How to create workflow container element from workflow builder?

How to create workflow container element from workflow builder?

in workflow
three are five container, for each container we have define according to requirement of that particular container.
1. event container
2. workflow container
3. task container
4. method container
5. rule container
1. event container
in evernt contianer we have to create elements in BOR where we create event in parameters
2. workflow container
in workflow container we have to create elements in workflow builder itself. in left side of the screen we see <double click to create element>
3. task container
in task container we have to create in task itself it has a tab called container elements
4. method container
in method container we have to create in BOR. it is created in parameter of that BOR.
5. rule container
in rule container we have to create in PFAC transaction

Similar Messages

  • How to create a container element?

    Hi,
    Could somebody please tell me how to create a container element and how to create a multi container element? How is this element used in the fork step?
    I am using a fork with 3 branches but the agent assignment is a problem.The workitem does not go to the user set in the agents tab.
    Regards,
    Monica.

    Hi Monica,
    Within your Workflow Builder, there is a box on the left hand side that (Workflow Container). You should have an option (in change mode) to right-click and create or double-click on the <Double-Click to create> tab.
    Or you can go to the Workflow Container "Goto -> Workflow Container" and click on the "Create" <F5> icon.
    Same theory applies to creating a container element in your task. Go to your task and click on the "Container" button and select "Create".
    When creating your container, you can specify if it is a multiline container by checking "Multiline" under the container attributes.
    In a fork step, you would really only use your "Container Element" in the "End Condition" of a Fork step.
    Please advise what the "Agent Assignment" is referring to when you're using it in your fork? Which step in the fork?
    If you are assigning agents in one step of the fork, you cannot expect these agents to apply to your other 2 fork steps. The forks work independently of each other (to a point).
    Please provide more information if you need more help.
    Kind regards,
    Tom

  • How to create a container element in workflow container

    Hi,
    I am learning WF by a Tutorial. In which absence of notification was considered as example. As per tutorial, I created two task for creating a Notification and checking a absence
    In the next step it ask to create a container element(approver) to workflow container. How i can create the same.
    Also, please clarify me on the binding between task container and workflow container....with this example
    Thanks
    Suresh

    Hi,
    On the workflow builder LEFT side below the navigation area u can see this <Double-Click to Create>.
    Double click and create the container.
    During binding it looks as follows.
    Workflow  -
    >   Task
    Workflow <----
    Task
    What happen here is from workflow the data passed to task and it is used for processing, after that it returned back to the workflow. Now u can create the container on bothside and bind the data. ie Variables.
    Creating container u can refer : http://www.****************
    Reward for useful answer.
    Richard A

  • How to create an XML document from a String.

    Can anyone help,
         In the Microsoft XML Document DOM there is a load function load(string) which will create an XML document, but now we are switching to Java and I do not know how to create and XML document from a string, this string �xml document� is passed to my program from a webservice and I need to read several xml elements form it in a web server.
    This string is a well formatted XML document:
    <?xml version="1.0" encoding="UTF-8"?>
    <Countries NumberOfRecords="1" LanguageID="en-us">
         <Country>
              <CountryCode>AU</CountryCode>
              <CountryName>AUSTRALIA</CountryName>
         </Country>
    </Countries>

    Thanks PC!
    I made it work using:
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = factory.newDocumentBuilder();
    factory.setIgnoringComments(true); // We want to ignore comments
    // Now use the factory to create a DOM parser
    DocumentBuilder parser = factory.newDocumentBuilder();
    //TransformThisStringBuffer is a string buffer wich contain the 'XML document (String)'
    InputStream in = new ByteArrayInputStream(TransformThisStringBuffer.toString().getBytes());
    // Parse the InputStream and build the document
    Document document = parser.parse(in);
    But which one is faster InputSource or InputStream, were would you put the "new InputSource(new StringReader(yourString))" in the above code?

  • How to create an UI element dynamically on action in drop down?

    Hi,
    How to create an UI element dynamically on action of selecting a value from the  drop down?
    help out with the steps i need to follow..

