How to create the Hierarchy Structure in BeX

Hi,
We have a cost center IOBJ MD, and our source system does not have the feasibility to create hierarchy to load it. But the business gave a hiearchy structure in flat file, and want to get the cost center hierarchy in bex.
How do we do that ? Please suggest.
Thanks
RK

Hi,
A hierarchy can be created in the system by two ways:
By hand:
     I would recomend to create by hand if the hierarchy has a few nodes or if the hierarchy will stay without changes for long.
     RSA1 --> Look for your infoobject and "create hierarchy". Then, you can create the folders and nodes that you need and dont forget activate it
This option is the quickest and easier, if you could go for it.
Loaded by flat file.
     If the hierarchy has many many nodes or if it will change its values quite often, it will be a good idea to develop stractors, infopackage and so on for loading the information from file file.
There are plenty of information of the Internet about how to do it.
From my own experience, it would be easier to build the extractor in the old version (rsa1old).
I hope that it helps!

Similar Messages

How to understand the hierarchy structure of 0PLANT io?

how to understand the hierarchy structure of 0PLANT io ?
i can understand the hierarchy structure of PRODUCT io,
well, i hope someone could explain the hierarchy structure of 0PLANT io
thanks.

Hi
You can use following hierarchy tables
RSTHIERNODE - Texts of Non-Postable Hierarchy Nodes
RSEHIERNODE - Master Data: Hierarchy Nodes that Cannot Be Posted To
RSMHIERNODE - Master data: Hierarchy nodes that cannot be posted to
RSHIEDIR - Hierarchy Catalog
RSHIEDIRT - Hierarchy directory texts
RSREQHIER - Data Request hierarchy
RSROLEHIERARCHY - Role hierarchy
In addition to these have a look at K table & I table for 0PLANT.
K table - Hierarchy SID table
I table - Hierarchy structure table
Hope this will help..!!
Thanks,
Vikrant

How can change the folder structure in Bex Analyser to match the Web

Hi Experts,
When I create a report using the Web Analyser and save it in My Portfolio or Bex Portfolio, I can't find the report (or folders) in Bex Analyser.
How Can i change the folder structure in Bex Analyser to match the Web Analyser?

Hi Reddy,
       As u have created reports and saved it in BEx portfolio or My portfolio it will be saved in the KM folder which is known as Knowledge management folder for the KM services such as feedback,rating etc.So u cant view them when u open in web analyzer.U can only see them when u save in favourites or the roles folders.
                          Hope this helps
                     Sunil Reddy

How to create the Hierarchial table using ALV.in WD4A

Hi All,
I am struggling hard to make the hierarchial ALV, But could not do it.
Could you help me.
Actually I want the column to be hierarchial. For this i am using
if_salv_wd_column_hierarchy~set_hierarchy_column.
Also i tried to display the whole table as Hierarchial
lr_table_settings->set_display_type( if_salv_wd_c_table_settings=>display_type_hierarchy ).
For both the possibilities the result is not as desired.
Regards,
Arti.

Hi Aleem,
The link u have provided gives the solution for the Table.
I want the implementation for ALV.
Also my requirement is that the first column of the ALV should be hierarchial.
On expanding the table cell of first column one more table should open of same type.
This way user can navigate to three diffierent database tables.
The tree is populated at runtime with the data. So the depth of branches is unknown at design time.
I hope the requirements are clear to u now.
Thanks and Regards,
Arti.

Create the data structure

hi,
please let me know how to create the data structure.
thanks
suja

Goto SE11
Select "Data Type" radio button
Give name with starting "Z"...example: ZFIRST_DATA
Press "Create"
Select "Structure"
And Give your own description.
Then give your fields....
Save & Activate

How to create Formulas in the hierarchy structure

Hi,
Is it possible to create formula with in the hierarchy structure, so that the both hierarchy drill down and the created formulas can be displayed at the query output. Please give the valued suggestions.
Thanks
VEERU.

Hello
You have in this case to create a structure and select the node concerned in your hierarchy.
Then create a new formula based on your previous selection for example.
Rgds

How to create the Product Hierarchy maintenance ..?

