How to create Windows 7 Homegroup with Verizon Router

I have a desktop and a laptop, both running Windows 7 (the desktop is running Windows 7 Home Premium, the laptop  is running Windows Ultimate).  With XP I had a nice network and could share printerhs, files, etc .
After I upgraded both machines from XP to windows 7 I cannot get the homegroup to create AND share.  I can create a homegroup on either machine, but in either case the other machine cannot see the home network.
Windows 7 says that Homegroup requires IPv6, but Verizon Routers don't support this protocol.  I have attempted, as noted on the internet, to disable IPv6 on both computers,  but this didn't seem to solve the problem.  I chatted with an Verizon tech support person who told me no IPv6 routers.  
I am looking for suggestions on how to successfully network my computers with Windows 7 and my Verizon router.  (Actiontec M1424-WR).  We previously tried to put another router in the interface to do wireless and that didn't work.  
Thank you.

IPv6 connectivity needs to be enabled on the Windows 7 machines to support HomeGroup networking. Make sure you re-enable those. Once IPv6 is re-enabled, verify that the PCs are at least holding a Link-Local IPv6 address. Open up command prompt and type in "ipconfig" to verify it is holding something, first of all. It's also a good idea to make sure Teredo is in working order as well, as it's considered to be needed in order to use IPv6 on an IPv4 router.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Similar Messages

  • HT4528 Good afternoon ...  I would like to know how I can do to communicate with Verizone company to see if I can unlock my iPhone 5 which acquired in NY last year, buy it because you sold me released but is totally false ...  I welcome your comments ...

    Good afternoon ...  I would like to know how I can do to communicate with Verizone company to see if I can unlock my iPhone 5 which acquired in NY last year, buy it because you sold me released but is totally false ...  I welcome your comments ...

    Krawly11 wrote:
    That's what they told me at the time of purchase and that's why the team acquired ...
    But when I get to Venezuela and introduce NANO-Sim in a line to use the phone here just does not respond to the network ... None of the 3 phone lines we handle here ...
    It is a 64G IPhone 5 ... 
    Regardless, it is not a matter of carrier locking.  Verizon iPhone 5 phones were never GSM sim-locked to begin with.  Every iPhone Verizon has sold since the introduction of the iPhone 5 has been sold with an unlocked GSM slot, as required in the USA by their agreement with the FCC.  They have not been allowed to sell any iPhone 5, iPhone 5c nor iPhone 5s devices with GSM carrier locking in place.
    Your connection problems are from some other cause - it is NOT a carrier locking issue.

  • How to install Windows 8.1 with Windows 8 Product key?

    I have purchased Upgrade pack from Windows 7 to Windows 8. I have also Updated the OS to windows 8.1 through Store. How to install Windows 8.1 with Windows 8 Product key?

    The download link for the Windows 8.1 installer at the Upgrade with Product Key Only does not accept a Windows 8.0 product key. I ended up using the trick suggested by Andre Ziegler in this thread to obtain the 8.1 download independent of the Windows
    Store, but I haven't yet checked if the 8.0 key works from 8.1 Setup.
    I do IT for a living but I have plenty of family members that bring their notebook PCs to me and ask me to do the heavy lifting, and I'd rather not re-download the same 3.6 GB every single time someone tells me to fix their PC. I also want to be able to
    re-install 8.1 from the source media in case of a catastrophic hard disk failure and I have to replace the disk.
    As an aside, tools that retrieve product keys for installed products end up retrieving the 8.0 product key from an 8.1 install that was upgraded via the Store.  It kind-of makes sense that an 8.0 key could work to install 8.1 because 8.1 is supposed
    to be a free upgrade for licensed 8.0 users, but this doesn't seem to work until after 8.1 is successfully installed via some trickery and the user supplies the 8.0 key to activate it.

  • How to create an unsolved cube with awm???

    hi all,
    I readed the "Oracle Olap developer's guide to the Oalp api" and I found there's 2 type of Cube: Solved and Unsolved Cubes. And this document says: "... if all the data for a cube is specified by the DBA, then the cube is considered to be Solved. If some or all of the aggregate data must be calculated by Oracle OLap, then the cube is unsolved ..."
    I tried with awm 10.2.0.3.0A to create an unsolvedCube but I can't. All cubes I created are solvedCube. To know if a cube is solved or unsolved, I wrotte an program in Java to read informations of package mtm.
    Some one can tell me how to create an unsolved cube with AWM ou other soft please!

    SH is not a relational OLAP data model which is quite different from the GLOBAL schema which is based on an Analytic Workspace.
    If you change the aggregation method you will need to re-compute the whole cube which can be a very big job! You might be able to force the unsolved status be de-selecting all the levels on the Rules tab in AWM. However, I think by default analytic workspace OLAP models always provide a fully solved cube to the outside world. This is the nature of the multi-dimensional model.
    Relationally, as keys are located in separate columns a cube can be unsolved in that the key column only contains values for a single level from the corresponding dimension tables. If more than keys for different levels within the same dimension appear within the fact key column then the cube is deemed as being solved.
    Therefore, I am not sure you are going to get the information you require from the API. To changes the aggregation method you will have to switch off all pre-compute options and also disable the session cache to prevent previously calculated data being returned when you change the aggregation method.
    Hope this helps
    Keith Laker
    Oracle EMEA Consulting
    BI Blog: http://oraclebi.blogspot.com/
    DM Blog: http://oracledmt.blogspot.com/
    BI on Oracle: http://www.oracle.com/bi/
    BI on OTN: http://www.oracle.com/technology/products/bi/
    BI Samples: http://www.oracle.com/technology/products/bi/samples/

  • How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?

