How to Create USB boot for MBP81.0047.B27
How to Create USB boot for MBP81.0047.B27
For Windows, can't be done.
For OS X, use the program LionDiskMaker: http://liondiskmaker.com. Follow the instructions on the website.
Similar Messages
-
So I've been using the wiki and I'm trying to create a boot usb drive of Arch. So it says not to use unetbootin so ive been trying to do this through the terminal with dd.
So background is I have 3 computers at my disposal. An old windows xp computer, a ubuntu computer and a windows 8 computer.
I'm trying to use the ubuntu computer to do this.
So i downloaded.
root-image.fs.sfs
archlinux-bootstrap-2013.11.01-x86_64.tar.gz -extracted
archlinux-bootstrap-2013.11.01-x86_64.tar.gz.sig
archlinux-2013.11.01-dual.iso.torren
archlinux-2013.11.01-dual.iso.sig
archiso.img
vmlinuz
I have one copy in downloads another in documents.
typing df -h i see my usb stick is /dev/sdb1 so i know i should use sdb
than i used sudo dd bs=4M if=/path/to/archlinux.iso of=/dev/sdb && sync
i have tried without && sync
i was used
archlinux.iso
archlinux-2013.11.01-dual.iso.torren
archlinux-2013.11.01-dual.iso.sig
archlinux-2013.11.01-dual.iso
and even tried all the names of all the files I have downloaded
sometimes I get prompted for a password but every time it ends in No such file or directory
I know I'm probably overlooking something but I cant figure out what.Another way is using su command first, and then, something like this:
dd if=/home/youruseraccount/Downloads/archlinux-2013.11.01-dual.iso of=/dev/sdb bs=4M
Using the tab key you can avoid typos (sure you know that).
And remember umount device sdb1 (your usb stick)
To get items formatted see BBcode at bottom in the reply web page.
Maybe you can't see all the code line, it finshed with of=/dev/sdb bs=4M
edit/added
And when finish, use command exit to get out from superuser session.
Last edited by Alber (2013-11-06 20:33:24) -
How to create a boot disc from Lion pre installed into my Macbook Pro 2011 ?
Hi guys,
I want to know how to create a boot disc from Lion pre installed into my New Macbook Pro ?
I want to re-install the Lion from zero. When I bougth it I´ve used the Migrant assitance and now I want to re-install the Lion. How can I do it ?
thanks.Read this about creating a lion recovery on an external drive or USB stick.
http://support.apple.com/kb/HT4848
/Dennis -
Has anyone tackled USB booting for Zen 7? I have seen, used and modified
for Zen 6.5 but not zen 7.
ScottOriginally Posted by zendude
Chris Unsted (remove Nos to reply) Wrote:
>
> Modifiying the parameters for the boot from the cd to hard disc in
> syslinux.cfg
> * dropping the CDBOOT=YES
> * Adding an extra parameter install=hd:/dev/sda1 so that it figures
> out how to do the hw detecty bits.
> ^^^ Does anyone have a better way of doing this as we have to have a
> different boot option (/dev/sdb1) for machines with an inbuilt sata
> drive.
>
> Chris
This worked great. In order to make sure that your usb is always
loaded first in the initrd file system there is a file that tell
linuxrc what to do: linuxrc.config . In that file is an option
SCSIbeforeUSB set to 1. Change that option to 0 and, voila your usb
drive will always be mounted as /dev/sda1.
zendude
Is there any way to edit the ZIS info when the machine is booted from USB? I cannot see the info already there, and any info I save is not really saved because when I boot to Windows and check it with ziswin it still shows the old data.
When I boot from a CD I can see the data (zisview). -
How to create a macro for a planning type in MC8b transaction
Hi,
I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
but i need to create a macro for this planning type .
can any body give the details information how to create a Macro for a planning type.
Thanks and regards
GopalKrishnaDear Gopal
May be the link would be helpful to you.
[Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
Drill down the left tab once you opened the link, for more information.
Thanks
G. Lakshmipathi -
How to create custom infotype for training and event management
hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzalHi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini -
How to create one TO for multiple TRs
Dear All,
how to create one TO for multiple TRs, kindly suggest me
Regards,
baluAs for your question: it is discussed in sAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
Sorry I misunderstood your question.
The above mentioned solution won't create one single TO from multiple TR.
Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM -
How to create one checksum for 264 vis
Hi,
How to create "one Checksum" for 264 Vis.These 264 Vis are Interlinked if i change code for any .vi the checksum Should be update.This checksum is shown on the main window.
