How to create VPN through tunnel

how to create vpn through tunnel
Navaz

can you be a little bit more specific what you wnat to achieve?
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Similar Messages

How to create po through batch run

Hi,
how to create po through batch run (through background job)
Prashanth

Hi Prashanth ,
Run the below program as a background job.
Make sure that inforecord exists for all and automatic PO are ticked in Vendor and Material Master.
Program : RM06BB30
Create a suitable variant.
Job Creation : Tcode : SM36
Regards
Ramesh Ch

How to create Spool through ABAP program

How to create spool request for Smartforms through program. So I can go in TCODE SP01 and see the output of my smartforms.

Include the below code in ur program .......
DATA: PRINT_PARAMETERS TYPE PRI_PARAMS,
VALID_FLAG TYPE C LENGTH 1.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
IMMEDIATELY = 'X' "C_IMMEDIATELY
*LAYOUT = 'Z_48_144'
*LINE_COUNT = '48'
LINE_SIZE = '255'
*NEW_LIST_ID = C_NEW_LIST_ID
NO_DIALOG = 'X'
RELEASE = 'X'
IMPORTING
OUT_PARAMETERS = PRINT_PARAMETERS
VALID = VALID_FLAG
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4 .
G_PDEST = PRINT_PARAMETERS-PDEST.
NEW-PAGE PRINT ON PARAMETERS PRINT_PARAMETERS
NO DIALOG.
List of write statements to be output.......
NEW-PAGE PRINT OFF.
Reward if useful..............

How to create folders through PL/SQL - Urgent Please

Hi,
We are using Oracle 9i on Windows NT. Is there any way to create a folder in a specified directory through PL/SQL?
Thank you.

Well,
You can and you can't. I don't know how to do that through existing PL/SQL utilities. But, you can create your own utility using java, and wrapping it so you can call it from PL/SQL.
An example of calling Operating System commands can be found in this zip file
http://www.ckamco.com/Execute_Command.zip
Please let me know if this helps at all.
Thanks
TwoPigs

How to create ringtones through itunes on mac computer?

Okay so,
I've made ringtones before but it's been awhile and I know there used to be an option once you purchased the song that from there you could create a ringtone on your computer through itunes and pay 99c for it or whatever but I can't for the life of me find any option on how to create a ringtone. I've searched throughout itunes and looked through the FAQ and support and NOTHING talks about it except for on the iphone there is a section for ringtones but the selection seems extremely limited. Someone please help?

Type "create iphone ringtone in itunes" into the google search bar.
There are several ways to make ringtones.
I prefer garageband.

How to create PO through BAPI from custom screen

Hi SAP Technical Guru,
i am new to module pool programming.
i designed custom screen which is like TA me21n means it has one tabstrip and tablecontrol.
for header details(fields) at tab strip, and item detials(fields) at table control i used.
now i have to capture screen fields into FM bapi_po_create1 and update the database tables.
please suggest me how to create Purchase Order through BAPI FM.
regards,

