How to create the variant conditions in VK13
Can anyone plz tell me how to create the variant conditions in VK13.
Thanks in advance.
Hi Suresh,
not sure if this is what you meant.. in VK13 enter the condition for which you want to maintain variant & press
enter.. fill in the Sales Orgn,Distbn Channel & Divion Values.. Use the menu option Edit> save as Variant> enter the variant name & desc and SAVE..
Regards,
Suresh Datti
Similar Messages
-
How to creat the Varient for 1099MISC With Holding Tax
How to create the Variant for 1099MISC With Holding Tax ?
HI,
please follow the below steps to create variant at report.
tcode se38
report RFIDYYWT
pass all the parameters
press save icon
give variant name
retrive the variant in report
tcode se38
report name RFIDYYWT
press : shift + F5
or get varinat icon.
I hope above will resolve your issue.
Regards
Madhu M -
How to identify the user who created the variant
Hi All,
Can anyone tell me how to identify the user who created the variant ?Hi Dear,
For the same go to SE11 and view the table "VARID". This table give the details of the program,user,variant etc.
From this table u can know which user created the variant. Hope this solve your purpose.
Regards -
How to create the variable variant in process chains for ip
how to create the variable variant in process cahins for ip
Hi venky,
check these links
http://help.sap.com/saphelp_nw70/helpdata/EN/c0/980398e58611d194cc00a0c94260a5/content.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/c0/98038ce58611d194cc00a0c94260a5/content.htm
bhaskar -
How to create a variant to a maintenance view (trans: SM31)
Hi gurus.
I have created a maintenance view (called z_jest). By running it from SM31 there is a variant option. However, I am not able to create the variant which I want to filter a selection upon in this transaction.
I have even looked into transaction SE54 and created a variant for the maintenance table view there( called z_jestv). Then going back to transaction SM31 and view z_jest, i push 'Variant' radiobutton and type as variant: 'z_jestv', I only get the message: "Variant z_jestv for object z_jest does not exist".
Can anybody please advice on how to create and/or connect the variant to the maintenance view?
Regards LL.Hi Mahalakshmi
Thanks for reply.
When I look into the procedure, there is a prerequisite: "The basis dialog for which the maintenance variant is created already exists."
I am a little bit unsertain if I miss this 'Basic dialog'. Can you please advice on how to check / create this 'basic dialog' before I go on to create the variant. (I need this 'basic dialog' as input in the procedure you sent.)
(Note: I have already created a 'maintenance dialog' for the view, but I have a feeling, that is something different...) -
MMPV - Close period - How to create a variant
Hello all,
Transaction MMPV is used to close the MM period and open a new one. Currently, we run this transaction every month MANUALLY.
We would like to create a variant that will open the new period automatically every month. The only problem is the period / year that changes every month (I do not know how to create a variant with changed values - if it is at all possible).
How can we create a variant that will run every month to close the MM period ?
Thanks for your help,
IsaacHello Isaac
It is possible......But to make it happen you need to go with date field and not with Period and year.
Steps -
1 - Enter field FROM Comp Code and TO Comp Code
2 - Enter the date (E.g - 05-Mar-2007)
3 - Save as varient....Give the varient names as required.
4 - Activate the 4th checkbox (Selection variable) in front of date field
5 - Click on button 'Selection variable' at the top of screen.
6 - Click on YELLOW light. This will turn it GREEN. Now you have 1st light as YELLO which was previously yello.
7 - Click on the down arrow just below the yello light.
8 - Select the appropriate option and save the varient.
The day of batch job scheduling depends upon the options you selected in the 8th step.
I hope it clarifies your dought and will allow you to create the varient as per your requirement.
Best Regards
Avinash -
How to create the Access sequence for the Vendor+material+plant combination
Hi all
Please let me know How to create the Access sequence for the Vendormaterialplant combination..
Whats the use? What its effect in purhcase and taxe..
brief me pleaseHi,
you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
find the tax condition type. see in it which access sequence is attached.
if there is none then use JTAX used for taxes in India.
or you can create the similar one for your.
to create the same goto OBQ2.
new entry or copy JTAX.
and assign the access sequence to condition type.
this will resolve your problem if you just need to assign the access sequence.
regards,
Adwait Bachuwar -
How to use the Variants in SAP Transportation and what is its use ?
Hi experts,
How to use the Variants in SAP Transportation and what is its use & How to create a variant in SAP ?
Can anybody answer this ?
Regards,
ShaktiHi,
If you are asking about "slection vairants" in SPRO settings of "shipment cost document" then
When it is activated,
each user can have his own slecetion and list criteria for
1. List shippment costs:calculation
2. List shippment costs: settlement
This can be directly saved from VI01 screen by the user.
from environment> lists
This is user specific only.
Hope this helps.
Regards,
Sharan -
How to create a new Condition for tax as VAT ( 4 % ) in SAP ? .
Dear All ,
Pl guide that " How to create a new Condition for tax as VAT ( 4 % ) in SAP ? . What are all necessary requirements to do so , I need to have all steps so that i should feel very confident . For example what data is to be ticked in Control tab during cond. creation , in the same way how to put this cond. in Pricing procedure ? pl write all necessary thing which are required during this process .
Thanx & deep regrads to all in adv.
sap11In tax we can configure taxprocedure two types i.e., taxinn and tainj. If you adopt taxinn procedure if it is other than VAT condition first you have to create the condition type and then you have to go to FTXP and assign the tax required VAT percentage to the repective % to ded or non ded VAT condion type. In second step you have to assign this tax code to respective company code.
