How to create the Transport of copies programatically

Hello,
I am using a BAPI - BAPI_CTREQUEST_CREATE to create a Transport Request, But it creates a Local Transport Request (without destination),
While i want ot create a tranport of copies with destination, is there any way i can do that thr this bapi or any other way.
Thanks
Yogesh Gupta

used FM TR_EXT_CREATE_REQUEST

Similar Messages

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

How to create the OSB artifacts in JDeveloper

The docs I've seen get me a little closer in being able to test the DB and AQ Adapters on the OSB, but it really does not help me understand how to do it through JDeveloper.
In the past we have done all of the OSB development in Eclipse and then imported it into the OSB.
Again, the docs I've seen shows how to do the Adapter configuration in JDeveloper and then how to create the Business Services and Proxy Services directly in the OSB console.
But I need to know how to create the OSB artifacts in JDeveloper then import them into the OSB or if this is even possible. I know there is an optional Eclipse component that you can install with OSB. Will we have to use both tools? (e.g. Eclipse for the OSB components and then JDev for the Adapters.)
Anyone have clarification?

Again, the docs I've seen shows how to do the Adapter configuration in JDeveloper and then how to create the Business Services and Proxy Services directly in the OSB console.WSDL/Binding generation is required to be done in JDEV. OEPE/Workshop doesn't have these adapter plugins to generate WSDL and Bindings. Once the WSDL/Binding are generated you can either use sbconsole or OEPE/workshop for your usual development.
But I need to know how to create the OSB artifacts in JDeveloper then import them into the OSB or if this is even possible. There are no OSB artifacts that need development in JDEV. As you are aware the oracle adapters exposes back-end functionality in XML interface. This XML interface is modeled by WSDL. For adapters to work we need the WSDL and corresponding binding. Since OSB JCA transport uses adapters, we are required to provide these components.
Will we have to use both tools?For any services that are using JCA adapters, we need to use both (JDEV and (sbconsole or OEPE) ).
IF your services doesn't have to use JCA adapters then JDEV is not required.
Let me know if you have any questions.
Manoj

How to create a transport for sapscript translations

Hello,
does someone knows how to create a transport for sapscript translations which can then be released to the other system via SE10?
In 4.6C when I changed a translation for a sapscript form it created automatically a transport.
Now in 6.0 it wont!
Kind regards
Wolfi.

Hi,
Go through the help.
http://help.sap.com/saphelp_nw04s/helpdata/en/b4/54601d77f38e429ffad9e3e11c1b25/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/assigning%2ba%2btransport%2brequest%2bfor%2bthe%2btranslations%2bin%2bsmart%2bforms
in the above example you have to select FORM instead Smartform.
Thanks,
Sree.
Edited by: t sree on Oct 28, 2008 10:59 AM

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

How to create a transport background for an applet ?

HI can any one tell me the solution for this ...
How to create a transport background for an applet ?
please help
-seenu_ch

what does it mean to have a transparent background to an applet? transparent means you can "look through" it.
What do you want to "look thorough" an applet.
Sorry, I am still not understanding :(
Please let me know what this means.
regards,
Sangeetha

How to create and configure JMSConnection Factory programatically?

Guys,
          How to create and configure JMSConnection Factory programatically and (<b>NOT THRU CONSOLE</b>)?
          There is an option using the JMSHepler to create the Queues.
          Is there an option to create ConnectionFactories using the same or other classes?
          anshuk

There are no 8.1 "JMSHelper" extensions for creating conection factories (they've been added for 9.0). Instead, you can use a variety of more generic methods.
          You can create configuration scripts using WLST or wlconfig or wlshell, or make direct calls from java into WebLogic's public JMX mbean APIs (all config tools, including the console, call into these APIs).
          For a JMX example, see the implementation of the "JMSML" utility on dev2dev.bea.com. For WLST examples search for "+WLST +JMS".
          Tom

How to create a transport request while making changes to a role.

Hi Dear Gurus,
In my organization recently i was given a task to chage an object in a role and create a transport request to move to quality.
can any one help me how to create a transport request and under which this request come under (Custoizing , work bench).
please tell me the steps to be performed.
Kind Regards,
Vamsi.

Hi vasmi,
Go to tcode PFCG.
enter the role name
click on menu role->transport.
and then execute and click on all the checkbox and then it will ask for the request ....and then u can transport it.
regards,
Santosh Thorat

How to create the request for change of selection text into other language.

