How to create transport request for standard text created using SO10.

Hi,
How to create transport request for standard text created using SO10?
Regards
Ramakrishna L

Hi,
For the Standard text created in SO10,
please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
Double click on ADRS or ST or what ever your type of text->
Enter your standard text name
Click on transport button->SHIFT+f6-> It will ask you for a transport request.
Best regards,
Siva

Similar Messages

  • How to create transport request for standard web template

    hi all
    can any one tell me the step by step procedure to create transport request for standard template?
    thanks
    shalini

    Business Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
    Message was edited by:
            Jerome

  • Doubt in creating the transport request for "STANDARD TEXT""

    HI ALL,
    i used the standard text in scripts but i am getting the problem while creating the transport request for that,
    i am not able to create the transport request for that,if anybody knows plzlet me know,
    this is very urgent,
    thanks and regards,
    saikrishna.

    HI SURESH ,
    THANKS FOR UR IMMEDIATE REPLY ,
    i executed that report in that i have given
    Name of Correction : ZREPST
    Textkey-object:
    Text key name:
    Text key - ID: ST
    Text key - language :EN
    Here Textkey-object,Text key name
    wat i have to ,give after that ,can i execute that ,
    will it create the request.
    plz let me know,now ur answer is very valueble ,because ,now i have to release everything,
    plz let me know immediately,
    thanks and regards,
    saikrishna.

  • Creating transport request for SQVI

    Hi ABAP Guru's,
    I have created a query using SQVI. How can I create transport request for it because I want to transport that to QA.
    Thanks.
    Regards,
    Tushar.

    Hi Tushar,
    You cannot transport The query made via  SQVI is only intended for individual use/reporting purpose.
    To transport the query by converting it to SAP Query  source of data tobe converted to an Infoset.
    SQVI-> SAP QUERY
    QUERY(MENU) -> CONVERT QUICKVIEWS
    Assign Infoset and Area to the Query and then you can transport.
    Hope this may help you.
    Regards,
    Lanka

  • How to get F4 help for Standard Text Key of a operation based on Order type

    Hi Experts,
      How to get F4 help for Standard Text Key (STK) of a operation based on Order type entered in selection screen. The F4 help should give the STK of related order type. At the same time the F4 help for Task Types based on Notification type. How to acheive the above two. Please provide the table names or any search help name if exists or Function modules...
    Thanks in Advance.
    Regads,
    Bujji

    Hi Guys,
       Any help on this...
    Regards,
    Bujji
    Edited by: Bujji on Dec 22, 2008 12:42 PM
    Edited by: Bujji on Jan 5, 2009 2:00 PM

  • How to Create Transport Request For custom table

    Hello All,
    I have and requirement to create transport request automatically when and record inserted in to the custom table.
    Actually FI whe people create or delete  some bank account from DEV client the transport request  creates automatically and they transport that request to Quality and Production system to delete or create that account from all the systems.  but when they delete the account all the informations related to that bank accounts get deleted from all the standered customize tables .  to keep the track of that deleted account I have created one z table which is of type customize table. this table is filled automatically when any account get deleted from DEV system. now I want to pass that record to Quality and Production systems using transport request.
    how can i create transport request when record get inserted into my ztable automatically.
    Thanks in advance.
    Vinod

    Hello All,
    This is a FAQ and has been answered many times before in the forum.
    1. Maintain delivery class 'C' it will start asking for a TR: False. Delivery class has got nothing to do with the TR prompt. It determines how the data is to be transported. A delivery class 'C' will prompt for a customizing request, whereas a delivery 'A' will prompt for a workbench request.
    2. For the system to automatically prompt for a TR you have to select the "Standard Recording Routine" in the table maintenance generator. This will prompt you for a TR every time you try to create / modify a record & save it to the DB.
    Hope i am clear in my explanation.
    If your table is filled automatically through some coding you have to add the entry to the TR programmatically. Check this link for details: [http://wiki.sdn.sap.com/wiki/display/ABAP/TransportingTableEntriesinABAPprogrammatically|http://wiki.sdn.sap.com/wiki/display/ABAP/TransportingTableEntriesinABAPprogrammatically]
    BR,
    Suhas
    Edited by: Suhas Saha on Mar 31, 2010 11:22 AM

