How to create verification message in lookout?
I am using the lookout 6.5 Version and I want to create verification message on some event for operator verification. But I am not able to find any object or option for that. Kindly suggest.
I'm afraid lookout doesn't have a specific object to do so. It can be a new feature request, like a new object for operator's verification.
You can do it by current objects, but need some programming. For example, create a separate panel. The message is displayed on the panel, and switch or radio button on the panel for selection. When it meets a certain condition, the panel is activated.
Ryan Shi
National Instruments
Similar Messages
-
How to create system message in SAP EP?
Dear All,
How to create system message in SAP EP?
i need to find solution for this task. Is there any way without collaboration? For example in SLD there is "System message" without additional functions. Please help.
Portal installed on Netweaver 7.01 EHP1Hi Abay,
You need to develop custom application to accomplished your requirement for system message in the potral.
Please have a look at "Brodcast messages to logged on users in Portal:
Brodcast messages to logged on users in Portal(Part1)
Brodcast messages to logged on users in Portal(Part2)
Also you can develop system message in the KM and integrate in the portal.
Hope it will helps,
Regards, Arun Jaiswal -
How to create new message in wsdl
Hi all, how to create a new message apart from the request message and response message that get created when the BPEL process is created? For example, in LoanValidator project(this is the sample project that came with 10g instatllation), the request and response messages are LoanValidatorRequestMessage,LoanValidatorResultMessage and another message is there which is InvalidApplicationExceptionLoanValidatorMessage there. how to create this message? and its corresponding operation also.Thank you.
Regards,
user11275112messages are defined in the wsdl and have part(s) that refer to the real type / element. So just go to the wsdl that is the client partnerlink's one - and add yours there. the operation (defined in the portType) contains input / output / fault children. each referring to a message defined.
cheers clemens -
How to creat Process messages automatically through PI sheet saved?
How to creat Process messages automatically through PI sheet to the Process message destinations.
Hi Jessie,
When you process instruction category PROD_3 in master recipe, the process message PI_PROD is created.
After releasing process order, you have to create control recipe. Upon successful creation of control recipe, process instructions will get generated. Check the error log for control recipe creation for error if any.
Note that control recipe will be generated only with order status "Released".
You have to sent this control recipe to process control (CO53).
Hope it is helpful.
Regards,
Sachin -
How To create a message Choice for a page?
Hi,
I need to create a message choice for a page and on selection of that it should navigate me to next page..like
ex:
If iam havng 10 locations like Delhi,Hyderabad,Chennai....
I need to select one of them and it should be navigated to next page based on the above selection...These values are to be retrieved from database...
Can u gimme any idea..how to proceed?Maybe something like this will help.
On your <af:selectOneChoice/> component configure a valueChangeListener and set autosubmit to true.
In your valueChangeListener change the current view like :
public void handleValueChanged(ValueChangeEvent valueChangeEvent) {
// Add event code here...
if (!PhaseId.INVOKE_APPLICATION.equals(valueChangeEvent.getPhaseId())) {
valueChangeEvent.setPhaseId(PhaseId.INVOKE_APPLICATION);
valueChangeEvent.queue();
} else {
// add additiional app functionality here
ControllerContext controllerContext = ControllerContext.getInstance();
ViewPortContext viewPortContext = controllerContext.getCurrentViewPort();
viewPortContext.setViewId("test");
Regards,
Kenneth
The deferred execution of ValueChangeEvent is necessary as the ViewID can only be changed in INVOKE_APPLICATION phase. -
BI IP: How to create a message in custom developed planing function type
Hello experts,
I try to set a message in a ABAP planning function.
I created a own planning function type and implemented the class in ABAP.
Everthing is working fine until here. But how can I create a message which is visible in the report.
Is it just to use the command " MESSAGE" ?
Or do I have to use paramteres of the ABAP class.
I've just implemented the interface IF_RSPLFA_SRVTYPE_IMP_EXEC and cannot find parameters for this.
Thanks in advance
JohannesHi Johannes,
please check
Custom Messages WAD
Re: How to indicate a message by a planning function type in an ABAP-OO-Class
Regards Matthias -
How to create Support Message in Solaman
Dear All,
I know how to create message in satellite system and configuration required for that but now my requirement is to create message in solman only and then further process the same as usual. How can I do that.
NOTIF_CREATE is the transaction code for that but it ask for lot of details to create ticket. Can I create ticket form Help--->Create Support Message? Do I need to maintain table BCOS_CUST in solaman? What else configuration is needed to be done?
Regards,
NikhilHi Nikhil,
There can be many reasons for 513 error.
Please check the following steps in you systems:
Check the number range assignment for SLF1 in transaction dno_cust01.
Check for ur authorization of SAP_SUPPDESK_CREATE to create the messages.
Go to transaction DNO_CUST04. Select the field NO_USER_CHECK, and check the "filed value". should be X
Confirm Ur entries in Service Desk destinations in the Solution Manager System. OSS_MSG must exist
Regards,
Sunny -
How to create growl message in JavaFX
I want to create Growl message in JavaFX similar to to this:
http://translate.google.com/translate?sl=auto&tl=en&js=n&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fd.hatena.ne.jp%2Fbluepapa…
Can you tell me how I can do this or some basic instructions what I need to use to make this component.It is custom, but if you download the Ensemble sample from JavaFX Samples, you will find the code you want.
