How to create web dynpro iView?

Hi all,
How to create web dynpro iView?
I want to create a web dynpro iView where WD is displayed in its icon when create.
Can you give me the steps and which options to select on each steps.
Thanks.

Hi Virenp
Welcome to SDN
First Check the below Link before the below message.so it would give clear idea
[Creating a Web Dynpro-Based iView|http://help.sap.com/saphelp_nw70/helpdata/en/11/0d653f0c9fa075e10000000a114084/content.htm]
http://help.sap.com/saphelp_nw70/helpdata/en/11/0d653f0c9fa075e10000000a114084/content.htm
Go to Content_Administration --> Click on Portal content -
> Go any of your Folder
Right click on the Folder and Click on New -
> Iview
Selct the 3rd Option webdynpro java applicaiton.
Select the iview as FULL page for one application
Then select the webdynpro application you deployed (it would be either under Local or in SAP.com folder)
Click on next,. and UNCHECK the Option where it would prompt to Create Page.. this is necessary only when u need a page
Click Finish , and Preview the Iview..
Suggestion : Always check on [help.sap.com |http://help.sap.com ] for any queries, which is the Bible for SAP reference.
Thanks
KT

Similar Messages

How to create Web dynpro ABAP iview in EP ?

Hi guys,
I have created Web dynpro iview in EP but when I execute it I'm getting errpr msg.
page cann't display.
Application neme= correct
namespace= correct
System allias=correct.
Could u plz tell me where is the problem?
Thanks
Prakash
Edited by: Prakash Rout on May 12, 2009 9:39 AM

Hii ,
Check this article for settings of Web dynpro abap iview, might be helpful
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0235c19-9493-2b10-64a5-8487b23a7a41
Hope it helps..
Sonal...

Steps to Create Web Dynpro iview

Hi,
i created web dynpro application using Netweaver Developer Studio.
Now i want to show that on portal.
so please let me know the steps to create web dynpro iview.
regards
mmukesh

Hi,
Logon to portal with administrator uid/pwd. Content Administration->Portal Content. Right Click on the folder 'Portal Content' and select 'iView'->'New'. In the Template Selection, select 'SAP Web Dynpro iView' and click 'Next'. In the 2nd step, provide iView Name and iView ID and a prefix.
Salect 'Java' in the 3rd step. n the 4th step, select the System (WAS System), give the project name of your webdynpro, like, local/ABC_Project in the WebDynproNameSpace and the Application Name. An iView will be available now.
After creating an iView, you should create a page and add the iView to it. Then create a role and add your page to it. Then assign this role to your user. Set the role property 'Entry Point' to true.
Then when you log into the portal you'll see your role in the top level navigation, click on it to see your iView.
Regards
Srinivasan T

Web dynpro iview in web page composer ?

Hi All,
I am developing one Web site by using Web Page Composer. Can anyone help me for how to use Web Dynpro iview on web page.
Regards,
Rahul.

HI Rahul,
As of now we can not include a Web Dynpro iView on the WPC page like other iViews.
But you can try to create a URL iView from Web Dynpro application
and then add that URL iView to your page.
_Vishal

Web Dynpro iView fail to execute on portal side

Hi Gurus
I have Created Web Dynpro Application in Backend ( ECC ).
If i tested them from SICF transaction or SE80 transaction they are working fine.
Now on Portal side, I hav created Web Dynpro iView for Those ICF Services (Web Dynpro Apllications).
But most of time they Fails to execute from Portal side.
Symptoms :
On Browser Status Bar It keep on refreshing that iView address.
and Nothing comes on O/P side.
What culde be the Problem ?
How To resolve !!
Thanks & Regards
PK

This regularly happens to us with new WDA applications - seems to be a "bug".
Deactivate the service in SICF and reactivate it, then try your iView again.
If that doesn't work, deactivate the whole WebDynpro node in SICF and reactivate it (including all relevant sub nodes & services).
Pretty sure that will fix it.

