How to create the multi-realm (or multi-entries)in one Directory instance?

how to create the multi-realm (or multi-entries)in one Directory instance?
I have installed a new iplanet Directory Server 5.2 on a win2k box, named "vp.com1.com"
When I installed this server, it helped me to create a new Directory server instance with the default realm "dc=com1,dc=com".
I could log on console and found root node, which is "com1.com"
expanded this root node, I got a tree as following:
"com1.com" -> "vp.com1.com" -> "server group" -> "Directory Server(VP)"
Then open "Direbory Server(VP)" -> click tab "Directory"
Got a tree as following:
vp.com1.com(389) --> dc=com1,dc=com
o=NetscapeRoot
Now I wanna create a new entries, which is "dc=com2,dc=com"
How to do?
I had checked almost all the related doc but failed to get the valuable info.
Would you like to do me a favour? Or forward me some reference?
Because I'm a new guy for iplanet Directory Server, would you pls me the help in detail.
This task is very urgent for me, so really appreciate your early help!

Look on page 87 of the Sun ONE Directory Server 5.2 Administration Guide. The section "Creating a New Root Suffix Using the Console" should give you step-by-step instructions.

Similar Messages

  • How to create the logical file name

    Hi All,
        I have requirement where i need to post the Inventory Management data. for this i need to execute std. program RM07MMBL which is having logical file name in the selection screen. but i have placed my input file in application server.
       Can any one tell how to create the Logical filename which refers the physical path. I also tried <b>t-code SF01 & Table - FILENAMEC</b>I and found that we need to add an entry in this table but i really dont know how we have to do since this table cannot be maintained in SM30 also..
      Help Me.
      Thanks in Advance!...
    Regards,
    Ramkumar

    Hi Ram,
    Try using FILE transaction code...
    Follow these steps to create:::
    Double click on Logical file Path Definition
    Click on New Entries,
    Give Logical file Path name as Z_LOGICAL PATH and save it
    now choose this path and double click on Assignemt of Physical path to Logical path
    double click on the OS name
    Give some description and give some Physical path name from AL11 transaction and save it
    Now Double click on Logical File Name Definition,
    Click on New Entries,
    Give some logical file name: Z_LOGICAL_FILENAME
    Physical file: test
    Data Format: BIN
    Logical Path: Z_LOGICAL PATH
    Hope this helps
    Regards,
    Phani
    Message was edited by:
            Sivapuram Phani Kumar

  • How to create the web template

    Hi BW Experts,
       how to create the web template.....!
       I just want to know what is the use of Web template. i want to display the report
    in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
    Thanks
    shahina..!

    Hiu2026
    Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
    Go to All programs and select your web application designer
    Select the button to create a new page in WAD
    Select the chart and place in the layout
    Next goto Data provider Target and select your query
    Give your report name in the given data provider screen
    Select your query in History/find/Favourites/Infoareas button
    Select your query in this screen and click OPEN
    Now we can see the data provider is assigned to the chart.
    To edit the chart you have to right click on the chart
    After right click on it we will find another screen where we can edit all the settings
    In this screen we can find NEXT click button to change our settings
    In this screen we can state the tasks (Title, units, values, range)
    In this screen we can change our background /validity/color
    In this screen we can add values to the chart
    In this screen we can add validity/positions/order/axis types to the chart
    In this screen we can change the global settings/and overview of the chart.
    This screen shows that we have customized the chart successfully
    After successful creation of the chart we have to save the chart
    Save your chart in your favorites by giving the description and technical name in the given block.
    Now execute your WAD by selecting the execute button
    The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
    Web Application Designer for Beginners
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
    Web Application Solutions: A Designer's Guide
    http://www.lukew.com/resources/webapplicationsolutions.pdf
    http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
    Feautures of WAD in 7.0
    http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

  • How to create the Web application designer

    Hello BW Guru's,
    how to create the WAD... step by step procedure and where to save the report and how to excute the report.
    please send as soon as possible.
    Thanks
    Sudha

    hi,
    you can also refer to the following links.
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f11a7e3-0601-0010-52a2-c3fbbdb068da
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a8cd1f71-0a01-0010-4783-f119b6132d25?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078 [original link is broken]
    hope it helps,
    regards,
    Parth.

