How to create this type effect within Appearance palette?

What would be the easiest way to set a lot of type in this style?
Currently I have it all set as type (not outlined) and have the Rise Warp effect applied from the Appearance tab as well as a Drop Shadow. However, with this method I have to go in manually with the pen tool to keep it from looking like this:
I'll be needing to make a number of titles in this style and I'm looking for the quickest way to do it. Any advice? Thanks.
Edit: Bonus points for achieving this look in InDesign!

rjsakai wrote:
Edit: Bonus points for achieving this look in InDesign!
http://forums.adobe.com/message/2129576
(although it's merely a proof-of-concept -- I'd stick to using Illustrator for these sorts of manipulations).

Similar Messages

How to create this fade effect

I'm trying to create this fade effect in Dreamweaver 2004 and
would appreciate any assistance.
http://smallbusiness.smh.com.au/
It's the blue and light orange fade half-box surrounding the
"Management or Sales & Marketing or Show me information on:"
sections in the middle of the page.
Regards,
James.

Hi
can be done in Fireworks, photoshop or xara.
Simply load up the software and create a simple rectangle.
Select you fill
bucket and search for an option "gradient fill". Select the
linear option
and have a play with colours. I would suggest it's a blue to
transparent
gradient. Then you create a text layer and export the result
as a gif (as
it's a simple graphic).
Take the exported graphic and place on your page using your
chosen method.
If you need a walk through I'd suggest going to the Fireworks
forum where
you'll get all the help you want or
http://www.peachpit.com/articles/article.aspx?p=30942&seqNum=3
for
fireeworks
http://graphicssoft.about.com/od/photoshop/l/bllps507b.htm
- photoshop
HTH
Ian
[email protected]
http://www.edwards-micros.co.uk

How to create this type of cursive font?

Is this done with brushes?
What would be the best way to create this type of handwritten look?
thanks

You could use an art brush to assign ink stroke like these to a line.
Create a brush type shape that's in a straight horizontal line with the desired beginning, end and edges.
Then Brushes > New Brush > Art Brush will create an art brush. (whilst the shape is selected)
With just one brush you will be quite limited, but with a selection of brushes generated in this way you can create a selection of brushes to deal with the various requirements of building a brush font that has some integrity.
You will find that despite automating the brush process to an extent, that to create lettering like you examples, you will have to make a lot of tweaks.

3D Effect how to create this motion effect?

Hi, This is my first post.
On Brad Kremer video Hayaku: A Time Lapse Journey Through Japan,
https://vimeo.com/12112529 at :22,
What is the technique effect use at :22 (men in the street, background is moving but not the front subject)
Is-it a new 3D effect with Photoshop or Afrter effect.
What is the name of this type effect.
Could we find some tutorial on Adobe.
Thanks for whatching and respond
Pierre Fontaine

i have seen it on several tv programs, including fast n loud, but i saw a similar effect on old tv show called Home Improvement, they often did it then have the layer fall down 15:39 for example http://www.youtube.com/watch?v=4FAFPYfrVzs a lot of work though. used as a transition effect

How to create this lighting effect in Premiere Pro or After Effects?

Hey,
I'm a student and premiere beginner and I'm trying to make my first video in premiere. In this video, Drawing Channing Tatum - YouTube , you will see that lighting effects in the first 10 seconds. How can i create this?
I thank you so much!
Marie

That is stock footage of the ends of a film roll exposed to light during the loading process that is simply laid over the video with the add or screen blend mode applied. You can search for "film damage" stock footage and find something that would work from stock footage houses. You can fake your own with shape layers, blurs and opacity animations using the same add or screen blend mode. It's just much harder to get the film damage to look "real."
Here's what my google search turned up as the first link to stock footage. I have no relationship with this company and have never used their footage.
http://www.pond5.com/stock-footage/20486672/film-burn-light-transitions.html
You could also just get your smart phone close to a lightbulb, make sure it's out of focus and then move it around.

How to create this type of Form?

Hello ,
I'm new to java so I would like a hint from experts on how to create such a form :
A form that displays Customer's Codes and their name from Oracle database , so that they appear in the form as a list of 2 columns , what kind of compnents I should use to display this kind of data ? JTextField ? I dont think so .... . And also I would like to highlight each other line so that the list looks good , then at the top of the list I want a filter so that the data is filtered each time I enter a character . The last thing is how to make the data displayed have the ability to be dragged to another form in the application so that it fills the corresponding fields relative to the data dragged ?
Too much ha? . Please just provide hints/ideas about each point as I know it can be time consuming to give details about all this.
Thanks in advance...

