How to Create User define forms.

Hi,
We are replace old system of our Client. Client has some Exit form,approval form for terimination of employee and approval to access various resource respectively.
Can any one tell me how to achive this in OIM.

Go through some OIM Document first and you'll be able to find out exact components to achieve the same.

Similar Messages

  • How to create user defined button in alv report

    how to create user defined button in alv report
    thnks in advance.

    Hi,
    U can define it the the PF-STATUS ( Menu for ALV ).
    For that u have to define it in the EVENTCAT.
    form z_eventcat  using    p_i_eventcat type slis_t_event.
      data: i_event type slis_alv_event.
      call function 'REUSE_ALV_EVENTS_GET'
        exporting
          i_list_type     = 0
        importing
          et_events       = p_i_eventcat
        exceptions
          list_type_wrong = 1
          others          = 2.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
      clear i_event.
      read table p_i_eventcat with key name = slis_ev_top_of_page into
      i_event.
      if sy-subrc = 0.
        move 'TOP_OF_PAGE' to i_event-form.
        append i_event to p_i_eventcat.
      endif.
      read table p_i_eventcat with key name = slis_ev_pf_status_set into i_event.
      if sy-subrc = 0.
        move 'SET_PF_STATUS' to i_event-form.
        append i_event to p_i_eventcat.
      endif.
      clear i_event.
      read table p_i_eventcat into i_event with key name = slis_ev_user_command .
      if sy-subrc = 0.
        move 'USER_COMMAND' to i_event-form.
        append i_event to p_i_eventcat.
      endif.
    And in the DISPLAY
    call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
         i_callback_program                = v_progname
         i_callback_pf_status_set          = 'SET_PF_STATUS'
         i_callback_user_command           = 'USER_COMMAND'
         i_callback_top_of_page            = 'TOP_OF_PAGE'
         i_grid_title                      = v_gridtitle
         i_save                            = 'A'
         is_layout                         = i_layout
         it_fieldcat                       = i_fieldcat[]
         it_sort                           = i_sortinfo
         it_events                         = i_eventcat
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
        tables
          t_outtab                          = it_final
       exceptions
         program_error                     = 1
         others                            = 2
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    *MENU SETTINGS.
    form set_pf_status using rt_extab type slis_t_extab.
      set pf-status 'ALV_MENU'.
    endform.                    "SET_PF_STATUS
    endform.                    " Z_EVENTCAT
    Now double click on ALV MENU nad u can create a button in the application bar.
    Regards,
    Pritha.

  • How to create User Defined Variables in Procurement Contract 12.1.3

    Hi,
    We are using Procurement Contract 12.1.3. As per our business requirement while creating contract template we need to use many variables which are not available in 'System Defined' variable list. Please guide us with some samples (step by step) how to create the 'User defined' variables.
    Regards,
    Prabhu

    Hi Prabhu,
    Did you get the setps how to create user defined variables in Procurement contracts? if so please share me the setp by step flow.
    Prakash

  • How to create user defined transactioncode in bw

    hi,
    How to create user defined transactioncode in bw.My user want this
    regards,
    Abhishek

    hi 
    by using the t code SE93 u can create.
    after that it will ask u for what ur going create
    1.Program and screen
    2.Program and selection screen
    3.method of class
    4.transaction with variant
    5.transaction with parameter
    here u have to select appropriate option based on ur requirement
    and enter the options as per ur needs save and activate

  • How to create user defined functions in xi.

    how to create user defined functions in xi.
    can anyone give info with screen shots.

    Hi,
    Please follow the  steps mentioned in below link
    http://help.sap.com/saphelp_nw04/helpdata/en/f8/2857cbc374da48993c8eb7d3c8c87a/frameset.htm
    also refer below links to know more about UDF
    udf
    Thanks
    Swarup
    Edited by: Swarup Sawant on Mar 3, 2008 3:59 PM

  • How to create user defined metrics for SQL Server target?

