How to create this? A Flash Plugin?

I'm in CS3 / OS X I need to create the spinning effect that is in this link, I looked around and can't seem to find a way to do this.
http://www.jasonhildredesign.com/portfolio_flash/web_intro.html
any help?

No, you can use a third party app to create the images if you can't create them otherwise, but the key to creating this is placing a sequence of images in the timeline. It would be the same as if you made a little page flip animation, where each page has a different stage of motion position. Based on the speed of this one, I wouldn't be surprised if it only has a few images for each spin illusion.

Similar Messages

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

Can anyone tell me how to do this in Flash? See the following link?

Can anyone tell me how to do this in Flash? See the following
link?
See this link. I want to know how to create the painting
excercise as made here.
http://disney.go.com/disneychannel/playhouse/littleeinsteins/activities/paint.html

Start by looking at the drawing api for AS

How to create dynamic ed flash charts based on user selected fields in Orac

Hi all,
Can any of the experts please tellme "how to create dynamic ed flash charts based on user selected fields in Oracle apex".
Thanks
Manish

Hello,
Lots of different ways to do this, I blogged about one way (using a Pipelined function) here -
http://jes.blogs.shellprompt.net/2006/05/25/generic-charting-in-application-express/
Other options include using a PL/SQL function returning the string to use as the dynamic query etc.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

How to intercept the Adobe Flash plugin block by firefox checking for vulnerabilities?

The trouble is the grey block, that asking to update Adobe Flash because the version is vulnerability. If the block of Flash object is smaller, then 100px height - there is an empty space, but not gray block with talking about version. I need to intercept the moment using JavaScript, when Firefox checking the version of plugin to make changes in my HTML code to make a GIF, but not flash.
How to intercept the Adobe Flash plugin block by Firefox checking for vulnerabilities from JavaScript code?

hello, i don't think that this would be possible (but i'm not sure). what you could do is try to sniff the version of flash that is installed & the firefox useragent and just assume that old versions of the plugin will be blocked in this combination.
if you need more help about that, i'd recommend posting in a forum that is more specialized & knowledgeable in web development like http://forums.mozillazine.org/viewforum.php?f=25, since we here on the firefox support forums are primarily focused on support for end-users...

How can create a Simple Flash Preloader

Hi ,
How can create preloader in flash (AS2).
Please help me.

put a textfield on stage in frame 1. assign its instance name to be tf in the properties panel. change your code to:
kglad wrote:
stop();
this.onEnterFrame=function(){
var bl:Number=this.getBytesLoaded();
var bt:Number=this.getBytesTotal();
tf.text=Math.round(100*bl/bt);
// you can use bl and bt to animate your movieclip, if you have one
if(bl==bt){
delete this.onEnterFrame;
play();

How to create this Hieararchical Tree?

Hi All,
Please help me on this issue.
I need DRILL DOWN functionality in forms. Im trying to Study / Create Hierarchi Tree Concept in Forms 6i, but couldn't able to manage /Understand how to create this. Please any one could help me. and im giving my scenario also here, whether it can support or not.
Our routes having lot of terminals, like Our Bus travels from KENYA to SOUTH AFRICA passing TANZANIA,ZAMBIA,MALAWI,BOTSWANA countries. so i need the No of records to be dynamic i cant fix 10 records and scroll etc, Rather im trying to use Heirarchi Trees to achive this.
My Table is like this.
Table #1 Route_quotas
Route_no,terminal_name,quota_station_from,quota_station_to,no_of_seats,seat_no_start_from,seat_no_ending
Data is Like this:
1,GNT,GNT,HYD,10,1,10
1,GNT,GNT,VJA,40,11,50
1,VJA,VJA,KDD,10,11,20
1,VJA,VJA,HYD,30,21,50
I need data to be displayed / functoned like this. If One select Route_no 1 in a List_item. Down to that i should show which terminals having quotas in this route. those are.
GNT
VJA
Next ... If One selects this node like if one Expands GNT node the sub nodes should be like this having three coulmns (i.e quota_station_from,quota_station_to,no_of_seats columns)
GNT HYD 10
GNT VJA 40
Next again.. if One select the first subnode it should give ...the seat Nos
1,2,3,4,5,6,7,8,9,10 (please Omit the commas) and from there i should be able to select one seat_no and do some actions based on that. like RESERVE or ISSUE what ever i like. i need that Seat_no value.
GNT
........GNT HYD 10
................ 1 2 3 4 5 6 7 8 9 10
........GNT VJA 40
................11 12 13 14 15....50
VJA
........VJA KDD 10
................11 12 13 14 15 16 17 18 19 20
........VJA HYD 30
................21 22 23 24 ...... 50
Thanks in advance.