here is the sample code
*tables for passing podata to bapi
DATA : gt_header   TYPE STANDARD TABLE OF bapimepoheader,
       gt_headerx TYPE STANDARD TABLE OF bapimepoheaderx,
       gt_item     TYPE STANDARD TABLE OF bapimepoitem,
       gt_itemx    TYPE STANDARD TABLE OF bapimepoitemx,
       gt_account TYPE STANDARD TABLE OF bapimepoaccount,
       gt_accountx TYPE STANDARD TABLE OF bapimepoaccountx,
*tables used for passing custom field data to bapi
       gt_custom   TYPE STANDARD TABLE OF bapiparex,
       gt_custdata_in TYPE STANDARD TABLE OF bapi_te_mepoaccounting,
       gt_custdata_ix TYPE STANDARD TABLE OF bapi_te_mepoaccountingx,
*tables used for cathing messages returned by bapi
       gt_return   TYPE STANDARD TABLE OF bapiret2,
       gt_return1   TYPE STANDARD TABLE OF bapiret2,
*Work area declaration for passing custom field data to bapi
       w_custom   LIKE LINE OF gt_custom,
       w_custdata_in LIKE LINE OF gt_custdata_in,
       w_custdata_ix LIKE LINE OF gt_custdata_ix,
*Work area declaration for passing podata to bapi
       w_header   LIKE LINE OF gt_header,
       w_headerx LIKE LINE OF gt_headerx,
       w_item     LIKE LINE OF gt_item,
       w_itemx    LIKE LINE OF gt_itemx,
       w_account LIKE LINE OF gt_account,
       w_accountx LIKE LINE OF gt_accountx,
*work area declaration for cathing messages returned by bapi
       w_return   LIKE LINE OF gt_return,
       w_return1 LIKE LINE OF gt_return1.
*populating po dat into internal tables
w_header-comp_code = 'PH02'.
w_header-doc_type   = 'TEST'.
w_header-vendor     = '0000600019'.
w_header-purch_org = 'PH02'.
w_header-pur_group = '901'.
w_headerx-comp_code = 'X'.
w_headerx-doc_type   = 'X'.
w_headerx-vendor     = 'X'.
w_headerx-purch_org = 'X'.
w_headerx-pur_group = 'X'.
w_item-po_item      = '00001'.
w_item-short_text   = 'test po'.
w_item-po_unit      = 'CM'.
w_item-matl_group   = '01'.
w_item-po_unit      = 'EA'.
w_item-plant        = 'PH02'.
w_item-quantity     = '1.000'.
w_item-net_price    = '10.00'.
w_item-item_cat     = '0'.
w_item-acctasscat   = 'K'.
APPEND w_item TO gt_item.
w_itemx-po_item    = '00001'.
w_itemx-short_text = 'X'.
w_itemx-matl_group = 'X'.
w_itemx-po_unit    = 'X'.
w_itemx-plant      = 'X'.
w_itemx-stge_loc   = 'X'.
w_itemx-quantity   = 'X'.
w_itemx-tax_code   = 'X'.
w_itemx-net_price = 'X'.
w_itemx-item_cat   = 'X'.
w_itemx-acctasscat = 'X'.
APPEND w_itemx TO gt_itemx.
w_account-po_item    = '00001'.
w_account-serial_no = '01'.
w_account-quantity   = '1.000'.
w_account-gl_account = '0000199999'.
w_account-costcenter = '0000400011'.
APPEND w_account TO gt_account.
w_accountx-po_item    = '00001'.
w_accountx-serial_no = '01'.
w_accountx-quantity   = 'X'.
w_accountx-gl_account = 'X'.
w_accountx-costcenter = 'X'.
APPEND w_accountx TO gt_accountx.
w_custdata_in-po_item   = '00001'.
w_custdata_in-serial_no = '01'.
w_custdata_in-zzttry    = '1000'.
w_custom-structure = 'BAPI_TE_MEPOACCOUNTING'.
MOVE w_custdata_in TO w_custom-valuepart1.
APPEND w_custom TO gt_custom.
w_custdata_ix-zzttry    = 'X'.
w_custdata_ix-po_item   = '00001'.
w_custdata_ix-serial_no = '01'.
w_custom-structure = 'BAPI_TE_MEPOACCOUNTINGX'.
MOVE w_custdata_ix TO w_custom-valuepart1.
APPEND w_custom TO gt_custom.
*bapi to create po oreders
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
    poheader                     = w_header
    poheaderx                    = w_headerx
TABLES
return                       = gt_return
poitem                       = gt_item
poitemx                      = gt_itemx
poaccount                    = gt_account
poaccountx                   = gt_accountx
extensionin                  = gt_custom.
*bapi for po data commit
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait   = ' '
IMPORTING
    return = w_return1.
*clearing tables & work area
REFRESH:gt_account,gt_item,gt_itemx,gt_accountx.
CLEAR:w_header,w_headerx.
*displaying message returned by bapi
LOOP AT gt_return INTO w_return.
WRITE: w_return-type , w_return-id , w_return-number , w_return-message .
ENDLOOP.

