How to created a new movement type?

Hi friends,
We have a scenario which require stock moved from Return to Unrestriced. However, I haven't found any one step movement type to accomplish the job. I have to use two steps transfer, first Return to QI (457) then QI to unrestricted (321), My question is : If it's possible for me to configure a new movement type to transfer stock from return to unrestricted directly. If yes, how to do it?
Thanks in advance for your help.
Linda

Dear Linda,
1) i have never Created new movement type
2) just i am suggesting this, go to OMJJ
3) Now system will ask for movement type, tick it & eneter
4) Next screen do not give anything just enter
5) Now you will get all Movement types
6) just copy existing one & give required number
Coming to other parameters just check with MM experts
Plz wait for experts replies
Regards
kumar

Similar Messages

  • Create a new Movement Type wrt 101

    Hello colleagues ,
    I want to create a new movement type same as 101 , and want that when I will do goods receipt with reference to Purchase order instead of Movement type 101 my new movement should be selected by the system.
    I know how to copy the new movement but when  I am doing GR wrt PO 101 is selected  and not the new movement ?
    Please help me !
    Thanks a lot !
    regards
    Shashank

    Hello All ,
    These solutions will work  fine as such !
    But see this :
    If I do VL02N for a Delivery (This is created wrt to STO ) and in Customizing set it one step procedure .
    Then the default behaviour of system is it will do first 647 Mvt then this will be followed by 101 Mvt
    when the PGI will be done.
    Now I copy the Mvt type for 647  as  X11 and  for 101 as Y11 .
    So now when I do VL02N , the system should post X11 and Y11 , and not 647 and 101 ??
    Can you please help me further ?
    Thanks for the contribution !
    Regards
    Shashank

  • How to create a new output type in inventory management

    dear consultants .
    how to create a new output type in inventory management...........?
    please give me a solution
    regards
    ratan

    Refer:
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/attaching-smartform-to-the-standard-transaction-2316027

  • How to create a new wage type in IT0014 and assign the GL?

    Dear Gurus
    Please guide me about Creating of new wage Type in 14.
    My client wants to add a new wage type says:-1HRR ( Honorarium)  &  assign  the same to  Training Expenses GL account and order number. How to do it. Please guide.
    Regards
    Vikas K Sharma

    To copy a standard WT and assign a new name with the same attributes and characterstics:
    IMG > Personnel Management> Personnel Administration> Payroll data> Recurring Payments and Deductions. Copy any standard Wage Type.
    Check assignment of WT to a Symbolic Account :
    (The WT will inherit the Symbolic account from the copeid standard WT)
    Go through SM30 to Table V_T52EL_NOFM. Make neccessary changes to the Symbolic account, if needed.
    To create a new Symbolic Account and assign it to the WT:
    Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the HR-System --> Employee grouping and symbolic accounts --> Define symbolic accounts
    To assign the WT to the new symbolic account (same as table V_T52EL_NOFM):
    Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the HR-System --> Wage Type Maintenance --> Define WT posting attributes
    To assign a symbolic account to a G/L or Check the assignment of Sym Acc to G/L:
    Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the AC-System -->Account Assignment --> Assign expense accounts.
    Hope this helps.
    Soujanya.

  • How to create a new transaction type to create Lead

    I have tried to to create a new transaction type to create Lead. But after putting all the relevant data an error showing "Enter an Organizational Unit(Sales)" is reflected.Can't really find out what kind of Error is this and how to fix it?

    Hi,
    Maybe you must assign this org. in partner tab.
    Best regards,
    Caíque Escaler

  • How to create a new document type for PO and Requisition

    Hi All
    Can you please help me with the steps of creating a new document type for PO and PR. Also the steps that need to be update for the procure pay cycle to work properly. 
    Once the document type is been created. I want to create the PO referecing the new PR and PO document type.I am new in MM.
    Thanks, Ros

