How to create the material using outbound IDOC

Hi all,
how to create the material using outbound IDOC.

Hi..
follow the steps...
1) create a partner profile for material
2) create a material
3) go to transaction BD10 , give material no and then execute.
4) go to transaction WE02 to chk the status.
if you want to send Outbound idoc automatically once the material is cretaed then use change pointers concept.
please get back to me if you need any assisstance further.
Regards,
Lokeswari.

Similar Messages

How to update the status of Outbound IDOC in case of error

I want to know about how to update the status of Outbound IDOC in case of error.
I am using message control functionality here.

HI,
If u r using the standard message and basic type
u can do it in the FM attached to the basic and message type.There u need to write ur own message instead of standard SAP message..chek if there r any userexits available in the FM..where u can overwrite ur own message ..
If u r using the Zmessage and Zbasic type
then u need to declare an internal table of EDIDS structure and then append ur message to the internal table..
idoc_status-docnum   = idoc_contrl-docnum.
idoc_status-msgty    = <message type>
idoc_status-msgid    = message-id.
idoc_status-msgno    = message-number.
idoc_status-msgv1    = message-message_v1.
idoc_status-repid    = sy-repid.
idoc_status-status   = <give the error status>.
APPEND idoc_status.
Reward if u find useful
Regards,
Nagaraj

[urgent ]runtime error occured while creating the material using mm01

hai
am configure the ale program now . the problem is occured during the creating the material using mm01.
am using client 000 (sending system). and i want to send the material to the client 400(receiving system)
while am save the created material using t-code mm01 in client 000 . it depicts the error as
syntax error in program SAPLC140.
plz resolve this problem.
regards
surender

Hi,
In MM01 transaction code u have a problem..normally u will go to mm01 screen to create the material..i thought the same error will occur...so call basis to rectify this problem..
Thank u,
Manjula Devi.D

When am creating the material using the transaction MM01 getting the error

Hi all,
Could you please help me to solve this issue, When I am creating the material using the transaction MM01, am receiving the error message "Express document "Update was terminated" received from author "XXXXXXXX", I checked the in SM13 found error message showing in Z_LGPLA_BIN_POSTING.
Regards,
Muralikrsihna.

ST22 Error is : SAPSQL_ARRAY_INSERT_DUPREC, below is full error message
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"Z_LGPLA_BIN_POSTING" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
Regards,
Muralikrishna

How to create inbound PO using EDI & IDOC???

hi friends,
I dont know abt IDOCs and EDI. Can any body give solution how to create po by using in bound process. plz give step by step. because I ever worked on EDI and IDOCs.

Hi there,
Please have a look at the following link.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/dc/6b828943d711d1893e0000e8323c4f/frameset.htm
Hope this helps,
Kind Regards,
Matthew

How to create the chart using java

Hi Friends,
I have one urgent requirement.I need to create the chart by using the table value.The value is stored in database like as follow..
Attribute     IG
Home     0.05
Married     0.72
Gender     0.05
Employed     0.05
Rate      0.05
I need to get the highest value and create the parent node and lowest value is child node llike that i need create ...
plz any body help me....

You don't do that using Java.
Consult the documentation of the application server in question how to configure it. If you're using for example Tomcat 6.0, then you should be consulting this document: [http://tomcat.apache.org/tomcat-6.0-doc/virtual-hosting-howto.html].

How to Create the Field Using EEWB

Hi Friends,
Can anyone Explain me the Step by Step Process for Creating the Additional field for the Standard Transaction code Using Easy Enhancement Workbench.
Regards,
Ashok.

Hi Ashoke,
Goto the transaction EEWC for setting the system type as development system. This has to be done before you carry out the enhancement.
1. First go to TCode "EEWB".
2. Create the Project and save the same.
3. Open the project and right click on it and create the extension.
4. Give some suitable name and description for your extension.
5. Select the business object for enhancement(for e.g. business transaction orBP).
6. Select the extension type (for e.g.adding new fields).
7. Based on the above selected parameters a wizard will appear.
8. Complete the steps as per wizard.
9. And finally generate the project
Note: Make sure that you check the systems relevant(R/3 or BW)
Also see the below link
http://help.sap.com/saphelp_crm50/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm
& SAP Note: 494966
Fields added through EEWB will comes under custom tab. You can change the name of the tab using VCT.
Regards
Nadh.