If you adopt taxinj procedure you have to a create tax code with FTXP T-code by assigning the values to the respective and save conditions.
Regards,
Bhuvan -
How to create a variant in ecatt?
Hi all,
I am new to Ecatt scripting. I hav a requirement from the user, that one ecatt is used for two sales org using two variants.
I recorded as per the requirement ( first i created one basic script and called it in a master script ). Now I need to create two variants for the master script for the sales org.
So could any one suggest how to create a variant in ecatt?
Thanks in advance.
Vijayakumar.GHello Vijay,
After recording parameterize everything whatever you want.
In parameterization table leave the value field as empty, I mean don't give any value.
Select the following in the menu,
Utilities>Test configuration>Create
Now, test configuration name will have the same of the test script name.
Provide the details in the configuration tab. Then in the variants tab select the second radio button "Internal variants".
In the variant table you can see the default variant "ECATTDEFAULT". You can make use of this also. Otherwise you can also create your own variants by clicking "Insert variant" button.
The variables whatever you have created in the test script will be there in the table. Now, Create variant and provide values for each variables.
You can also select the variants which need to be executed.
Now you can run the test configuration. It will be running number of times according to the created number of the variants.
You can also create Test data for your test script and configuration.
Try this, I hope it will help.
Feel free to reward if it helps.
Regards,
Gopi
Edited by: Gopinath K S on Oct 7, 2008 7:37 AM -
How to create a variant in VA01
Hi Gurus,
Can you teach me how to create a variant in VA01? I'd like to have a default value in the sold to party field.
Thanks,
Paulhi,
To show a default sold-to-party in this field when the user creates a sales order (VA01) we can use a function exit .This function exit is located in enhancement no V45A0002 . Before we can choose the exit we have to create a project in CMOD after that enter V45A0002 in the enhancement field and click on the components . In the components you will see the exit EXIT_SAPMV45A_002 . This exit is used for our purpose.
Double clicking on this exit will takes us to function builder (SE37) . This function exit has one exporting parameters and two importing parameters, we are interested in exporting parameter which is E_KUNNR of type KNA1-KUNNR i.e if we move the desired customer name to this structure(E_KUNNR) it will be shown in the field as the default value when we create the sales order. This function also contains a customer include ZXVVA04 . This include will be used to write our custom code .
Double clicking on this include and it will prompt us that this include does not exists do you want to create this object ,select yes and the include will be created .In this include we can write our own code that will fill the field E_KUNNR.
e.g. E_KUNNR = 301.
Activate the include and Activate the project. Now when ever the SALES ORDER will be created , sold-to-party field will come up with a predefined customer .
regards
sadhu kishore -
How to create a variant selection screen
Hi experts,
Can you tell me " How to create a variant selection screen ".
Please it's urgent.........
Thanks
BasuHi ,
Goto your selection screen
Make entries in the fileds od the selection screen
press save button, it will ask you for the mane of the Variant
Give the name of the Variant and save it
Variant is now created for the selection screen.
Reward if useful.
Regards,
Shilpi -
How to create t-code for a table and how to create transaction variant???
Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1. how to create transaction code to a table. Can any one give me the
staps??
2. how to create transaction variant for the above requirement???
Thanks & Regards,
SarkarHi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful -
How to create the pricing procedure for domestic & import.
HI,
Pls any body let me know how to create the pricing procedure for domestic & import.
what is the use of the keys
step condiiton condition type from to manual required statistic subtotal requirement caltype basetype.
how system will work based on this.Hi,
Please see below WIKI for your reference:
http://wiki.sdn.sap.com/wiki/display/ERPLO/16FieldsDescriptioninPricing+Procedure
Regards,
Ninad Kshirsagar -
How to find the start condition of a ABAP program?
Hello Gurus!,
Could any one please explain how to find the start condition of a ABAP program?
like its a event based or time based?and also how to find that event and time..
Thanks in Advance...
DinakarHi Dinkar,
Go to Job Schedule, put Job Step parameter as your program and see scheduled Job.
In Schedule Job double click to see start condition. and steps to see details and variant.
Hope it helps.
Thanks
CK
Maybe you are looking for
-
Hello All, I have a web application built using jsp, struts framework and ADF business component. Currently it's deployed on oracle application server. I have requirement where it needs to be deployed on Weblogic 11g (10.3.4. or higher) Current versi
-
Hi All, I am not able to use this statement in the PROMPTS SQL. I am getting a message saying "State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 23003] Ordering by columns not in the sel
-
Best way to change up to 20 controls on the main VI from a subVI
Hi Community, I have been searching for a good solution for this all day but couldn't come up with anything good. I have around 20 controls on my main VI. I need to access / change their properties from a subVI. ALL the controls are inside a Cluster.
-
Add buttons in Sales Order's Addtional Data B Tab
Hi All, I want to add buttons in Sales Order's Additional Data B tab. I had try to draw a creen in painter and push a button in the screen, also assign a fcode to it. I had try to test the button, and I find that, it could work, but after it's action
-
How to group this colum ?
Hi, I have this request : select b.nom, d.libelle, a.TOTAL_HEURES from observatoire.fiche a, observatoire.agent b, observatoire.activite_faite c, observatoire.activites d where equipe_id = 161 and a.agent_id = b.agent_id and a.fiche_id = c.fiche_id a