    Hi,
    <u><i><b>Dynamic UI Element creation</b></i></u>
    We can create it only in the WD Modify View.
    Get the instance for the Root UI Element Container.
    Create the UI element Ex: Input Field, Text View etc.
    Bind the UI Element to the Attribute Value.
    Now bind the UI Element to the Root UI Element Container.
              IWDTransparentContainer root =(IWDTransparentContainer)view.getRootElement();
              IWDDropdownByIndex DdbName = (IWDDropdownByIndex)view.createElement(IWDDropdownByIndex.class,"DdbName");
              IWDDropdownByIndex DdbAge = (IWDDropdownByIndex)view.createElement(IWDDropdownByIndex.class,"DdbAge");
              IWDDropdownByIndex DdbGender = (IWDDropdownByIndex)view.createElement(IWDDropdownByIndex.class,"DdbGender");
              IWDNode Mad =wdContext.getChildNode("Person",0);
              IWDAttributeInfo NameAtt = Mad.getNodeInfo().getAttribute("Name");
              IWDAttributeInfo AgeAtt = Mad.getNodeInfo().getAttribute("Age");
              IWDAttributeInfo GenderAtt = Mad.getNodeInfo().getAttribute("Gender");
              DdbName.bindValue(NameAtt);
              DdbAge.bindValue(AgeAtt);
              DdbGender.bindValue(GenderAtt);
              root.addChild(DdbName);     
              root.addChild(DdbAge);
              root.addChild(DdbGender);
    <u><i><b>Dynamic Action Creation</b></i></u>
    Create the Action in the Action tab.
    Create a Button.
    Get the reference for the created action (Through the Event Handler).
    Bind the Action to the Button.
    Bind the Button to the Root UI element Container.
    IWDButton ButGo = (IWDButton)view.createElement(IWDButton.class,"ButGo");
    IWDAction ActGo = wdThis.wdCreateAction(IPrivateStartView.WDActionEventHandler.GO,"Click");
    ButGo.setOnAction(ActGo);
    root.addChild(ButGo);
    Now write the required code for the Event Handler that is associated with the Action.
    //@@begin onActionGo(ServerEvent)
        IWDNode Mad = wdContext.getChildNode("Person",0);
         wdComponentAPI.getMessageManager().reportSuccess(Mad.getCurrentElement().getAttributeAsText("Name"));
         wdComponentAPI.getMessageManager().reportSuccess(Mad.getCurrentElement().getAttributeAsText("Age"));
         wdComponentAPI.getMessageManager().reportSuccess(Mad.getCurrentElement().getAttributeAsText("Gender"));
    //@@end
    Regards
    SURYA

  • How to create a container?

    I have installed Designer 6i r4.1.1
    I can create workarea, but I don'know and don't find how to create a container.
    Please expand me how to do it?
    Thanks.

    Hi,
    Just go to Repository Object Navigator from the Designer front panel.
    Right-click on the Workarea in the navigator. Select create child from the menu and select Application system from the
    list that appears.
    HTH
    Ritu

  • How to Create a new column from two different result sets

    How to Create a new column from two different result sets, both the result set uses the different date dimensions.

    i got solutions for this is apply filters in column formula it self, based on the requirement.

  • How to create a new connection from SAPGUI to Test drive?

    Hi,
    I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
    I entered the following values for my new connection entry
    Description: SAP Netweaver
    Application server: 192.168.1.160
    Instance number: 01
    System ID: DB2
    SAProuter: /H/192.168.1.160/S/3201/H/
    But it does not work. Any idea about the values needed  for creating a new entry?
    Thanks in advance,
    Dariyoosh

    >
    Dibya R Das wrote:
    > Why are you entering a router string? Can't you reach a box directly from your machine?
    >
    > Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
    >
    > Remove the router string you wont need if the above works.
    >
    > - Regards, Dibya
    Hello there,
    Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
    Kind Regards,
    Dariyoosh

  • How to create a PAR file from EAR file

    Hi,
       I have created an Web Dynpro Application . When i deploy it in Remote J2EE Engine, it will deploy as EAR file. It then runs as normal Web Application in Web browser. My requirement is to create an iView for my Web dynpro appn in EP. That is possible only by creating a PAR file. so How to create an PAR file from EAR in NWDS(NetWeaver Developer Studio).
    How to access the EAR file in NWDS or J2EE ?
    Thanks in Advance ,
    By
    Saravanan

    Hi,
    To create a iview,
    log on to portal, New iView and select SAP webdynpro iview.
    It will ask for namespace which is usually , local/Project Name
    and application name is the name of the application.
    We dont have to create par file for this requirement

  • How to create a pdf file from multiple images ?

    Dear All,
    I want to create a SINGLE page pdf file from two or more page size images that are combined to make a single page pdf. Again, this question is on pdfs that are made out of several, atleast  two color images and a black-and-white mask for one of them.
    I have such pdf files from an unknown source (the producer is edited out) whereby there are three tiff images, obtained using the well known pdfimages extractor.
    When I want to make a pdf out of tiff or png or other image formats, I right click and tell Adobe Acrobat to make a pdf.
    However, I dont know how I can give a command to select say,  three tif images and specify which is the mask for which and then join  them in a way that I get the pdf from the composite of the two color images and a mask for one of them.
    Please help me out.
    I am a little familiar with the pdf structure skeleton and when necessary, fixed xref tables in one of my favorite editors. A few years ago, I also wrote a bunch of javascripts to make some annotations and needed some automation and used some itext type libraries. However, I need your help in this problem as I am now rusty and forgot some of what I studied to solve my earlier problems. This is a new problem for me. Gentle hints from you would be very nice to help me in this problem. Please specify if necessary what manual and pages to read. in the pdfspec.
    Best Regards
    Disabled Veteran [physically handicapped]

