How to create zero valued Schedule Agreement
What is the config required for enabling the creation of zero valued Schedule Agreement?
Thanks,
Kiran
Kiran Bhattiprolu wrote:
What is the config required for enabling the creation of zero valued Schedule Agreement?
>
> Thanks,
> Kiran
Then you have to maintain info record for material and vendor in that inforecord you have to maintain value then at the time of sheduling agreement sys will not ask the value it will be taken from info record automatically..
Thanking you
Similar Messages
-
How to Create an Input Schedule Comparison with Data Using EVDRE
Hello,
I try implement the scenario described in "How to Create an Input Schedule Comparison with Data Using EVDRE".
Once I am using the "Insert Function" from the panel and selecting the EVTIM function Excel crashes (see page 8 How to paper).
Systems:
BPC 7.0 NW SP02
Office 2007
BPCADminClient and BPCOfficeClient up to date
Have anyone a solution?
Thanks
OktayHi Oktay -
This function works in my BPC70NW SP02 system. Your issue might be that you are trying to access a TIME member that does not exist. Please make sure the offset value is a valid dimension member.
I can confirm that EVTIM does allow the offset for base members (such as 2009.MAY) as well as parent nodes (such as 2009.Q1 or 2008.TOTAL)... BUT...the offset result of the EVTIM function needs to be a valid dimension member!
Regards,
Sheldon -
BAPI to create and update scheduling agreement (type LZM) in ECC
Hi,
We have a requirement to create and update scheduling agreement of type LZM in ECC from an external system.
Is there a BAPI available for this in ECC 6.0 which can be used?
The integration is using PI.
Regards,
SrivatsanHello,
Please use the T-code "SE93" and then click on Display option after entering the T-code. After entering into the detail screen of the T-code, you shall find option to click on OBJECT LIST and then enter into the Function Group. Now enter the T-code and then click on function module and a list of function module will be displayed in referrence to the T-code.
For your easy reference i have also mentioned the flow.
SE93 --> Use tcode (eg. VA01) > display> Object list ---> Function Groups --> Tcode ---> Function module.
Regards,
Sarthak -
How to create a value only article and process it
pls tell me how to create a value only article, group article and
hierarchy article and process the same in Is-retailHi,
Pl use the following link:
http://help.sap.com/saphelp_ides/helpdata/en/fa/6a376542ef11d2a64b00104b57eaa3/frameset.htm
Regards,
S.V.ManiKumaar -
How to create charasteristic value variable step by step please?
How to create charasteristic value variable step by step please?
I searched the previous threads it is not listed.
I will assing points to only valuable information.
YorkHi Les,
http://help.sap.com/saphelp_nw04/helpdata/en/ac/789b3c4d4d8d15e10000000a114084/content.htm
In the left hand side of the query designer, find your char and under than there will be a button with text called Characteristic Value Variables. Right click this and choose New Variable. This will open the variable wizard. You need to follow the screen to define a technical name and description, the processing type, the user entry options and if the variable will accept single or multiple values, and also if you want to set a default value.
Hope this helps... -
How to know if a schedulling agreement is created via EDI
Hello,
I would like to konw if a schedulling agreement has been created via edi. Is there any field or any transaction where is indicated so?
Thanks a lot!
Regards,
JMadariagaHi,
in your title bar "Display scheduling agreement xxxxx", you should have a "Services for Object" icon
If this is not present, you may have to add it to your profile in SU01
(Just set SD_SWU_ACTIVE to X)
If the icon is there, click it
now a small toolbar should appear
If the "display relationships" icon is not greyed out, click it
You should now see all the idocs associated with this scheduling agreement
Hopefully, the first one is the idoc which created the scheduling agreement.