Hi,
In my object requirement is that when login through Japanese language, then on selection screen selection text should appear in Japanese language. For that I have maintained the text in Japanese language the program where we define the selection text there from translation I have maintained the text in Japanese but while maintain the text it didn't ask me for REQUEST, because of that I am not able to transport the changes to next system, so I want know how to create the request for this case.
Thanks

Hello Chetan,
You could goto the selection screen texts by goto-> selection texts,
Then you could again goto -> Translation
or
Other-> Translation(Not sure )
Then double click on the Program you should be able to see the Texts that need translation, now change something save and come back and try to activate, now it should propose for a new Transport Request.
Either create a new transaport request or give one that you have given for the program.
Hope the issue is resolved.

How to create a transport request number in SM36

Hello SAP gurus,
Can someone please let me know, how to create a transport request number while schedule a new job in SAP.
Can we create a new transport request number in SM36?
Thanks
Sha

Hi Sha
Doesn't make sense to create Transport number in SM36, where it meant for scheduling the batch jobs.
I would rather suggest you to create in SE09 -> Creaet (F6) or
while doing the config ->save the config-> create new req
Please voice out if you really have other requirement to have this.
regards
RG

How to modify the transport request

hi frnds,
i need ur suggestions, we have created the transports and we didnt specified the target system becoz there was no connectivity at that time. now we have connectivity to the target, how can can we add the target to the transport requests which was created by us??????

Thats gonna be a tricky one and would take lot of BASIS involvement rather than BI folks.
What SAP does when you release the transport is, that it looks into the IMG setting to find the target system and generate a file on the operating system for which BASIS Admin would have access to. So ask ur basis folks to locate the file based on ur transports on the OS and import it to the target system(though SAP doesnt recommend it).
Other than that the only option would be to recreate all ur transports (assuming now you have a traget system defined in IMG settings)

How to create the logical file name

Hi All,
    I have requirement where i need to post the Inventory Management data. for this i need to execute std. program RM07MMBL which is having logical file name in the selection screen. but i have placed my input file in application server.
   Can any one tell how to create the Logical filename which refers the physical path. I also tried <b>t-code SF01 & Table - FILENAMEC</b>I and found that we need to add an entry in this table but i really dont know how we have to do since this table cannot be maintained in SM30 also..
Help Me.
Thanks in Advance!...
Regards,
Ramkumar

Hi Ram,
Try using FILE transaction code...
Follow these steps to create:::
Double click on Logical file Path Definition
Click on New Entries,
Give Logical file Path name as Z_LOGICAL PATH and save it
now choose this path and double click on Assignemt of Physical path to Logical path
double click on the OS name
Give some description and give some Physical path name from AL11 transaction and save it
Now Double click on Logical File Name Definition,
Click on New Entries,
Give some logical file name: Z_LOGICAL_FILENAME
Physical file: test
Data Format: BIN
Logical Path: Z_LOGICAL PATH
Hope this helps
Regards,
Phani
Message was edited by:
        Sivapuram Phani Kumar

How to create the web template

Hi BW Experts,
how to create the web template.....!
I just want to know what is the use of Web template. i want to display the report
in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
Thanks
shahina..!

Hiu2026
Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
Go to All programs and select your web application designer
Select the button to create a new page in WAD
Select the chart and place in the layout
Next goto Data provider Target and select your query
Give your report name in the given data provider screen
Select your query in History/find/Favourites/Infoareas button
Select your query in this screen and click OPEN
Now we can see the data provider is assigned to the chart.
To edit the chart you have to right click on the chart
After right click on it we will find another screen where we can edit all the settings
In this screen we can find NEXT click button to change our settings
In this screen we can state the tasks (Title, units, values, range)
In this screen we can change our background /validity/color
In this screen we can add values to the chart
In this screen we can add validity/positions/order/axis types to the chart
In this screen we can change the global settings/and overview of the chart.
This screen shows that we have customized the chart successfully
After successful creation of the chart we have to save the chart
Save your chart in your favorites by giving the description and technical name in the given block.
Now execute your WAD by selecting the execute button
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

How to create the Web application designer

Hello BW Guru's,
how to create the WAD... step by step procedure and where to save the report and how to excute the report.
please send as soon as possible.
Thanks
Sudha

hi,
you can also refer to the following links.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f11a7e3-0601-0010-52a2-c3fbbdb068da
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a8cd1f71-0a01-0010-4783-f119b6132d25?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078 [original link is broken]
hope it helps,
regards,
Parth.

How to create the Table of Content (TOC) in WEB

Dear Sir
Please help me
How to create the Table of content (TOC) in Web Intelligence Report,
Thanks
Gnanasekarn.K
Edited by: Gnanasekaran Kandasamy on Nov 20, 2008 11:12 AM

Hi Gnanasekarn,
You can create TOC in webi using Open Document, You can create link on the TOC and you can connect that link to open new report .
With the help of open document you can open the specific portion of report.
So you can achive your requirement using URL reporting or Open Document.
Regards,
Chaitanya Deshpande

How to create the Transport of copies programatically

Similar Messages

Maybe you are looking for