How to create WebService Source System?

Hi,
I am trying to integrate XI and BI. How do I create a webservice source system? When I create the webservice source system in RSA1, it asks for a logical system name. Do I need to create a RFC destination for this logical system? What other steps should be done here?
Thanks,
Deepthi

Thank you. I am actually referring to step 5 in the below how-to-guide.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
The step 5 says "create webservice source system". But, it does not give details as to what steps should be taken to actually create this. Anyone, used this approach?
Thanks,
Deepthi

Similar Messages

How to create a Source system

Hi All,
I am using SAP BW 3.5 and R3 ECC 5 versions (IDES system).
Now how to create connections between BW and R3.
Can anybody help me..
Thanks in Advance
Narendra

Hi Sunil Reddy,
Thanks for your reply, When I tried to create a SS by following your steps. The SS is already exists.
I am using BW 3.5 and R3 ECC 5 version. In my SAP logon pad. I can see only only 1 entry (I can use both BW and R3 in one screen). I can use BW and R3 transactions in single screen. The application server is same for BW and R3.
I tried to create connection between BW to BW and R3 to BW. But failed.
Can anyobdy help me on this issue.
Thanks in Advance
Narendra

Error when creating SAP source-system in RSA1

hi,
we have a new bi-installation. the bi-system is running in the SAME system as our erp 2005-system is running.
the bi-client is 700, our source-system (FI/CO) client is 101. I want to create a source-system in RSA1. at the end i get the following error message:
<b>Name D01MAND700 of client 700 is not the same as the name D01MAND101 of the Warehouse
Message no. R3225
Diagnosis
In order to guarantee error-free communication between the source system and the SAP Business Information Warehouse, the logical system names must be known to both.
The system has established that the selected source system name D01MAND101 in the SAP Business Information Warehouse is not the same as the logical system name D01MAND700.
System Response
Processing has been terminated and all changes undone.
Procedure
Create the source system under the name D01MAND700 in the SAP Business Information Warehouse or change the logical system name for client 700 to D01MAND101 in the ALE customizing screen of the source system.
Note that the logical system name for client 700 may already be being used for other ALE scenarios. If this is the case you are not able to change the name.</b>
i don't understand this error ? is it because the BI-system and the erp-system is the SAME system ?
reg, Martin

mr. kapadia,
there is one entry in table rsbasidoc, and it looks like that:
SLOGSYS     D01MAND700
RLOGSYS     D01MAND700
OBJSTAT     ACT
BIDOCTYP    ZSCA017
TSIDOC3X    0
TSPREFIX    CA
SRCTYPE     M
SAPREL      700
TSTPNM      D78358
TIMESTMP    20.070.622.093.042
SBWBCRL     700
RBWBCRL     700
looks strange, right ? what should i do ? delete this entry ? how can i do this, it is a customizing table, i cant delete it via SE16 ?!?
reg, Martin

How to verify the Source systems connectivity with BWQ System.

Hi All,
I have diff source systems. And my requirement is to check the source systems connectivity with BWQ (BW Quality sys). please any body tell me the steps how to check the source system connectivity ?
Thanks & Regards,
Manju

Hi Manjula,
If you encounter problems when establishing a connection to your target server, check the following:
A message box appears while performing one of the following actions:
      Setting connection by choosing Apply to local session.
      Testing connection settings by choosing Test settings.
      Creating SAP TSQL objects
If errors occurred, they are displayed in the respective message box.
   Check developer trace files in ST11.
Test connection:
     For RFC related errors, check the RFC connection via SM59
     For database multi-connect errors, check if you can connect to the target SQL Server with the SQL Server Query Analyzer. Also check if the DBCON entries are correct.
Regards,
RK

Problem in creating SRM source system in BW

hi all,
as much i knw. i can say that there are 4 steps in creating SRM source system in BW :-
1) creating logical system for SRM client
2)creating logical system for BW client
3)naming background user
4)creating SRM source system in BW.
now i am facing some basic problems....
1) I logon to SRM system using client 001 so do i need to assign SRM logical system i am creating to this client only.
2) same way i logon to BW using client 800, so do i need to assign BW logical system to client 800.
3)how can i create background users for link to SRM.
4)does anything needs to be done in RFC.

Hi,
Once you read the following help on creating source system,Most of teh doubts will be cleared :
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
http://help.sap.com/bestpractices/crossindustry/businessintelligence/v131/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
With rgds,
Anil Kumar Sharma .P

Error when we create the source system file

i am creating the source system file of ECC to BI. how to slove this problam. when i am trying activating this error is getting.
The following errors occurred in the source system: RSAR 374
Result of the destination check: Timeout RSAR 375

Mr. Reddy,
Check out this links.
Error while source system creation/Source system transport
Hope it helps you.
SRS

Webservice source system transport

Hello,
I have created a Webservice source system in our development server. Also it has datasources created.
The transport request containing the source sytem fails with the error message saying
Source system GPU_WBSRV does not exist.
But I have included the source system in my transport request.
The transport request keeps on failing with this message.
Workaround performed by me:
I created the source system with the same name and settings in the Quality server and then transported the same request.
The transport went through successfully and the datasources and other objects for the webservice were also transported under that source system. So all looks fine....
But now if i transport the same requests to my acceptance box...it fails with the same error. so after creating the source system in acceptance box when i transport the datasource , the modified version of datasource is seen. The datasource does not get activated no matter what I do.....
Please suggest me with your valuable inputs..as I have explored the webservice datasources for the first time.
- Amit

Error message :
Screen output without connection to user .
Error when activating DataSource DS_SUBCOMPDET GPU_WBSRV

Job not started (create) in source system when I start the infopackage

Hi experts...
I have a problem with a process. (infopackage)
This message in status during 17 hours.
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
After..
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I don't know how resolve this problem, the job that shoul be created in source system was not create.

