How to create this texture?

this is a common texute I've seen around, but I am not very familar with the filters in photoshop/illustrator, can any boday help me to finally figure this out?
Thanks in advance!

Gary, if you look closely, you can see a fine dot pattern overlaying the image, and that would probably be better described as a texture than the cartoon like reduced colour bit depth.
You can add the fine dots using Filter > Sketch > Half tone. Add a new layer above the graphic, and fill with 50% grey. Apply the Halftone filter to it, and set its blend mode to Overlay. It's the same method as non destructive dodge and burn, or course, but it works very nicely for adding noise, or texture non-destructively. You can edit the texture layer directly, or do a non-destructive edit to your non-destructive texture, by clipping a levels or curves adjustment layer to it.

Similar Messages

How to create this texture in photoshop? See image.

I'm trying to replicate this background texture in Adobe Photoshop CS5. Can anyone give me a few pointers as to how this will work? I'll give you an update with any suggestions provided. Thanks

alohaDees wrote:
When I tried getting help the first time, I uploaded the image via URL instead of Desktop, thus creating a link that pointed towards the picture. Instead of accusing new users of spamming, you should try welcoming them instead.
I posted a comment in the thread saying it looked to me like spam, but I didn't report it, so a forum admin must have spotted it and thought the same. Since you are posting under a new user name I assume they disabled your first user account as well. Even if unintentionally, you posted a linked advertisement (= spam), so you needn't be surprised or offended at the reaction. The thing is to avoid doing that in the future. Welcome and good luck!

How do I create this texture?

I need to create this texture for the background of something I am working on. I am making a business logo for a woman, and she very specifically asked for this texture. I would have copied it directly from the picture she provided me, but it's very low quality and gets pixilated if I make it even a little bit bigger. I need to replicate the texture from the background of this image:
Any ideas? I've tried using different tons of brushes and filters, but I just can't get it quite right and I'm getting pretty frustrated.
Thanks!!!

The trick is to start with the right image. it looks like tree bark to me, so search Google for 'bark', go to Images, and click on Large. Find a bark pattern that suits, and copy into photoshop. Go Image > Adjust > Threshold, and drag the slider over to the left to get a mostly white image. Job more or less done, but dtretch with Free transform if the patern is too dense. Place it over a plain coloured background, and set Blend mode to Darken.

How to create noise texture - Illustrator Tips

Hello. I saw this piece of art on one of the Illustrator tips & techniques section, and was wondering if someone knew how to create this "noise" texture in Illustrator?
What I've had to do in the past to get a similar effect was to complete my illustration in Illustrator, then bring that artwork into Photoshop and paint over the desired areas... but this looks a lot nicer than the results I've gotten. If this can be done in vector, that would be another plus!
Does anyone have any insight they could share on this?
Thank you!

You are welcome.
The site of which that tutorial is a part (HERE) has a lot of good tutorials, including a few more about adding texture in Illustrator.
--OB

How to create a textured background

Hi,
I am very new to Java3D and I need help on how to create a textured background instead of using plain colors. I want to use a jpeg file for the background. Could anyone tell me a sample algorithm that will load this jpeg file and then set it up as the Scene's background?
Thank you,
Rubydium.

What you want to do is create a background node and add an object textured on the inside. Here is a bit of sample code:
BranchGroup bgGeometry = new BranchGroup();
Appearance App = new Appearance();
try {
   Texture tex = new TextureLoader(new java.net.URL(filePath+"yourTexture.jpg"), this).getTexture();
   App.setTexture(tex);
catch (Exception e)
    e.printStackTrace();
Sphere outerWorld = new Sphere( 1.0f, Primitive.GENERATE_TEXTURE_COORDS | Primitive.GENERATE_NORMALS_INWARD, App);
bgGeometry.addChild(outerWorld); As you can probably tell, this is just creating a new BranchGroup and appearance and populating it with a sphere that displays it's appearance inwards.
Background bg = new Background();
bg.setApplicationBounds(bounds);
bg.setGeometry(bgGeometry);
objRoot.addChild(bg);

How to create this Hieararchical Tree?

