How to create transparency between objects

Hi, I'm hoping you cam assist with something that is troubling me.
I have a circle with split into 5 segments (image A).
All of the segments have a stroke (1px) of white, and a fill.
What I want is for the STROKE to be transparent so that when I position the 5 segments over a different background colour (image B) I see the colour underneath where the white stroke would otherwise appear. To recap - I would like to retain the width of the stroke, and make the stroke coloue transparent..
I've tried the Opacity setting, but this applies to the object, not just the stroke.
Your help would be gratefully received.
Thanks. I'm on CS5

Ah, I see how you drew it.
I would make a copy of your design. Remove the stroke. Draw a straight line the size of the gap you want. You'll loose the color difference (the blue) but I would make a compund path of the shutters. Position a copy of the line over a joint. Use the pathfinder to slice a piece between two of the shutters. Make another line copy, position, rinse and repeat.
While my copy of your design began as a trace, you are welcome to it if it helps.
http://www.wenzloffandsons.com/temp/shutter.ai
Take care, Mike

Similar Messages

  • How to create deltalinks between object in Generic Creator

    Hi
    Portal Version = NW 04 Stack 16
    I have had an look to the How to guide for "How to automate content
    creation via XML" https://websmp102.sap-ag.de/~form/sapnet?
    SHORTKEY=00200797470000073623&OBJECT=011000358700003443012004E
    I am looking for an issue where I create four folders (iviews, pages,
    roles, worksets) with objects and sametime create deltalinks between
    theese objects.
    I am currently able to create a role with worksets and pages, but then
    I am not able to see the objects in the PCD structure other than the
    role.
    Any idea where to find information about this and better how to perform
    such an issue.
    Regards
    Kay-Arne S. Aarlie

    Hi,
    The Portal Catalog -- the pane you see on the left when you are in Content Administration -- you only see the role and not the pages and iViews inside. You have to open the role for editing to see what's inside.
    You can also use the PCD inspector if you want to browse through the objects in a role.
    You create delta links with the generic creator simply by specifying a PCD address in the template attribute of the <Context> element.
    Hope this helps.
    Daniel

  • How to create a view object and attach with extended AM

    Hi,
    I tried to create new vo and attach this vo with the extended AM. But it is throwing error like 'PC.NAME : invalid identifier' (Actually this PC.NAME is exiting one).
    Now i want to know how to create a view object similar like seeded one but with one additional condition in the where clause.
    It is possible though extension, but i want to create two view object similar like seeded one, one with some other condition in the where clause
    and another one with some other condition.
    So for my requirement, i'll extend one VO and i'll add my condition but how to do it for second condition.
    But i want same seeded VO with two different condition.
    Any suggestions please,
    SAN

    SAN,
    There is no need to attach the newly created VO with extended AM. You need to attach the same with the standard AM.
    Regards,
    Gyan

  • How to create transparent image at run-time?

    How to create transparent image at run-time? I mean I want to create a (new) transparent image1, then show other (loaded) transparent image2 to image1, then show image1 to a DC. The problem is - image1 has non-transparent background...

    i'm not sure, but you can set the alpha value to 0 in all pixels which are 'in' the background..
    greetz
    chris

  • ADF Faces: RichTable - How to create a RichTable object

    Hi. How to create a RichTable object to put in a JSF page ? I need to make a method that receive a list of name of columns and a list of list of data. This code that I have writing don't work. What's my error?
            public RichTable getADFTable(
            List<String> lstCols, List< List<String> > lstLstData
            RichColumn adfCol = null;
            List<RichColumn> lstRichCols = new ArrayList<RichColumn>();
            int cont = 0;
            for( String col : lstCols ){
                adfCol = new RichColumn();
                adfCol.setDisplayIndex(cont++);
                adfCol.setHeaderText( col );
                adfCol.setMinimumWidth( "60" );
                lstRichCols.add( adfCol );
            int contCols = 0;
            RichOutputText text = null;
            RichTable AdfTab = new RichTable();
            for( List<String> lstData : lstLstData){
                for( String data : lstData ){
                    text = new RichOutputText();
                    text.setValue(data);
                    lstRichCols.get( contCols ).getChildren().add( text );
                    contCols++;
                contCols = 0;
            AdfTab.setRows(this.lstEntit.size());
            cont = 0;
            for( RichColumn col : lstRichCols ){
                AdfTab.getChildren().add( col );
            return AdfTab;
        }

