How to Create Transport ?
Hi Guys, I am trying to create transport request and have come across a doubt, while collecting the objects for transport. If i click on "Object type" in "Transport Connection" and choose Infocube as the Object to be collected and create a transport request, will all the InfoObjects belong to this InfoCube also get transported along with this request, or do i need to collect those InfoObjects in a separate transport request?
Your help will be appriciated in terms of points...
Thanks,
Man
Hi:
Most of the time, IF nobody has the InfoObjects in their requests, all the Objects will come into your request.
You will have a chance to see for yourself. If they are not there, then you can do the steps below -
If you want to collect all related Objects for the Cube, then, in the menu, there is a button called: Grouping.
There select the one called "In Data FLow Before".
ALso, is a good idea to move these before you collect Cubes, ec.
Application Components
InfoAreas
Then, start with the remaining stuff.
Look up some Posts on guidence, there is lot of help on SDN.
Re: transport strategy
One more note, eventhough if you move Cube, it will transport the rest of the dependent Objects, I don't personally follow it. Some people do.
I move in this Order.
R/3 transports.
Replicate R/3 Data Sources
BW -
InfoAreas
Application Components
(when you move the above, don;t move any other Objects with them)
InfoObject Catalog with InfoObjects
Cubes
InfoSOurces
Update Rules
Queries, Web templates, etc.
Generate Export Data Sources
Replicate Data Sources
Objects that depend on Replicard Objects in BW.
Its mostly based on experience.
Chamarthy
Message was edited by:
U.P. Chamarthy
Similar Messages
-
How to create transport request in object transport
How to create transport request in object transport from server to server
thanks in advance
aryahi,
when ever u r creating any object in devlopment and saving it will ask for request.create request and release in se09.
put mail to basis people to transport ,thy will transport using STMS transaction. -
How to create transport request for standard text created using SO10.
Hi,
How to create transport request for standard text created using SO10?
Regards
Ramakrishna LHi,
For the Standard text created in SO10,
please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
Double click on ADRS or ST or what ever your type of text->
Enter your standard text name
Click on transport button->SHIFT+f6-> It will ask you for a transport request.
Best regards,
Siva -
How To Create Transport Proposal?
Hi,
Can anybody explain me how to create transport proposal?this is urgent.plz respond
Regards
Sap Guruhi Guru,
do you mean transport request? Than go to tcode SE01 and click create, choose customizing request (or workbench, if you want to transport abap programs, tables, etc.), enter some name and you have a transport reuqest.
hope this helps
ec -
How to create transport request of Dynamic Selection view.
Dear Freinds,
I have created a dynamic selections view form Se80 > Editobject>Selection view > Created by adding the required tables pa0002,pa006,pa0009 . But the transport request saved it locally now i want to create a transport request for the dynamic view . Could any please let me know how to create transport request for the Dynamic selection View which has been created or could any please let me know where this dynamic selection gets stored?
regards
divyaHi Kalyan,
In se80> editobjects > selection view .........i have created the selection view . Now i have went into se80 and i dont find the one you have told me . could you please let me know little bit clear where i have to see .
regards
divya. -
How to create Transport request in R/3(ECC6)
Hi all,
Can somebody tell me how to create the transport request in ECC6.0
Regards
Kiran KumarKiran,
From RSA5 --> Choose datasource and select "Activate Datasource" --> system prompts for transport request. Do not save as local object. assign package and assign to transport request.
From RSA6 --> Select datasouce --> choose transport(truck icon) --> follow same as above
From LBWE --> if you do any changes or customization system prompt for transport request.
Hope it Helps
Srini -
How to create Transport request for OKC9
Hi Experts,
I changed the Prerequisite for one of the substitution in Development client.
No I need to move the same to Production client, but after make changes in prerequisite am not generating the Transport request. Please help me out how to create the Transport Request for the same.
Regards
VijayCheck whether t he Request is being generated or not
if yes
go to SE10
display the tranport request
Release the Cusotmising Task first
later relase the Request
and later Check whetehr the Request is passed in Qiality form Development thru t code STMS
Check with ur basis consultant once -
How to create Transport request for OKC9 changes
Hi Experts,
I changed the Prerequisite for one of the substitution in Development client.