Hi All,
Please help me on this issue.
I need DRILL DOWN functionality in forms. Im trying to Study / Create Hierarchi Tree Concept in Forms 6i, but couldn't able to manage /Understand how to create this. Please any one could help me. and im giving my scenario also here, whether it can support or not.
Our routes having lot of terminals, like Our Bus travels from KENYA to SOUTH AFRICA passing TANZANIA,ZAMBIA,MALAWI,BOTSWANA countries. so i need the No of records to be dynamic i cant fix 10 records and scroll etc, Rather im trying to use Heirarchi Trees to achive this.
My Table is like this.
Table #1 Route_quotas
Route_no,terminal_name,quota_station_from,quota_station_to,no_of_seats,seat_no_start_from,seat_no_ending
Data is Like this:
1,GNT,GNT,HYD,10,1,10
1,GNT,GNT,VJA,40,11,50
1,VJA,VJA,KDD,10,11,20
1,VJA,VJA,HYD,30,21,50
I need data to be displayed / functoned like this. If One select Route_no 1 in a List_item. Down to that i should show which terminals having quotas in this route. those are.
GNT
VJA
Next ... If One selects this node like if one Expands GNT node the sub nodes should be like this having three coulmns (i.e quota_station_from,quota_station_to,no_of_seats columns)
GNT HYD 10
GNT VJA 40
Next again.. if One select the first subnode it should give ...the seat Nos
1,2,3,4,5,6,7,8,9,10 (please Omit the commas) and from there i should be able to select one seat_no and do some actions based on that. like RESERVE or ISSUE what ever i like. i need that Seat_no value.
GNT
........GNT HYD 10
................ 1 2 3 4 5 6 7 8 9 10
........GNT VJA 40
................11 12 13 14 15....50
VJA
........VJA KDD 10
................11 12 13 14 15 16 17 18 19 20
........VJA HYD 30
................21 22 23 24 ...... 50
Thanks in advance.

Rama,
I would use nested PLSQL cursors to populate a record group and create the tree from there. This way you can also concatinate multiple values to show as a single name in a tree.
Frank

Can anyone explain how to create this effect in Deamweaver and Fireworks?

This site was oriinally done in dreamweaver - but the shadow
effect was done
outside of Dreamweaver. When I save to html and load into
Dreamweaver it
makes no sense to me.
Can anyone explain how to create this effect in Deamweaver
and Fireworks?
http://www.fundflowsystems.com/test.php
Thanks in advance,
Joe