I should clarify that the toolbar is just a Toolbar with Buttons and the "custom" part is just all CSS. -
Hi, All
I need to create a message type, Enter the fields change pointers eligible for key changer in this message type. Extract program needs to be created and this program accesses the key changer fields status and the changed values on day to day basis for the message type using tables BDCPS & BDCPV.
Can any one tell me how to do this.
Many Thanks.Hello siri
I think if you talking with respect to ALE/IDOC or EDI/IDOC..........this posting has to be entered in data transfer.........................and you can create message type using trasaction we81.
Vj -
How to create general message in sap screen for all users
Hi Forum
I am using ECC6 version and i want to keep a message for all the users for assistance (like who is the administrator,contact number,mail id, etc)
Can anyone show me how to do this and also i want to know what is sm02 is used for?
Regards
FriendYou can do this by creating a message at the logon screen
Read SAP Note 205487
SM02 is used to send system messages like prior a system downtime or a scheduled maintainance, etc.
regards
Juan -
How to create multipart message manually in wcf consumptions
Hi,
My purpose is to consume simple wcf service through biztalk and I am also able to do this for doing this i have following steps
step 1) add -->generated itmes -->consume wcf service
through this wizard i got one .odx file two binding xml files and some schemas
step 2) in oxd file i created 3 messages
1-msgIn which is a simple type of mesage which is accepting input from our request schema
2-msgWcfReq- by this message we are sending a request to wcf (but when we are selecting the messagetype for this message we are selecting it form "multipart message type node" inside this node there are some automatically generated schemas when
we used wcf wizard)
3-similarly for response message also we are selecting messagetype from "multipart message type node".
and rest of the mapping we are doing and we deployed the solution and we importing the binding file which was genrated by wcf wizrad.
so it automatically fill everything for WCF port like pipeline/wcf url/soap action header
Now My question is if i am deleteing the automatically generated odx file then we don't have those aotogenrated port and schemas which are comming under "multipart message type node"
so now how we can achieve the same thing means now i am trying to create same 3 type of message which i discussed above,because if i am trying to create multipart message manually then we don't have any schema type of things inside "multipart message
type node".
if this problem is resolved the everything will work for me because in administration console still i want the same "bindinginformation.xml " file for wcf port bindings.
Please help me
Thx
ManojHi Manoj,
You should not delete the auto generated orchestration even do not modify it, as it is stated in msdn.
The BizTalk WCF Service Consuming Wizard creates in your BizTalk project the BizTalk schemas and types necessary to consume WCF services. The BizTalk types such as port types and multipart message types are created in an orchestration. We recommend
that you do not modify the orchestration that the wizard creates. Instead, you can add new orchestrations in the BizTalk project for your purposes.
--------- MSDN
For Refernce
In your solution, if you are seperating your schemas project from orchestration project, in that case i personally advise to generate wcf endpoint in your schema project and after adding schema reference in orchestration
project you manually create the multipart message and a request response port as it will not display in existing port.
Regards -
How to create a message box when click on Panel
Dear All
I would like to create a message box to show my data when I
click or mouseOn the panel that generate automatically from
arrayCollection and the Data that I would like to show in the
message box is in that arrayCollection too.
If you know how can I do for this thing Could please tell
me!!
this is my CODE for generate a list of panel BY
arrayCollection
<mx:List id="pa4" width="99" height="293"
dataProvider="{sectorTemp1}">
<mx:itemRenderer>
<mx:Component>
<mx:Panel width="100" height="30" title="{data.company}"
backgroundColor="{data.indicatorColor}" />
</mx:Component>
</mx:itemRenderer>
</mx:List>Sometimes the drivers do not give all the true functionality of the instrument. I am assuming this pop up is possible, so if the driver doesn't offer the functionality you might have to go to the instruments full instruction set and find the right commands and make a driver for that command.
For example, the driver for the small display might be 'upgradable' to give the pop up you are looking for.
I saw some other posts ( as far back as 2007) on this instrument, so maybe there is already somthing like this on the board.
Mark Ramsdale -
How to Create OSS Message to SAP??
Hi Experts,
I need to create OSS Message to SAP? could you please provide the related info??Hi,
You need to go to link https://websmp202.sap-ag.de/support. Here you need to enter credentials without which you cannot proceed further. And after entering to this site, you need to create OSS notes according to it's Priority.
BR,
SG. -
How to Create Support Message with no SolMan User
Hi all,
I would like to test if it is possible to create a support message from ECC system, if the same user do not have a SolMan user.
Now, in few other threads, like
Creation of support message in SolMan without having user id in SolMan
Re: Do End User Require Login in Solman to raise Support Messages !!
show to the user there support message list
e.t.c.
it is clearly stated: it is possible.