  • How to create the Table of Content (TOC) in WEB

    Dear Sir
    Please help me
    How to create the Table of content (TOC) in Web Intelligence Report,
    Thanks
    Gnanasekarn.K
    Edited by: Gnanasekaran Kandasamy on Nov 20, 2008 11:12 AM

    Hi Gnanasekarn,
    You can create TOC in webi using Open Document, You can create link on the TOC and you can connect that link to open new report .
    With the help of open document you can open the specific portion of report.
    So you can achive your requirement using URL reporting or Open Document.
    Regards,
    Chaitanya Deshpande

  • How To Create The New VO in Standered Page?

    Hi Gurus,
    Pl z help me how to create the new Custom VO in slandered page,and how to attach that VO in custom RN in all are slandered page only.
    Regards,
    Srini

    Hi Sara,
    <i>1. Could you please tell me how to create the new webservice in XI?</i>
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
    <i>2. What tools we have to use to create it.?</i>
    /people/community.user/blog/2006/09/19/xi-webservice-studio--a-plain-jane-soap-tool
    http://www.gotdotnet.com/Community/UserSamples/Details.aspx?SampleGuid=65a1d4ea-0f7a-41bd-8494-e916ebc4159c
    Altova is also a good option
    <i>3. How to send the SOAP request to XI?</i>
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
    SAP Note 856597
    An Add-on
    /people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
    Regards,
    Prateek

  • How to create the event in the report for jobs scheduling.

    Hi Experts,
    i have a requirement like as follows:
    The following triggers for Batch Jobs in the SCM system will be created.i.     
    Background Processing Event = u201CAPO Background Processing Eventu201D. After sending the Event, write a Log Report line u201CEvent u201CAPO Background Processing Eventu201D sentu201D.
    Could you please suggest me how we create the Event or which transaction ?
    Please give me a steps for creating events so that based on these events we use
    CALL METHOD cl_batch_event=>raise
        EXPORTING
          i_eventid                      = p_bpeve
          i_server                       = p_server
          i_ignore_incorrect_server      = p_ignore
        EXCEPTIONS
          excpt_raise_failed             = 1
          excpt_server_accepts_no_events = 2
          excpt_raise_forbidden          = 3
          excpt_unknown_event            = 4
          excpt_no_authority             = 5
          OTHERS                         = 6.
    Right now i received message "APO Background Processing Event" is doesn't exists.
    Thanks in Advance.
    Puneet.

    Hi Puneet,
    Goto transaction SM62 and in there to BckProcEvents tab. There you can create the events.
    You just need to specify the name and Description of an event.
    Hope this serves your purpose.
    Thanks

  • How to create the dynamic report

    Hi,
    please help me, how to create the dynamic report

    Hi,
      Try this..
    DATA: p_temp(30)  TYPE c DEFAULT 'ZTEST_REPORT'.
    TYPES: BEGIN OF t_abapcode occurs 0,
            row(72) TYPE c,
           END OF t_abapcod.
    T_ABAPCODE-ROW = 'REPORT ZTEST_REPORT.'.
    APPEND T_ABAPCODE.
    T_ABAPCODE-ROW = 'WRITE: / ''TEST REPORT''. '.
    APPEND T_ABAPCODE.
    INSERT REPORT p_temp FROM it_abapcode.
          SUBMIT (p_temp) AND RETURN.
          DELETE REPORT p_temp.
    Thanks,
    naren

  • How to create the custom infotypes in Campus Management

    Hi,
    Please help me how to create the custom infotypes in campus management.
    Thanks,
    Lakshmi.

    Hi,
    Steps to create a HR Infotype:
    1) Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the 'Employee Infotype' radio button.
    4) Select the 'PS Structure Infotype'.
    5) Click on Create... A separate table maintenance window appears...
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on 'All' push button. It takes a few moments.
    10) Click on 'Technical Characteristics'. Infotype list screen appears
    11) Click on 'Change'(pencil) button
    12) Select your Infotype and click on 'Detail' (magnifying glass) button
    13) Give 'T591A' as subtype table
    14) Give 'T591S' as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on 'Infotype Characteristics' ... Infotype list screen appears
    18) Click on 'Change' (pencil) button
    19) Click on 'New Entries'
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirement...
    25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select 'Layout Editor' and click 'Change'.
    27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Don't forget to 'Activate at every level)
    Subtype Creation :
    Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
    Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
    Subty.text tab is T591S and time const tab is T591A.
    See:
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
    HR related site:
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    Enhancement of Infotype
    Check the following
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
    Infotype Enhancement overview screen
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
    Cheers,
    vasavi.
    kindly reward if helpful.