Thank you , I tried with this code to achieve what I wanted but I get no result .
Can you please tell me whats wrong with this code ?
package desktopapplication1;
import java.sql.*;
import javax.swing.*;
import java.awt.*;
public class MainOMSWindow extends JPanel{
    public MainOMSWindow ()
        super(new GridLayout(1,0));
JTable customerListTable = new JTable();
customerListTable.setPreferredScrollableViewportSize(new Dimension(500, 70));
customerListTable.setFillsViewportHeight(true);//to make the table uses the entire height of the container
    JScrollPane pane = new JScrollPane(customerListTable);
    add(pane);
    populateTable(customerListTable);
    private static Connection getConnection()
    Connection con = null;
     try
        String driverName = "oracle.jdbc.driver.OracleDriver";
        Class.forName(driverName);   //registering JDBC Driver
        String serverName = "localhost";
        String portNumber = "1521";
        String sid = "mydb";
        //jdbc:oracle:thin:@localhost:1521:ahmaddb
        String url = "jdbc:oracle:thin:@" + serverName + ":" + portNumber + ":" + sid;
        String user = "fundinfo";
        String pw = "tadapps";
        con = DriverManager.getConnection(url, user, pw);
     catch (ClassNotFoundException e) {
                                    System.out.println(e.getMessage());
                                    System.out.println(e.getStackTrace());
                                    System.out.println(e.getCause());
                                    System.out.println(e.getException());
                                    System.exit(0);
     catch (SQLException e) {
                              System.out.println(e.getMessage());
                              System.exit(0);
    return con;
    private static ResultSet useConnAndGetData()
        Connection con = getConnection();
    try
         Statement stmt = con.createStatement();
         String select = "select title,year,price from movie order by year";
         ResultSet rows = stmt.executeQuery(select);
         return rows;
    catch(SQLException e) {
             System.out.println(e.getMessage());
        return null;
    private static void populateTable(JTable table)
        try{
    ResultSet rs = useConnAndGetData();
    while(rs.next())
public void setValueAt(object value, int row, int column)
Value: The new value to be placed in the cell
row: The row in the JTable to be changed
column: The column in the JTable to be changed
* rows and columns start at the number "0", not "1".
* Notice that the first column in a result set is column "1".
     int row = 0;
     table.setValueAt(rs.getString("title"),row,0);
     table.setValueAt(rs.getInt("year"),row,1);
     table.setValueAt(rs.getDouble("price"),row,2);
     row++;
        catch(SQLException e)
         System.out.println(e.getMessage());
        private static void createAndShowGUI() {
        //Create and set up the window.
        JFrame frame = new JFrame("OMS");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        MainOMSWindow newContentPane = new MainOMSWindow();
        newContentPane.setOpaque(true); //content panes must be opaque
        frame.setContentPane(newContentPane);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
    public static void main (String [] args){
    createAndShowGUI();
}The programe throws this :
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
        at java.util.Vector.elementAt(Vector.java:427)
        at javax.swing.table.DefaultTableColumnModel.getColumn(DefaultTableColumnModel.java:277)
        at javax.swing.JTable.convertColumnIndexToModel(JTable.java:2553)
        at javax.swing.JTable.setValueAt(JTable.java:2719)
        at desktopapplication1.MainOMSWindow.populateTable(MainOMSWindow.java:99)
        at desktopapplication1.MainOMSWindow.<init>(MainOMSWindow.java:24)
        at desktopapplication1.MainOMSWindow.createAndShowGUI(MainOMSWindow.java:119)
        at desktopapplication1.MainOMSWindow.main(MainOMSWindow.java:130)
Java Result: 1
BUILD SUCCESSFUL (total time: 1 second)

How to create this scale effect/3D?

I want to create an effect similar to what can be seen in the following video where the subject slowly scales up creating a 3D effect:
https://www.youtube.com/watch?v=4nH45OSmzY8
I'm guessing that the subject is just masked out of the photo in Photoshop and placed on a new layer, brought into Premiere and the subject layer is just scaled up? Is there anything else?
Any other tips for doing this?
Thanks.

