How to create virtual cube cube in bi-7

how to create virtual cube cube in bi-7

Hi,
VirtualProviders
InfoProvider with transaction data that is not stored in the object itself, but which is read directly for analysis and reporting purposes. The relevant data can be from the BI system or from other SAP or non-SAP systems.
VirtualProviders only allow read access to data.
Various VirtualProviders are available. You use these in different scenarios.
For more information, see:
●      VirtualProvider Based on the Data Transfer Process
http://help.sap.com/saphelp_nw04s/helpdata/en/da/5909392a430303e10000000a114084/content.htm
●      VirtualProvider with BAPI
http://help.sap.com/saphelp_nw04s/helpdata/en/26/39dc37bff7a66de10000009b38f889/content.htm
●      VirtualProvider with Function Modules
http://help.sap.com/saphelp_nw04s/helpdata/en/62/d2e26b696b11d5b2f50050da4c74dc/content.htm
●      Using InfoObjects as VirtualProviderss
http://help.sap.com/saphelp_nw04s/helpdata/en/45/13baccabbe5d78e10000000a11466f/content.htm
Note that the system does not run existing exits or customer and application extensions (customer exit, BTE, BAdI) for direct access to the source system.
http://help.sap.com/saphelp_nw04s/helpdata/en/23/c0234239f75733e10000000a155106/frameset.htm
Thanks,
JituK

Similar Messages

How to create a cube/ods/infoobjects etc..and also why to create the same

Dear Friends
how to create a cube/ods/infoobjects etc..and also why to create the same objects.
thanks & Regards
Ramana

Hi Friend,
Creating Infoobjects
1. Go to RSA1 -> Modelling tab.
2. Click on Infobjects.
3. Create a new Infoarea.
4. Now create Infoobject Catalog for Characterstics and Key Figures.
5. Now create Char Infoobject under Char Catalog and Key figure Infoobject under Key Figure catalog.
Creating Cubes:
1. Right click the info area and choose create info cube.
2. Select the type of cube you wish to create and comnfirm your selections.
3. The next screen is where you actually define the cube.
4. Now you will notice the difference.
5. Place your cursur on key fig and right click and chose infio object direct input; chose your key fig for the cube.
6. Similarly for the dimension; right click the dimension and chose inbfo object direct input, chose your chars and out them in dimension.
7. Activate the cube.
Creating a ODS is also the same.(in step 1 choose create ODS)
Creating Multicube/Multiprovider
1. Right click the info area - chose create multi provider.
2. select the cubes , DSOs, info objects that you need for the multi provider.
3. On the right side of the screen, you will see all the objects that you selected and open the key fig and dimension and drag the ones you need to define the multi provider.
4. Identify the chars and key figs.
5. Acvitate the mullti provider.
Why we create them ?
Infobjects : They are fields in R/3. As we require fields in R/3 tables we require infoobjects in BI.
ODS : This actually is like a table in R/3.
Cube : This contain the Key figures.(e.g Sales quantity, Amount etc)
Hope it helps.
Regards
Hemant Khemani

How to create a "cube" that rotates images

hello Flash,
I have seen some web sites that have a "cube" that has images
displayed on the face of the cube. And it rotates -
most of the ones I have seen rotate continuously. I would
like to create a cube, that when I click a buttion (web browser
button) it gives the appearance of rotation and changes the image.
How can I do this in flash???
thanks
eholz1

I'm not exactly sure what you want to do. Sorry if I get this wrong.
You have two fact tables, one with data values at the day, month and year levels and a second fact table with data values at just the month and year levels. If this is the case, in the CWM2 APIs or OWB Paris, you would create a view that joins the two tables together and then map this view to the ROLAP cube.
For CWM2 details, please refer to the Oracle OLAP Reference.

How to Create a Cube Based on other Cubes?