    I was searching for an example and i found it but whit errors, finally i fixed and it works.
    You just have to generate the data from your webservices and "put" into this structure.
    The java file (Bean)
    package view;
    import java.util.ArrayList;
    import java.util.HashMap;
    import java.util.List;
    import java.util.Map;
    import org.apache.myfaces.trinidad.model.CollectionModel;
    import org.apache.myfaces.trinidad.model.SortableModel;
    public class DynamicTable {
        private SortableModel model;
        private List<String> columnNames;
        public DynamicTable() {
            columnNames = new ArrayList<String>();
            columnNames.add("Col-1");
            columnNames.add("Col-2");
            generateColumnModel();
        public void generateColumnModel() {
            this.model = new SortableModel(createRows(columnNames));
        private List<Map> createRows(List<String> columnNames) {
            int i = 0;
            List<Map> mapListforRows = new ArrayList<Map>();
            for (String name : columnNames) {
                Map newRow = new HashMap();
                mapListforRows.add(newRow);
                for (String col : columnNames) {
                    newRow.put(col, "data");
            return mapListforRows;
        // Get table model
        public CollectionModel getCollectionModel() {
            return model;
        public void setColumnNames(List<String> columnNames) {
            this.columnNames = columnNames;
        public List<String> getColumnNames() {
            return columnNames;
    }The jspx file (page)
               <af:table varStatus="rowStat" summary="table"
                            value="#{pageFlowScope.DynamicTable.collectionModel}"
                            rows="#{pageFlowScope.DynamicTable.collectionModel.rowCount}"
                            rowSelection="none" contentDelivery="immediate"
                            var="row" rendered="true" id="t1">
                    <af:forEach items="#{pageFlowScope.DynamicTable.columnNames}"
                                var="name">
                      <af:column sortable="true" sortProperty="#{name}"
                                 rowHeader="unstyled" headerText="#{name}"
                                 inlineStyle="width:100px;" id="c1">
                        <af:activeOutputText value="#{row[name]}" id="aot1"/>
                      </af:column>
                    </af:forEach>
                  </af:table>

  • How to create a georaster object?

    Hi,
    I type this codes to create a georaster object. but there is error msg.
    SDO_GEOR.createBlank(
    rasterType IN INTEGER,
    ultCoord IN SDO_NUMBER_ARRAY,
    dimSizes IN SDO_NUMBER_ARRAY,
    cellValue IN NUMBER,
    rasterDataTable IN VARCHAR2 DEFAULT NULL,
    rasterID IN NUMBER DEFAULT NULL
    ) RETURN SDO_GEORASTER;
    Error Message:
    Error starting at line 1 in command:
    SDO_GEOR.createBlank(
    Error report:
    Unknown Command
    Error starting at line 3 in command:
    rasterType IN INTEGER,
    Error report:
    Unknown Command
    Error starting at line 5 in command:
    ultCoord IN SDO_NUMBER_ARRAY,
    Error report:
    Unknown Command
    Error starting at line 7 in command:
    dimSizes IN SDO_NUMBER_ARRAY,
    Error report:
    Unknown Command
    Error starting at line 9 in command:
    cellValue IN NUMBER,
    Error report:
    Unknown Command
    Error starting at line 11 in command:
    rasterDataTable IN VARCHAR2 DEFAULT NULL,
    Error report:
    Unknown Command
    Error starting at line 13 in command:
    rasterID IN NUMBER DEFAULT NULL
    Error report:
    Unknown Command
    Error starting at line 15 in command:
    ) RETURN SDO_GEORASTER;
    Error report:
    Unknown Command
    Please advise me on how to create a georaster object as i am very new to the technology.
    Thanks and regards,
    Esther

    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14254/geor_intro.htm

  • How to create authority check object and assign to  ztcode which is of modu

    Dear ,
             how to create authority check object and assign to  ztcode which is of custom module pool program.its urgent kindly help points rewarded.

    Manoj,
    You can check with your Basis team to create authorisation object and assigining tcodes to the user profiles.
    K.Kiran.

  • How to create new authorisation object for Transactions?