How to mapping Bapi_EeCatimesheet with Web Dynpro iview

I have problem with CATS:
1. mapping field from Web Dynpro iview with Bapi_EeCatimesheet_Worklist
Column: Activity = Bapi_EeCatimesheet_Worklist_input_Out.???
Column: xxx = ???
Variable as TimeSheet of SAP Easy View
2. How to insert Employee timesheet into SAP System by Bapi

Hi,
At first time the ApplicationParameter was not displayed among the mappable properties. After that I changed the ApplicationParameter property of the WD iView (so it became different from the default one) and created a new room template. What happened ? At the new template I could map to room_id to the ApplicationParameter. Interesting, not?
One other thing: What do you think about the following ?
1. First creating a "Concat Strings" extension to create a string like "room_id=<room_id>"
2. Creating an other extension and mapping the newly created string to the ApplicationParameter property
3. Getting the parameter from WD with the help of getRequestParameter(java.lang.String key)
I have not tried it yet, but I plan to do it.
Regards,
Ferenc

Problem while creating SAP Web Dynpro iView

Hi,
I am creating SAP Web Dynpro iView from iView Template.
The SAP Web Dynpro System Object is being created. The System Alias is also being created.
The Test Connection is successful with Portal Server.
Now, while creating SAP Web Dynpro iView from Template in Step 4:
I am not getting my System while an old system which is being deleted is being displayed.
Name of my System Object is: WD_System and System alias is: WD_Alias.
The Step name is:
Step 4: Application Parameter
Enter the paramater(s) of the application for which you want to create the iView
Regards
Kaushik Banerjee

Hi Bala,
I am not getting the System Alias under:
User Administration-> User Mapping-> Logon Data(Select a Principal) (System Alias).
The System is successfully built under System Amininstration->System Configuration->System Landscape->Portal Content->kaushikb named WD_System and System Alias is named as: WebDynpro_alias.
The Test Connection is successful.
I am displaying the result below:
SAP Web AS Connection
Test Details:
The test performs the following:
1. Checks the validity of the system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Checks if a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (kolapon:50000)
5. The host name kolapon was resolved successfully.
6. The server kolapon was pinged successfully.
7. The WAS ping service http://kolapon:50000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the WAS, you can try to call the ping service manually.
8. An HTTP/S connection to http://kolapon:50000 was obtained successfully.
Regards
Kaushik Banerjee

How can we creat web-dynpro in SAP 4.6c?

Hi Gurus,
I'm new to the Web-dynpro technology, please help me in creating a simple web-dynpro.
My questions are:
1. can we create web-dynpro in SAP version 4.6c?
2. If yes then how?

Hi Manjesh,
You cannt develop Web Dynpro's in 4.6C version. Web Dynpro's are introduced from ECC6.0 onwords.
Check this document about Web Dynpro for ABAP
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/77/3545415ea6f523e10000000a155106/content.htm
Edited by: suman kumar chinnam on Oct 17, 2008 12:51 PM

How to get the portal user id into the web dynpro iview at runtime?

Hi,
Can any one let me know, How to display portal id and as well as backend SAP user id into Web Dynpro iview at runtime. I am using Adaptive RFC model in my web dynpro application.
Raj.

Raj: check this thread. I think that will help you.
Can i get Portal User's details in webdynpro??
I had the same requirement and its works whit this solution.
regards.

Web Dynpro iView - how to pass URL parameters?

I have a Web Dynpro application that is housed in the Enterprise Portal. We have a requirement where we need to provide an external link to the iView/Web Dynpro component - for the sake of this discussion, assume it's email. As part of this URL link, we need to pass a parameter that will cause the Web Dynpro app to fetch some data.
The Web Dynpro has a startup plug parameter - call it 'id'.
I can invoke the Web Dynpro application directly, and pass the id paramter on the URL - the application can see the parameter just fine. However, when I try and do the same via a Roles-based URL, the parameter does not survive. I've tried two different methods:
http://host:port/irj/portal?NavigationTarget=ROLES://path/to/iview&id=1234
and
http://host:port/irj/portal?NavigationTarget=ROLES://path/to/iview!26id=1234
neither of which work.
is there a way to do what I'm trying to do? Note that the 'id' paramter is dynamic - I can't code it in the Web Dynpro iView configuration.

Hi,
please try the following:
http://host:port/irj/portal?NavigationTarget=ROLES://path/to/iview&DynamicParameter=<encode(id=1234)>
The value of the DynamicParameter value must bei encoded.
For details please have a lool to
<a href="http://www.sap-press.de/katalog/buecher/titel/gp/titelID-1078">this</a>
This book will be also available in English soon.
Best regards
Jochen

IView not found error when excuting ABAP Web Dynpro iView

Hi Experts,
I have created one ABAP Web Dynpro iView for an existing Application.
Parameters I have passed for iView creation.
Namespace : sap
Application Name: SampleApp
System Name: R3_SYS.
Can any one please pass on me the details what are the mandatory parameters need to be passed.
Thanks in Advance,
Chinna.

