How to create user in local datasource when UME is already switched to LDAP
HI,
Info : I have portal ( NW 700), recently i switched the datasource of portal to LDAP from local datasource.
issue: if i create user in portal it get created in LDAP, i want create few users in Local datasource.
how to create user in local datasource when UME is already switched to LDAP?
one solution is change the ume back to local datasource > create user > then switch back to LDAP.
do you know any other sol?
Regards
Shridhar Gowda
Please let me know the Datasource file name .. i.e. the .xml filename.
try to analyze this name and see whether you get a solution or post it here.
Reward points if helpful -
Similar Messages
-
How to create user editable Crystal Report with dynamic dataset
What I would like to achieve:
A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
What I do:
CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
CrReport.Load(TemplateFilename)
Dim Results As DataTable
DataTable is filled from a database
CrReport.SetDataSource(mResults)
CrReport.SaveAs(NewReportPath, True)
The NewReportPath is opened in the default program.
What are the problems
The report is open in preview mode (not in design).
When the field is added to the report the designer asks for XML datasource on preview.The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?
-
hi,
how to create user dsn for microsodt access driver(*.mdb,*.accdb) using command line in 64 bit.
i have installed 64 bit drivers and when use following command
C:\Windows\System32>odbccad.exe CONFIGDSN "Microsoft Access Driver (*.mdb,*.accdb)" "DSN=GLDatabase|Description=GL Data Source|DBQ=C:\DataBase\1.mdb"
CONFIGDSN:'unable to create a datasource for the "Microsoft Access Driver (*.mdb,*.accdb)" component not found in the registry with the error code -2147467259
but it works with C:\Windows\SysWow64yes i have installed Microsoft Access Database engine 2010 redistributale => AccessDatabaseEngine_x64.exe
i can able to create user dsn using odbccad32.exe in system32 folder but using command line its not working
C:\Windows\System32>
odbccad.exe CONFIGDSN "Microsoft Access Driver (*.mdb,*.accdb)" "DSN=GLDatabase|Description=GL Data Source|DBQ=C:\DataBase\1.mdb"
CONFIGDSN:'unable to create a datasource for the "Microsoft Access Driver (*.mdb,*.accdb)" component not found in the registry with the error code -2147467259 -
How to create user's in Middleware
Hi All,
How to create user's in Middleware(J2EE stack).When we create user's in ABAP stack it has to reflect that user in J2EE stack also. In old version of mobile using WebConsole there was an option by running that program able to see created user's in ABAP stack in WebConsole too. What I mean to say how can get user's synchoronization in between ABAP stack and J2EE stack. Is there any link to know better Administration of J2EE stack. Please let me know
Thanks in advance.
Regards,
Ameer Baba.hi Ameer,
You arent able to see the ABAP users on your Java stack simply due to the fact that the User management Engine of Java stack is not properly configured to connect to a particular client of ABAP stack.
Please check this link for more information
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/1bbdccc7850064e10000000a1553f7/content.htm
If you are still unable to solve the problem please address it in UME forums so that you get a speedy resolution
regards
sunil -
Hi
How to create users on JDI... how to access JDI....
I want to create users, groups in JDI
Please help me....
Thanks & Regards
Ravi Shankar BHi
What is the difference b/w Inactive, active and Local DCs...
In inactive and active DCs i am not getting any thing... why?
and i need to know how to do the following configuration.....
Creating Users
The following shows you how to create various users. Developer and Admin are just placeholders for actual people. CMSadm, on the other hand, is the user name recommended by SAP for the CMS user used by the CMS to access the DTR, CBS, and SLD.
.1Choose Create User.
.2Create the users Developer, Admin, and CMSadm, in this order.
Assigning Users to Groups
.1 Choose Groups.
The Groups screen appears.
.2 In the Groups field, select the JDI.Developers role and choose Assign Users to ...
The Assign User(s) screen appears.
For more information, see the installation manual of SAP NetWeaver Development Infrastructure.
.3 Choose Add User ...
The Search for User screen appears.
.4 Enter the user ID Developer and choose Search.
The Search Result(s) screen appears.
.5 In the list, select the Developer user and choose Select.
On the Assign User(s) screen, you see a list of all users that have the JDI.Developers role. Developer has now also been included in the list.
.6 In the same way, assign the JDI.Administrators role to the users Admin and CMSadm.
If the SLD is installed on a separate J2EE Engine, you must also create the users Developer and CMSadm in this Engine as well.
Thanks & Reagards
Ravi Shankar B
Message was edited by: RaviShankar B -
Hi all,
I cannot get the hang of creating users in OTM. When I go to Oracle ATS Administrator, I can only set up users for the OLT database.
How do I create users for the OTM database?
Rgds,
BluHi Blu
You need to change the defaut database when you log in on the admin page.
There's the login & pwd field but also the drop down list allowing you to choose the database you want to manage.
Hope it helps
Cheers
JB -
How to create users in SAP BO (in cmc)
Hi All,
How to create users in SAP BO (in cmc) (pls step by step).
Thanks in Adavance,
NitinHi Erika
I need your help
"Account information not recognized.The secLDAP Security Plugin is not enabled.contact your system administrator for details."
I am getting an error page when i am try to access BO reports from Flex UI.
This BO reports should work in the same single sign on session with Flex UI as per the application developed.
Note :The same users when login directly login to BO get access.. -
How to create user defined button in alv report
how to create user defined button in alv report
thnks in advance.Hi,
U can define it the the PF-STATUS ( Menu for ALV ).