How to parallax animate your photos
http://www.imaging-resource.com/news/2013/11/15/how-to-parallax-animate-your-photos-video
After Effects Tutorial - Parallax FX in After Effects
http://vimeo.com/61613629
Walking Dead Intro Parallax Tutorial
http://www.vidmuze.com/walking-dead-parallax-tutorial/
parallax after effects
https://www.google.com/#q=parallax+after+effects

How to create this warp effect in illustrator

Hi guys!
I have a vector that I would like to add a line of text to in another language...
At the top of the image attached with have the word "News" which is in the Rockwell font. I would like to create the same warp and change the word news to news in Swedish.
I haven't a problem with the font or creating outlines etc...just getting the exact bend shown here...
I am not sure what tools would have been used?
bookie56

bookie,
I have noticed that the Type is also sheared.
The silliest way I can come up with right away, which will allow you to use live Type so you can freely change language, is as follows, using the image as a locked background:
1) Redraw the top and bottom (curved) lines of the heading area and create a one step blend between them and expand the blend so you get a central (curved) line;
2) Write NEWS (or the Swedish equivalent) with the right size, then Object>Transform>Shear with a suitable value (10% or whatever);
3) Create a rectangle with the same length as the central line and a height that exceeds the height of the Type, then position it so the Type is suitably placed (a bit above the middle, as desired left or right);
4) Group path and Type and Object>Transform>Rotate by -90 degrees;
5) Effect>Warp>Arch using a suitable value (6% or whatever);
6) Brushes>New Brush, as an Art Brush, ticking proportional and keeping the downward direction (keep the Group);
7) Apply the Brush to the central line.
For a change of word/language, you can tick the Group and turn it into a new Art Brush after 5) and then repeat just 6) and 7).
You could also prepare the text as in 1) - 5), making the rectangle height correspond to the heading area (the distance between top and bottom lines, then Object>Expand Appearance and rotate by 90 degrees, then join the two lines into a closed path on top in the stacking order, select both and Object>EnvelopeDistort>Make with Top Object. Well, that may be even sillier.

How to create this video effect in my videos?

Hi all, new here, just got Premiere Elements 7 a week back, and must say i'm impressed...
I came across a video effect in a song found here (found from 0:53 till 1:30) where the screen goes completely white for a fraction of a second in a smooth manner and the picture returns again after that.
In fact i also want the effect of the fast forwarding of the video (audio remains the same) for a few seconds, which can also be found in the same clip in the same duration as i stated earlier... But till now i haven't been so successful at applying these...
Can you please help me out? Thanks!

For the "flash to white" you might take Paul's suggestion and invert it, i.e. placing the white matte on the Video Track (VT) above your footage, and Keyframing its Opacity. Personally, I'd look at doing this with Keyframing of Levels and cutting in a few frames of the white matte. Not sure about PE's Levels Effect (might look into some of the other "brightness" Effects too), but I'd be doing this in PrPro, which has a few more similar Effects.
One tip on the "fast-forward:" this was likely shot that way, with the camera mounted on a sturdy tripod and the a momentary switch used on the camera to do "stop motion" as the actors moved in the scene. If you do the Time Remapping, make sure to shoot on a tripod, so that the background does not change positions, only the actors to keep it looking clean. It also appeared to me that the videographer shot a few frames without the talent in the scene and these were either created in camera, or were inserted. I might have imagined this, but its use could be effective also. To keep the Audio at the exact pitch and speed, when Time Remapping, you'll want to use a soundtrack, and not rely on the Audio from the camera. You can do some work with the camera Audio to try and maintain pitch, but it can be a lot of work. Even for ambient sounds, i.e. the background sounds of the field, or forrest, I'd keep it, plus the soundtrack, separate from the Video stream.
An older Sci-Fi parody, "Ice Bandits" used a bit of stop motion freeze-framing and also under-cranking of the camera, for both Audio & Video, to create a humorous take on this Effect. If you can get a copy of that (might be on DVD?), look at the battle-scenes near the end. Heavy makeup changes were also incorporated to simulate "aging" when the action was sped up. The Time Remapped Audio contributed to the humor aspect, as the voices took on a "chipmunk-like" sound, and even the SFX were sped up too.
I don't see much real stop motion anymore in video, as much can be done in post. Back in the cine days, it was used for all sorts of effects. Jack Boseburg did a three-film trilogy, called "Trolley," that incorporated a lot of real stop-motion camera work. In his film, he controlled the camera with an intervelometer. I doubt that you could find a copy of this, however, as it was never commercially released.
Good luck,
Hunt

How to create this type of pop up?

Hi Sorry if this has been asked before I have not been using
Dreamweaver for a long time so pretty outdated with it and now I am
trying to create a photo page similar to this website
http://yumsa.ca/club/photos
I really have no idea what this behaviour is called if
someone can reference some tutorials on the web would really
appreaciate it.
Regards
Tony

It can be done. See for example
http://www.kolkinphotography.com/portfolio/default.cfm
- look at the 'about
the series' links. These were hand-made in DW using the
SetText behavior.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"fxgoddess" <[email protected]> wrote in
message
news:gjuae3$7u2$[email protected]..
> Hi--
>
> I am also interested in the light box type of effect,
but not for images.
> I
> would love to have a text link pop up like the lightbox
does, but then
> contain
> text, as well as an image.
>
> Any ideas here?
>
> Thanks!
>

How to create this type of job ?