Hi All,
How to create the Product Hierarchy maintenance (IN APO System), I know manual creation, going to the transaction : /n/sapapo/relhshow , how to create programmatically, is there any Function module?
Pls let me know
Puppy.

Hi Puppy,
Please check whether the below BAPI can be used by you.
T-code: BAPI
Object name: ProductAllocationAPO
Obj type:- BUS11305
Regards
R. Senthil Mareeswaran.

How to create a project structure with the Business Bluprint transaction S

Hi
How to create a project structure and add the required scenarios for your SAP system to your project structure with the Business Bluprint transaction SOLAR01.
Also how to add your SAP system configuration structures to your project structure with the configuration transaction SOLAR02
Thanks,

Dear fr
Have u already created a project?
select the same in solar01 and click the structure tab
On the left side select business scenarios and on the right side select the structure tab
Press F4 here and check the Busines process repository is selected
Nw you hav all the standard business process
For non-standard just type there name and press save button.
Add the relevant one's
Once added here in solar01 reflected in solar02 automatically with relevant data for standard business process.
you hav to add manually for non stand scean you have added.
Hope it clarifies.
Pls assign pts.

How to create a tree structure using list items(tlist)

HI every one,
As we know how to create a tree structure using Hierarchy item type.
We have a requirement to create The same tree like structure using List Item(Tlist)
I would be so appreciated If you send with an example
Thanks
RangaReddy

Hi all
Any one help me please
Actually our client requirement is creation of tree structure using list item,similar to what we used in oracle Application(FNDSCSGN) form.We did the tree structure using hierarchy tree using Htree and Ftree.It working excelently.For client requirement, we want to use list item.How PJC(Pluggable Java Components) is useful for using list item(Tlist).I can't understand how it is useful.
Do you have any example please help me.
Thanks
RangaReddy

How to create the web template

Hi BW Experts,
how to create the web template.....!
I just want to know what is the use of Web template. i want to display the report
in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
Thanks
shahina..!

Hiu2026
Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
Go to All programs and select your web application designer
Select the button to create a new page in WAD
Select the chart and place in the layout
Next goto Data provider Target and select your query
Give your report name in the given data provider screen
Select your query in History/find/Favourites/Infoareas button
Select your query in this screen and click OPEN
Now we can see the data provider is assigned to the chart.
To edit the chart you have to right click on the chart
After right click on it we will find another screen where we can edit all the settings
In this screen we can find NEXT click button to change our settings
In this screen we can state the tasks (Title, units, values, range)
In this screen we can change our background /validity/color
In this screen we can add values to the chart
In this screen we can add validity/positions/order/axis types to the chart
In this screen we can change the global settings/and overview of the chart.
This screen shows that we have customized the chart successfully
After successful creation of the chart we have to save the chart
Save your chart in your favorites by giving the description and technical name in the given block.
Now execute your WAD by selecting the execute button
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

How to create the custom infotypes in Campus Management

Hi,
Please help me how to create the custom infotypes in campus management.
Thanks,
Lakshmi.

Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Cheers,
vasavi.
kindly reward if helpful.

How to create a tree structure using forms.

Hi,
How do i create a tree structure using oracle forms,i have a table named Functions and a specific column 'Function Name' should be displayed in the tree nodes.Can anyone help me out on how to create a tree structure and populating the nodes??
thanks in advance
Regards
Karthik

The FTree package provides functions to populate the tree - look for the topic "Manipulating a hierarchical tree at runtime
" in the online help this point to all the functions and triggers

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

Bank Analyzer - Error while creating the Position Structure

Hi,
We are implementing Bank Analyzer 6.0 and Implementing Financial Instrument and Financial Transaction.
We facing an Error while creating the Position Structure,
Error Message: Status of structure S40CURRACC is "New"
Anyone has an idea how to fix this?
Thank you,
John Crawford

Hi,
1.Run Transaction - /BA1/F0_SGS_START
2.Entered the name of the structure and try to "activate".
3.It will get Active without any inconsistency.
Regards
Phani

How to create the Hierarchy Structure in BeX

Similar Messages

Maybe you are looking for