How to create video shapes, as in the templates?

I'm currently trying to find a solution for my scene index-menu. I've placed some drop zones, in these drop zones I want still images - fair enough. But the shape has to be a black/white matte, to make a transition from the motion menu.
The menu is a video, starting from the main menu - and sweeps over to the scene index menu. Then it stops. And here I'd like a custom shape, which should be video, to kick in..
Has anyone a clue how to deal with this ?

Not 100% sure what you mean, but you can make highlight overlays with shapes
http://dvdstepbystep.com/newmap.php
You can also add items to the background (movie) which you can show/hide (sort of)
http://dvdstepbystep.com/rollover.php
Where the shape would be in the background movie itself

Similar Messages

  • How to create a shape based on the shape of an image

    I want to erase a portion of a mask based on the shape of an image. how can i do this? btw how to create a circle? thx

    Both your questions leave room for imagining what you might really mean, but here's a shot at answering them.
    If you have a mask that you want to erase portions of based on an image... assuming the mask is a simple rectangle you drew with the rectangle tool, change the opacity of the rectangle's fill in the color panel to make it see-thru, place the mask over the image, and using the eraser tool, erase the portions of the mask that you do not intend to retain using the image below it as a guide.
    As for drawing a circle, hover over the rectangle tool and a menu should appear.  Select the oval/ellipse tool.  To draw a circle, hold down the shift key and draw just as you did for the rectangle.  The shift key forces it to retain equal width and height.

  • How to create a new folder within the video folder in media

    Hi, I'm trying to figure out how to create a new folder within the video folder in media. I can easily create new folders within the pictures folder but not in videos.....Why??? Thanks in advance for your help.
    Message Edited by dany_s on 06-25-2009 03:58 PM
    Solved!
    Go to Solution.

    Hello,
    I think you can try two things : the soft reboot, and if it does not work, the hard reboot. Don't worry, you can't lose data with these two reboots.
    Soft reboot :
    1) Hit the three following keys at the same time :
    - Alt
    - Right Shift
    - Delete
    2) wait 2 minutes for the Blackberry to wake up.
    Hard reboot :
    1) your Blackberry device is on
    2) remove the battery and wait for a minute
    3) Put the battery back
    4) wait 5 minutes for the device to wake up.
    Please tell us if it works for you.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • How to create an intro similar to the Mary Tyler Moore Show

    Hi Everyone,
       This is literally my first attempt at working with After Effects. I was wondering how to create an intro similar to the text animation found in this Mary Tyler Moore Show intro video: http://www.youtube.com/watch?v=Z1GC6yXZ4e4
       I have been able to create a similar effect where the text is a yellow/green with the blue background, but I was wondering how to multiply the text as it appears in that youtube video and how it seemlessly spreads out of the center text. I've searched for youtube tutorials but haven't had any luck. Since I am unfamiliar with all of the terminology of after effects I felt perhaps I wasn't searching for the right term. I did look at the preset text animations but there weren't any that demonstrated what I had in mind. I need to figure this out soon because I'm putting together a video that needs to be completed in a few weeks.
    Thanks in advanced for any advice you could share.

    Three text layers animated in 3D space, then a bunch of duplicates of the text with animated position. It's just layer order and a little work, not a plug-in. Drop that comp in another and use the text pre-comp as a track matte to reveal the video below. These are AE basic skills. Please go through the getting started materials or search Adobe TV for getting started with After Effects.

  • How to create a record based on the name of a file in the file-system?

    Hi,
    With a lot of pictures I want to have a database to gather some information about these pictures.
    First question is how to generate a record based on a file in the file system?
    e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
    now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
    any suggestions?
    any reaction will be appreciated.
    Leo

    Link to Create directory
    http://www.adp-gmbh.ch/ora/sql/create_directory.html
    You can create a list of files in the directory and read the list files from that directory.
    [UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
    [Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
    SS

  • How to create multi garnishment order for the same garnishment document

    Hi,
    Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
    Thanks a lot in advance.

    hi,
    As far as I got it.
    You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
    For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
    Since like order you cannot maintain adjustment also directly.
    Regards,
    Amit
    Reward all helpful replies.

  • How to create a generalized version of the detailed polygons?