Hi ,
I need to create a particular job that runs only betwn 7 - 10 am and for every 10th minute i.e 7:10 , 7:20 ... 9:50 etc ..
how can i do that ?
pls advise
tks & rgds

hi,
i tried submit the following job to test out but it failed :
variable j number;
begin
dbms_job.submit( :j, 'null;', sysdate , 'Chk_CSP_6am_9am_fn(sysdate)');
end;
error :
ORA-00905: missing keyword
ORA-06512: at "SYS.DBMS_JOB", line 57
ORA-06512: at "SYS.DBMS_JOB", line 129
ORA-06512: at line 2
j
my function :
create or replace function Chk_CSP_6am_9am_fn(p_date in date) return date as
i_now      date default trunc(p_date, 'HH24');
i_min      date default trunc(p_date, 'MI');
i_nextdate date;
begin
execute immediate 'select case when i_now between 13 and 14 then i_min + 10/60/24
                          else trunc(SYSDATE + 1) + 13/24
                       from dual '   into i_nextdate;
return i_nextdate;
end;what the function is doing is to check if the time is now betwn 1pm to 2pm every 10 minutes it will run else next day's 1pm
pls advise
tks & rgds

Can anyone explain how to create this effect in Deamweaver and Fireworks?

This site was oriinally done in dreamweaver - but the shadow
effect was done
outside of Dreamweaver. When I save to html and load into
Dreamweaver it
makes no sense to me.
Can anyone explain how to create this effect in Deamweaver
and Fireworks?
http://www.fundflowsystems.com/test.php
Thanks in advance,
Joe

Thank you so much...
You is da bomb!
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Yes - a blank (completely blank) page.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Ken Binney" <[email protected]>
wrote in message
> news:[email protected]...
>> Murray, one more favor if you would be so kind...
>> Do you recall how this page degraded in Safari?
>>
>>
http://www.binney.us/table-allcode.htm
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>> Nope. Sorry. You need a Mac.
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "Ken Binney"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> Thanks Murray...
>>>>
>>>> Is there a way I can test for Safari on my
PC XP ?
>>>>
>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Fails in Safari, Ken.
>>>>>
>>>>> --
>>>>> Murray --- ICQ 71997575
>>>>> Adobe Community Expert
>>>>> (If you *MUST* email me, don't LAUGH
when you do so!)
>>>>> ==================
>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>>> ==================
>>>>>
>>>>>
>>>>> "Ken Binney"
<[email protected]> wrote in message
>>>>>
news:[email protected]...
>>>>>> Here is a solution requiring NO
images.
>>>>>> The CSS and the Javascript can
easily made remote the page
>>>>>>
>>>>>> <!DOCTYPE HTML PUBLIC
"-//W3C//DTD HTML 4.01 Transitional//EN"
>>>>>> "
http://www.w3.org/TR/html4/loose.dtd">
>>>>>> <html>
>>>>>> <head>
>>>>>> <title>Shadow</title>
>>>>>> <meta http-equiv="Content-Type"
content="text/html;
>>>>>> charset=iso-8859-1">
>>>>>> <script
type="text/javascript">
>>>>>> var depth = 6 // in pixels
>>>>>>
>>>>>> // addLoadEvent t
>>>>>> function addLoadEvent(func) {
>>>>>> var oldonload = window.onload;
>>>>>> if (typeof window.onload !=
'function') {
>>>>>> window.onload = func;
>>>>>> } else {
>>>>>> window.onload = function() {
>>>>>> if (oldonload) {
>>>>>> oldonload();
>>>>>> }
>>>>>> func();
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> addLoadEvent(function() {
>>>>>>
>>>>>> var a = document.all ? document.all
>>>>>> document.getElementsByTagName('*');
>>>>>> for (var i = 0;i < a.length;i++)
>>>>>> if (a
.className == "shadow") {
>>>>>> for (x = 0;x < depth;x++) {
>>>>>> var newSd =
document.createElement("DIV")
>>>>>> newSd.className = "shadow2"
>>>>>> newSd.style.background = a.id
>>>>>> newSd.style.width = a
.offsetWidth + "px"
>>>>>> newSd.style.height =
a.offsetHeight + "px"
>>>>>> newSd.style.left = a
.offsetLeft + x + "px"
>>>>>> newSd.style.top = a.offsetTop +
x + "px"
>>>>>> document.body.appendChild(newSd)
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> );
>>>>>>
>>>>>> </script>
>>>>>> <style>
>>>>>> .shadow {
>>>>>> border: 1px solid silver;
>>>>>> padding: 2px;
>>>>>> font: 10pt arial;
>>>>>> position: relative;
>>>>>> display: inline;
>>>>>> background: white;
>>>>>> z-index: 100
>>>>>> }
>>>>>> .shadow2 {
>>>>>> overflow: hidden;
>>>>>> position: absolute;
>>>>>> filter: alpha(Opacity=15); /* modify
to change the shade
>>>>>> solidity/opacity, same as below */
>>>>>> opacity: 0.1; /* firefox 1.5 opacity
>>>>>> -moz-opacity: 0.2; /* mozilla
opacity */
>>>>>> -khtml-opacity: 0.1; /* opacity */
>>>>>> z-index: 10
>>>>>> }
>>>>>> </style>
>>>>>>
>>>>>> </head>
>>>>>>
>>>>>> <body>
>>>>>> <table width="800" border="0"
align="center" cellpadding="0"
>>>>>> cellspacing="0" class="shadow"
id="#000000">
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> </table>
>>>>>> </body>
>>>>>> </html>
>>>>>>
>>>>>>
>>>>>>
>>>>>> "Joe"
<[email protected]> wrote in message
>>>>>>
news:[email protected]...
>>>>>>>
>>>>>>> This site was oriinally done in
dreamweaver - but the shadow effect
>>>>>>> was done outside of Dreamweaver.
When I save to html and load into
>>>>>>> Dreamweaver it makes no sense to
me.
>>>>>>>
>>>>>>> Can anyone explain how to create
this effect in Deamweaver and
>>>>>>> Fireworks?
>>>>>>>
>>>>>>>
http://www.fundflowsystems.com/test.php
>>>>>>>
>>>>>>> Thanks in advance,
>>>>>>>
>>>>>>> Joe
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