    1. How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?
    When multiple tables are involved , and the actual number of rows returned is more than what the explain plan tells. How can I find out what change is needed  in the stat plan  ?
    2. Does rowsource statistics gives some kind of  understanding of Extended stats ?

    You can get Row Source Statistics only *after* the SQL has been executed.  An Explain Plan midway cannot give you row source statistics.
    To get row source statistics either set STATISTICS_LEVEL='ALL'  in the session that executes theSQL OR use the Hint "gather_plan_statistics"  in the SQL being executed.
    Then use dbms_xplan.display_cursor
    Hemant K Chitale

  • How to create a Sales order with ref to Contract using Function Module

    How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

    We have a unique situation where we like change the sold-to customer of the sales order
    once order has been created. These orders have been created using either by function module
    BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
    These two processes work abosolutely fine except someone might have change the sold-to
    customer of the ship-to customer of the original sales order. If this the case then the new
    sales order will be created with the old sold-to and with not the new sold-to.
    We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
    the returned parameteres of the BAPIs and they are all successful but sold-to remains the
    same old one.
    Any help would be much more appreciated.

  • How to create a pdf file with CS5

    Hello, I'm new to PhotoShop CS5 and haven't figured out yet (despite two hours of trying) how to create a pdf file with pictures and texts.  Can someone please help me with this ?  The "help" button in CS5 doesn't seem to cover this question.  Nor do the FAQs.
    Thank you very much.

    Save As... Photoshop PDF.

  • How to create  a test plan with specific transactions (or program)

    Hello,
    I'm a new user in Sol Man !
    How to create  a test plan with specific transactions (or program).
    In my Business Blueprint (SOLAR01) I've created in 'transaction tab' the name of my specific transactions and linked it.
    In my test plan (STWB_2) those specific doesn't appear to be selected !
    Thanks in advance.
    Georges HUYNEN

    Hi 
    In solar01 you have defined but you have to assign the test case in solar02 for this test case in the test cases tab.
    When you do so expand the business sceanario node in test plan generation of STWB_2 transaction and now that will appear.
    Also visit my weblog
    /people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
    please reward points.

  • How to create a web template with company logo

    how to create a web template with company logo . can any one help me with the steps. or any notes. thnaks in advance .
    2. i have 25000 articles and client want to have a selection feild to see top article ex:50,10,20, 100, 1000 etc . same for bottom articles . plz let me know how to do it . thanks for replay . i am new bw so plz .
    thanks to you all

    Hi
    1) Please read
    http://help.sap.com/saphelp_nw04/helpdata/en/4a/c8353c51aab32be10000000a114084/frameset.htm
    2) Create a condition in the Query Designer: Use a formula variable
    See http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/frameset.htm
    Heike

  • How to create a transport request with query and only with its structure.

    HI guru,
                how to create a transport request with query and only with its structure.transport request should not  include any other query items like ( variables, conditions...etc)
    thanks in advance.
    venkata

    Hi,
    Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
    Regards,
    anil

  • How to create a csv file with NCS attributes?

    Hi
    i installed Cisco Prime NCS and trying to perform bulk update of device credentials with csv file.
    How to create a csv file with all required attributes?
    This is part of NCS online help talking about this topic:
    Bulk Update Devices—To update the device credentials in a bulk, select Bulk Update Devices from the Select a command drop-down list. The Bulk Update Devices page appears.You can choose a CSV file.
    Note        The CSV file contains a list of devices to be updated, one device per line. Each line is a comma separated list of device attributes. The first line describes the attributes included. The IP address attribute is mandatory.
    Bellow is test csv file i created but does not work:
    10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
    10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
    The error i am getting while importing this file:
    Missing mandatory field [ip_address] on header line:10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
    Assistance appreciated.

    It looks like the IP address field is incorrectly set.,
    It should be as follows
    {Device IP},{Device Subnet Mask}, etc etc
    so a practical example of the aboove could be (i dont know if this is completely correct after the IP address / Subnet Mask)
    10.64.160.31,255.255.255.0,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
    below is a link to the documentation
    http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1840245
    HTH
    Darren

  • How to create a procedure function with a return value of ref cursor?

    Can anybody provide a sample about how to create a procedure function with a return value of REF CURSOR?
    I heard if I can create a function to return a ref cursor, I can use VB to read its recordset.
    Thanks a lot.

    http://osi.oracle.com/~tkyte/ResultSets/index.html

  • How to create an install cd with the final cut pro x app if the app comes from App.Store?

    How to create an install cd with the final cut pro x app if the app comes from App.Store?

    Just copy the Application FCPX to your CD. When you want to install drag the FCPX to the Application folder and you are done.

  • How to create item wise invoice with reference to sales order.

    Hi ,
    Please let me know how to create item wise invoice with reference to sales order.
    Ex : Sales order has 2 line items .
              When creating invoice system should create two invoices for each line items.
    I have tried with copy control but I am not able to do it.
    Please advise.
    Regards

    Hi,
    Please let us know your exact requirement. Whether you want it to be fixed like only one line item to be billed every time ot it to be based on selection you do every time.
    As per my understanding it should not be fixed and in that case it should like as follows,
    In VF01 you will select Del. document/S.O. number and click on selection list and will take you to next screen as mention below,
    and select desire line item to be billed and click on copy and will take you to billing screen.
    Regards,
    Ajit K Singh

  • How to create Web Service Proxy with help of WSDL.

    Hi ,
    How to create Web Service Proxy with help of WSDL .
    Please help me .
    Thanks in advacne for reply .

    check out this article. It has all the details
    http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html

Maybe you are looking for