    Hello Again.
    On Fri, May 11, 2012 at 12:20 PM, lrosenth <[email protected]> wrote:
    >
    > Re: How to create a pdf file from multiple images ?
    >
    > created by lrosenth in PDF Language and Specifications - View the full
    > discussion
    > ________________________________
    >
    > No clue who Irving is…
    >
    I was hoping to have your first name so its easy for me to address you.
    > I have no clue what OS platform, programming language, etc. you use so
    > can’t really narrow things down.
    I would gladly mention that I am working on windows platform, preferably XP.
    I can also work on linux for free products that come with it.
    >  Also, as this is an Adobe forum, we only
    > recommend Adobe products – so there may be other options that even my list
    > wouldn’t include.
    But adding other products, for the help of an adobe products user,
    even if it outside adobe, shall add greater prestige to your company
    and give impression of user-centeredness.
    > If you read ISO 32000-1:2008 (aka the PDF standard), you will find the
    > information about Images and Image Masks well described.  I didn’t think I
    > needed to repeat any of that information.
    Well, just add the few pdf stanzas since you are proficient on it and
    I am presently a little rusty as I mentioned. Just asking a little
    extra yard, not even to go an extra mile.
    > And, if you read that same document, you will see that there is NO SUCH
    > THING as a “text only PDF”.   All PDF documents are structured binary files.
    Well, ascii format or uncompressed format that is human readable. I
    know its a binary file, but human readable ascii version of it.
    I hope you can give me some stanza and various other approaches
    possible so I can select or combine things for myself. I see only a
    miniscule number of posts claiming to have written masks in this forum
    and then with no details.
    Regards
    Roger
    Message was edited by: dying veteran
    because the adobe posting system went crazy and truncated all except the first line ... dunno why

  • How to create a container in se51

    hi,
    i have two doubts
    1. how to create a container in se51.
    2. For eg: while calling a function i click on pattern which and give the function module name it will give the function module with the exporting and the importing parameter.
    My question is how to create an object.

    Hello Preethi,
    First in the code:
    DATA container TYPE REF TO cl_gui_custom_container.
    create the custom container
        CREATE OBJECT container
                      EXPORTING container_name = 'CUSTOM'.
    Second in graphical screen painter you must build an custom control with same name:  'CUSTOM'
    An example of this is the program: RSDEMO_CUSTOM_CONTROL
    Regards.

  • How to create a .DLL file from a .C file ?

    Hi everybody
    I'm looking for a method how to create a .DLL file from a .C file .That Dll file will be used to perform a board to measure voice quality accoding to the international standard named PESQ (perceptual evaluation of speech qualty) P.862.
    Can anyone help to start dealing with Dlls and give some advices to avoid errors ?
    thx
    Attachments:
    source.zip ‏37 KB

    Hi sinaps,
    You mention that you want to create a DLL from a .C file. Just to clarify, are you using C (.c file) or C++ (.cpp) to write your code?
    Also, if you are using C++, are you using Visual Studio? (The reason I ask is because this forum is geared towards Measurement Studio, which is an add on to Microsoft Visual Studio).
    That being said,
    If you are using C: National Instruments provides an ANSI C Application Development Environment called LabWindows/CVI which makes building dlls a snap. It has templates for DLLs and you can build them either as stdcall or cdecl dlls.
    Developer Zone Tutorial: Building a DLL with LabWindows/CVI 8.5 for use with LabVIEW 8.5
    If you are using Visual C++: Look at the link that Al provided earlier.
    MSDN: Walkthrough: Creating and Using a Dynamic Link Library
    If you aren't using CVI or Visual Studio, then really the best bet is to do a google search for "Create C DLL" or post or a forum for the appropriate environment that you are using.
    Thanks!
    Message Edited by Jervin_J on 03-14-2009 02:02 PM
    Jervin Justin
    NI TestStand Product Manager

  • How to Create an XML document from XSQL servlet which follows a particular DTD struct

    how to Create an XML document from XSQL servlet which follows a particular DTD structure.Could anyone send me a sample code for this.