  • How to create the custom table?

    Hi, how to create the custom table and how to integrate the table with defferent R/3?
    my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
    Tks
    DPk

    how to create the custom table
    There are two approach in creating a table.
    1. Bottom-up approach
    2. Top-down approach.
    Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
    1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
    2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
    3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
    4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
    5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
    6. Go to data element page and save, check and activate.
    7. Go to main table page and save, check, and activate.
    8. Also, you have to save the technical settings of the table.
    The table is now ready for operation. You can use it in your program or you can use it to enter information.
    Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
    It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
    SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
    how to integrate the table with defferent R/3
    Transport the Table to the another server/client/qas/prd
    Kanagaraja L

  • How to create the user on Internet Application Server(IAS) control console

    Hi All,
    My Client is asking me for How to create the user on Internet Application Server(IAS) control console 10.1.2( 10g release 2).
    If anyone have the document for How to Create the User on Internet Application Server (IAS) console 10g release 2 , then please send me the document and help me out from this Concern.
    Regards,
    Yadav@intelli.
    Edited by: 851080 on Apr 8, 2011 6:31 PM

    Are you using OID? Can you provide more details about your iAS environment?

  • How to create the Access sequence for the Vendor+material+plant combination

    Hi all
    Please let me know How to create the Access sequence for the Vendormaterialplant combination..
    Whats the use? What its effect in purhcase and taxe..
    brief me please

    Hi,
    you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
    goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
    find the tax condition type. see in it which access sequence is attached.
    if there is none then use JTAX used for taxes in India.
    or you can create the similar one for your.
    to create the same goto OBQ2.
    new entry or copy JTAX.
    and assign the access sequence to condition type.
    this will resolve your problem if you just need to assign the access sequence.
    regards,
    Adwait Bachuwar

  • How to create the relationship between ESSBASE 11 and DM in OBIEE11

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok.
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create the relationship between ESSBASE 11 and DM  in OBIEE 11G?

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create the folder in presentation server through pop-up(

    Hi Experts,
    Can u give me the solution , how to create the folder in presentation server through pop-up(means dynamically, after executing the program , pop-up has to come to create the folderand path)
    regards
    ram.

    Use the methods -> DIRECTORY_BROWSE & DIRECTORY_CREATE of the class CL_GUI_FRONTEND_SERVICES
    DATA: path TYPE string,
          rc TYPE i,
    dir_name TYPE string value 'HI'.
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_BROWSE
        CHANGING
          SELECTED_FOLDER      = path
      IF SY-SUBRC <> 0.
    *   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    concatenate path '\' dir_name into path.
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_CREATE
        EXPORTING
          DIRECTORY                = path
        CHANGING
          RC                       = rc
      IF SY-SUBRC <> 0.
    *   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Edited by: Kartik Tarla on Sep 23, 2009 5:54 PM

Maybe you are looking for

  • Schedule lines in Scheduling agreement

    Dear Experts, We are using Scheduling agreement for our subcontracting process.Meaning we issue the material which is getting converted as another material and do the GRN. When I make a schedule line thro TXN ME38 with specific date and quantity syst

  • Windows 8.1 - Itunes not working

    Hi, I'm unable to run itunes on my Windows 8.1 Professional 64 Bit laptop. It used to work OK, then all of a sudden itunes does not launch or appear to open. If i click on the itunes icon on my desktop, nothing starts up and nothing appears in the ta

  • Slow logins to domain, several event ID errors (group policy, netlogon, NTP errors)

    We have a laptop user who was experiencing slow logons in a remote office.   (Remote office has 100 users, only 1 is reporting the issue).  Helpdesk swapped computers to give the user brand new hardware.   The new laptop worked fine while in the IT d

  • Pricing Procedure Determination - Condition type

    Hello, Would like to know the use of maintaining condition type while maintaing the pricing procedure determination in OVKK transaction.In what way it would help? For standard procdeure RVAA01, standard condition type PR00 is maintained - May I know

  • Whole computer slows down drastically when network drive is mounted

    Firstly, I hope I'm asking this in the right place. I'm using a MacBook with a Time Capsule and a 1.5TB USB drive attached to the Time Capsule as a wireless network drive. Whenever the network drive is connected, my whole computer runs intolerably sl