How to create Inbound Delivery using SHPMNT03 Idoc details...

Hi,
I need to create <b><b>Inbound delivery</b> using idoc SHPMNT03</b> details. I am getting all the data required to create Inbound delivery is from this idoc. for that I need to create a custom function module.
I tried with FM IDOC_INPUT_DESADV1. But it is for only if you use DELVRY03.
I haven't (yet) found a way to create automatically an inbound delivery when you post the goods issue from the outbound delivery.
Does anyone experienced the use of inbound deliveries with STO and what are your recommendation?
Thanks a lot,
Ranjith.

Hi there,
Please have a look at the following link.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/dc/6b828943d711d1893e0000e8323c4f/frameset.htm
Hope this helps,
Kind Regards,
Matthew

How to create the WSDL using the search function is to implement it ?

Hi
I have a question to everyone.
I have developed LivecycleDesigner now.
PDF Once the search process was conducted in the screen press the search button, the ability to display search results and we want to create PDF on the screen.
I want to implement a WSDL to connect, not handled properly.
MicrosoftInfoPath has been successfully processed, the WSDL no problem I think.
Would you be able to advise?
I would like a sample if possible.
Thanks and best regards,

Mingfei is correct, you probably have no Streaming Reserved Unit configured in your account.
Dynamic packaging from MP4 to Smooth, HLS, and DASH only works if you have a Streaming RU turned on. Otherwise, you can only progressive download the MP4 files or use the Smooth Streaming encoding presets only (which will not support dynamic packaging to
HLS and DASH).
Have you tried to use the Azure Media Explorer tool to test this out again? I think you will find that it works just fine through the AME tool.
The tool will show you the existing streaming Locators on your asset and it will give you access to multiple Players that can play the video back.
You can find the installation package on http://aka.ms/amse
Once you install it, encode and publish your asset, and then use the Publish->Playback menu to test out the stream.

Creating the materialized view using the database link

Hi Guys,
I am using the Oracle 11g release version.
Following is my question,
I had created the Database link to get the data from remote DB table.
Using that DB link, i can access the required table using SELECT statment.
When i tried to create the materialized using that DB link.
I am getting the error SQL Error: ORA-00942: table or view does not exist.
Can anyone please find the root cause and provide the solution for this?
TIA,
Dhivakar.

Hi Dhivakar,
try like this
CREATE DATABASE LINK test
CONNECT TO scott IDENTIFIED BY tiger
USING 'orcl';
Pls make sure the table name.which ur using to create the materialized view.Thanks
Venkadesh

How to create a material master with referrence to exsisting material maste

hi experts
how to create the material master with reference to an existing material master ?
please explain in steps
regards
jai

Dear,
It is very simple.
Enter MM01 t-code.
Enter your existing material code in field of reference material code.
If your material number range is external number range then enter number of material otherwise direct enter industry sector and material type.
After enter basic detail system ask you plant/storage location detail and view detail.
Select reference plant and storage location in left sight of diglog and enter plant and storage location in right sight of diglog screen for which you want to maintain material master.
Then click on all view, If you want to change some detail change it.
Due to reference material all detail is come from reference material.
Then click on save.
NOTE: - You can create new material with reference of old material but it is prerequest material type should be same of both material old and new.
Regards,
Mahesh Wagh

How to create the databse

Hi ,
Iam new to oracle databse , we are using oracle 10g,plz
can anyone help me how to create the database using oracle sql developer.or sql *plus

It is not easy to write scripts.
You can use dbca to create scripts, and modify the scripts,
then run scripts on sqlplus.