    Hi,
    How to create new authorisaton object and how to assign that object on a transaction code?
    Case ->
    The transaction code VL01N have the object called V_LIKP_VST under Class "LE_V" that have two auth. fields. one is 'Activity' and other one is "Shipping Point/Receiving Point".
    Here I want to add "Storage location" also. I have created one object called "Z_LIKP_VST" under same calass "LE_V". and added "Activity", "Shipping Poing/Receiving Poing" and "Storage Location". After that I added that object ("Z_LIKP_VST") for particular transaction through "SU24". I maintained the "Display check indicator" for VL01N.
    I created one new role and assigend the particular transacation for a user. but still SAP taking  V_LIKP_VST insted of Z_LIKP_VST.
    How can I change my Z_LIKP_VST on profile.
    Please help
    Thanks in Advance
    Lal

    Hi Kariyath,
    I suppose its not about interest but a MUST.. sorry but.. unless u include the Logic in the program how can SAP pick these custom Z objects ?
    after u create them and assign to a Tcode in SU24 there is no logic to check these objects. Frankly i see no other chance.... unless SAP comes to us with a great easy way to input these Custom objects
    Keep looking and please Update me if u have any Inputs....on this front..
    All the Best
    Br,
    Sri
    Award points for helpful answers

  • Plz tell me how to create authority check objects and how to usein prg

    dear sir,
    plz tell me how to create authority check objects and how to usein prg

    http://help.sap.com/saphelp_46c/helpdata/en/5c/deaa74d3d411d3970a0000e82de14a/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/52/6716a6439b11d1896f0000e8322d00/content.ht
    Create custom authorization – Customer specific object
    If you have requirements that cannot be met using the P_ORGIN and P_ORGXX authorization objects (for example, because you want to build your authorization checks on additional fields of the Organizational Assignment infotype (0001) that are customer-specific), you can include an authorization object in the authorization checks yourself.
    Create the authorization object using transaction SU21. Make sure you keep to the customer name range (Z/Y). To be able to use the new authorization object you have created in the master data authorization check, the object must contain the INFTY, SUBTY, and AUTHC fields. You can use any of the fields of the Organizational Assignment infotype (0001) for the other fields. You can also use customer-specific additional fields provided they are CHAR or NUMC type fields.
    After you have created the object, you must start the RPUACG00 report. This report overwrites the MPPAUTZZ standard include with the code that is needed to evaluate the authorization object you created. Note: Technically speaking, this involves a modification. However, SAP fully supports this procedure. And you should not have more maintenance work as a result of this modification.
              Note: that if you use customer-specific authorization objects, you must maintain these objects in transaction SU24 (Maintain Assignment of Authorization Objects to Transactions) in the same way as you maintain the authorization objects P_ORGIN, P_ORGXX, and P_PERNR
    AUTHORITY CHECK OBJECT Object_name
                ID fieldname1 FIELD fieldvalue1
                ID fieldname2 FIELD fieldvalue2
                ID fieldname3 FIELD fieldvalue3.
                 If sy-subrc eq 0.   "Authorization exists
                 Endif.
    http://articles.techrepublic.com.com/5100-6329_11-5110893.html
    Edited by: JackandJay on Jan 16, 2008 10:21 AM

  • How to create Authority check object

    Hello Gurus,
    How to create Authority-check object 'ZABC'
                                                             ID 'TABLE' FIELD 'ZTABLE'.
    Please tell me detailed procedure.
    Thanks in advance.
    Best Regards,
    zubera

    Dear Zubera,
    Creating Authorization Fields
    In authorization objects, authorization fields represent the values to be tested during authorization checks.
    To create authorization fields, choose Tools --> ABAP Workbench --> Development --> Other tools --> Authorization objects ® Fields.
    To create a authorization field:
    1. Choose Create authorization field.
    2. On the next screen, enter the name of the field. Field names    must be unique and must begin with the letter Y or Z.
    3. Assign a data element from the ABAP Dictionary to the field.
    4. If desired, enter a check table for the possible entries. For    more information about check tables.
    For more information about AUTHORITY-CHECK, see the keyword documentation of the ABAP Editor.
    You can often use the fields defined by SAP in your own authorization objects. If you create a new authorization object, you do not need to define your own fields. For example, you can use the SAP field ACTVT in your own authorization objects to represent a wide variety of actions in the system.
    Assigning an Authorization Object to an Object Class
    Each authorization object must be assigned to an object class when it is created.
    Choose Tools --> ABAP Workbench --> Development --> Other tools --> Authorization objects --> Objects.
    You can also create authorization objects in the Object Navigator (SE80).
    Creating / Choosing Object Classes
    The system displays a list of existing object classes.
    Object classes are organized according to the components of the system.
    Before you can create a new object, you must define the object class for the component in which you are working. The objects are not overwritten when you install new releases.
    You can also define your own object classes. If you do so, select class names that begin with Y or Z to avoid conflicts with SAP names.
    Creating an Object
    Enter a unique object name and the fields that belong to the object. Object names must begin with the letter Y or Z in accordance with the naming convention for customer-specific objects.
    You can enter up to ten authorization fields in an object definition. You must also enter a description of the object and create documentation for it.
    Ensure that the object definition matches the AUTHORITY-CHECK calls that refer to the object.
    Do not change or delete authorization objects defined by SAP. This disables SAP programs that use the objects.
    You can regenerate the profile SAP_ALL after creating an authorization object.
    Best Regards,
    Rajesh
    Please reward points if found helpful.