  • How to create Transport request for OKC9

    Hi Experts,
    I changed the Prerequisite for one of the substitution in Development client.
    No I need to move the same to Production client, but after make changes in prerequisite am not generating the Transport request.  Please help me out how to create the Transport Request for the same.
    Regards
    Vijay

    Check whether t he Request is being generated or not 
    if yes
    go to SE10
    display the tranport request
    Release the Cusotmising Task  first
    later relase the Request
    and later Check whetehr the Request is passed in Qiality form Development thru t code STMS
    Check with ur basis consultant once

  • How to create Transport request for OKC9 changes

    Hi Experts,
    I changed the Prerequisite for one of the substitution in Development client.
    No I need to move the same to Production client, but after make changes in prerequisite am not generating the Transport request. Please help me out how to create the Transport Request for the same.
    Regards
    Vijay

    HI,
    In the same screen, go to Menu bar>Table view. Transport.
    This will help you to create Transport request and u can move the same to Production.
    Vijay

  • I want to upload om data through lsmw. how can i create transport request for lsmw data.

    can anyone help me?

    Hi Anand,
    There are 2 ways for transporting LSMW data from a system to another.
    1) Export/import this method gives you the opportunity to select the subprojects or objects you want to transfer. Hence you don't transfer the object a colleague might have created and that should stay in development system. LSMW -> Extras -> Export project  
    2)Transport request with this method, you can transport a LSMW project in full (you cannot select the objects you want). With this method, the project will be transported as any other SAP object in a transport order. 
    LSMW -> Extras -> Create change request 
    For more information, refer below link Steps to copy LSMW from one client to another
    Thanks
    KH

  • How to assign transport request for Dynamic selection in SE36

    Hi Friends,
    Please guide me how to transport or assign a request for the changes made in BRF selecion view.
    I have assigned and added BKPF-XREF1_HD field for FB03 transaction. Its working fine as per user requirement.
    I am facing probelm to assing a transport request for that. I didn't find any transport menu in se36.
    So please provide me how to assign a TR which need to import into Production client.
    If I have to assign or create a program (standard), then please provide me the program name.
    Please reply.
    Thanks & Regards
    Sankar.
    Edited by: sankar babu on Jul 29, 2010 12:27 PM

    Moderator message - Cross post locked
    Total Questions:  283 (131 unresolved)
    Please also close your old posts and assign po1nts to helpful answers.
    Rob
    Edited by: Rob Burbank on Jul 29, 2010 9:50 AM

  • How to Delete Transport request for Delete client

    Hi guys,
    We are going for upgrade from 46C to ECC.
    we found client XXX does not exists but Transport request for the client XXX does exists. so we plan to delete it or release it before going to upgrade.
    But SAP does not allow me to delete or release it. Is there any special way to deal this issue.
    Please suggest me.
    Thanks
    Jaichan

    You could have the lost client XXX recreated again by system administrator using a "minimal" client copy (just users), should take only minutes and not much disk space.
    Then you can release or delete the transports, afterwards delete the client again.
    I don't know another way of doing it.
    Thomas
    P.S. all the other replies so far do not take into account that you cannot change transports that were created in a different client.
    P.P.S did you ever look at the long text for message TK056? This clearly explains your options here
    To transfer the request to the current client, proceed as follows:
    1. Go to the request overview.
    2. Position the cursor on the request and choose Request/task -> Display/change.
    You are asked if you want to copy the request and all tasks belonging to it to the current client.
    3. Answer "Yes".
    The request is copied to the current client, and can then be edited as normal.
    Note
    For this procedure, you require the "Change source client" authorization contained in the SAP standard authorization S_CTS_TR_ALL.
    You can copy only your own requests to another client.
    In order to copy other users' requests, you first have to assign them to you.
    You can reassign the request to you in another client only if the original client no longer exists (prerequisite: You want all client-specific entries to be deleted).
    I was not aware of this up to right now...

  • Transport req for standard text.