Thank you so much...
You is da bomb!
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Yes - a blank (completely blank) page.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Ken Binney" <[email protected]>
wrote in message
> news:[email protected]...
>> Murray, one more favor if you would be so kind...
>> Do you recall how this page degraded in Safari?
>>
>>
http://www.binney.us/table-allcode.htm
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>> Nope. Sorry. You need a Mac.
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "Ken Binney"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> Thanks Murray...
>>>>
>>>> Is there a way I can test for Safari on my
PC XP ?
>>>>
>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Fails in Safari, Ken.
>>>>>
>>>>> --
>>>>> Murray --- ICQ 71997575
>>>>> Adobe Community Expert
>>>>> (If you *MUST* email me, don't LAUGH
when you do so!)
>>>>> ==================
>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>>> ==================
>>>>>
>>>>>
>>>>> "Ken Binney"
<[email protected]> wrote in message
>>>>>
news:[email protected]...
>>>>>> Here is a solution requiring NO
images.
>>>>>> The CSS and the Javascript can
easily made remote the page
>>>>>>
>>>>>> <!DOCTYPE HTML PUBLIC
"-//W3C//DTD HTML 4.01 Transitional//EN"
>>>>>> "
http://www.w3.org/TR/html4/loose.dtd">
>>>>>> <html>
>>>>>> <head>
>>>>>> <title>Shadow</title>
>>>>>> <meta http-equiv="Content-Type"
content="text/html;
>>>>>> charset=iso-8859-1">
>>>>>> <script
type="text/javascript">
>>>>>> var depth = 6 // in pixels
>>>>>>
>>>>>> // addLoadEvent t
>>>>>> function addLoadEvent(func) {
>>>>>> var oldonload = window.onload;
>>>>>> if (typeof window.onload !=
'function') {
>>>>>> window.onload = func;
>>>>>> } else {
>>>>>> window.onload = function() {
>>>>>> if (oldonload) {
>>>>>> oldonload();
>>>>>> }
>>>>>> func();
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> addLoadEvent(function() {
>>>>>>
>>>>>> var a = document.all ? document.all
>>>>>> document.getElementsByTagName('*');
>>>>>> for (var i = 0;i < a.length;i++)
>>>>>> if (a
.className == "shadow") {
>>>>>> for (x = 0;x < depth;x++) {
>>>>>> var newSd =
document.createElement("DIV")
>>>>>> newSd.className = "shadow2"
>>>>>> newSd.style.background = a.id
>>>>>> newSd.style.width = a
.offsetWidth + "px"
>>>>>> newSd.style.height =
a.offsetHeight + "px"
>>>>>> newSd.style.left = a
.offsetLeft + x + "px"
>>>>>> newSd.style.top = a.offsetTop +
x + "px"
>>>>>> document.body.appendChild(newSd)
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> );
>>>>>>
>>>>>> </script>
>>>>>> <style>
>>>>>> .shadow {
>>>>>> border: 1px solid silver;
>>>>>> padding: 2px;
>>>>>> font: 10pt arial;
>>>>>> position: relative;
>>>>>> display: inline;
>>>>>> background: white;
>>>>>> z-index: 100
>>>>>> }
>>>>>> .shadow2 {
>>>>>> overflow: hidden;
>>>>>> position: absolute;
>>>>>> filter: alpha(Opacity=15); /* modify
to change the shade
>>>>>> solidity/opacity, same as below */
>>>>>> opacity: 0.1; /* firefox 1.5 opacity
>>>>>> -moz-opacity: 0.2; /* mozilla
opacity */
>>>>>> -khtml-opacity: 0.1; /* opacity */
>>>>>> z-index: 10
>>>>>> }
>>>>>> </style>
>>>>>>
>>>>>> </head>
>>>>>>
>>>>>> <body>
>>>>>> <table width="800" border="0"
align="center" cellpadding="0"
>>>>>> cellspacing="0" class="shadow"
id="#000000">
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> </table>
>>>>>> </body>
>>>>>> </html>
>>>>>>
>>>>>>
>>>>>>
>>>>>> "Joe"
<[email protected]> wrote in message
>>>>>>
news:[email protected]...
>>>>>>>
>>>>>>> This site was oriinally done in
dreamweaver - but the shadow effect
>>>>>>> was done outside of Dreamweaver.
When I save to html and load into
>>>>>>> Dreamweaver it makes no sense to
me.
>>>>>>>
>>>>>>> Can anyone explain how to create
this effect in Deamweaver and
>>>>>>> Fireworks?
>>>>>>>
>>>>>>>
http://www.fundflowsystems.com/test.php
>>>>>>>
>>>>>>> Thanks in advance,
>>>>>>>
>>>>>>> Joe
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

How to create grid texture in Photoshop?

How to create grid texture in Photoshop?

Christoph points out a very good method for creating your own grid pattern.
There is one already provided that may be sufficient. Choose Edit - Fill - Pattern, load the standard Patterns set, and choosing the grid pattern Tiles-Smooth from the provided Patterns...
-Noel

How to create this cool navigation bar in CS5 Dreamweaver

Dear All,
Can somebody please walk me through how to create this cool navigation bar?
Please see the link below:
http://www.viesso.com/viesso/home.php
Thank you for all your help!
I am designing my own website and I stuck at the beginning...
Agi

You can either use CSS to style the SpryMenuBar or there are commercially available options like Project Seven's Pop Menu Magic: http://www.projectseven.com/products/menusystems/pmm2/index.htm . If you have the money I personally recommend the latter of the two, but you can easily style the Spry menu as well.