How to add this type of effect in photoshop plugin

How to add this type of effect in photoshop by plugin

Well, if that's the best you can do in describing what you consider an "effect" in this image, it will take a mind reader or clairvoyant to figure it out.
All I see is a guy that looks a lot like the infamous sex-slave-and-women-trafficker Saban Baran, possibly wearing a rug on his usually bald shaven head.
http://tinyurl.com/jw5lmzy
If it's someone else and that is real hair, then someone may have selected the hair in Photoshop and applied a tiny bit of the Oil Filter on it. The Oil Filter has been removed from the newest versions of Photoshop.

How to create a Lamella effect in PSE7 ?

I'd like to create as a special effect a light and shadow lamella effect (as it can be seen when the light is coming through partially closed lamella curtains). Does someone knows how to create this effect with PSE7?
Thanks for your help.
Roland

I worked on this challenge a bit and came up with the following:
Open picture file
Duplicate background layer, work on background copy layer, shut off visibility of background layer by clicking on its eye icon. I do this so that if you want to start over again, you can just delete the newly generated layers.
Create a new, blank layer at the top of the stack, fill this with 50% gray (Edit>fill layer>50% gray), Mode:overlay
Go to Filter>sketch>Halftone pattern. Adjust size & contrast. Pattern type:line
Soften this a bit with Filter>noise>median - set radius to suit
Still working on layer at top of stack with 50% gray, apply eraser tool to remove unwanted striping.
Go to Image>transform>skew to achieve desired curvature of stripes
Reduce opacity of this layer to suit.
An alternative may be to take a picture of a venetian blind with light behind it, define this as a pattern (Edit>define pattern), then apply this pattern in a layer. I can't try this since we don't have venetian blinds.
HTH

How to create a new folder within the video folder in media

Hi, I'm trying to figure out how to create a new folder within the video folder in media. I can easily create new folders within the pictures folder but not in videos.....Why??? Thanks in advance for your help.
Message Edited by dany_s on 06-25-2009 03:58 PM
Solved!
Go to Solution.

Hello,
I think you can try two things : the soft reboot, and if it does not work, the hard reboot. Don't worry, you can't lose data with these two reboots.
Soft reboot :
1) Hit the three following keys at the same time :
- Alt
- Right Shift
- Delete
2) wait 2 minutes for the Blackberry to wake up.
Hard reboot :
1) your Blackberry device is on
2) remove the battery and wait for a minute
3) Put the battery back
4) wait 5 minutes for the device to wake up.
Please tell us if it works for you.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

How to create this type effect within Appearance palette?

Similar Messages

Maybe you are looking for