How to create unistaller through B1DE installer wizard

Dear User,
I have developed an add-on through B1DE code generator wizard and installer wizard, it successfully installs in SAP business one but when i want to uninstall it, i have to remove it manually by deleting *.sbo files and deleting it from SARI table and also from business one add-on folder. Is there any way to automatically create its uninstaller through wizard? like i created installer through installer wizard.
Any help is appreciated,
Thanks,
Farhan

Thanks Trinidad,
Problem is almost solved but just to confirm one thing so that i can mark this post as "Solved problem"
In the ard file generation window (found in SAP business one sdk tools > AddOnRegDataGen.exe), i want to confirm the parameter for install and uninstall. the command line argument for install is /z and for uninstall is /x ? am i right??
Your reply is ver much appreciated.
Thanks n regards,
Farhan

How to Create GR through BAPI_GOODSMVT_CREATE - For MB0A T-Code ?

hi,
       I have sap delivery number, i want to create GR based on Delivery number through BAPI only. I found one BAPI   BAPI_GOODSMVT_CREATE, bt i am not able to understand which paratmeters i supposed to pass to this BAPI. Generally i create GR through MB0A.
      Please find out exact soultion for me ASAP.
Thanks,
Saurin Shah

hi,
       I have sap delivery number, i want to create GR based on Delivery number through BAPI only. I found one BAPI   BAPI_GOODSMVT_CREATE, bt i am not able to understand which paratmeters i supposed to pass to this BAPI. Generally i create GR through MB0A.
      Please find out exact soultion for me ASAP.
Thanks,
Saurin Shah

How To Create User through Pl SQL Block

Want to create user from pl sql block using dynamic SQl. Used dbms_sql package . But when I run the block it does not recognises the parameter v7 which is a constant in dbms_sql package. Message displayed is Can not access parameter from package being restricted procedure.
Is there any method to create user through PL SQl block

hi ranjit,
hope this will work
declare
uname varchar2(30):=&uname;
pword varchar2(30):=&pword;
begin
execute immediate ('grant connect, resource to '| |uname| |' identified by '| |pword);
end;
regards

How to create WWWBinaryFileAsset through programming

Hi, Could anybody provide me steps to create WWWBinaryFileAsset through programming.
I followed below steps but i am getting error,
MutableRepository pubRepository = getPublishingRepository();
// pub repository is pointing to /atg/epub/file/SecuredPublishingFileRepository
wwwBinaryFileAsset = pubRepository.createItem(filesProperties.getWwwBinaryFileAssetItemDescriptorName());
     if (wwwBinaryFileAsset != null) {
     wwwBinaryFileAsset.setPropertyValue(filesProperties.getFilenamePropertyName(), imageName);
     wwwBinaryFileAsset.setPropertyValue(filesProperties.getParentFolderPropertyName(), parentFolder);
     wwwBinaryFileAsset.setPropertyValue("content", new File("D:\\media\\images\\hmc\\Penguins.jpg"));
     pubRepository.addItem(wwwBinaryFileAsset);
Thanks,
Raj

