever have similar problem? Did I miss some step in the Generic DAta Source creation? How to fix this problem?
Thanks a lot in advance.
Best regards,
Fen

Hi Fen,
Just check what is the output you get for the same selection for the view you created.
Bye
Dinesh

Generic Data Source for Hierarchies

Hi guyz,
Can any body tel how to create generic data source for hierarchies, plz give me the steps to do it.
Thanks & Regards
Veera

1. Generate the DataSource for FI-SL sets using the BW IMG (Transaction BW07).
2. FI-SL sets are not compounded in OLTP. If you want to extract FI-SL sets for a coumpound characteristic in BW, proceed as follows:
a) Select the 'BW InfoObject (characteristic) is compounded' field and enter a data element (compound information of the meta data).
b) After generating the DataSource, execute compounding in a customer exit. To do this create, a project for the SAP enhancement RSAP0001 in Transaction CMOD, and program EXIT_SAPLRSAP_004 (ZXRSAU04) as described in the attachment.
3. Execute the following steps in BW:
a) Update the meta data for the FI-SL sets in the InfoSource tree.
b) Maintain the transfer structure and transfer rules.
c) If the extracted set hierarchies contain intervals, you must allow intervals in hierarchies for the characteristic in BW. Check the hierarchy properties of the characteristic in Transaction RSD1 and set the "Intervals in hierarchies allowed"
4. With this solution you can only extract sets created in Transaction GS01 (set class 0000).
If the hierarchy list in BW for the set data source is empty, first check in the OLTP system whether set class 0000 contains suitable sets at all. To do this, start Transaction GS02 (not GS03!). Field Set class may be displayed; if this is the case, enter 0000 there. Position the cursor on field Set name and select F4. Enter the table and field name you specified in Transaction BW07 in popup "Select sets" and select "Continue (Enter)". If message GR003 "An appropriate object was not found" is displayed, the hierarchy list in BW is also empty.
5. For CO groups (set class 01xx), the following DataSources are contained in the standard delivery
·     0ABCPROCESS_0107_HIER                    Business process
·     0ACCOUNT_0109_HIER                       Account number
·     0ACTTYPE_0105_HIER                       Activity type
·     0COORDER_0103_HIER                        Order
·     0COSTCENTER_0101_HIER                    Cost center
·     0COSTELMNT_0102_HIER                     Cost element
·     0PROFIT_CTR_0106_HIER                    Profit Center
·     0STKEYFIG_0104_HIER                      Stat. key figure
On principle, sets can also be created for the DDIC fields of these objects in R/3 GS01.
From Release 4.0, this no longer makes sense since the CO groups can then be used anywhere in FI-SL.
With regard to the conversion of sets to CO groups in Release 4.0, please refer to the FI-SL-VSR Release Information for 4.0A and Notes 92029 and 51132.
6. For other set classes, no DataSources are delivered.

Doubt in Generic data sources for hierarchy & text

Hi All,
I have a couple of doubts as mentioned below.
1 . Why we canu2019t generate generic data source for hierarchy?
2. While creating Generic datasource for text there is one more option is available i.e. "Extraction from domain"
what is domian please explain .
Thanks & Regards,
Saurabh Bansal

Hi,
1.We can't maintain Hierarchies in ECC, Because the Database design of the OLTP system is based on ERM(Entity Relationship Model),i.e Tables are connected via Primary and Foriegn key relationships, Whenever we need 1: Many connection divide the data in different tables,connect them using the primary and foriegn key relationships.
2. Domain will provide the technical properties of the Field of the R/3 table.
for Eg: length,data type of the field.

How to create 3.x data source in bi 7

Hi Guys,
can anyone tell me<b> how to create 3.x data source(emulated) in bi 7.0 </b>
pls reply me this is urgent
ravi

Ravi,
Please do not multiply the same question several times. The answer is given in the other replica:
how to create 3.x filesystem data source(emulated) in bi 7.0

How to create the generic extractors in sap R/3?,pabitra

Hi,
How to create the generic extractors in sap R/3?
Though it comes under cross application and the types of generic extractors are functional module ,db view,infoset query etc.Do u think the g.e can be built of one of the is types.plz tell correctly
Advance thanks
regards
pabitra

Hi,
this is for DB view ,
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
this is for infoset query,
http://help.sap.com/saphelp_nw04/helpdata/en/d2/cb43b2455611d189710000e8322d00/frameset.htm
Good day,
regards
Arun

Generic data source for muliple level BOM

Hi Bhanu & everyone,
Whats the best way to create a gereic data source for muliple level BOM (STKO, STPO & MAST tables) in BW? I also need to maintain the history.
Thanks,
Aniruh.

Hi Anirudh,
You can create a view of those tables using transaction se11 and then create a datasource using transaction rso2.
Hope this helps.
Regards,
Diego

How to create the change document functionality for a dependent objects?

May I please know how to create the change document functionality for a dependent objects?
I have done it follow the same process as for business process objects. But when i try to test it in BOBT, there is no records under "FIELD_CHANGE_WITH_FILTER". It seems the change hasn't been recorded.
If the way I did to create change document for dependent object is correct, please also kindly advise the possibilities for why there is no record during testing.
thanks in advance.

I also have some doubts about the business object.In this case,one abstract BO hase a subnode wihich is root extended.I added the change document for this node under the category "root_extended" and then tested the function in BOBT.I got some error message "can't find the root key".Shall i redefine the method /BOFU/IF_CDO_CREATION~IS_CDO_CREATION_ACTIVE so as to solve the problem?
Thx.

Stored Procedure used as a data source for an Apex report

Just wondering whether anyone has used a Stored Procedure as the data source for an Apex report. An option to select Stored Procedures(s) as the data source does not appear within the IDE (only displays Table, Views, Functions).
Do you have to return the definition of the Stored Procedure via a function ... if so, how is this done ?
Thank you.

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "920338".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
Just wondering whether anyone has used a Stored Procedure as the data source for an Apex report. An option to select Stored Procedures(s) as the data source does not appear within the IDE (only displays Table, Views, Functions).
Do you have to return the definition of the Stored Procedure via a function ... if so, how is this done ? When asking a question about "reports" it's firstly essential to differentiate between standard and interactive reports. Standard reports can be based on tables, views, SQL queries, or PL/SQL function blocks that return the text of a SQL query. Interactive reports can only be based on a SQL query.
"Stored Procedures" are therefore not an option (unless you are using the term loosely to describe any PL/SQL program unit located in the database, thus including functions). What would a procedure used as the source of a report actually do? Hypothetically, by what mechanisms would the procedure (a) capture/select/generate data; and (b) make this data available for use in an APEX report? Why do you want to base a report on a procedure?

How to create the generic data source for Labour costs report in BI (actual& plan costs)?

Similar Messages

Maybe you are looking for