Regards
Ravindranath
Solved!
Go to Solution.Here's a slightly simplified version (saved in 8.6). There's no need for the Get/Set File Position. The file position is already being incremented with the read.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Multiple File MD5 Checksum (Version 8.6).vi 23 KB -
How to create new scope for SharePoint calendar?
How to create new scope for SharePoint calendar?
I have a calendar list to which I want to create following scopes-
Annual View
Half Year 1 (Jan-June)
Half Year 2 (Jul-Dec)
Quarter 1 (Jan-Mar)
Quarter 2 (Apr-Jun)
Quarter 3 (Jul-Sep)
Quarter 4 (Oct-Dec)
How this can be created. Any help appriciated. Thanks.Hi Pratima,
Can you please see below link and code snippet for how to
format date in gridview.
http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Gridvew Date format</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
<RowStyle BackColor="#EFF3FB" />
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" />
<Columns>
<asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
<asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
<asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
<asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
<asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Hope this will help you.
Regards
Soni K -
How to create a PR for each Maintenance Order
Dear All,
Please guide me how to create a PR for each Maintenance Order.
I test on Ides, I have some Maintenance Orders, all of them require the same stock material. When I run MRP, system always create one PR for all requirements. I don't know how to change.
Regards,
QuangDDHi,
As you planning for Stock Items, by running MRP, system will create single PR only. If it is non stock items, then it would be possible to create different PR based on Orders.
Regards,
Maheswaran. -
How to create t-code for a table and how to create transaction variant???
Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1. how to create transaction code to a table. Can any one give me the
staps??
2. how to create transaction variant for the above requirement???
Thanks & Regards,
SarkarHi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful -
How to create transaction code for a Z-table
How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be givenHi Sam,
<b>Procedure to create a TCODE for ZTABLE:</b>
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
<u><i>Se93 --> then which radio button to be selected</i></u>
Select the parameter transaction as a radio button.
<u><i>what is the program nam e to be given</i></u>
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar -
How to create transaction code for maintenance view
hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful. -
How to create a substitute for requester in SRM 7.0
Hi,
do you know how to create a substitute for requester?
we have groups of 2 people and we want that they can see and edit shopping carts one of each other. Do you know how is it possible? it will be necessary for all SCs.
Thanks.
Regards,
NelsonYou can use the "Team Cart" feature introduced in SRM 7 for your requirement.
Take a look at this wiki page for more information http://wiki.sdn.sap.com/wiki/display/SRM/Team+purchasing
Edited by: Jay Yang on Mar 31, 2011 10:47 AM -
How to create internal table for a structure in BSP
hi ,
I have created a Structure in BSP.I want to create an internal table for that Structure. But in my coding ie.
<% data: begin of itab_1 .
include type zuvendstr.
data:end of itab_1.
data wa_str like line of itab_1.
loop at itab_1 into wa_str. %>
<tr>
<td><%=wa_str-name%> </td>
<%endloop.%>
In this zuvendstr is Structure ,wa_str is workarea and itab_1 is an Internal table.But it is showinng an error that itab_1 is unknown.But we cannot define internal tables for an Structure in Page Attributes.So,please resolve how to create internal table for Structure in BSPSHi,
You can define itab_1 like this (assuming zuvendstr is a structure type):
DATA: itab_1 TYPE TABLE OF zuvendstr.
Regards,
Tanguy
Maybe you are looking for
-
IMovie very slow -- how do you stop it showing all clips?
hi. i'm using iMovie 11, Mountain Lion, and a brand new, latest model, retina macbook (one month old), and i'm trying to figure out why my iMovie is so slow. i originally imported all of my clips and photos into iPhoto, with no problem, and iMovie is
-
How do i restore the information in my iphone back to how it was before I changed it?
I accidentally didn't know what I was doing and ended up changing all my settings. It deleted all my contacts now I searching a way to get all my previous data back, any ideas? Please I am in desperate need of help. I was trying to put music in my ph
-
Function Module To Change TIME from GMT to CST
Hello All, Can anyone tell me if there is any Function Module to convert the TIME from GMT to CST? Regards
-
Hello, well, my question is: I have one central route (Cisco Catalyst 3750G-48TS-S) and twenty Switch with layer three ios (Cisco 3560G-24) conected in star topology.... What i want to know is, how central router can communicate with just another rou
-
I am involved in new SEM-BPS implementation and I have to develop an interface program to read csv ( flat file ) from from a server into BW for reconciliation in BPS. I am new in BW, please can you tell me the best approach with examples if possible