I want to create a cube that is sourced from other cubes. My situation is I have a number of cubes based on individual products and I want to create a cross-product cube that combines the individual product cubes at a common dimensional grain.
e.g :
CUBE_1 (DIM_1, DIM_2, DIM_3)
CUBE_2 (DIM_1, DIM_2, DIM_3, DIM_4)
CUBE_3 (DIM_1, DIM_2, DIM_3, DIM_4, DIM_5)
CROSS_CUBE (DIM_1, DIM_2, DIM_3)
I see if your cubes are in the same AW then you can access measures from other cubes with a calculated measure. But I'm struggling to understand two things:
1. If I want to build a cube that is only sourced from other cubes and not any database tables then what do I put in the cube mapping?
2. If I create a calculated measure that accesses another cube's measure does Oracle OLAP automatically match up the dimensionality? e.g. If I create a calculated measure in CROSS_CUBE that adds together a measure from CUBE_1 and a measure from CUBE_2 then will the new measure return the correct results across DIM_1, DIM_2 and DIM_3?
To do this in a relational star schema you have to do a Drill-Across: http://www.kimballgroup.com/2005/06/design-tip-68-simple-drill-across-in-sql/
Is what I'm trying to do possible or will I need to combine the cube views into another view and use this as my cross cube source?
Thanks in advance.
OLAP Analytic Workspace 11.2.0.4.0
Oracle OLAP API 11.2.0.4.0
OLAP Catalog 11.2.0.4.0

You can create a cube in AWM which consists only of calculated measures. These calculated measures can reference other cubes provided that
1) the cubes are in the same Analytic workspace as the calculated measure cube and
2) the calculated measure cube is dimensioned by the same dimensions as all the cube measures it references in its calculated measures.
For instance, if your calculated cube is dimensioned by dim1, dim2, dim3 and dim4, it can have calculated measures which refer to measures in cubes that are dimensioned by any subset of the dimensions (i.e. dim1 and dim3, or dim1, dim2, dim3 and dim4, etc).
The calculated measure cube does not need to be mapped because it only contains calculated measures that reference measures in other cubes which I am assuming are mapped and built.
--Ken

How to create ssas cube by using MySQL Database

please tell me step by step process to create ssas cube by using MySQL database in my system, i have Sqlserver 2008 enterprise edition and MySql5.0

There is an OLEDB provider for MySQL which you can get from here
https://cherrycitysoftware.com/ccs/Providers/ProvMySQL.aspx otherwise you can also use SSIS to push the data straight into the Analysis Services database without needing to stage it in SQL Server. Also, as you can load data into AS using XMLA you could
also write your own loader to extract data using ODBC and push it into AS using XMLA, essentially what I suspect SSIS does. However those latter solutions don't allow you to create a database on top of MySQL because you need an OLEDB (or .net) provider for
that.
In the simplest case, install the OLEDB provider and then in AS create a Data Source connection using that provider. Once you have done that you should be able to create a Data Source View using that connection enabling you to import the schema definitions
for the tables/views in the MySQL database. From there you build dimensions and cubes etc. about which there is plenty of information on the web.
http://bi-logger.blogspot.com/

How to create Virtual InfoProvider with Services - Virtual Characteristic

Hi all,
I need to create a virtual infoprovider that also fills a virtual characteristic in order to display custom characteristics and calculated values based on user selection.
Basicaly what I want to do is send a variable in a virtual characteristic equal to the values I want to fill in the characteristic. So for instance if my base cube contains the infoobjects Brand, Product Line, Region and Country I want a have a new infoobject that has no data, but fills itself with the vales of the infoobject I specify at query time on the virtual cube.
The reason for this is I am trying to create a WAD using the delta chart (waterfall graph) that will show the difference between the plan and actual totals for a specific characteristic in Profitibility analysis.
I have a document that explains the situation. Send me your mail address and I will send you the document.
Kind Regards

We found a way to build the structure for this.
Regards

How to Create Virtual Tape Library for RHEL 5.4

Hi,
We are planning to use a tape library (well, as our team proposed) so we are trying to create a Virtual Tape Library as a proof of concept on this project. Can you help us create virtual tape libraries using raw devices.
We will be using Virtual Box as our virtualization environment which will run RHEL 5.4. Will this be possible?
Thanks and hope you can give us some ideas.