    The customer is not able to create a user defined metrics for SQL Server target.
    This is very important for him to use this product.
    He is asking how to create user defined metrics?
    I sent him Note 304952.1 How to Create a User-Defined SQL Metric in EM 10g Grid Control
    But it would work for an Oracle DB, but his target is SQL Server DB
    Not able to find the "User-Defined Metrics" link from Database home page.
    How to create user defined metrics for SQL Server target?

    http://download-uk.oracle.com/docs/cd/B14099_19/manage.1012/b16241/Monitoring.htm

  • How to create User defined templates

    Hi all,
    I want to create user defined templates for pages and regions and how to create form templates and report templates.
    pls help me.
    thanks
    mani

    Hi Mani,
    If you copy a template in ApEx, you have your own version of that template.
    If you then alter the code in your version of the template, you have your own custom version.
    If you don't understand the underlying HTML, you are going to struggle.
    Regards
    Michael

  • How to create user using Form Builder

    How can use Oracle Developer2000 Form6 to create user in database (oracle 8i) from Trigger of Form6. I've try to use statement "create user ..... identified by ...." in PL/SQL editor of When-Button-Pressed trigger and it had complilation error with that statement.

    Probably best not to create the user directly from Forms.
    Create a DB Package with a procedure to create a user. This proc should take, e.g. username & password as parameters (& maybe other things - default tablespace, etc.):
    PROCEDURE cre_user(p_username VARCHAR2, p_password VARCHAR2) IS
    BEGIN
    EXECUTE IMMEDIATE('CREATE USER '||p_username||' IDENTIFIED BY '||p_password);
    END cre_user;
    Give the package the correct user creation privileges & DEFINER or INVOKER s rights.
    Grant EXECUTE on the package (or its SYNONYM) to the appropriate end-users
    Finally, call the packaged procedure from your Form with the appropriate parameters.
    If you need to return info. to the Form, use OUT parameters.
    Also, consider the security implications of sending the password in an unencrypted form.

  • How to create User-defined Transform in BODS

    Hi,
    Is there documents explaining how to create a User-defined Transform in BODS Designer?
    Thanks
    Rex

    Hi,
    Please follow the  steps mentioned in below link
    http://help.sap.com/saphelp_nw04/helpdata/en/f8/2857cbc374da48993c8eb7d3c8c87a/frameset.htm
    also refer below links to know more about UDF
    udf
    Thanks
    Swarup
    Edited by: Swarup Sawant on Mar 3, 2008 3:59 PM

  • How To Create User-Defined DateTo and DateFrom?

    This document https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84 describe techniques used to create BI Infocubes.
    In chapter 4.4.2.4 Report only on data for constellations valid today and yesterday (comparable results) - today and yesterday.
    ...Report only on data for constellations valid today and yesterday (comparable results): Solution
    Given an attribute&#8211;characteristic relation.
    Define the dependent attribute as a time-dependent navigational attribute of the characteristic. Define
    additionally user-defined DateTo and DateFrom time-dependent navigational attributes. Together with the
    query key date and a filter on DateTo and DateFrom excluding your reporting time span, you will get the
    desired result.
    MatGr-SID  From-User   To-User    From-Sys   To-Sys   Material   Material-SID
         910        01/1000       12/9999     01/1000    12/9999     AAA    001
         910        01/1000       09/1998     01/1000    09/1998     BBB    002
         920        10/1998       12/9999     10/1998    12/9999     BBB    002
         920        01/1000       12/9999     01/1000    12/9999     CCC    003
         920        01/1000       12/9999     01/1000    12/9999     DDD    004
         920        10/1998       12/9999     10/1998    12/9999     EEE    005
    Report  showing comparable results
    Material group  Rev 09/98     Rev 10/98 
        X                  100             100
        Y                  200             200   
    HOW TO Create From-User   To-User attributes?