    How to create a generalized version of the detailed polygons?
    I have a table of detailed polygons (100+ vertices) and I want to get generalized version of these polygons.
    For example, assume I have a polygon with 100 vertices. Distance between vertex n and n+1 is 1.0.
    I want to get geometry (generalized polygon, line or point) where distance between vertex n and n+1 is 10.0 or more (I want vertices to be considered as one vertex if distance between them is less then 10.0).
    Is it possible to create generalized version of polygons on the fly?
    Any help is appreciated.
    Thanks.

    Scenario A:
    If all of your polygons have no interaction among them (No polygon shares any boundary with any other ones).
    In this case you can use the sdo_util.simplify in 10g to reduce the vertices in your polygons which returns new polygon geometries on the fly.
    If you found that simplify is not doing exactly what you want, you can always roll out your own implementation using PL/SQL or the new SDOAPI JGeoemtry class in Java. Both will give you complete access to the coordinate arrays in a polygon and update them back to the database after you have simplified them in your code.
    Scenario B:
    If your polygons share boundaries, then the above methods will not work since the simplification process may not preserve the topology among your polygons. What you can do then is to use the Java topo package to create a new topology by adding all of your polygons to to an empty topology (which you first create in the database and then load into memory using oracle.spatial.topo.TopoMap). Once you have a topology built in the memory, you can use methods such as oracle.spatial.topo.TopoMap.changeEdgeCoords() to simplify the edges of your polygons. You can then recreate the simplified polygons from the topology. This is just a rough guide; for more details you need to check out the java doc for the various packages mentioned above which are shipped with 10g spatial.

  • How to create a temp table in the memory, not in disk?

    in sql server, you can create a temp table in the memory instead of disk,
    then you can do the insert, delete,update and select on it.
    after finishing, just release it.
    in Oracle,
    I am wonderfing how to create a temp table in the memory, not in disk?
    thanks,

    Thanks for rectifying me Howard.
    I just read your full article on this too and its very well explained here:
    http://www.dizwell.com/prod/node/357
    Few lines from your article
    It is true, of course, that since Version 8.0 Oracle has provided the ability to create a Keep Pool in the Buffer Cache, which certainly sounds like it can do the job... especially since that word 'keep' is used again. But a keep pool is merely a segregated part of the buffer cache, into which you direct blocks from particular tables (by creating them, or altering them, with the BUFFER POOL KEEP clause). So you can tuck the blocks from such tables out of the way, into their own part of the buffer cache... but that is not the same thing as guaranteeing they'll stay there. If you over-populate the Keep Pool, then its LRU mechanism will kick in and age its contents out just as efficiently as an unsegregated buffer cache would.
    Functionally, therefore, there can be no guarantees. The best you can do is create a sufficiently large Keep Pool, and then choose the tables that will use it with care such that they don’t swamp themselves, and start causing each other to age out back to disk.
    Thanks and Regards

  • How to create a snapshot report on the specific destination?

    dear all
    How to create a snapshot report on the specific destination?
    thanks
    john

    user8779435 wrote:
    dear all
    How to create a snapshot report on the specific destination?
    thanks
    john
    Hi,
    when prompted just input the full path with filename for example
    Enter value for report_name: /tmp/awrreport.htmlHope this helps
    Cheers

  • I have Pages 09 and I have  created a business card using the template but can't figure out how to duplicate it to the other 9 on the page Am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

    I have Pages 09 and I have  created a business card using the template but can't figure out how to duplicate it to the other 9 spaces on the page. I am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

    I do the following: Hold down the command key and highlight all the items to be reproduced. Then hold down option and drag the items from the first to each subsequent card.