  • How to create a Business Object

    Hi All,
    How to create a Business Object.
    If any material is avaliable Please mail me to [email protected]
    Thank you,
    Ramu N.

    Hi,
    Check this SAP help link,
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4f/5668735cf211d194a30000e82dec10/frameset.htm
    Thanks and Regards,
    Bharat Kumar Reddy.V

  • How to create agreement between supplier and distributor?

    Hi..
    How to create agreement between supplier and distributor?
    thanks & Regards
    Harish

    Hi,
    call TA EEDMIDESERVPROV02. Type in your service provider, an go to tab 'agreements'. Here you have the button 'Create Agreement'.
    Best regards,
    Alexander

  • How to create Trust between two domain

    How to create Trust between two domain:
    please help

    Hi,
    By default, two-way, transitive trusts are automatically created when a new domain is added to a domain tree or forest root domain using the Active Directory Installation
    Wizard. The two default trust types are defined in the following table. However there have others many types of the AD trust, please refer the following KB to determine which type you need:
    Trust types
    http://technet.microsoft.com/en-us/library/cc775736%28v=ws.10%29.aspx
    More relate KB:
    Creating Domain and Forest Trusts
    http://technet.microsoft.com/en-us/library/cc740018(WS.10).aspx
    The related third party article:
    How to configure Forest Level Trust in Windows Server
    http://blogs.interfacett.com/how-to-configure-forest-level-trust-in-windows-server
    *** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control
    these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the
    use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to create transparency gradient

    Hi
    please share how to create transparency gradient
    have attached the example

    qanibh,
    In the newest version(s), you may specify opacity values for the Gradient Fill.
    In older versions,, you may:
    1) Create the shape with the solid end colour upon the seethrough background;
    2) Copy to the front, apply a gradient to the copy, and in the Transparency palette/panel flyout Make Opacity Mask, setting Clip and Invert as wished.

  • How to create space between Header text of Hierarchical ALV List.

    hi,
    I am display data using Hierarchical ALV List.
    In Perform of field catalog, I am writing this code:
    PERFORM fill_catalogue USING :
         'CHKBX'      'T_HEADER' 20  'Sess Decision Box'(t19) 'X',
          'SESS_NO'    'T_HEADER' 11  'Session'(t20)           ' ' ,
          'SESS_STAT'  'T_HEADER'  4  'Status'(t39)            ' ',
          'HOLD_STAT'  'T_HEADER'  4  'HOLD'(t52)              ' ',
          'ICON'       'T_HEADER'  9  'Tracking'(t21)          ' ' ,
          'CREATE_DT'  'T_HEADER' 10  'Archiving Date'(t22)    ' '  ,
          'AGING'      'T_HEADER' 50  'Aging'(t23)             ' ',
          'OBJECT'     'T_HEADER' 12  'Archive Obj'(t24)       ' ',
          'HOLD_INFO'  'T_HEADER' 100 'Hold Reason'            ' ' ,
          'YFY_DATA'   'T_HEADER' 4  'Data Fiscal Year'(t48)  ' ' ,
          'COMMENTS'   'T_HEADER' 50  'Session Notes'(t26)     ' ' ,
          'DATATYPE'   'T_HEADER' 50  'Archive Object Description'(t25) ' ',
          'APPR_STAT'    'T_ITEM' 16  'Approval Status'(t29)   ' ',
          'DESTR_DT_REV' 'T_ITEM' 10  'New Date'(t30)          ' ',
          'REJCT_REASON' 'T_ITEM' 60  'Rejection Reason'(t31)  ' '  .
    At output of this program , there are two rows in HEADER details.
    I want text 'Session notes' of 2nd row  under 'Archiving Date' of 1st row.
    For this i have to create space between 'Data Fiscal Year' & 'Session notes' text.
    How i can do this.
    Regards,
    Mamta

    Hi,
    You can use TOP-OF-PAGE event and pass this event to Hierarchical ALV FM.
    Thanks,
    Kartavya Kaushik.

Maybe you are looking for