How To Create the HP_TOOLS partition manually?

Hello,
According to HP, you can create the HP_TOOLS partition manually with type FAT32 and make the partition name HP_TOOLS. I installed Windows 8 on my MSata Drive after I upgraded it and for some reason you can't install the HP_TOOLS on those drives it always gives an error. So When you download the HP UEFI Support Environment from the drivers/software from HP, it will install it on the Hard Drive which I use as a backup drive now.
However, when you restart the computer and hit F2, you do not have the full feature to even run a system check, I have to boot it from a USB instead. How do I fix this problem so I can do a "Custom" install back of the HP Tools and be able to use it without any issues?
What I have done was create a partition on my msata with 2.01GB like it created on my HDD. I made it Fat32 and named it like it said HP_TOOLS. I then copied over the Folder from the HDD to the MSATA Drive. Still it does not work. Any advise would greatly be appreciated!

Bump

Similar Messages

How to create a second partition on the harddisk?

Hello To All Members!
I recently got some viruses on my laptop. So I had to use my recovery cd to recover my system.
Now the problem is that I asked me for the partition where are the files which are being extracted. I marked it to 30GB.
So, windows is working fine but my Rest of 50GB will not be shown.
I thought that the recovery cd will make a new second partition as well, but it did not. Now how to make some other partitions?
Second question related to first one is how much time i can use this recovery disk. I mean will the windows remain genuine?????
For the partition problem i dont know of some possible solutions cause i needed three partitions, 1st of 30GB(Windows Default) and other two of 25GB.
The Best Solution coming in my mind is to make any windows ME or 98 bootable cd and run fdisk to create the remaining partitions.
But it is makes some new questions in my mind. Do i have to use a recovery cd again? If yes than I will not use this process again cause it will ask for partition to extract files of windows and i will choose 30GB again.
And again it will remove additional partitions.
Please help me and clear the questions coming in my mind..
[Edited by: admin on 31-Mar-2007 08:32]

Hi there,
do know for the UlltimateBootCD4Win? This from CD bootable WinXP-BartPEedition with additional tools gives you the ability to make such things like partitioning, backup or formatting your HDD.
It has many more applications which help you to maintain your system without booting your original OS.
So I think that this CD will solve your partitioning issues.
Heres a link: www.ubcd4win.com/
Just try it and tell me your opinion.
Nice weekend and greetings from the sunny south ;)

How to recover the recovery partition after delete all hard disk partitions

hallo
how to recover the recovery partition after delete all hard disk partitions in toshiba satellite pro c850-1fn ?
note that : I did not work recovery disc or usb to my laptop.
I have need of your help.

Satellite Pro C850-1FN (PSCBXE-01700EEN)
Restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All of the original partitions will be restored, including the recovery partition.
If no recovery discs were created, you can obtain them from Toshiba.
Toshiba Europe Backup Media Online Shop
For instructions, see the section Restoring the pre-installed software from your created Recovery Media on p. 4-18 of the User's Manual (attached).
-Jerry

How to create the pricing procedure for domestic & import.

HI,
Pls any body let me know how to create the pricing procedure for domestic & import.
what is the use of the keys
step condiiton condition type from to manual required statistic subtotal requirement caltype basetype.
how system will work based on this.

Hi,
Please see below WIKI for your reference:
http://wiki.sdn.sap.com/wiki/display/ERPLO/16FieldsDescriptioninPricing+Procedure
Regards,
Ninad Kshirsagar

How to stop the restructuring (ran manually) which is running in the backg

How to stop the restructuring (ran manually) which is running in the background.
Tried stop the data base from EAS , but got error message saying that it is not acceptiong any commands.

The only way I know to do it is to stop the application through task manager(Windows) or Kill(Unix). First you have to figure out what PID it is, then kill it. It does come with risk of corrupting the application depending on what step it is in. If you go this route, you should clean up the new created temporary files (Otn, Esn, etc) Some newer versions don't need this last step and will clean up when the application restarts, but I'd rather make sure things look good myself.

How to create the Product Hierarchy maintenance ..?

Hi All,
How to create the Product Hierarchy maintenance (IN APO System), I know manual creation, going to the transaction : /n/sapapo/relhshow , how to create programmatically, is there any Function module?
Pls let me know
Puppy.