Rama,
I would use nested PLSQL cursors to populate a record group and create the tree from there. This way you can also concatinate multiple values to show as a single name in a tree.
Frank

Can anyone explain how to create this effect in Deamweaver and Fireworks?

This site was oriinally done in dreamweaver - but the shadow
effect was done
outside of Dreamweaver. When I save to html and load into
Dreamweaver it
makes no sense to me.
Can anyone explain how to create this effect in Deamweaver
and Fireworks?
http://www.fundflowsystems.com/test.php
Thanks in advance,
Joe

Thank you so much...
You is da bomb!
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Yes - a blank (completely blank) page.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Ken Binney" <[email protected]>
wrote in message
> news:[email protected]...
>> Murray, one more favor if you would be so kind...
>> Do you recall how this page degraded in Safari?
>>
>>
http://www.binney.us/table-allcode.htm
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>> Nope. Sorry. You need a Mac.
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "Ken Binney"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> Thanks Murray...
>>>>
>>>> Is there a way I can test for Safari on my
PC XP ?
>>>>
>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Fails in Safari, Ken.
>>>>>
>>>>> --
>>>>> Murray --- ICQ 71997575
>>>>> Adobe Community Expert
>>>>> (If you *MUST* email me, don't LAUGH
when you do so!)
>>>>> ==================
>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>>> ==================
>>>>>
>>>>>
>>>>> "Ken Binney"
<[email protected]> wrote in message
>>>>>
news:[email protected]...
>>>>>> Here is a solution requiring NO
images.
>>>>>> The CSS and the Javascript can
easily made remote the page
>>>>>>
>>>>>> <!DOCTYPE HTML PUBLIC
"-//W3C//DTD HTML 4.01 Transitional//EN"
>>>>>> "
http://www.w3.org/TR/html4/loose.dtd">
>>>>>> <html>
>>>>>> <head>
>>>>>> <title>Shadow</title>
>>>>>> <meta http-equiv="Content-Type"
content="text/html;
>>>>>> charset=iso-8859-1">
>>>>>> <script
type="text/javascript">
>>>>>> var depth = 6 // in pixels
>>>>>>
>>>>>> // addLoadEvent t
>>>>>> function addLoadEvent(func) {
>>>>>> var oldonload = window.onload;
>>>>>> if (typeof window.onload !=
'function') {
>>>>>> window.onload = func;
>>>>>> } else {
>>>>>> window.onload = function() {
>>>>>> if (oldonload) {
>>>>>> oldonload();
>>>>>> }
>>>>>> func();
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> addLoadEvent(function() {
>>>>>>
>>>>>> var a = document.all ? document.all
>>>>>> document.getElementsByTagName('*');
>>>>>> for (var i = 0;i < a.length;i++)
>>>>>> if (a
.className == "shadow") {
>>>>>> for (x = 0;x < depth;x++) {
>>>>>> var newSd =
document.createElement("DIV")
>>>>>> newSd.className = "shadow2"
>>>>>> newSd.style.background = a.id
>>>>>> newSd.style.width = a
.offsetWidth + "px"
>>>>>> newSd.style.height =
a.offsetHeight + "px"
>>>>>> newSd.style.left = a
.offsetLeft + x + "px"
>>>>>> newSd.style.top = a.offsetTop +
x + "px"
>>>>>> document.body.appendChild(newSd)
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> );
>>>>>>
>>>>>> </script>
>>>>>> <style>
>>>>>> .shadow {
>>>>>> border: 1px solid silver;
>>>>>> padding: 2px;
>>>>>> font: 10pt arial;
>>>>>> position: relative;
>>>>>> display: inline;
>>>>>> background: white;
>>>>>> z-index: 100
>>>>>> }
>>>>>> .shadow2 {
>>>>>> overflow: hidden;
>>>>>> position: absolute;
>>>>>> filter: alpha(Opacity=15); /* modify
to change the shade
>>>>>> solidity/opacity, same as below */
>>>>>> opacity: 0.1; /* firefox 1.5 opacity
>>>>>> -moz-opacity: 0.2; /* mozilla
opacity */
>>>>>> -khtml-opacity: 0.1; /* opacity */
>>>>>> z-index: 10
>>>>>> }
>>>>>> </style>
>>>>>>
>>>>>> </head>
>>>>>>
>>>>>> <body>
>>>>>> <table width="800" border="0"
align="center" cellpadding="0"
>>>>>> cellspacing="0" class="shadow"
id="#000000">
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> </table>
>>>>>> </body>
>>>>>> </html>
>>>>>>
>>>>>>
>>>>>>
>>>>>> "Joe"
<[email protected]> wrote in message
>>>>>>
news:[email protected]...
>>>>>>>
>>>>>>> This site was oriinally done in
dreamweaver - but the shadow effect
>>>>>>> was done outside of Dreamweaver.
When I save to html and load into
>>>>>>> Dreamweaver it makes no sense to
me.
>>>>>>>
>>>>>>> Can anyone explain how to create
this effect in Deamweaver and
>>>>>>> Fireworks?
>>>>>>>
>>>>>>>
http://www.fundflowsystems.com/test.php
>>>>>>>
>>>>>>> Thanks in advance,
>>>>>>>
>>>>>>> Joe
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