Also, if you just wish to see the last idoc associated with the scheduling agreement
.After you click the Fore Dl Sch tab or the JIT DlSh tab
Click the Dlv Sch Hdr
Then Click the "Curr Idoc" and you will see your current idoc.
kind regards
Paul Quinn -
How to make zero value deliveries not relevant for billing
Hi,
I have a requirement to not print invoices that have zero as their net value. Right now there is a sales order line category that can have amount on it sometimes and sometimes not. When the amount is 0, is there a way make it not due for billing?
In Item Categories Maintenace I set the Billing Relevant to H:
"H: Delivery-related billing - no zero quantities
You can use this category to avoid items with a value of zero being included in the billing document."
Testing it still includes the items with 0 value for this item category in VF04 - billing due list and creates an invoice for it.
Thanks,
SergiyHello
we will have the copy control routines in the copy control requirements between delivery and billing, check out the transaction VOFM , for example you can have a new copy control routine no 901 in VOFM. via which SAP creates a new program LV60A901 and you can have your code there. Get in touch with your programmer he/she should be knowing how to create this and how to include this in the main program..
Let me know if you need more information
Regards -
Creating PO Referencing Scheduling Agreement
Hi Guys,
This is the flow that i used.
ME51N (PR) -> ME31L (Scheduling agreement, reference the PO) -> PO
I am stuck at the PO part, how do you reference the PO document to the scheduling agreement?
I key in the scheduling agreement number at the outline agreement column it gives me an error
ThanksHi Ryan,
You can not proceed with Scheduling agreement in PO...
Purchase order will never be created wrt SA.
Once you create scheduling lines it will be traeted as PO.
Hope it clears!!!
Utsav..
Edited by: Utsav.agra on Apr 7, 2009 6:08 AM
Edited by: Utsav.agra on Apr 7, 2009 6:08 AM -
MIGO quantity defaulted as zero for Scheduling agreement
Hello,
I have created one scheduling agreement with type LPA.
Maintained the delivery schedule lines using me38.
Then have generated JIT schedule for the schedule lines.
But in the Schedule lines/release is not getting updated.
Hence, system is not proposing the open quantity in MIGO.
Please help in resolving the issue and suggest the configuration required for generating JIT schedule.Hi,
Compare and check - Goods receive datewith MIGO t.code and delivery date scheduled in t.code: ME38
Regards,
Biju K -
MRP supplier consignment create delivery for Scheduling Agreement
Hello,
We have a situation where MRP is used to calculate for a material which is subject to supplier consignment and also to scheduling agreement. When we run the MRP generates purchase requisitions for the consignment material , but it does not find the scheduling agreement for the material. We expected that it would create deliveries for the scheduling agreement.
The question is, is it possible to obtain deliveries from the MRP for the scheduling agreement?
Thanks a lot
IgnasiYes, it seems the problem was in Quota Arrangements which was not well defined for consignment material.
Thanks. -
BAPI Create delivery from scheduling agreement
Hello,
Does anyone have code to create a delivery referencing a scheduling agreement?
Thanks,
EvanI dont think there is a BAPI to create delivery from the schedule lines .
You can get the details of schedule lines from the VBEP table and use the FM BAPI_OUTB_DELIVERY_CREATE_SLS.
This becomes very cumbersome in case there are partial deliveries per schedule line. -
How to create an Event & schedule a rpt based on results of that Event..
Help,
I need to schedule a report, that will run after an event is done. I only want the rpt to run if the event produces more than 1 record.
I dont know how to create an event? I am assuming I can use a SQL qry as an event. I would like to use:
select count(*) as RegCounts from [reg contact log]
where [due date] = date() +1 and [response due]=Yes
ErinHelp,
I need to schedule a report, that will run after an event is done. I only want the rpt to run if the event produces more than 1 record.
I dont know how to create an event? I am assuming I can use a SQL qry as an event. I would like to use:
select count(*) as RegCounts from [reg contact log]
where [due date] = date() +1 and [response due]=Yes
Erin -
How to suppress zero values in EVDRE Report?
Hello.
In my EVDRE Report I need zero values to be suppressed.