Hello RBS,
As per the message posted ur idocs are in status 64 so u need to process those idocs manually and you can do this by going to transaction BD87 and reason u get this kind of problems is because you dnt have enough dialog process in application server or because of load balancing so contact your basis team if u face this kind of problem regularly.
Assining Points = Thanks in SDN
Thanks & Regards
Jai
Edited by: jai mam on Jul 8, 2008 4:19 PM

How to create webservice for abap RFC

how to create webservice for abap RFC.......................
plz any could tel me

I'll answer my own question...
In SE80 you create the Function Group and something called a Virtual End Point. These are the only items that transport forward to you QA and eventually your production system. Everything else has to be created in SOAMANAGER on the target systems.
In Development in SE80, when you create the Virtual End Point, this creates a corresponding entry visible in transaction SICF. When you are done in SOAMANAGER, it creates three more entries in SICF. The process of transporting the Virtual End Point does NOT create any entries in SICF in QA. Don't let this be confusing. In QA, SOAMANAGER will create all four SICF entries.
Also, if you try to secure the web services using the S_SERVICE object, you must actually test the web service before you can add it to any roles. This is because the USOBHASH table is not populated for the web service until you actually run the web service for the first time.

Create SAP Source System Failed

Hi all,
We are using NetWeaver 2004s BI and try to connect to ECC 5.0. I tried to create SAP source system but got error message saying "RFC user logon failed". When I check RFC destination in ECC 5.0 for BI, the test connection is ok, but the remote logon will pop up another logon screen asking for id and password. I am pretty sure that the id and password in RFC destination is correct. The RFC destination in BI is ok. Can you help me out with this? Thanks a lot in advance.

Hi,
Check the Default Logon <b>Client</b> for ECC 5.0
and verifiy that the User is in the Same Client
Each RFC destination has a mapped user for specific Client..Check the Client and User in the same client
regards
Happy Tony
Message was edited by: Happy Tony

How to create the Business System both sender and receiver in SAP XI / PI

Dear All
kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
Regards
Blue

Hi,
If by any chance you are not able to find these....
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
Regds,
Pinangshuk.

Creating new source system in bw

hi all
i have got one problem with creating source system to bw from r/3,i have created RFC connection to bw and r/3
and i was trying to create source system manually and automated but it is not activating i'm getting fallowing error
...the fallowing errors occurred in the source systemrsar--mess no 374
....result of destination check timeout rsarmess no 375
can any one help me on this please

Hi!
Check out the connection with defined RFC.if it is ok,then check out the privliges for the user using which yuor trying to create the source system.
Best Regards
Sunil.

Create sap-source system in netweaver

Hello,
i want to create a R/3-(4.6c)-source system in my Netweaver-BI (2004s), but I have problems with the connection.
For the connection i created in the Netweaver a new destination and a user "User_A" with the profile "S_BI-WX_RFC / Business Information Warehouse: RFC-User in Warehouse.
In the R/3 I created a user "User_B" with the profile "S_BI-WX_RFC / Business Information Warehouse, RFC-User Extraction"
After creating the Source-System in the AWB with the destination and the 2 Users, I have to Log-On as an administrator in the R/3. After Log-In comes the message "User already exists in source system. Only continue if Profile and Password Are Correct."
Then I have to create the Destination in the R/3. There I fill in the "Logon"-Part my "User_A", but then I get the alert:
RFC user logon failed. Check the connection. Message no. R3 077.
Diagnosis: You tried to logon using the RFC user. This action failed.
System response: Name or Password not correct
But I'm sure that I made no mistake with the password.
Has anyone an idea what I did wrong?
Thanks
Malte

Hi,
Generally we maintain the Destinations and userids in both systems first, and then create the source sytem in AWB of BIW.
Have you created the Logical system names in both the systems ?
Have assigned the client to the logical system name to client in both systems?
Have you mentioned correct client in the destinations?
With rgds,
Anil Kumar Sharma .P

How to delete a source system in BW?

Hello All!
Can anone please inform me about the procedure to delete a source system or inform me in which document i can find this information. Actually i wish to assing my newly installed BW3.5 system to a new logical system (i.e) its currently assigned to some other logical system where it has ME as default source system. to change the logical system we need to delete all the source systems in the old logical syste. So please explaing me how to delete the source system Myself(current BWsystem). there is no data and no data sources existing in the system its abosolutly fresh.
Thanking you for help in advance
with regards
Ashwin Kumar Gadi

Hello Roberto!
Thanks for ur response. But there bo such delete option available under the context menu for the source system for the Myself source(current BW). only change buton appears but when we click that it say changes are no posible. Is the any other way to delete it manually.
with regards
Ashwin

How to assign the source system to the virtual provider

Hi
How to assign the source system to the custom virtual provider with services in BW 3.5 ?
Regards
PWnuk

Hi PWnuk,
Refer this link on how to implement a virtual provider with services.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4752ec2d-0a01-0010-ecb0-a145cf2e3e92
Hope this helps
Regards
Karthik

How to create WebService Source System?

Similar Messages

Maybe you are looking for