How to create user in Client 001 in ABAP TRIAL version?

Hi, I downloaded SAP BI ABAP trial version and installed on windows server 2003. I am not able to create new user in client 001 where I can create Infocubes.
I followed below this link
http://wiki.sdn.sap.com/wiki/display/BI/SettingUpBIinNetweaver7.0ABAPTrialversion
I logged in client 000 using BCUSER. I used txn SE16 . Entered RSADMINA and BWMANDT was already 1. I created a new user here and gave SAP_ALL and SAP_NEW authorizations.
Now using this new user when I try to login into client 001 then I get invalid login but when I try to login in client 000 then I can login fine.
Is there anything which is missing from the note or I am doing something wrong?
Any help would be appreciated.
Thanks

Thanks Sven, I forgot my old post about the same issue.
The material is wrong. When software is installed then it is fine for client 000. In order to login and work in client 001 just login with user DDIC and password minisap in client 001 and create user BCUSER with SAP_ALL and SAP_NEW profiles. Once this user is created login into client 001 with this user. Once you try to do something then it will ask to create logical system. Follow this material in creating logical system from there.
Thanks,

Similar Messages

New User - SAP NetWeaver 7.0 - ABAP Trial Version

Our company as developed software link from our application to the SAP Plant Maintenance (PM) module.
To simply the discussion, please assume that the link only creates a PM Notification. Currently this is done via RFC to IQS4_CREATE_NOTIFICATION.
One of our biggest challenges in developing the link for our Oil Refinery customers is the fact that we do not run SAP in our development office. This makes it very difficult to maintain the link because we need to rely on our customers systems to test any changes we make.
In the past, we have made several attempts to purchase a developer license to SAP but could not determine the correct sales avenue. We ended up talking to sales people who told us that we needed to spend $50,000.
Recently, I have installed SAP NetWeaver 7.0 - ABAP Trial Version. I have it running and can log into the SAP GUI and I can make remote function calls to the Airport demo that is installed with it. This environment appears to have everything that I need to develop our link but I can not figure out how to install the PM module. I am not sure if this is even possible.
So here are my questions:
1) Can the PM module be activated/installed in the SAP NetWeaver 7.0 - ABAP Trial Version?
2) Would this be included if we purchase the SAP NetWeaver, Development Subscription for $2,300/year.

1. No
2. yes it has everything

How to create user in UME when using ABAP as datasource

hi, everyone
We are using ABAP as EP user datasource, when create user in EP, it says "Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration."
But we can not create in UME neither, anyone know how to do this?
Lee

Hi,
Solution would be to disconnect the UME from ABAP and reboot the portal, create the user in UME, and revert back to the UME/ABAP connection again... but this is not supported:
Changing Data Source
Once you have chosen this data source configuration, you cannot change to any other data source configuration. For details, see SAP Note 718383.
Source: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/af3ac012d32e78e10000000a155369/frameset.htm
Ask the autorisation team of the ABAP stack that is connected to you UME to create the user for you is the only solution.
Cheers,
Benjamin

How to create user's in Middleware

Hi All,
How to create user's in Middleware(J2EE stack).When we create user's in ABAP stack it has to reflect that user in J2EE stack also. In old version of mobile using WebConsole there was an option by running that program able to see created user's in ABAP stack in WebConsole too. What I mean to say how can get user's synchoronization in between ABAP stack and J2EE stack. Is there any link to know better Administration of J2EE stack. Please let me know
Thanks in advance.
Regards,
Ameer Baba.

hi Ameer,
You arent able to see the ABAP users on your Java stack simply due to the fact that the User management Engine of Java stack is not properly configured to connect to a particular client of ABAP stack.
Please check this link for more information
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/1bbdccc7850064e10000000a1553f7/content.htm
If you are still unable to solve the problem please address it in UME forums so that you get a speedy resolution
regards
sunil

How to bring sap* in client 001

Hi ,
By mistake i deleted all users in client 001 at db level
( delete from SAPR47.USR02 where mandt=001)
It is a test system, and 3 rows got deleted when i executed above coomand ( DDIC, SAP*)
How can i bring back the ddic and sap* in 001
Regards,
Chitra

Hi,
Set parameter login/no_automatic_user_sapstar = 0
Restart the SAP instance.
Then login client 001 with user sap* and password as pass.
Once you login to system, do client copy from 000 to 001 using profile SAP_USER.
Thanks
Anil

How to create user defined button in alv report

how to create user defined button in alv report
thnks in advance.