But SAP BPC NW 7.0 Help says that
The system does not suppress rows or columns returning a zero (where a zero amount is stored in the database)
So how can I suppress zero values?
P.S. In SAP BPC 7.0 for Microsoft platform "Suppress" parameter suppresses both zero and NULL values just like I need.
Thanks.I have next options in EVDRE ExpandRange:
PARAMETER EXPANSION 1 EXPANSION 2
ExpandIn COL ROW
Dimension TIME P_ACTIVITY
MemberSet DEP BASMEMBERS
BeforeRange
AfterRange
Suppress Y
Insert
And my result is
2009.JAN 2009.FEB 2009.MAR
EMPL1 1,00 1,00 1,00
EMPL2 1,00 1,00 1,00
EMPL3 1,00 1,00 1,00
PC 1,00 1,00 1,00
SQM 1,00 1,00 1,00
LABMAN 0,00 0,00 0,00
LABPRD 0,00 0,00 0,00
MACHRS 0,00 0,00 0,00
MAINT 0,00 0,00 0,00
NONE 0,00 0,00 0,00
MACH1 0,00 0,00 0,00
MACH2 0,00 0,00 0,00
MACH3 0,00 0,00 0,00
As you can see zero rows present.
I'm on SAP BPC 7.0 NW SP7. -
How ro delete/cancel procurement Scheduling Agreement Release in APO system
Hi,
Can you please tell me the ways to delete procurement schedule agreement release in APO system.
I have gone through the thread "How to delete the old schedule line release? and found two transactions but it seems both the transactions like /sapapo/cmds_del & sappao/cmds_sc02 are used for sales scheduling agreement release deletion.
The system is not allowing me to delete the same in APO system as these are APO scheduling agreements.
Please help me on the same.Thanks in advance.Revert back if any further clarification is required.
regards,
kaushikHi,
Thanks for your reply again.
The /SAPAPO/DELETE_PP_ORDER program does not select the release schedule lines though it selects the Scheduling Agreement Schedule Line (Not released) for deletion.
The transaction /SAPAPO/PWBSRC2 for Deleting External Procurement Relationship but as long as the released schedule line exists , it is not possible to delete the scheduling agreements.
I have gone through the help.sap.com site and I was not able to found anything about deletion or cancel/closing of Scheduling Agreement Release.
Still waiting for the solution.
regards,
kaushik -
How the accesses priview of schedule agreement
how to view the print preview for the schedule agreement
plz give your replys
K.Raghuram
Edited by: k Raghuram on Aug 27, 2008 2:26 PMHi,
Go to ME9L - Print/Transmit Scheduling Agreements
Here enter the proper selection and execute
In the output screen, click on "Display Message" to see the Print Preview
And click on "Output message" to print the SA Document
Maybe you are looking for
-
Hi, Are there any standard reports in SAP by which one can evaluate cost of stock outs.If Not is there any workaround? Pls help. Regards Milind Nair
-
TS3402 iMac with OS X 10.8.4 will not stay in sleep mode.
After installing latest OS updates, 10.8.4, we cannot get our iMac to stay in sleep mode. Energy saving settings have computer sleep and display sleep set to15 minutes, put hard disks to sleep when possible and allow power button to put to sleep ar
-
Configuring Kodo default implementation for field of Collection type
If I am not mistaken default implementation for field of Collection type in Kodo is LinkedList based proxy. It would be great if it were possible to configure Kodo to use a proxy of my choosing I did some tests and it seems to me that ArrayList is mu
-
Block Invoice creation for missing condition type
Hi, We need to put a chek on the Invoice process, wherein if particular condition type is missing in the relation to sales order, than the Invoice should not get created. For example- If Order A - has condition type PR00 which gets fecthed from the c
-
After a itunes update my HDV mov files won't play on my mac.
I applied and update to my MacBook pro and BAM!! Now my HDV.mov files won't play with QuickTime or final cut pro. I'm in the middle of a project and I can't finish it because when the files play in fcp I get a error. Can anybody help me with this?