I tried the exact same setup and it is possible. What you will need is mhvtl and Oracle OSB to get a Oracle Media Management Library (MML).
Please see Integration of RMAN with virtual tape library
The link above should provide the setup info you will need. There were some initial problems, but according to follow up posts later versions of the products seem to have fixed the issues with tape handling.

How to create virtual directories on WLS 5.1

Hello, I'm new using BEA WLS, and I've already read all articles on this forum
about how to get virtual directories, but I cannot achieve this, please, would
anyone be so kind to tell me how may I do this?, or to be so kind to tell me where
may I get related and useful information to accomplish this task, please?
I sincerely appreciate your attention and time on this matter, thanks,
Miguel Angel Avila Vqz

I sincerely appreciate your help Mr. Scott, I'll review all the documentation you
refers,
Thank you so much again!
I hope I can help you someday too,
Best regards,
"Wayne W. Scott" <[email protected]> wrote:
>
>
Miguel Angel Avila Vazquez wrote:
Hello, I'm new using BEA WLS, and I've already read all articles onthis forum
about how to get virtual directories, but I cannot achieve this, please,would
anyone be so kind to tell me how may I do this?, or to be so kind totell me where
may I get related and useful information to accomplish this task, please?
I sincerely appreciate your attention and time on this matter, thanks,
Miguel Angel Avila VqzHi Miguel:
I was working on a case this afternoon related to the "FileServlet."
Several articles I
found which discuss this. I have them open on my desktop at the office,
but I am home
now. Try going to the AskBEA part of support -- http://support.bea.com/application
and make sure the "Products" says BEA WebLogic Server. In the search
box, I entered
"fileservlet virtual directory configure" and after hitting Enter, got
plenty of
articles to read.
You can also search the documentation for 'fileservlet'
http://www.weblogic.com/docs51/resources.html
http://search.bea.com/weblogic/go50/
http://www.weblogic.com/docs51/classdocs/API_servlet.html
Do you have any service packs installed? You will probably need them.
Thank you,
Wayne Scott
BEA Support
Liberty Corner, NJ

How to create olap cube using Named Query Table in Data source View

I Create on OLAP Cube using Existing Tables Its Working Fine But When i Use Named Query Table with RelationShip To other Named query Table It Not Working .So give me some deep Clarification On Olap Cube for Better Understanding
Thanks

Hi Pawan,
What do you mean "It Not Working"？ As Kamath said, please post the detail error message, so that we can make further analysis.
In the Data Source View of a CUBE, we can define a named query. In a named query, you can specify an SQL expression to select rows and columns returned from one or more tables in one or more data sources. A named query is like any other table in a data source
view (DSV) with rows and relationships, except that the named query is based on an expression.
Reference:Define Named Queries in a Data Source View (Analysis Services)
Regards,
Charlie Liao
TechNet Community Support

How to create virtual system

Hi all,
i am fresher i wish to check with client export and i am having access to only one sap system.
how can i create the virtual system for the purpose of testing of client export?
thanks,
Dinesh.

Hi Dinesh,
Go to domain controller. Then go to STMS transaction.Then from menu bar choose Overview-->Systems.
In the next screen in menu bar choose SAP systemCreate-Virtual system.
Give the virtual sytem name and description. Save the changes. Keep the communication system same.
Then adjust the transport routes in STMS accordingly.
Regards.
Ruchit.