How to create this cool navigation bar in CS5 Dreamweaver

Dear All,
Can somebody please walk me through how to create this cool navigation bar?
Please see the link below:
http://www.viesso.com/viesso/home.php
Thank you for all your help!
I am designing my own website and I stuck at the beginning...
Agi

You can either use CSS to style the SpryMenuBar or there are commercially available options like Project Seven's Pop Menu Magic: http://www.projectseven.com/products/menusystems/pmm2/index.htm . If you have the money I personally recommend the latter of the two, but you can easily style the Spry menu as well.

[b]How to create this Custom Table on Custom Schema with foreign key [/b]

This Custom Table is create in Custom Schema and Refers to Seeded Table in APPS schema
1 create table test_dff (test_id number(15) primary key,
2* invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE)
SQL> /
invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE
ERROR at line 2:
ORA-02270: no matching unique or primary key for this column-list
How to create this Custom Table on Custom Schema
thanks in advance

hi prashant
sorry for replying late, i have checked your query and it gives me no rows, but if i check for user_cons_columns it gives me no rows either in APPS Schema, but in AP schema it gives me
SQL> SELECT * FROM user_cons_columns WHERE table_name = 'AP_INVOICES_ALL';
OWNER CONSTRAINT_NAME TABLE_NAME
COLUMN_NAME
POSITION
AP SYS_C008177 AP_INVOICES_ALL
INVOICE_ID
SQL> SELECT constraint_name, constraint_type FROM user_constraints WHERE table_name = 'AP_INVOICES_A
LL';
CONSTRAINT_NAME C
SYS_C008177 C
SYS_C008178 C
SYS_C008179 C
SYS_C008180 C
SYS_C008181 C
SYS_C008182 C
SYS_C008183 C
SYS_C008184 C
SYS_C008185 C
SYS_C008187 C
SYS_C008189 C
SYS_C008191 C
and since this is a combination of Unique and Not Null Constraints , i am getting the same issue. do u have any solution to make the Detail table records to delete without using Alerts/DB Triggers?
thanks for your time .
abdul rahman

How to make this in Flash Builder?