    Hi Monica
    Third party software is available,from AccessVia, that can be used to create and update templates. Sample sample sqt can help you to understand the required inputs (batchID, templateID, departmentID, locale).
    Thanks
    Himanshu

  • How to Create User Defined Template in Back Office with Labels and Tags App

    Hello,
    Can anyone help me in creating a user defined template in Back Office with Labels and Tags Application. I'm currently using version 13.2.?
    Kindly help me out asap.
    Thanks,
    Monica.

    Hi Monica
    Third party software is available,from AccessVia, that can be used to create and update templates. Sample sample sqt can help you to understand the required inputs (batchID, templateID, departmentID, locale).
    Thanks
    Himanshu

  • How to Create user-defined Dependency : thru CT04

    Hi guys,
    for batch management , i have to create a new  Characteristic Class ( which is copy for Characteristic Class LOMB_VERAB) and i have to add one more condition in that.
    <b>Code of Standard Class</b>
    [code] $SELF.LOBM_APO_SL_MIN = 0
      if LOBM_HSDAT = LOBM_VERAB,
    FUNCTION SL_MIN_COMPUTE
      (LOBM_HSDAT      = LOBM_HSDAT,
       LOBM_VERAB      = LOBM_VERAB,
       LOBM_APO_SL_MIN = $SELF.LOBM_APO_SL_MIN)
      if LOBM_HSDAT specified and
         LOBM_VERAB specified
    *[/code]
    in that new Class , i have to check
    1.Lobm_hsdat is initial or not?
    2. i have to add 8 days to that one
    i.e lobm_verab = lobm_hsdat + 8.
    when i do like that its giving Syntax errors?
    How Can i Implement my Logic over there
    can i expect any inputs ?
    regards
    Prabhu
    TC-team SAP
    pepsi inida
    [email protected]

    Prabhu,
    Can you pls help me out, how you solved the issue? am also having similar kind of requirement and getting syntax errors...
    Ram...

  • Regarding query generation to user defined forms

    Hi all,
    i had created user defined form with some fields and tables
    tables in the sense matrix
    i had entered the data in that table
    and added that data
    after that i came back to that form and used the fields that are below the table to calucalate the maximum and minimum from the columns of matrix
    so to get the data of that particular form only i used the $ command to extract data depending on the report number
    but iam unable to get the result
    any one help me regarding this
    it is required urgent
    Thanks And Regards
    sravanth.sm

    Sravanth,
    Let's see if I can help you.
    Assume your form's title table is called @TITLE and the matrix table is called @ROWS. In the form's title you have the record key DocEntry. In the Matrix you have a column COLUMN from were you are going to get some value. ok?
    Maximum of the column
    SELECT Max(T0.COLUMN) FROM [dbo].[@ROWS] T0 WHERE T0.DocEntry=$[@TITLE.DocEntry]
    To get the minimum, just use the Min() function.
    Regards,
    Vítor Vieira

  • How do we create user defined Task in OM & Which report we run for the Task

    Hi
    How do we create user defined Task in OM & Which report we run for the Task.
    Regards
    Rajesh

    You can create tasks using PFCT or path: Human resources> Organizational management> Expert mode> Task catalog in Easy access.
    Check this link may be useful for you: http://help.sap.com/saphelp_40b/helpdata/pt/fb/135d89457311d189440000e829fbbd/content.htm

  • How to create a LOGIN Form & LOGIN ID & PASSWORD for END USERS

    hi,
    i have just created a Database and Forms & Reports using developer 6i.
    now i want to deleiver that Database to end users, but i dont know that how to create a LOGIN Form for the end users and also i want to assign each user a Login ID & Password.
    Plz help me to solve out this problem.

    1. Create the user accounts on the database CREATE USER ... IDENTIFIED BY...
    2. Grant CONNECT Role to the Users
    3. in the main form (the one which is being called initially at runtime) in the ON-LOGON-Trigger create a CALL_FORM() to the Login Form
    4. The Login Form will be called; build a Block with username, password and a Button
    5. In the Button call the LOGON Built-In
    6. Control will be passed to the initially called form again
    I also noticed a thread in here explaining this in more detail...
    Message was edited by:
    user434854

Maybe you are looking for