[b]How to create this Custom Table on Custom Schema with foreign key [/b]

This Custom Table is create in Custom Schema and Refers to Seeded Table in APPS schema
1 create table test_dff (test_id number(15) primary key,
2* invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE)
SQL> /
invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE
ERROR at line 2:
ORA-02270: no matching unique or primary key for this column-list
How to create this Custom Table on Custom Schema
thanks in advance

hi prashant
sorry for replying late, i have checked your query and it gives me no rows, but if i check for user_cons_columns it gives me no rows either in APPS Schema, but in AP schema it gives me
SQL> SELECT * FROM user_cons_columns WHERE table_name = 'AP_INVOICES_ALL';
OWNER CONSTRAINT_NAME TABLE_NAME
COLUMN_NAME
POSITION
AP SYS_C008177 AP_INVOICES_ALL
INVOICE_ID
SQL> SELECT constraint_name, constraint_type FROM user_constraints WHERE table_name = 'AP_INVOICES_A
LL';
CONSTRAINT_NAME C
SYS_C008177 C
SYS_C008178 C
SYS_C008179 C
SYS_C008180 C
SYS_C008181 C
SYS_C008182 C
SYS_C008183 C
SYS_C008184 C
SYS_C008185 C
SYS_C008187 C
SYS_C008189 C
SYS_C008191 C
and since this is a combination of Unique and Not Null Constraints , i am getting the same issue. do u have any solution to make the Detail table records to delete without using Alerts/DB Triggers?
thanks for your time .
abdul rahman

How can I creat this texture in illustrator

hello
I'm using illustrator CS5 and i want to creat an art brush with applying this texture in it. as you can see in the picture
this is my first try but i was not satisfied with this result
i zoom it in > it is consist of small squares with diffirent colors
i hope you get what i mean,
plz reply as soon as possible
thanks in advance

Art brushes in Illustrator CS5 can only contain vector artwork. So it will be very difficult to achieve what you want.
You can try to use live trace to get a vector version of your image, but you need to simplify it.
Depending on what you need this for, there might be better methods than a brush.

How to create Tortoise texture - Sunglasses style

Hello guys,
this is my first post
I am getting crazy figuring out how to create with photoshop a texture like these sunglasses:
http://aqquim.com/collections/retrosuperfuture/products/super-ciccio-vintage-havana
http://aqquim.com/collections/retrosuperfuture/products/super-classic-puma
I need it in order to print on plexiglass pannel for my room.
Can you guys recommend me a tutorial? I would like to learn.
Thank you advance.

Thanks a lot for the tutorials
In the specific i am looking for something like this... this so cool?

How to create this chart in Numbers?

The sample chart such as following web site:
http://gallery.mac.com/chouwenpo#100008/-E5-9C-96-E7-89-87-203&bgcolor=black
I want to create this chart by "line+symbol chart".
The x-axis need to be an "interval".
Please, help me if you know how to do this.
Thank you a lot.
wenpo

I do appreciate your kindness reply.
Please let me repost my question and express my concern again
I look forward from you guys.^^ I do need your help!
Thanks again.
<<Question repost>>
for example:
Assume we have 10 (x, y) pairs as below:
(10,10), (12,23), (47,9), (63,24), (88,100), (150,41) ,(155,166), (188,2), (198,58) and (500,200). Each (x,y) pair is a single point in the graph.
If we use Scatter chart to handle these data, the output graph is fine but not suitable for me to use.
I wish there will be a trend line between two of each independent points of Scatter graph, and obtain a graph just like the output graph as used in Line chart (line+symbol).
That is, in Line chart, the values of x-axis(with equal-width intervals) are categorical; however, my data is ordinal value or continuous value (like Time, Concentration...etc.). I wish this software has the ability to show the interaction between each points.
Message was edited by: wenpo

How to create this lighting effect in Premiere Pro or After Effects?

Hey,
I'm a student and premiere beginner and I'm trying to make my first video in premiere. In this video, Drawing Channing Tatum - YouTube , you will see that lighting effects in the first 10 seconds. How can i create this?
I thank you so much!
Marie

That is stock footage of the ends of a film roll exposed to light during the loading process that is simply laid over the video with the add or screen blend mode applied. You can search for "film damage" stock footage and find something that would work from stock footage houses. You can fake your own with shape layers, blurs and opacity animations using the same add or screen blend mode. It's just much harder to get the film damage to look "real."
Here's what my google search turned up as the first link to stock footage. I have no relationship with this company and have never used their footage.
http://www.pond5.com/stock-footage/20486672/film-burn-light-transitions.html
You could also just get your smart phone close to a lightbulb, make sure it's out of focus and then move it around.

How to create this type of Form?