I am looking to make an Android app and one of the functionalities is somehting like in the video.
I am new to Flash Builder and looking for some help to make it.
Anyone has a tutrial or has any idea how to make this?
Android SQLite App Development with Flash Builder and Flex - YouTube

I'll give you the short answer, Flash Catalyst is built on top of the Flex Framework and it's libraries. When you launch or load a FC swf, it will contact the Adobe servers to check the status of various libraries. Since you are loading this into a standard Flash Professional created swf, you are by passing some of the fallbacks that exist.
If the movieClip that you are creating is just a filler image, and you are just centering the FC swf, then I also recommend using CSS to display the filler and some HTML/CSS to center the content.
Hope this helps a little.
If you did the loading of the FC swf from a Flash Builder based project, you should not have the issue, since it is a Flex based SWF, the framework checks are already handled for you.
Chris

How to create this png overlay-on-swf nice effect in DW CS4?

Hi - any ideas on how, in DW CS4, to create this very well done effect?
It has a png alpha image overlay on top of a swf video, and looks nice:
http://www.digitaljuice.com/products/products.asp?pid=1154
Not sure the exact code to use w/flashvars, z-axis settings, tables to achieve this. Any ideas?
Thanks!

If you look at the page's source code, the answers are all there.
The Flash is embedded using a setting of wmode="transparent", which sets it up for a couple of useful purposes... it makes the Flash's background transparent (which is probably not the purpose sought in the instance)... and it makes the Flash embed in the page such that objects can be placed atop it.
Just below the Flash embedding code (~line 838) you will find the code for the image (~line 847) and the identification of the css id assigned for it ('overlay-image'). All of the css code is included in the source code, so you just need to search for that definition to see the properties assigned for it.

How 2 create frames & insert flash

Can anyone help me insert a frame into a page created with iweb 08.
Also I would like to have an intro page before my site which shows a flash animation i have- When the user user clicks continue to main site or skip intro I want this page to remain playing music in the background.
How do I insert a flash animation into a page?
Thanks!

iFrame for iWeb - Adding a Page Inside a Page...
http://web.mac.com/catucker/InsideOutside/iFrame.html
Flash Files in iWeb - Adding Flash to iWeb...
http://web.mac.com/catucker/InsideOutside/Flash.html

How to create animated xml flash gallery ?

I am a new starter . I want to create a xml flash gallery ,
but i dnt know how to create it ....Can any one let me know what is
the procedure to do this dynamically .....
Thanks

If you are using Actionscript 3, there is a pretty good
tutorial on working with XML files here:
http://www.gotoandlearn.com/player.php?id=64
The home page of that site provides numerous other tutorial
links that may come in handy for you in other projects.
You will also need to become familiar with the Loader object
and the addChild method in order to dynamically insert externally
stored images. Look for the "Loading display objects" section in
the Flash help documentation.
I'd recommend just getting one image to load/display to
become familiar, then you can decide how you want/need to make the
rest of the design work.

How can I enable blocked flash plugin on firefox?

A couple of days ago, my computer (mac OS X 10.4.11 PPC) suddenly seemed to stop recognizing that I had flash installed and wouldn't play anything requiring flash - instead a message came telling me to install it.
I uninstalled flash and the installed the latest version for my computer from the adobe website (which is 10.1.102.64).
Computer still thinks flash isn't installed and when I checked plugins I discovered firefox has blocked it telling me the version of flash I want to use is too old (even though the version I've downloaded is the latest I can use with my computer).
How can I enable the plugin on firefox so I can use flash? The 'enable' button on the plugin has been greyed out so I can't press it.
Please help - I'm rubbish with computers so please give any advice in very simple language! ( i have firefox 3.0.4)

hello this should not have happened - mozilla recently uses the blocklist feature to notify users about the outdated flash plugin but not block it.
you'd have to trigger a manual update of the blocklist and hope that this time the correct version is retrieved.
go to tools > web-developers > error console & copy the following line into the code field & hit evaluate:
''Components.classes['@mozilla.org/extensions/blocklist;1'].getService(Components.interfaces.nsITimerCallback).notify(null);''
sorry for the computer gibberish. afterwards restart the browser & see if you can enable the plugin in the addons manager again.

How to create this? A Flash Plugin?

Similar Messages

Maybe you are looking for