No I need to move the same to Production client, but after make changes in prerequisite am not generating the Transport request. Please help me out how to create the Transport Request for the same.
Regards
VijayHI,
In the same screen, go to Menu bar>Table view. Transport.
This will help you to create Transport request and u can move the same to Production.
Vijay -
How to Create Transport Request For custom table
Hello All,
I have and requirement to create transport request automatically when and record inserted in to the custom table.
Actually FI whe people create or delete some bank account from DEV client the transport request creates automatically and they transport that request to Quality and Production system to delete or create that account from all the systems. but when they delete the account all the informations related to that bank accounts get deleted from all the standered customize tables . to keep the track of that deleted account I have created one z table which is of type customize table. this table is filled automatically when any account get deleted from DEV system. now I want to pass that record to Quality and Production systems using transport request.
how can i create transport request when record get inserted into my ztable automatically.
Thanks in advance.
VinodHello All,
This is a FAQ and has been answered many times before in the forum.
1. Maintain delivery class 'C' it will start asking for a TR: False. Delivery class has got nothing to do with the TR prompt. It determines how the data is to be transported. A delivery class 'C' will prompt for a customizing request, whereas a delivery 'A' will prompt for a workbench request.
2. For the system to automatically prompt for a TR you have to select the "Standard Recording Routine" in the table maintenance generator. This will prompt you for a TR every time you try to create / modify a record & save it to the DB.
Hope i am clear in my explanation.
If your table is filled automatically through some coding you have to add the entry to the TR programmatically. Check this link for details: [http://wiki.sdn.sap.com/wiki/display/ABAP/TransportingTableEntriesinABAPprogrammatically|http://wiki.sdn.sap.com/wiki/display/ABAP/TransportingTableEntriesinABAPprogrammatically]
BR,
Suhas
Edited by: Suhas Saha on Mar 31, 2010 11:22 AM -
How to create transport request for standard web template
hi all
can any one tell me the step by step procedure to create transport request for standard template?
thanks
shaliniBusiness Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
Message was edited by:
Jerome -
How to create transport to move table contents?
Hello all:
I updated some z table (added some data) but it did not create a transport so that I can move to QAS! Could someone please tell me the steps to move table contents to move to QAS i.e, how do I force to create a transport for this so that I can move the contents to QAS?
Thanks.
MithunCheck the below code ,if you maintain table maintaince for your ztable then select second radio button ,add your table name ( Bold).
This will goto Sm30 and when you create entries ,when you click on save button this will ask transport request.
I used to follow this program when ever transport request is required.
REPORT ztable_maintain .
Table diclaration
tables: tvdir.
Selection screento table View
selection-screen skip 2.
parameter p_tabnm(30) as listbox visible length 30 obligatory.
selection-screen skip 1.
selection-screen begin of block s1 with frame title text-001.
parameter: p_radio1 radiobutton group g1,
p_radio2 radiobutton group g1.
selection-screen end of block s1.
Add values to list box
at selection-screen output.
type-pools: vrm.
data: name type vrm_id,
list type vrm_values,
value like line of list.
name = 'P_TABNM'.
refresh list.
<b>value-key = 'V_024'. " Add your table name</b>
value-text = text-002. "'V_024-Purchasing Groups'.
append value to list.
call function 'VRM_SET_VALUES'
exporting
id = name
values = list.
start-of-selection.
Get flag of corresponding table view
select single tabname flag from tvdir into tvdir
where tabname = p_tabnm.
Set flag of corresponding table view
if p_radio1 eq 'X'.
if tvdir-flag ne 'X'.
update tvdir set: flag = 'X'
where tabname = p_tabnm.
endif.
endif.
if p_radio2 eq 'X'.
if tvdir-flag eq 'X'.
update tvdir set: flag = ''
where tabname = p_tabnm.
endif.
endif.
Execute View/Table
call function 'VIEW_MAINTENANCE_CALL'
exporting
action = 'U'
view_name = p_tabnm
exceptions
client_reference = 1
foreign_lock = 2
invalid_action = 3
no_clientindependent_auth = 4
no_database_function = 5
no_editor_function = 6
no_show_auth = 7
no_tvdir_entry = 8
no_upd_auth = 9
only_show_allowed = 10
system_failure = 11
unknown_field_in_dba_sellist = 12
view_not_found = 13
others = 14.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Reset flag of corresponding table view
update tvdir set: flag = tvdir-flag
where tabname = p_tabnm.