Problem with Lightroom 5: how to connect the app with my original pictures which are on a external hard disk and, once this resolved, how to create virtual pictures

A friend has installed Lightroom 5 on my MacBook air. he transferred all my picture that were on my IPhone an on Iphoto on Lightroom but without making virtual copies systematically. He put the original (real?) pictures on a external hard disk under Data_photos folder to allow more memory space on my Mac book Air. My problem now that when I connect the external hard disk with my computer the connexion does not happen automatically. it is like if Lightromm does not recognize the path to get connected to the original/real picture and therefore I cannot see pictures with all their potential and I cannot work on these. I am stuck! What should I do to 1) create this link? 2) create then virtual copies in order to be able to work on my computer without been obliged to connect my external hard disk to be able to use the application Lightroom. The friend who helped me disappeared! He is not in Japan and unable to help me.I hope you can help me. I have been looking for support to apple stores, photo shops, computer specialists but I have not found the expert capable to help me. I am leaving in Geneva. And believe that I should have some one with me physically to resolve a problem which I believe is not a serious one if one knows lghtroom an dinformatic basics... thank in advance to come back to me asap !!!!

Follow these instructions: Adobe Lightroom - Find moved or missing files and folders

OT: How to create virtual site

Hi there,
I need to setup a virtual host for PHP (which is installed as
http://localhost and works) on my Win
XP SP2 machine.
I need it to test some files of my web site which are root
relative.
Pictures that are site relative do not show because is points
to
http://localhost/images/my_image.jpg
in stead of
http://localhost/mysite/images/my_image.jpg
I trust you can help me doing this.
Regards,
Deon

Deon wrote:
> I need to setup a virtual host for PHP
A Google search for "setting up virtual host Apache Windows"
brings up
this excellent tutorial from Gary White:
http://www.apptools.com/phptools/virtualhost.php
There are also full instructions for how to do it on both
Windows and
Mac OS X in my book, "Foundation PHP for Dreamweaver 8".
David Powers
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "Foundation PHP 5 for Flash" (friends of ED)
http://foundationphp.com/

How to create virtual directory in Oracke 10g ias

Hi
In my application i have a upload functionality so that any user once they upload the document i want to store in a directory which is existing on the server so that if anybody wants to open that document it should be opened from the server.
any help is highly appreciable

You don't say whether you are using OC4J standalone or OracleAS:
Here's how you do it with OC4J standalone:
http://buttso.blogspot.com/search?q=virtual-directory
I you are using OracleAS then you'd use one of the standard Apache directives to expose the directory via it (Oracle HTTP Server):
See: http://httpd.apache.org/docs/1.3/urlmapping.html#outside
-steve-

How to creat virtual wifi mini adaptor.

In commond prompt when write & enter the "netsh wan..." commond prompt does nothing for the same.

If what you want to achieve is to create a shared internet connection, then you can simply use the GUI provided in Windows 7.
Please refer to this link
Set up a shared Internet connection using ICS (Internet Connection Sharing)
http://windows.microsoft.com/en-in/windows/using-internet-connection-sharing#1TC=windows-7
If you want to use the command prompt
Please make sure to follow instructions in this link
How to Configure WiFi Hotspot in Windows 7 Using Command Prompt
http://www.durofy.com/how-to-configure-wifi-hotspot-in-windows-7-using-command-prompt/
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

How to create virtual directory in apache

Hi,
Im using oas9i on windows platform. I would like to share image files(folder named 'gambar') from different windows server. I had mapped network drive and configured 'alias' in apache(httpd.conf), but didnt work. Could you verify whether 'alias' method is correct or not OR is there anyway to make my webserver able to share/load image with diffrent server.
Alias /gambar/ "h:/gambar/"
<directory>
Option Indexes FollowSymLinks Multiviews
AllowOverride all
Order allow, deny
Allow from all
</directory>
Thank you.

Try:
Alias /gambar "h:\gambar\"
<directory "h:\gambar">
Option Indexes FollowSymLinks Multiviews ExecCGI
AllowOverride all
Order allow, deny
Allow from all
</directory>

How to create virtual cube cube in bi-7

Similar Messages

Maybe you are looking for