Hi,
I am able to create project and adding binary file asset to the project with code as i copy/pasted in this query, after creation, also i am able to see the asset in BCC editor as well.
I can say asset looks like as it was created in BCC editor, means there are nodifferences in assest properties which created through programming from asset created in BCC editor.
I am not sure what i am missing. But only the problem is, i am getting the error when deploying project from BCC, error stack trace is,
/atg/epub/DeploymentServer 14000002:Production:atg.deployment.adapter.DistributedDeploymentAdapter.pollTillDataApplied(DistributedDeploymentAdapter.java:2588) Polling Until Data Appplied
/atg/deployment/DeploymentManager Starting deployment with id: 14000002
/atg/deployment/DeploymentManager Executing deployment in LOCAL mode
/atg/deployment/DeploymentManager item = fileMarker:mark7800001 cause = java.lang.IllegalArgumentException: Negative initial size: -1
/atg/deployment/DeploymentManager at java.io.ByteArrayOutputStream.<init>(ByteArrayOutputStream.java:57)
/atg/deployment/DeploymentManager at atg.deployment.file.FileDeploymentCommandImpl.getUncompressedInputStream(FileDeploymentCommandImpl.java:398)
/atg/deployment/DeploymentManager at atg.deployment.file.FileDeploymentCommandImpl.getInputStream(FileDeploymentCommandImpl.java:470)
/atg/deployment/DeploymentManager at atg.deployment.file.DeploymentProtocolImpl.sendFileDeploymentCommand(DeploymentProtocolImpl.java:913)
/atg/deployment/DeploymentManager at atg.deployment.file.DeploymentProtocolImpl.sendCommand(DeploymentProtocolImpl.java:179)
/atg/deployment/DeploymentManager at atg.deployment.file.FileWorkerThread.runCommand(FileWorkerThread.java:716)
/atg/deployment/DeploymentManager at atg.deployment.file.FileWorkerThread.processMarkerForAddUpdatePhase(FileWorkerThread.java:441)
/atg/deployment/DeploymentManager at atg.deployment.DeploymentWorkerThread.processMarkerPhase(DeploymentWorkerThread.java:521)
/atg/deployment/DeploymentManager at atg.deployment.DeploymentWorkerThread.run(DeploymentWorkerThread.java:300)
/atg/deployment/DeploymentManager message = Deployment Failed time = Wed Jun 20 09:12:50 IST 2012 atg.deployment.DeploymentFailure@93d841 java.lang.IllegalArgumentException: Negative initial size: -1
/atg/deployment/DeploymentManager at java.io.ByteArrayOutputStream.<init>(ByteArrayOutputStream.java:57)
/atg/deployment/DeploymentManager at atg.deployment.file.FileDeploymentCommandImpl.getUncompressedInputStream(FileDeploymentCommandImpl.java:398)
/atg/deployment/DeploymentManager at atg.deployment.file.FileDeploymentCommandImpl.getInputStream(FileDeploymentCommandImpl.java:470)
/atg/deployment/DeploymentManager at atg.deployment.file.DeploymentProtocolImpl.sendFileDeploymentCommand(DeploymentProtocolImpl.java:913)
/atg/deployment/DeploymentManager at atg.deployment.file.DeploymentProtocolImpl.sendCommand(DeploymentProtocolImpl.java:179)
/atg/deployment/DeploymentManager at atg.deployment.file.FileWorkerThread.runCommand(FileWorkerThread.java:716)
/atg/deployment/DeploymentManager at atg.deployment.file.FileWorkerThread.processMarkerForAddUpdatePhase(FileWorkerThread.java:441)
/atg/deployment/DeploymentManager at atg.deployment.DeploymentWorkerThread.processMarkerPhase(DeploymentWorkerThread.java:521)
/atg/deployment/DeploymentManager at atg.deployment.DeploymentWorkerThread.run(DeploymentWorkerThread.java:300)
/atg/deployment/DeploymentManager
/atg/deployment/DeploymentManager Unexpected error occurred. DeploymentWorkerThread terminated prematurely. atg.deployment.DistributedDeploymentException: Exceeded allowable error count (0)
/atg/deployment/DeploymentManager at atg.deployment.DeploymentWorkerThread.processMarkerPhase(DeploymentWorkerThread.java:626)
/atg/deployment/DeploymentManager at atg.deployment.DeploymentWorkerThread.run(DeploymentWorkerThread.java:300)
Thanks.
Edited by: 938890 on Jun 19, 2012 9:09 PM

How to create graph through form9i

dear,
I mant to know how to create graph in form 9i.Right now i have no idea about graphs use in form9i.
please reply me as soon as possible.
my mail id is [email protected]
If you have any answer related to this problem please mail me in my mail id that i have given .
with regards
monika gupta

Hi Monika,
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm
http://www.oracle.com/technology/products/reports/10gr2/Reports_guide_to_changed_functionality.pdf
http://download.oracle.com/docs/html/A90900_01/rwtutorial_graph.htm#1005697
How do I migrate my charts from Oracle Graphics to the new graph format in Oracle Reports 10g?
Since release 9i, Oracle Reports uses Business Intelligence Beans (BI Beans) to create and display graphs in reports. There is no direct migration path from Oracle Graphics to the BI Beans graphing functionality. As such, the user will need to rewrite all of their graphs using the new Graph Wizard within the Oracle Reports Builder 10g. Oracle Reports 10g supports over 50 graph types, including 3D graphs. However, keep in mind that it does not support some special types, such as Gantt charts.
It seems direct graph 6i migration is not possible from reports10g.
It is asking to use the chart wizard again with your query.
Please follow the above two link it may helps u a lot.