Hi,
U can define it the the PF-STATUS ( Menu for ALV ).
For that u have to define it in the EVENTCAT.
form z_eventcat using    p_i_eventcat type slis_t_event.
data: i_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
    exporting
      i_list_type     = 0
    importing
      et_events       = p_i_eventcat
    exceptions
      list_type_wrong = 1
      others          = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_event.
read table p_i_eventcat with key name = slis_ev_top_of_page into
i_event.
if sy-subrc = 0.
    move 'TOP_OF_PAGE' to i_event-form.
    append i_event to p_i_eventcat.
endif.
read table p_i_eventcat with key name = slis_ev_pf_status_set into i_event.
if sy-subrc = 0.
    move 'SET_PF_STATUS' to i_event-form.
    append i_event to p_i_eventcat.
endif.
clear i_event.
read table p_i_eventcat into i_event with key name = slis_ev_user_command .
if sy-subrc = 0.
    move 'USER_COMMAND' to i_event-form.
    append i_event to p_i_eventcat.
endif.
And in the DISPLAY
call function 'REUSE_ALV_GRID_DISPLAY'
   exporting
     i_callback_program                = v_progname
     i_callback_pf_status_set          = 'SET_PF_STATUS'
     i_callback_user_command           = 'USER_COMMAND'
     i_callback_top_of_page            = 'TOP_OF_PAGE'
     i_grid_title                      = v_gridtitle
     i_save                            = 'A'
     is_layout                         = i_layout
     it_fieldcat                       = i_fieldcat[]
     it_sort                           = i_sortinfo
     it_events                         = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    tables
      t_outtab                          = it_final
   exceptions
     program_error                     = 1
     others                            = 2
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*MENU SETTINGS.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ALV_MENU'.
endform.                    "SET_PF_STATUS
endform.                    " Z_EVENTCAT
Now double click on ALV MENU nad u can create a button in the application bar.
Regards,
Pritha.

How to create user groups in SAP

Hello Gurus,
Can anyone let me know how to create user groups in SAP-HR Module and who will be creating the user groups.
plz provide me the steps.

Hi Stephanie,
IMG --> Personnel Mgmt --> Personnel Administration --> Basic Setting s --> Maintain User Parameters
Please refer the below links:
http://scn.sap.com/thread/1653026
http://scn.sap.com/thread/1682721
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5?QuickLink=index&overridelayout=true&44478681629499
Thanks,
Madhav.

How to create User and Database in different Table spaces

How to create User and Database in different Table spaces using oracle 10g
Regards
daya

I am sorry but your question does not seem to make much sense.
Can you please rephrase your question?

How to create User Defined Variables in Procurement Contract 12.1.3

Hi,
We are using Procurement Contract 12.1.3. As per our business requirement while creating contract template we need to use many variables which are not available in 'System Defined' variable list. Please guide us with some samples (step by step) how to create the 'User defined' variables.
Regards,
Prabhu

Hi Prabhu,
Did you get the setps how to create user defined variables in Procurement contracts? if so please share me the setp by step flow.
Prakash

How to create user defined transactioncode in bw

hi,
How to create user defined transactioncode in bw.My user want this
regards,
Abhishek

hi
by using the t code SE93 u can create.
after that it will ask u for what ur going create
1.Program and screen
2.Program and selection screen
3.method of class
4.transaction with variant
5.transaction with parameter
here u have to select appropriate option based on ur requirement
and enter the options as per ur needs save and activate

How to create user defined functions in xi.

how to create user defined functions in xi.
can anyone give info with screen shots.

Hi,
Please follow the steps mentioned in below link
http://help.sap.com/saphelp_nw04/helpdata/en/f8/2857cbc374da48993c8eb7d3c8c87a/frameset.htm
also refer below links to know more about UDF
udf
Thanks
Swarup
Edited by: Swarup Sawant on Mar 3, 2008 3:59 PM

How to create user defined metrics for SQL Server target?

The customer is not able to create a user defined metrics for SQL Server target.
This is very important for him to use this product.
He is asking how to create user defined metrics?
I sent him Note 304952.1 How to Create a User-Defined SQL Metric in EM 10g Grid Control
But it would work for an Oracle DB, but his target is SQL Server DB
Not able to find the "User-Defined Metrics" link from Database home page.
How to create user defined metrics for SQL Server target?

http://download-uk.oracle.com/docs/cd/B14099_19/manage.1012/b16241/Monitoring.htm

How to create user editable Crystal Report with dynamic dataset

What I would like to achieve:
A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
What I do:
CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
CrReport.Load(TemplateFilename)
Dim Results As DataTable
DataTable is filled from a database
CrReport.SetDataSource(mResults)
CrReport.SaveAs(NewReportPath, True)
The NewReportPath is opened in the default program.
What are the problems
The report is open in preview mode (not in design).
When the field is added to the report the designer asks for XML datasource on preview.

The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?

How to create web service client

Hi All,
I am new to web services .Can any body explain how to create web service client ....
Please give the give the discription step wise.
Thanx
Arun

Hi Krishna,
Yes it is possible.
Check this Link
[JDeveloper Web Service|http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_wstopdown/wstopdown.htm#t2]
http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_wstopdown/wstopdown.htm#t2
I strongly suggest you to go for Eclipse, instead of Netbeans or Jdeveloper incase of WebService. If you want to run your code in all the Server without making any changes go for Eclipse based development for Web Service.
Kindly let me know if you need some more inputs.
Regards,
Zack

How to create User Exits in ECC 6

Hi Experts,
good day, i'm looking for any notes or learning materials on how to create User Exits in ECC 6. please send me the links.
thanks you for your usual support.

Hello,
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
Any Basics u wana know abt Enhancements.,.,go through the link.,
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
Thanks,
Swati

How to create user in Client 001 in ABAP TRIAL version?

Similar Messages

Maybe you are looking for