    Hi All
    How to find out the Under which request number standard text elements are stored in the smartforms.
    Thanks

    Hi,
    As Vijay said the way you attach the standard text to tr. request is different through the program RSTXTRAN. If you want to find out under which tr. request the text is attached, go to SE09 which will display the tr. requests pertaining to a user and you can look under the tr. request.
    Regards,
    Ravi

  • How to create transport request for business function activation?

    Hi Gurús,
    I activated LOG_MM_MAA_1 business function in development (DEV) system:
    Component: SAP_APPL
    Release: 604
    Level: 0006
    SP: SAPKH60406
    I want to transport the activation to quality (QAS) system.
    In SFW5 transaction --> System Settings --> Transport only generated a workbench transport request with "Status Tables Switch Framework Client-Independent" (Object type = SF02, Object = A)
    Is this the only object to transport?
    Is the activation of business function should be direct in QAS system?
    Thank in advance
    Alonso Valenzuela

    > In SFW5 transaction --> System Settings --> Transport only generated a workbench transport request with "Status Tables Switch Framework Client-Independent" (Object type = SF02, Object = A)
    > Is this the only object to transport?
    Yes.
    The "after import" method during the transport will activate the BF as it did in the original system.
    > Is the activation of business function should be direct in QAS system?
    No, transport it.
    Markus

  • Transposrt request for standard text

    Hi,
    I have made changes to a standard text in SO10. It didnt ask for any transport request. IN se10 i created a workbench request. But the task is for this request is unclassified. How would i change it to Development/correction.
    Please let me know.
    Ster

    Hi,
    Steps..
    Create a work bench CR in the transaction SE09..
    Modify the task to Development correction / Repair..
    Go to the program RSTXTRAN..
    In the name of correction give the task number (Not the CR number)
    Give the Text Key..Your standard text name..
    Press F8...
    Press select all..
    Then Press enter..
    Then press the button "Trsfr texts to corr".
    Now the standard texts will be moved to a CR..
    Then release the CR and move it to QA..
    If you want to move it to another client..
    Use the transaction SCC1.
    Thanks,
    Naren

  • Error in creating Transport Request for a view table

    Hello all,
    I have an ECC IDES 6.0 system named EC1 and another one which is ECC EhP4 IDES named EA1 which I have just installed.
    One of my requesters has a view table named ZVAITM_TBLE in EC1 and she wants it to be transported to EA1.
    So I created a workbench transport in SE10 and included the following:
    PgmID = R3TR
    Obj = VDAT
    Object name = ZVAITM_TBLE
    But when I press enter, I encountered the following error:
    No object definition exists for Customizing object ZVAITM_TBLE
    Message no. TK427
    Diagnosis
    The Customizing object R3TR VDAT ZVAITM_TBLE is not defined in the tables of the Change and Transport System.
    This means that you cannot use the Transport Organizer to edit it.
    System Response
    The function terminates.
    Procedure
    First check whether the name of the object is correct. Then you (or the system administrator) should check the object definition, to ensure that the object was created correctly (transaction SOBJ).
    If the object does not exist, then create it or delete it from the request/task.
    I am new to transports so I have no idea how to proceed.
    Please advise.
    Thanks a lot!
    Cha Cha

    Hello Cha,
    Kindly open this custom table using SM30 and try creating a transport request from there.
    Regards
    Vivek

Maybe you are looking for

  • Opening qries (BEX7.0) through web browser

    Dear Experts I have created a query using Query Designer (BEX 7.0) and now I want to open or execute it in WEB Browser . Pl. mention all the steps............ Thanks in advance Dinesh Sharma

  • Can't play music from Universal Dock when iPod classic plugged in

    According to the iPod classic manual, one can play music or video while the iPod is connected to the computer or AC power to be charged up. However, this is not working for me. Instead, it says "Connected", and won't actually let me play music unless

  • Simple example of a combobox displaying data from a CF datasource

    Can anyone point me to a simple example of a Flex 3 combobox that displays data from a ColdFusion datasource?  I cannot seem to find a simple example.  As always, thanks!

  • BDC  for AB08

    Dear Experts, I am making a program which involves making a reversal of asset document using the T-CODE AB08. I am trying to make a recording to build a BDC table for transaction AB08 to use in the program. In the transaction I am using the dynamic s

  • Where is the paint bucket icon on PS cc

    where is the paint bucket icon on PS cc