  • How to create  some columns dynamically in the report designer depending upon the input selection

    Post Author: ekta
    CA Forum: Crystal Reports
    how  to create  some columns dynamically in the report designer depending upon the input selection 
    how  export  this dynamic  report in (pdf , xls,doc and rtf format)
    report format is as below:
    Element Codes
    1
    16
    14
    11
    19
    10
    2
    3
    Employee nos.
    Employee Name
    Normal
    RDO
    WC
    Breveavement
    LWOP
    Sick
    Carers leave
    AL
    O/T 1.5
    O/T 2.0
    Total Hours
    000004
    PHAN , Hanh Huynh
    68.40
    7.60
    76.00
    000010
    I , Jungue
    68.40
    7.60
    2.00
    5.00
    76.00
    000022
    GARFINKEL , Hersch
    66.30
    7.60
    2.10
    76.00
    In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
    if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
    Can anybody help me how do I design such report....
    Thanks

    Hi Developer life,
    According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
    As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric  values) in the details,  add  an filter to filter the data base on this column group, but if
    the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
    If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
    Similar threads with details steps for your reference:
    https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings 
    If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
    Any question, please feel free to let me know.
    Best Regards
    Vicky Liu

  • How to create a different sid in the same  system

    Hi Experts
    In one system already i have installed HP Quality center with Oracle, Now i want to install SAP on the same system. Please help me how to create a different SID on the same system.
    Thanks in advance

    Hi,
    If you are talking about host...then when you will start installation of new system it ask for SID then choose different SID...
    Thanks
    Sunny

  • How to get the spool id or how to create a spool id for the report .

    hi,
    how to get the spool id or how to create a spool id for the report .
    this spool id i have to use it in CONVERT_ABAPSPOOLJOB_2_PDF fm to get the pdf download file.
    my requirement is to download a pdf file from the alv grid list.

    Hi Raghu,
    Execute this program.
    REPORT  ZTEST_3318                              .
    tables: usr01.
    perform send_report_to_spool.
    *&      Form  send_report_to_spool
          text
    form send_report_to_spool.
      data: loc_dest like pri_params-pdest,
            wf_listname type char12,
            wf_listtext like PRI_PARAMS-PRTXT,
            wf_copies type i,
            wf_days type i,
            wf_PARAMS LIKE PRI_PARAMS,     " achieving file PRI_PARAMS.
            wf_valid type c.
      clear : wf_listname , loc_dest , wf_listtext .
      move: 'AP interface' to   wf_listname .
      move: 'AP interface' to   wf_listtext .
    select single spld into usr01-spld from usr01 where bname eq sy-uname .
      if sy-subrc eq 0 .
        move: usr01-spld to loc_dest .
      endif .
      call function 'GET_PRINT_PARAMETERS'
        EXPORTING
          destination    = loc_dest
          copies         = 1
          list_name      = wf_listname
          list_text      = wf_listtext
          immediately    = ' '
          release        = ' '
          new_list_id    = 'X'
          expiration     = 1
          line_size      = 200
          line_count     = 65
          layout         = 'X_65_200'
          sap_cover_page = 'X'
          receiver       = 'SAP*'
          department     = ''
          no_dialog      = 'X'
        IMPORTING
          out_parameters = wf_params
          valid          = wf_valid.
      if wf_valid <> space.
        new-page print on parameters wf_params no dialog.
        perform write_summary .
        new-page print off.
      endif .
    endform.                    "send_report_to_spool
    *&      Form  write_summary
          text
    -->  p1        text
    <--  p2        text
    FORM write_summary .
    data: begin of itab occurs 0,
          matnr type matnr,
          end of itab.
    select matnr
           from mara
           into table itab
           up to 10 rows.
    loop at itab.
    write: / itab-matnr.
    endloop.
    ENDFORM.                    " write_summary
    This will create spool in SP01.What data you want to put in Spool write it in form write_summary.I have done coding for testing purpose
    After that use that spool for your purpose.
    If Useful award point

  • How to create an install cd with the final cut pro x app if the app comes from App.Store?

    How to create an install cd with the final cut pro x app if the app comes from App.Store?

    Just copy the Application FCPX to your CD. When you want to install drag the FCPX to the Application folder and you are done.

  • How to create a purchase requisition from the EP

    1. How to create a purchase requisition from the EP & What are the pre-requiste?

    Hi,
    You need to create a SAP transaction iview for purchase requisition transaction and link it to the role and to the user to view purchase requisition transaction.
    First you need to create a system in portal to link to the R/3 system. For creating system check this link.
    http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
    For linking portal with R/3 and view the Purchase requisition check this link
    Configuring EP for connecting to SAP R/3
    Regards
    Arun

Maybe you are looking for