How does sap do the material determination for IDOC/EDI?

how SAP do the material determination for inbound PO?
If customer send in their material# or UPC code or buyer material#, what is the order of material determination?
PO1*7CA**UN005650060211VN41112IN515734µ

Hi Samuel,
If the customer sends in their material number this need to be mapped with the value '001' to the field E1EDP19-QUALF and the material number mapped with E1EDP19-IDTNR.
This value is referenced with the CMIR ( Customer material info record) and the vendor's material number is determined which would be used to create the sales order from the inbound PO.
As Such the order of the material determination is depends upon the order it appears in the IDOC.That means the mapping done at the EDI subsystem determines the order of the E1EDP19 segments.
Common practice in EDI inbound P.O scenario,customers send their material number and the vendor material number is determined from the KNMT table.To find the unique material number we need to supply the sales area details as well.
I hope this is answered your question.
Feel free to get back to me if you have any questions.
Thank you.
Regards,
Karun.M

Create Material using MATMAS05 IDOC

Hi Gurus,
Please tell me what are the mandatory fields and tables for those fields to create a Material using MATMAS05 standard IDOC.

Hi,
Fields are never mandatory while sending the idocs. Its the segment which is mandatory.
If you see the definition of MATMAS05 idoc in transaction WE30 you will find E1MARAM and E1MAKTM, as a mandatory segment. It means that you can't send an Idoc without this segment. If you go in segment details than even if you populate a single field in the segment E1MARAM and E1MAKTM then you can send the idocs.
KR Jaideep,

How to create the sales order using BAPI's ....?

Hi Guru's,
could you please provide how to create the sales order using BAPI's .....i need step by step process and please provide the details from scratch....basically i don't have basic knowledge on this....please provide required inputs ....:)
thanks in advance
Srinivas......

Hi Guru's thanks for your inouts and your valuble time...
please find the program logic below...
*& Report ZAREPAS30
REPORT zarepas30.
DATA : gs_vbeln                   TYPE vbak-vbeln,
       gs_order_header_in         TYPE bapisdhd1,
       gs_order_header_inx        TYPE bapisdhd1x,
       gt_order_items_in          TYPE STANDARD TABLE OF bapisditm,
       gwa_itab1                  TYPE bapisditm,
       gt_order_items_inx         TYPE STANDARD TABLE OF bapisditmx,
       gwa_itab2                  TYPE bapisditmx,
       gt_order_partners          TYPE STANDARD TABLE OF bapiparnr,
       gwa_itab3                  TYPE bapiparnr,
       gt_return                  TYPE STANDARD TABLE OF bapiret2,
       gwa_itab4                  TYPE bapiret2.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Requested Delivery Date
PARAMETERS: p_edatu TYPE edatu OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
gs_order_header_in-doc_type = p_auart.
gs_order_header_inx-doc_type = 'X'.
Sales organization
gs_order_header_in-sales_org = p_vkorg.
gs_order_header_inx-sales_org = 'X'.
Distribution channel
gs_order_header_in-distr_chan = p_vtweg.
gs_order_header_inx-distr_chan = 'X'.
Division
gs_order_header_in-division = p_spart.
gs_order_header_inx-division = 'X'.
Reguested Delivery Date
gs_order_header_in-req_date_h = p_edatu.
gs_order_header_inx-req_date_h = 'X'.
gs_order_header_inx-updateflag = 'I'.
Partner data
Sold to
gwa_itab3-partn_role = 'AG'.
gwa_itab3-partn_numb = p_sold.
APPEND gwa_itab3 TO gt_order_partners .
ship to
gwa_itab3-partn_role = 'WE'.
gwa_itab3-partn_numb = p_ship.
APPEND gwa_itab3 TO gt_order_partners .
ITEM DATA
gwa_itab2-updateflag = 'I'.
Line item number.
gwa_itab1-itm_number = '000010'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
Line item number.
gwa_itab1-itm_number = '000020'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
    order_header_in               = gs_order_header_in
    ORDER_HEADER_INX              = gs_order_header_inx
IMPORTING
    SALESDOCUMENT                 = gs_vbeln
tables
    RETURN                        = gt_return
    ORDER_ITEMS_IN                = gt_order_items_in
    ORDER_ITEMS_INX               = gt_order_items_inx
    order_partners                = gt_order_partners.
Check the return table.
LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
    WRITE: / 'Error occured while creating sales order '.
ELSE.
Commit the work.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE: / 'Document ', gs_vbeln, ' created'.
ENDIF.

How to create the material using outbound IDOC

Similar Messages

Maybe you are looking for