Hi Chinna,
You need to check the following parameters like
Namespace - should be 'sap' as this is root node in SICF
Application Name: - check name of WD application in se80
Please refer to below thread for creating WD ABAP iview.
Re: Webdynpro ABAP iView Blank Page
Web Dynpro for ABAP iVIew's Namespace parameter
how to create iview from webdynpro application abap
Hope it helps
Regards
Arun

How to integrate Web Dynpro Java 7.1 with EP 7.0?

Hi,
I have 2 servers: 1 is EP 7.0 and another is CE 7.1. Is there any way how to use Web Dynpro Java deployed in CE 7.1 as an iView in EP 7.0 other than portal federation? We cannot use the portal content producer-consumer concept. Is there any other way how to do that?
Regards,
Tomas

I have same task.
I did not understood how and which system you created to resolve problem?
As well, any reference would be very helpful.
thanks
Edited by: Ivan Ivanov on Sep 7, 2009 5:51 PM

Web dynpro iviews

Hi all,
I have couple of questions on web dynpro iviews.
Is it necessary to have sld configured for executing a web dynpro application as an iview in the portal.
My other question is how do you set the Jco connections for a web dynpro application. Please advice
thanks for your help in advance.
regards
Henry Ragl

Hi Henry,
Yes,If you are developing Web Dynpro applications that connect to a back end with a static user, the use of an SLD means that you can, for example, avoid using passwords as part of the Web Dynpro application code, since the SLD utilizes a secure storage for the password.
You configure an SLD for a Web Dynpro application using the Visual Administrator.
Your Second Question Jco Connection Please click the link below.
To Create Jco Connection you have to go to your J2EE Engine.
http://localhost:50000/ and click the Web Dypro. And again click the Content Administrator remaining details are in the link below
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/3a/3b1b40fcdd8f5ce10000000a155106/content.htm">Jco Connection</a>
PS: Give the points if it helps you

SAP Web Dynpro iView not working!

We are trying to run BI reports based on Web Dynpro ABAP in portal. I created a SAP Web Dynpro iView with following parameters
System : SAP_LocalSystem
Namespace : sap
Applicatioin Name : ZXXXXX_RRE (This is the template name)
When I try to preview the report I get portal runtime error with following error dump in log file
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template
'<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PARAMETER_MAPPING PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
System: &#39;SAP_LocalSystem&#39;,
Attribute: &#39;client&#39;.
I have checked SAP_BW system object and tested the connections all connection test for SAP_BW is successful. BI Portal system is set up with SAP web dispatcher, ITS and WEB host names in system object are configured something like xxxx.hostname.com:443 since it's SSL.
Am I missing anything here?
Thanks
Praveen

Hello Pravin,
Currently i am also facing the same error. I am having set of Webdynpro-ABAP applications, and accessing from Portal.
I tested respective applications from SE80, all are working fine.But while accessing from Portal its giving Portal runtime error-Unable to parse etc....
I checked my system object.. both WAS and ITS connections are successful.but i mentioned its related to ITS, where can i test my ITS further level..
Though these are WDA applications , how these related to ITS..
I am also getting same error message.. Please suggest how can i go head
Thanks in Advance
Ganesh

BI Reports in Web Dynpro iView

Hi Experts,
I need a favour from you in estimating small requirement with BI reports & Web Dynpro iView.
My first query, is it possible to build horizontal drilldown menus
Second query, is it possible link the BI Reports from Web Dynpro application
third query, is it possible to put both Web Dynpro iView & BI Reports view in one Portal iView.
If all the above are possible, I have a requirement that should fulfil the below
In a portl iView, I have several BI Reports displays based on called report. But at the moment links to the report are in simple hyper link. Instead of hyperlinks, I want a horizontal menus as hierarchical/child structure. To acomplish this I chose, Web Dynpro as the best solution.
I have some development exeperience in Web Dynpro, but never encounterd such a requirement.
If any one can help me out in estimation, posibilites of the solution that would be a great help for me.
Your help will be highly appreciated.
Thanks in Advance,
Chinna.

Hi Chinna,
Check the following threads:
Show BI report in a Web Dynpro App
BI data in Web Dynpro
Re: How to create a Report from WebDympro
Re: BW server details from webdynpro
/community [original link is broken]://Bi,Portal Webdynpro
And a How To Guide:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a303e745-0d01-0010-b280-802bca844b8f
*Second query, is it possible link the BI Reports from Web Dynpro application
third query, is it possible to put both Web Dynpro iView & BI Reports view in one Portal iView.*
You can not assign two types of app in a single iview but you can have multiple iviews assigned to a page.
This will guide you.
Regards.
Rajat

How to create web dynpro iView?

Similar Messages

Maybe you are looking for