I have done the next steps:
In ECC:
- created a test user
- assighned him a "sap_all" profile (and "Z_SAP_SV_FDB_NOTIF_BC_CREATE" role) + user comparasion
- assighned him a "Z_SAP_S_RFCACL" role + user comparasion
In Solman:
- No user created
- In TX DNO_CUST04 the Field Name "NO_USER_CHECK" is maintained with the value "X".
- In tx BP business partner is created as a general BP, with valid external SYS ID no (other users with both ECC and SM user are OK), and changed to "employee" with ECC username defined.
Now, the problem is when I try to create a support message as a test user in ECC, I get an error:
"Error in Local Message System: No authorization to logon as trusted system (Trust Message was Not Created"
All I could find is the tread:
solution maanger issue
and this one is basicly different:
the mentioned user has both ECC and SM user.
And one of the answers was the user must have S_RFCACL roles in BOTH ECC ans SM systems...
In ST22 (in solman) I get error description:
" An RFC call (Remote Function Call) was sent with the invalid user ID
"TEST_T01230 "
. Or the calling system is not registered as trusted system in the
target system."
Now, the calling system IS regged as a trusted sys (as I mantioned - other users with both ECC and SM users can send supp. msgs)
So - the only answer is "invalid user ID".
The short message is
" No authorization to logon as trusted system (Trusted RC=0)"
and the trusted return codes ( 0 ) have the following meaning: Invalid logon data (user ID and client) for the trusting system.
So. how can I perform trusted Logon with no user in SM?
Thank you in advance,
cheers
NenadHi again,
thank you for your help.
At first I thought you meant *_back dest. directly in SM, and now I see you ment to use SMSY to go to ECC sys, and maintain the RFC conns on ECC diredtly from SMSY, "clean-up RFC Destinations". Yes, can do
So:
The problem is solved.
I deleted the *_back user from ECC to SM, and re-generated the connection with default system pre-defined user SMB_T01. (it is interesting that SU01 reports - user SMB_T01 does not exist)
I even deleted a SRFCACL role from the test user in ECC, and the user was still able to create the support message (certanly he was, as he uses a *:back rfc with SMB_T01to log on to SM)
So, resume:
To be able to create / send a support message from another system, with no user in SolMan, it is needed:
- a user in other system with roles needed for everyday work, + "Z_SAP_SV_FDB_NOTIF_BC_CREATE" role;
- a not trusted SM_<SID>CLNT<CLNT_NB>_BACK rfc connection from satelite system to SolMan, with defined logon user (with apropriate authorisations) - generated by the system.
- the BCOS_CUST table in ECC system should be onfigured like: OSS_MSG W SM_<SID>CLNT<CLNT_NB>_BACK CUST 620 1.0
- a Business Partner for user in SM with identification number for system from where the massege will be sent from. (the user can send the note with out this condition, but the "created by" field in message will be empty in that case)
Once again thank you,
cheers,
Nenad
Case closed.
Edited by: Nenad nikolic on Mar 23, 2010 10:54 AM
Edited by: Nenad nikolic on Mar 23, 2010 10:57 AM -
How to create large message window in Oracle Applications.
Hi there,
I would like to display a window in Oracle Applications very similar to the window we see when we go to Help-> About Oracle Applications.
Basically I need a window that can display quite a bit of text (hence with a scroll bar) that I can call from custom.pll
I tried using fnd_message.set_string but this cuts off the message if it is too long.
Does anyone know how to do this.
TIA.
Ash.Hi Sandeep.
Thank you so much for the idea...i am trying to do this but have run into a problem when closing the form.
I have created a new form from template.fmb, with one window with just one field to display the message and one 'ok' button (that will close the form).
I am now calling this form from within a trigger in CUSTOM.pll.
Basically, when a user clicks on the quanitity field on a purchase order line, i want this message to pop up depending on the item they have selected.
I have used the 'WHEN-NEW-ITEM-INSTANCE' trigger on the quantity field. Once the conditions validates to true, the message pops up... but when I try to close the form (clicking the OK button), it seems like it pops up again as it returns control back to the quantity field and then the trigger kicks in again?
Any ideas as to how I can resolve this.
Thanks.
Ash.
Maybe you are looking for
-
Jabber connection to Presence server /softphone issue
Hello community, Can i get some help with Cisco Unified Presence (8.6) working with Cisco Jabber for MAC (9.2.1)? So here is the scenario, we are currently moving away from Cisco WebEX, so i needed to configure our Cisco Presence server to be able ha
-
Deploying a J2EE web application in Oracle 10g
Hi friends, <br> I had worked with Oracle9i 9.0.3 . But it's my first experience with Oracle 10g . I have installed Oracle 10g Infrastructure , Metadata Repository and one Middle tier - Forms and i hope i have followed The Oracle 10g installation gui
-
Merging Calendars (on my mac with Mobile me)
I have most of my calendars set up with my Mobile Me account to push to the cloud and to my iphone. I also have some old calendars that are grouped under "On My Mac" and they do not sync. Is there a way I can group the "On My Mac" calenars into the
-
InCar HeadUnits - work with Iphones (ability to play app's from app store)
I am trying to find a head unit which allows you to play iphone applications through your car stereo (Internet radio applications) I have been trying to find more information on ipod compatible in car stereo's however most just state Direct iPod comp
-
Why?