How to create cases through IC Webclient

Dear all,
We are implementing Case Management to address customer complaints through Contact Center (IC Webclient)
I need your help to get a basic understanding on Case creation through IC WEB.
How can we assign an Owner and Processor to a Case.
What is the use of maintaing a processor and owner? I could not find any partner function for the processor.
What is Case Hierarchy? why do we use that.
while processing an case in a browser, where the user maintain the solution?
Can I assign an attachment file to a case at the time of creation? If yes, where can I attach?
Though it sounds simple, I could not find any proper documentation. I request you to educate me in the above process to get a good understanding. I would be grateful if you can send me some documentation or links for case management.
Your help and suggestions will be highly appreciated.
Best wishes,
Raghu ram

Hi raghu,
follow the customizing
1.IMG>CRM>Case mgt-->define case types
2.assign the status,text,action int no.range for the case types
3.IMG>CRM>Case mgt>basic settings>determine permitted values for case atributes-->create values for categories, reasons, priorities, authorization
4.add cases and case searchhe nav bar
based on the Account/Business Partner the cases can be searched in the ICWC.
llly cases can be created in the ICWC as well.
ACses should be linked to create a heirarchy if possible
For eg: there can more than one customers calling for a similar complaint (say a traffic signal not working) so if an agent has already creted a case for it can be searched and the new call on hand of the agent can be linked to it (this is heirarchy's importance)
Case owner is the person who creates the case like a construction work is going on at a sight and there are certain complaints received from one specific area this can be mapped via a case wherein the future complaints can be linked to it and analysed.
Case processor is the engineer onsight who works on the case (he also has previous cases which he can see to get details of the issue at hand via case hierarchy)
you can attach transactions ,BPs to a case in the linked objects link of case in the ICWC.
hope this helps
Regards
Raj

How to create pass-through-proxy?

How do I create some kind of pass-through proxy that can listen and receive OCI, and then forward the commands to the oracle database (sometimes where the SQL is slightly altered). What is the best way to do this?
I failed to find any relevant help in the docs. :-(
Thanks in advance!

Anyone? I guess what I'm looking for is how to receive instead of just sending OCI commands, and extract the SQL from the received OCI commands/packages for possible modification/refactoring.

How to create row through VO?

Hai,
I wrote code for creation of Row through ViewObject and i called that method using Mbean. But it is Not at all creating Row. Whether it is right?
ViewObject as=this;
Row r2=getViewObject().createRow();
// Row r2=getCurrentRow();
r2.setAttribute("Sname", Sname);
r2.setAttribute("Sid", sid);
r2.setAttribute("Saddress", Sadd);
r2.setAttribute("Phoneno", Phoneno);
r2.setAttribute("Pincode", Pincode);
r2.setAttribute("Mark", mark);
this.insertRow(r2);
How can i modify code to create Row?

Hi,
I have created the method in ApplicationModuleImpl class
I am using Oracle 10g XE ----- HR Schema ----> LOCATIONS table
I have used the following code :
ViewObjectImpl vo = getLocationsView1();
Row r = vo.createRow();
Integer i = new Integer(4000);
r.setAttribute("LocationId", i);
r.setAttribute("StreetAddress", "Test");
r.setAttribute("PostalCode", "Test");
r.setAttribute("City", "Test");
r.setAttribute("StateProvince", "Test");
r.setAttribute("CountryId", "IT");
vo.insertRow(r);
System.out.println("Test");
this.getDBTransaction().commit();
It inserted the row.
you were not able to see the row beacuse of commit. - may be
The row is not inserted in your case because you have not committed - may be .
Edited by: Moinak on Mar 4, 2011 5:25 AM
Edited by: Moinak on Mar 4, 2011 5:26 AM

How to create dashboard through CSOM to show workflow from external lists

We have following requirement.
SharePoint 2013 standard edition environment is installed. SO no BI site template is possible.
Development has to be through CSOM only.
Vendor data is stored in external database in SQL server 2012.
There are number of workflow running for external lists.
Now the question is how can we create a dashboard through CSOM to show status of various workflows? How to develop through CSOM?
Thanks in advance for help.

Hello ,
You can use below libraries for creating charts in sharepoint 2013 .
https://github.com/CardinalNow/ChartsInSharePoint2013
or
http://modeln.github.io/sDashboard/
ex. http://msdn.microsoft.com/en-us/library/office/dn481315(v=office.15).aspx
I have used sDashboard This is really good .
Best
Regards Kuldeep Verma
Please remember to click "Mark As Answer" if a post solves your
problem or "Vote As Helpful" if it was useful.
here requirement is totally different as CSOM and ext database, workflow and dash board together. actual answer is different.

How to create VPN through tunnel

Similar Messages

Maybe you are looking for