Thanks
Seshu -
How To create transport to delete the test bapi.
Hi guys,
I have created a ztest bapi before creating the original bapi required.
Both are under same function group and both are under main transport request number as the different subtasks.
Now I want to create a transport to delete the Ztest bapi. How do I do that?
Example:
A->The main transport request
A1 -> Ztestbapi subtask number
A2-> bapi reuired subtask number
Now I want to delete A1 and create a transport to delete A1.
And provide this transport to the client.
Thanks in advanceHi,
I have not released any. Please give me the steps to follow to create the transport to delete ztest bapi.
Like I tried to go to T.code se80 and provided the function group name under which I got the bapis i created.
when I right clicked on Ztest bapi, I found the option delete.Can i delete here? -
How to create transport request to transport company logo for ALV report
When I create company logo ZCOMP via transaction OAER, it works fine and it showed on my ALV Grid report. Is it possible to transport this Logo to QAS and PRD or I have to go to each client and create separately. I do not have authorization in PRD, therefore I like to do the transport.
Thanks.hi,
yes is possible
go to transaction OAER with
class name = 'your class name'
classtype = 'your class type'
object key = 'your object key'
execute program
set cursor on the picture that you want to transport then click on the last button on the gui status or press SHIFT+F12 or Document->transport.
now a popup appear for confirm the transport then u can create you Change Request.
Regards
Marco -
How to create transport package
Hi gurus,
I'm working on afresh BW system and need to create the transport package
By defaults all the objects are stored under $TMP package
Please advice
Thank yougoto rsa1--> transport conenction --> collect all your objects which you know that are in $TMP package..
right click on each object and click on change package --> it will prompt a window asking for package name --> enter your package and click ok -- it will ask for transport request.
If package is not created in the system then all the developments will be automatically collected in to $TMP package.
use Transaction SE80 --> select Development co-ordination here u can create package ...
check with BASIS if the package is created for your developments in BW dev system. -
How to create transport request for business function activation?
Hi Gurús,
I activated LOG_MM_MAA_1 business function in development (DEV) system:
Component: SAP_APPL
Release: 604
Level: 0006
SP: SAPKH60406
I want to transport the activation to quality (QAS) system.
In SFW5 transaction --> System Settings --> Transport only generated a workbench transport request with "Status Tables Switch Framework Client-Independent" (Object type = SF02, Object = A)
Is this the only object to transport?
Is the activation of business function should be direct in QAS system?
Thank in advance
Alonso Valenzuela> In SFW5 transaction --> System Settings --> Transport only generated a workbench transport request with "Status Tables Switch Framework Client-Independent" (Object type = SF02, Object = A)
> Is this the only object to transport?
Yes.
The "after import" method during the transport will activate the BF as it did in the original system.
> Is the activation of business function should be direct in QAS system?
No, transport it.
Markus
Maybe you are looking for
-
Hi all, I have a 2013 farm set up with the App model 1 web application for path based site collection using host name 1 web application with SSL (no host name) 1 web application for mysite My business request is that I need to migrate SSL enabled 20
-
Default namespace have to be the first in xmlnamespaces()
Hi, for some reason default namesapace have to be the first namespace and then you can add other namespaces. SQL> select * from v$version; BANNER Oracle Database 10g Enterprise
-
Hi, I want help for a problem.I have kept the JSP code in the end but before that I will explain the scenario. I have to create a department.There is provisio to create 1 to 10 department in a jsp. A dept. has five different types of details which us
-
I moved from CS 3 to CS 5.5 In the Property Inspector, I can no longer find the Style or Size box. How do I get those back. I use the Size box to change a font on the fly. Thanks, CMA
-
PSE9 and Organizer with my MAC.
I have been using PSE8 c/w Bridge CS4 with great success. The trial version of PSE9 seems to have a problem cataloging my existing files. About 15%-16% of my files will not load from the viewed folders, stating that nothing was imported due to damage