    Hi,
    1. You can create new PR and PO docu types at the following path:
    For PR docu type:
    First you need to create number range for docu type or you can use existing number range also. The path for creation of no. range is
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Number Ranges
    Then create PR docu type at below path and assign no. range to PR docu type here only
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types
    For PO docu type:
    Follow same procedure as mentioned for PR docu type. Path is
    SPRO>Materials Management->Purchasing->Purchase Order->Define Number Ranges
    SPRO>Materials Management>Purchasing->Purchase Order->Define Document Types
    If you want to create PO referencing new PR docu type, link the PR docu type to PO docu type at below path:
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types--> Link purchase requisition - document type
    Regards
    Chetan

  • How to create a new condition type for palets

    Hello Gurus,
    I want to create a new condition type to order material palets (like LP02) but I need to calculate a discount in % for entire palets only.
    By example:
    A discount of 5% for each completed palets.
    I order 1 palet for 100euros, I want a discount of 5 euros, and final price is 95euros.
    I order 1,5 palets for 150 euros, I want a discount of 5 euros and final price is 145 euros (100-5% + 50) and not 142,5euros (150-5%).
    I order 2 palets for 200 euros, I want a discount of 10 euros and final price is 190euros
    I tried with a fixed amount calculation type and it works fine, I have a discount only for entire palets. But when I tried with percentage calculation type, it doesn't work.
    Any Idea?
    Thank you for your help
    Gregory

    Hi,
    In the pricing procedure config, you will have to create a new formula under the AltCBV (Alternative formula for condition base value) column.  The base quantity should be
    Order Qty DIV 1
    That will give you the effect of truncating the decimals.   Suggest you get an ABAPer to have a look for you.
    Phyllis.

  • Error while creating new Movement Type

    All SAP Gurus,
    We are creating a new Z movement type by copying the 101 movement type (T code: OMJJ).
    But system is not allowing to create a new movement type and giving an error message as 'Specify the key within the work area'.
    We are unable to create a new movement type due to this error.
    Please help...................
    Regards,

    How did solve the problem
    plz let me know
    thanks.

  • Error In Creating New Movement Type

    Hi,
    To upload the Consignee Stock, we have created a new Movement Type, say Z01 & Z02 copying the Movement Type 701 & 702.
    We are able to upload the Stock using Z01 with correct FI Entry.
    While doing the reversal, the following error is encountered:
    The mvt type in the reference docmt cannot be converted
    Message no. MIGO029
    Diagnosis
    You want to post a goods movement but the movement type that you want to use for the posting has not been maintained completely in the system.
    Possible causes are:
    The movement type is not permitted for this transaction.
    No subsequent movement type has been defined.
    You do not have authorization to post a goods movement using this movement type.
    Procedure
    Check your screen and field values.
    If you do not have sufficient authorization, contact your system administrator.
    If a movement type has not been maintained completely, the missing data must be maintained in Customizing for Inventory Management.
    Make the appropriate settings in Customizing as necessary or inform your system administrator.
    Pls. advise what to do?
    Regards,
    P K Karn

    While exploring the Mov Type 701 & 702, I came to know that 702 is not the REVERSAL of 701 as I normally assume, hence I would be wrong if we think of 702 as reversal for 701.
    Also I came to know that reversal is not possible for the documents created thru Physical Inventory i.e. using Mov Type 701.
    Basis the above observations, I can conclude that I am going on a wrong track.
    But still I am not able to find out the solutions.
    I don't to use 501, as it will generate the FI Entries which I don't want.
    Hoping some quick answers from you people.
    Also would like to request to stop me, if my LOGIC is wrong.
    Regards,

  • Create new Movement type - combination of 343 E and 411 E

    The situation at client is that the stock is initially in "Sales Order BLOCKED status". It needs to be moved to Unrestricted Own stock. So we are performing 343 E to move from blocked to unrestricted and then 411 E to move from Sales order stock to own stock. So to post these two movement types we get two idocs for each batch. In order to decrease the volume of idocs & idoc error handling we want to create a new movement type that can move from Sales Order blocked stock to unrestricted own stock.
    In OMJJ i can make a copy of 343 E but i need to make changes to the "Posting string for quantities - BUSTM" for MAAV or MAV4 and others. I need to know what values need to be updated in T156M especially and also in any other 156* tables.
    Thanks

    You cannot combine 2 movement types. you can only do what SAP has forseen. OMJJ does not allow to create a movement type from scratch. You can only create a new movement by copy of an existing, hence you cannot create new functionality.
    beside of some table settings in T156... tables, there must be the logic in the programs  to consider what you try to achieve.
    And  this is not the case. You are not supposed to change anything on SAP posting strings.