Hi Puppy,
Please check whether the below BAPI can be used by you.
T-code: BAPI
Object name: ProductAllocationAPO
Obj type:- BUS11305
Regards
R. Senthil Mareeswaran.

How to create a SRV record manually

I need to create the SRV record manually in order to join my Windows XP machines to the Xserve domain, How can I do this?

Drop this question, because lack of answer.

How to create the file .jar in openScript .

How to create the file .jar in openScript .
thanks

Ahh ok.
What I usually do is create a script called My Functions then I add new functions by right clicking in OpenScript's tree view
Add-> Other -> General -> New Function.
Once you have created the functions you can either place the script on a shared repository or export it manually an then share it File -> export
Then from the script that you want to call the functions go to:
Script -> Script Properties -> Script Assets -> Script -> Add then select the My Functions script once that is done you can call the methods from the script by:
Add -> Script Functions -> Script My Functions then select the function you wish to use.
Hope this helps
Alex

How to create the PIAPPLUSER ?

Hi All,
I could able to login into the SAP Netweaver XI (PI7) system with PIAPPLUSER Id, but when I give a display search for PIAPPLUSER with the transaction code SU01 in SAP Logon..I am getting "User PIAPPLUSER does not exist" error.
Could you please tell me how to create the new <b>user with roles</b>? Apart from this user, do we need to have any roles for other XI users to do the SAP Netweaver XI scenarios?
Regards
Sara

Hi Sara
Create this user by using SU01 and give the roles or profiles using pfcg transaction.This PIAPPLUSER has this role, i.e. SAP_PI_APPL_SERV_USER role. Try adding it manually. This is one of the service user required to connect from aplain J2SE adapter engine to SLD.
Reward suiatble points

How to create and drop partitions automatically?

How to create and drop partitions automatically?
The environment is Oracle 10g(10.2.0.3) on the RHEL4.0 system.
I want to partition the MESSAGE table by date (NUMTODSINTERVAL(1,'DAY') ). One partition per day. Because the table is huge, only 2 partitions (today and yesterday's data) are necessary to be kept online. All the partitions that earlier than the previous day will be backed up and then dropped. I want to make the partition creating and dropping jobs run automatically. How to do it?
Thank you

junez wrote:
How to create and drop partitions automatically?
The environment is Oracle 10g(10.2.0.3) on the RHEL4.0 system.
I want to partition the MESSAGE table by date (NUMTODSINTERVAL(1,'DAY') ). One partition per day. Because the table is huge, only 2 partitions (today and yesterday's data) are necessary to be kept online. All the partitions that earlier than the previous day will be backed up and then dropped. I want to make the partition creating and dropping jobs run automatically. How to do it?With 11g, new partitions can automatically be created.
With 10g, you need to do that yourself. I prefer to create a "buffer" of future partitions - in case the job whose task it is to add new partitions gets held up or stuck. Or the job queue is full due to some problem and it does not get the chance to execute in time.
I dislike your partitioning criteria. I prefer using the date directly and not mangling it to something else. If a specific day has a large volume of data, then another option is to use hourly date ranged partitions. With local partitioned indexes and the date time range used for querying, this can be quite effective performance wise.
As for partitioning maintenance - I use a custom written partitionManager PL/SQL package that provides an interface for adding daily and hourly partitions to a table. Input parameters are for example name of the table, start date and the number of partitions to add. Similarly it provides interfaces for aging partitions - again by specifying a table and a date-time to use as the starting point, back into time, for removing old partitions.
I typically call this code from the actual application code itself - so before a new partition will be used for example, the app code will first ensure that it has a partition to use. This is safer than a separate job as the dependency is resolved where and when it is needed - and not done as a separate task.
For example - you should have a procedure/package that provides an app the means to log a message into your MESSAGE table. As part of an autonomous transaction, this procedure can check if the required partition exists, before attempting to insert a message into the table.
Where this approach is not possible, a DBMS_JOB can be used to create future partitions - but as I mentioned, rather have it add a bunch of future (empty) partitions in case something goes pear shape with the job mechanism.