    You'll need to associate an XSLT transformation with your XSQL page that transforms the canonical result into your DTD-valid format.
    For example, given an XSQL page like:
    <?xml version="1.0"?>
    <?xml-stylesheet type="text/xsl" href="rss.xsl" ?>
    <xsql:query max-rows="3" connection="demo" xmlns:xsql="urn:oracle-xsql">
    select title,id,description,url,to_char(timestamp,'Mon DD') timestamp
    from site_entry
    order by id desc
    </xsql:query>and an "rss.xsl" stylesheet that looks like this:
    <?xml version="1.0"?>
    <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
    <xsl:output method="xml" indent="yes" doctype-system="rss-0.91.dtd"/>
    <xsl:template match="/">
    <xsl:for-each select="ROWSET/ROW">
    <rss version="0.91">
    <channel>
    <title>Do You XML?</title>
    <link>http://xml.us.oracle.com</link>
    <description>Oracle XML Website Demo</description>
    <language>en-us</language>
    <xsl:for-each select="ITEM">
    <item>
    <title><xsl:value-of select="TITLE"/></title>
    <link><xsl:value-of select="URL"/></link>
    <description><xsl:value-of select="DESCRIPTION"/></description>
    </item>
    </xsl:for-each>
    </channel>
    </rss>
    </xsl:for-each>
    </xsl:template>
    </xsl:stylesheet>You produce DTD-valid output against the rss-0.91.dtd DTD that looks like:
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <!DOCTYPE rss SYSTEM "rss-0.91.dtd">
    <rss version="0.91">
    <channel>
    <title>Do You XML?</title>
    <link>http://xml.us.oracle.com</link>
    <description>Oracle XML Website Demo</description>
    <language>en-us</language>
    </channel>
    </rss>
    <rss version="0.91">
    <channel>
    <title>Do You XML?</title>
    <link>http://xml.us.oracle.com</link>
    <description>Oracle XML Website Demo</description>
    <language>en-us</language>
    </channel>
    </rss>
    <rss version="0.91">
    <channel>
    <title>Do You XML?</title>
    <link>http://xml.us.oracle.com</link>
    <description>Oracle XML Website Demo</description>
    <language>en-us</language>
    </channel>
    </rss>

  • How to create a standby redolog from rac to non rac ??

    Hi,
    How to create a standby redolog from rac to non rac DR setup..???
    in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??
    pls help

    854393 wrote:
    Thanks Shivanandha,
    (maximum number of logfiles for each thread + 1) * maximum number of threads
    Using this equation reduces the likelihood that the primary instance's log writer (LGWR) process will be blocked because a standby redo log file cannot be allocated on the standby database. For example, if the primary database has 2 log files for each thread and 2 threads, then 6 standby redo log file groups are needed on the standby database.In maximum performance mode you can keep same number of redo logs but having one more redo log member for each thread is recommended and mandtory for other protection modes.
    How to create a standby redolog from rac to non rac DR setup..???
    in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??pls help
    Yes, even your DR is RAC or non-RAC, you must have both threads, because each instance information exist on own thread, So to perform redo transition from both the instances, you must have both standby redo log threads even though if it is non an RAC DR.
    Hope This helps.

  • How to create a boot disc from Lion pre installed into my Macbook Pro 2011 ?

    Hi guys,
    I want to know how to create a boot disc from Lion pre installed into my New Macbook Pro ?
    I want to re-install the Lion from zero. When I bougth it I´ve used the Migrant assitance and now I want to re-install the Lion. How can I do it ?
    thanks.

    Read this about creating a lion recovery on an external drive or USB stick.
    http://support.apple.com/kb/HT4848
    /Dennis

Maybe you are looking for

  • How do i turn my photos into a photo stock where each photo may appear under several titles/albums?

    Hi apple dudes, I have about 7500 photos on my work MacBook Pro and what I want to do with them is tag/label each one with up to 5 headings so that each photo could effectively appear in or under multiple albums. I am effectively trying to create a p

  • BAPI_PO_CHANGE not updating existing condition type value.

    Hi, I am using 'BAPI_PO_CHANGE' to update the existing condition records.           MOVE-CORRESPONDING wa_pocond_40 TO gt_pocond_40.           gt_pocond_40-change_id = 'U'.           gt_pocond_40-cond_value = '20'.           gt_pocondx_40-itm_number

  • [svn] 1536: -fix header

    Revision: 1536 Author: [email protected] Date: 2008-05-02 11:34:12 -0700 (Fri, 02 May 2008) Log Message: -fix header -junit check: the method 'suite' must be declared with a junit.framework.Test return type. ant main unit PASSES Modified Paths: blaze

  • Home move total disaster...losing the will to live

    Moved house 4 weeks ago and the BT move was a total disaster. I currently have a neighbours land line to my BT Acccount as well as my own. I can see all the calls they make, and I am being billed for them. I also have their Infinity attached to my ac

  • How do I disable "The connection to the server was reset" pop-up

    How can I disable the "The connection to the server was reset" pop-up message in Firefox? To my eyes, the webpage loads fine, so I don't give a hoot if the connection reset. Sometimes this 'stupid' message pops up 4-5 times on a single webpage, and t