  • Accounting Document for New Movement Type

    Good day!
    Here's the scenario: I have created a new movement type in SPRO. I just copied from the existing movement type closely related to what I wanted to create. I executed the transaction in MB1C and it went well and generated a Material Document number. When I viewed the Material Document number in MB03, it has no Accounting Document number. Is there any config that i missed? How can I relate this transaction to accounting?
    Thank you for your assistance.

    hi
    first check which movement type u have copied .
    now check is ur material is valuated for the plant
    now in OMJJ go to ur movemnttype  and in update control u should have value and quantity update entry
    also check if u have used the po as free or if it is initial entry then check ur material master price
    hope it hellp
    regards
    kunal

  • Error during creation of new movement types

    hi frnds,
        while creating a new movement type for 311 with z11....in help text tab..it is showing an error..
    " Entry HULIST does not exist in TSTC (check entry) "...how do i resolve this.
    Regards,
    Prasath

    Hey while copying the movement type to another use OMJJ
    If any table entry is missing that can be maintained in SM30
    Check it out
    Regards,
    Raman

  • PURPOSE OF CREATION OF NEW MOVEMENT TYPE

    Hello Experts,
    Can you please tell me the purpose of creating a new movement type with the description.
    Thanks and Regards
    Nilu S.

    Hi,
    Movement type determines the treatment of any Stock in terms of Qty & Value. SAP has provided the standard MVt type for use in  different business scenario.
    How a Mvt Type Works  is important to understand the requirement of new Mvt type -
    a. in material master we are assigning the Val. Class, We are assigning the GL a/c  with Valuation class in combination with General account modifier in OBYC like GBB >> VBR>> ValClass>> GL A/c.
    b. Each valuation class is linked to multiple General account modifier Key and GL a/c (as per our business requirement).
    c. Each movement type is assigned with Account modifier key in IMG Customising.
    So when ever we enter a material & Mvt type in any transaction system determine the GL A/c to be for Automatic posting through Account modifer Key (From OMJJ & OBYC).
    So you can see, there is limitation of GL assignment for automatic posting in OBYCfor each business scenario.
    if requirement of diff. accounting arises for a material with same valuation class, we need to Create new Mvt type & Account modifier key. This new Account modifier key will be linked to New GL in combination with Val. Class.
    Hope  above explanation satisfy your query.
    Regards,
    Ranjan Kumar

  • Creation of new movement type and condition type

    Hi experts,
                       I am going to create a new movement type and the new condition type. Please suggest me how to create and implement it.
    Thanks
    Harmandeep

    Please check these answered links:
    Create a new movement type
    Create Movement Type Error
    When we need to create a new movement type?
    can we a create a  condition type for  PO
    Create new condition type with respective GL acc. for PO
    Re: Condition type

  • New movement types required for Consignment

    Hi Friends,
    Need help related to Consignment Movement Type:
    in Fill up Process KB/CF my client wants the goods to be in 'Transit' and then next step to Fillup.
    Similarly in returns, we wanted the goods to be first to be reflected in 'QI' (MMBE/MB58) and then to be moved to consignment stock.
    unline 631/634..are there any movement types that can fix this issue?..if we have to create a new movement type what type can be copied and stored for my client specific requirement.
    Thank you
    Ravi

    1)  my client wants the goods to be in 'Transit'
    2)  WE used standard process
    If the second comment cited above fulfills the first one, can you please let me know how you have achieved this.  To the best of my knowledge, in consignment fillup process, we cannot see the "Stock in Transit".  Once fillup delivery is made via 631 movement type, the unrestricted stock moves to "Cust.consignment".
    thanks
    G. Lakshmipathi

Maybe you are looking for