How to create a new partition

i just got a new thinkpa. i would like to know how to create a new partition.
i tried partition magic 8.0 and it gave me BSoDs. please let me know. thanks.
thinkpad t400 t9400
2gb ram
windows sp3
160gb 7200 rpm

folivio wrote:
I'm not an expert, but I partitioned the C: drive and made a partition for Windows 8. It worked perfectly as a multi-boot setup.
A word of caution...Make sure that you want to make it a permanent change. When I removed the Win 8 partition and tried to restore my system to factory settings, I could not get the F2 during restart to work. F2 now brings up the multi-boot screen. So I tried to restore using the DVD Restore Set I made before I did anything to the partitions. I was able to boot to the DVD Restore Set by using the F12 key during restart and selecting the BDDVD drive. It looked like it was going to work, but after it loaded the minmum Windows files and I clicked on Restore, I got an error stating that the partition had changed and I could not restore.
I contacted tech support and they are sending me a disc to restore the system.
Regards
Thanks for the heads up. I'd like to use the SSD for installing Windows 8. It seems to have about 25GB free. Isn't that a better place to install the OS? I am not sure why the bigger drive is marked as C: and the small, faster one as D: :-(

How to create the logical file name

Hi All,
    I have requirement where i need to post the Inventory Management data. for this i need to execute std. program RM07MMBL which is having logical file name in the selection screen. but i have placed my input file in application server.
   Can any one tell how to create the Logical filename which refers the physical path. I also tried <b>t-code SF01 & Table - FILENAMEC</b>I and found that we need to add an entry in this table but i really dont know how we have to do since this table cannot be maintained in SM30 also..
Help Me.
Thanks in Advance!...
Regards,
Ramkumar

Hi Ram,
Try using FILE transaction code...
Follow these steps to create:::
Double click on Logical file Path Definition
Click on New Entries,
Give Logical file Path name as Z_LOGICAL PATH and save it
now choose this path and double click on Assignemt of Physical path to Logical path
double click on the OS name
Give some description and give some Physical path name from AL11 transaction and save it
Now Double click on Logical File Name Definition,
Click on New Entries,
Give some logical file name: Z_LOGICAL_FILENAME
Physical file: test
Data Format: BIN
Logical Path: Z_LOGICAL PATH
Hope this helps
Regards,
Phani
Message was edited by:
        Sivapuram Phani Kumar

How to create the web template

Hi BW Experts,
how to create the web template.....!
I just want to know what is the use of Web template. i want to display the report
in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
Thanks
shahina..!

Hiu2026
Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
Go to All programs and select your web application designer
Select the button to create a new page in WAD
Select the chart and place in the layout
Next goto Data provider Target and select your query
Give your report name in the given data provider screen
Select your query in History/find/Favourites/Infoareas button
Select your query in this screen and click OPEN
Now we can see the data provider is assigned to the chart.
To edit the chart you have to right click on the chart
After right click on it we will find another screen where we can edit all the settings
In this screen we can find NEXT click button to change our settings
In this screen we can state the tasks (Title, units, values, range)
In this screen we can change our background /validity/color
In this screen we can add values to the chart
In this screen we can add validity/positions/order/axis types to the chart
In this screen we can change the global settings/and overview of the chart.
This screen shows that we have customized the chart successfully
After successful creation of the chart we have to save the chart
Save your chart in your favorites by giving the description and technical name in the given block.
Now execute your WAD by selecting the execute button
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

How to create the Web application designer

Hello BW Guru's,
how to create the WAD... step by step procedure and where to save the report and how to excute the report.
please send as soon as possible.
Thanks
Sudha

hi,
you can also refer to the following links.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f11a7e3-0601-0010-52a2-c3fbbdb068da
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a8cd1f71-0a01-0010-4783-f119b6132d25?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078 [original link is broken]
hope it helps,
regards,
Parth.

How to create the Table of Content (TOC) in WEB

Dear Sir
Please help me
How to create the Table of content (TOC) in Web Intelligence Report,
Thanks
Gnanasekarn.K
Edited by: Gnanasekaran Kandasamy on Nov 20, 2008 11:12 AM

Hi Gnanasekarn,
You can create TOC in webi using Open Document, You can create link on the TOC and you can connect that link to open new report .
With the help of open document you can open the specific portion of report.
So you can achive your requirement using URL reporting or Open Document.
Regards,
Chaitanya Deshpande

How To Create the HP_TOOLS partition manually?

Similar Messages

Maybe you are looking for