Hello ,
I'm new to java so I would like a hint from experts on how to create such a form :
A form that displays Customer's Codes and their name from Oracle database , so that they appear in the form as a list of 2 columns , what kind of compnents I should use to display this kind of data ? JTextField ? I dont think so .... . And also I would like to highlight each other line so that the list looks good , then at the top of the list I want a filter so that the data is filtered each time I enter a character . The last thing is how to make the data displayed have the ability to be dragged to another form in the application so that it fills the corresponding fields relative to the data dragged ?
Too much ha? . Please just provide hints/ideas about each point as I know it can be time consuming to give details about all this.
Thanks in advance...

Thank you , I tried with this code to achieve what I wanted but I get no result .
Can you please tell me whats wrong with this code ?
package desktopapplication1;
import java.sql.*;
import javax.swing.*;
import java.awt.*;
public class MainOMSWindow extends JPanel{
    public MainOMSWindow ()
        super(new GridLayout(1,0));
JTable customerListTable = new JTable();
customerListTable.setPreferredScrollableViewportSize(new Dimension(500, 70));
customerListTable.setFillsViewportHeight(true);//to make the table uses the entire height of the container
    JScrollPane pane = new JScrollPane(customerListTable);
    add(pane);
    populateTable(customerListTable);
    private static Connection getConnection()
    Connection con = null;
     try
        String driverName = "oracle.jdbc.driver.OracleDriver";
        Class.forName(driverName);   //registering JDBC Driver
        String serverName = "localhost";
        String portNumber = "1521";
        String sid = "mydb";
        //jdbc:oracle:thin:@localhost:1521:ahmaddb
        String url = "jdbc:oracle:thin:@" + serverName + ":" + portNumber + ":" + sid;
        String user = "fundinfo";
        String pw = "tadapps";
        con = DriverManager.getConnection(url, user, pw);
     catch (ClassNotFoundException e) {
                                    System.out.println(e.getMessage());
                                    System.out.println(e.getStackTrace());
                                    System.out.println(e.getCause());
                                    System.out.println(e.getException());
                                    System.exit(0);
     catch (SQLException e) {
                              System.out.println(e.getMessage());
                              System.exit(0);
    return con;
    private static ResultSet useConnAndGetData()
        Connection con = getConnection();
    try
         Statement stmt = con.createStatement();
         String select = "select title,year,price from movie order by year";
         ResultSet rows = stmt.executeQuery(select);
         return rows;
    catch(SQLException e) {
             System.out.println(e.getMessage());
        return null;
    private static void populateTable(JTable table)
        try{
    ResultSet rs = useConnAndGetData();
    while(rs.next())
public void setValueAt(object value, int row, int column)
Value: The new value to be placed in the cell
row: The row in the JTable to be changed
column: The column in the JTable to be changed
* rows and columns start at the number "0", not "1".
* Notice that the first column in a result set is column "1".
     int row = 0;
     table.setValueAt(rs.getString("title"),row,0);
     table.setValueAt(rs.getInt("year"),row,1);
     table.setValueAt(rs.getDouble("price"),row,2);
     row++;
        catch(SQLException e)
         System.out.println(e.getMessage());
        private static void createAndShowGUI() {
        //Create and set up the window.
        JFrame frame = new JFrame("OMS");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        MainOMSWindow newContentPane = new MainOMSWindow();
        newContentPane.setOpaque(true); //content panes must be opaque
        frame.setContentPane(newContentPane);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
    public static void main (String [] args){
    createAndShowGUI();
}The programe throws this :
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
        at java.util.Vector.elementAt(Vector.java:427)
        at javax.swing.table.DefaultTableColumnModel.getColumn(DefaultTableColumnModel.java:277)
        at javax.swing.JTable.convertColumnIndexToModel(JTable.java:2553)
        at javax.swing.JTable.setValueAt(JTable.java:2719)
        at desktopapplication1.MainOMSWindow.populateTable(MainOMSWindow.java:99)
        at desktopapplication1.MainOMSWindow.<init>(MainOMSWindow.java:24)
        at desktopapplication1.MainOMSWindow.createAndShowGUI(MainOMSWindow.java:119)
        at desktopapplication1.MainOMSWindow.main(MainOMSWindow.java:130)
Java Result: 1
BUILD SUCCESSFUL (total time: 1 second)

How to create this texture?

Similar Messages

Maybe you are looking for