For that u have to define it in the EVENTCAT.
form z_eventcat using p_i_eventcat type slis_t_event.
data: i_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = p_i_eventcat
exceptions
list_type_wrong = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_event.
read table p_i_eventcat with key name = slis_ev_top_of_page into
i_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE' to i_event-form.
append i_event to p_i_eventcat.
endif.
read table p_i_eventcat with key name = slis_ev_pf_status_set into i_event.
if sy-subrc = 0.
move 'SET_PF_STATUS' to i_event-form.
append i_event to p_i_eventcat.
endif.
clear i_event.
read table p_i_eventcat into i_event with key name = slis_ev_user_command .
if sy-subrc = 0.
move 'USER_COMMAND' to i_event-form.
append i_event to p_i_eventcat.
endif.
And in the DISPLAY
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = v_progname
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_grid_title = v_gridtitle
i_save = 'A'
is_layout = i_layout
it_fieldcat = i_fieldcat[]
it_sort = i_sortinfo
it_events = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_final
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*MENU SETTINGS.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ALV_MENU'.
endform. "SET_PF_STATUS
endform. " Z_EVENTCAT
Now double click on ALV MENU nad u can create a button in the application bar.
Regards,
Pritha. -
How to create user groups in SAP
Hello Gurus,
Can anyone let me know how to create user groups in SAP-HR Module and who will be creating the user groups.
plz provide me the steps.Hi Stephanie,
IMG --> Personnel Mgmt --> Personnel Administration --> Basic Setting s --> Maintain User Parameters
Please refer the below links:
http://scn.sap.com/thread/1653026
http://scn.sap.com/thread/1682721
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5?QuickLink=index&overridelayout=true&44478681629499
Thanks,
Madhav. -
How to create an identical local copy of a mail without attachments?
Hi,
I would like to save a copy of an IMAP-Message to my db without the attachments.
As I cannot modify the original message, I tried to create a new MimeMessage with the constructor MimeMessage(MimeMessage source) and then remove the attachments - this works fine so far, but using this constructor only the body seems to get copied without subject, recipients or from-address.
Can anybody give me a hint how to create an identical local copy of a Message-Object? I would rather like to do this without installing any local third party providers.
Regards
KarstenSorry, found the problem - I did some things with the InputStream before I should not have - now the message gets saved without attachments and can be reopened.
-
How to create User and Database in different Table spaces
How to create User and Database in different Table spaces using oracle 10g
Regards
dayaI am sorry but your question does not seem to make much sense.
Can you please rephrase your question? -
How to create User Defined Variables in Procurement Contract 12.1.3
Hi,
We are using Procurement Contract 12.1.3. As per our business requirement while creating contract template we need to use many variables which are not available in 'System Defined' variable list. Please guide us with some samples (step by step) how to create the 'User defined' variables.
Regards,
PrabhuHi Prabhu,
Did you get the setps how to create user defined variables in Procurement contracts? if so please share me the setp by step flow.
Prakash -
How to create user defined transactioncode in bw
hi,
How to create user defined transactioncode in bw.My user want this
regards,
Abhishekhi
by using the t code SE93 u can create.
after that it will ask u for what ur going create
1.Program and screen
2.Program and selection screen
3.method of class
4.transaction with variant
5.transaction with parameter
here u have to select appropriate option based on ur requirement
and enter the options as per ur needs save and activate -
How to create user defined functions in xi.
how to create user defined functions in xi.
can anyone give info with screen shots.Hi,
Please follow the steps mentioned in below link
http://help.sap.com/saphelp_nw04/helpdata/en/f8/2857cbc374da48993c8eb7d3c8c87a/frameset.htm
also refer below links to know more about UDF
udf
Thanks
Swarup
Edited by: Swarup Sawant on Mar 3, 2008 3:59 PM -
How to create user defined metrics for SQL Server target?
The customer is not able to create a user defined metrics for SQL Server target.
This is very important for him to use this product.
He is asking how to create user defined metrics?
I sent him Note 304952.1 How to Create a User-Defined SQL Metric in EM 10g Grid Control
But it would work for an Oracle DB, but his target is SQL Server DB
Not able to find the "User-Defined Metrics" link from Database home page.
How to create user defined metrics for SQL Server target?http://download-uk.oracle.com/docs/cd/B14099_19/manage.1012/b16241/Monitoring.htm
Maybe you are looking for
-
How do I get hi-res photos from iPhoto to sync with new iPad
I hooked my new iPad up, and synced my iPhoto library to it, but once I went to view the photos on the iPad, it looks like they have all been turned into super low-resolution grainy versions. I was wondering if anyone had any luck getting full-size p
-
.mac Gallery says Safari is not compatible
On my MacBook and MacMini I get the message saying my current browser is not compatible with .mac gallery even though it is working fine on my iMac. I haven't had any problems until yesterday (when I uploaded a new set of pictures). Is this a tempora
-
Hello there, My customer is upgrading from 4.7 to ECC 6. In ESS they have lots of custom services that has HTML templates with in it. My Question is that during the upgrade process is that ok if we transport all programs, Easy Web Transactions (EWT),
-
Where can I find music to purchase from the iStore?
I bought an ipod shuffle and would like to purchace music from istore, but no matter where I look I can't find music or albums?
-
Cannot UPDATE my A. 2 ZS Driver
PLEASE advise and help! I have a new OEM Audigy 2 ZS Card installed so I went to Creative, registered it, and they said I can download drivers etc.. Thus, I went and downloaded the latest for this card; shown as .84.55 6.34MB dated 5/2/05 - - - then